Home
last modified time | relevance | path

Searched +full:read +full:- +full:only (Results 1 – 25 of 1096) sorted by relevance

12345678910>>...44

/Linux-v6.1/sound/firewire/dice/
Ddice-interface.h1 /* SPDX-License-Identifier: GPL-2.0 */
10 * Generally, all registers can be read like memory, i.e., with quadlet read or
11 * block read transactions with at least quadlet-aligned offset and length.
12 * Writes are not allowed except where noted; quadlet-sized registers must be
15 * All values are in big endian. The DICE firmware runs on a little-endian CPU
16 * and just byte-swaps _all_ quadlets on the bus, so values without endianness
17 * (e.g. strings) get scrambled and must be byte-swapped again by the driver.
32 * size values are measured in quadlets. Read-only.
50 * Stores the full 64-bit address (node ID and offset in the node's address
60 * A bitmask with asynchronous events; read-only. When any event(s) happen,
[all …]
/Linux-v6.1/Documentation/ABI/testing/
Dsysfs-platform-dfl-fme1 What: /sys/bus/platform/devices/dfl-fme.0/ports_num
5 Description: Read-only. One DFL FPGA device may have more than 1
7 number of ports on the FPGA device when read it.
9 What: /sys/bus/platform/devices/dfl-fme.0/bitstream_id
13 Description: Read-only. It returns Bitstream (static FPGA region)
17 What: /sys/bus/platform/devices/dfl-fme.0/bitstream_metadata
21 Description: Read-only. It returns Bitstream (static FPGA region) meta
25 What: /sys/bus/platform/devices/dfl-fme.0/cache_size
29 Description: Read-only. It returns cache size of this FPGA device.
31 What: /sys/bus/platform/devices/dfl-fme.0/fabric_version
[all …]
Dsysfs-driver-ufs3 Contact: linux-scsi@vger.kernel.org
5 This file contains the auto-hibernate idle timer setting of a
6 UFS host controller. A value of '0' means auto-hibernate is not
11 10-bit values with a power-of-ten multiplier which allows a
23 The file is read only.
33 The file is read only.
43 The file is read only.
54 The file is read only.
64 The file is read only.
75 The file is read only.
[all …]
Dsysfs-platform-dfl-port1 What: /sys/bus/platform/devices/dfl-port.0/id
5 Description: Read-only. It returns id of this port. One DFL FPGA device
9 What: /sys/bus/platform/devices/dfl-port.0/afu_id
13 Description: Read-only. User can program different PR bitstreams to FPGA
18 What: /sys/bus/platform/devices/dfl-port.0/power_state
22 Description: Read-only. It reports the APx (AFU Power) state, different APx
24 returns "0" - Normal / "1" - AP1 / "2" - AP2 / "6" - AP6.
26 What: /sys/bus/platform/devices/dfl-port.0/ap1_event
30 Description: Read-write. Read this file for AP1 (AFU Power State 1) event.
34 What: /sys/bus/platform/devices/dfl-port.0/ap2_event
[all …]
Dsysfs-class-cxl11 Contact: linuxppc-dev@lists.ozlabs.org
12 Description: read only
22 Contact: linuxppc-dev@lists.ozlabs.org
23 Description: read/write
29 Users: https://github.com/ibm-capi/libcxl
33 Contact: linuxppc-dev@lists.ozlabs.org
34 Description: read only
39 Users: https://github.com/ibm-capi/libcxl
43 Contact: linuxppc-dev@lists.ozlabs.org
44 Description: read only
[all …]
Dsysfs-class-watchdog5 It is a read only file. It contains status of the watchdog
13 It is a read only file. It contains identity string of
20 It is a read/write file. While reading, it gives '1'
32 It is a read only file. It gives active/inactive status of
39 It is a read only file. It contains watchdog device's
47 It is a read only file. It contains value of time left for
55 It is a read only file. It is read to know about current
62 It is a read only file. It specifies the time in seconds before
70 It is a read only file. It shows the pretimeout governors
77 It is a read/write file. When read, the currently assigned
[all …]
Dsysfs-class-switchtec1 switchtec - Microsemi Switchtec PCI Switch Management Endpoint
3 For details on this subsystem look at Documentation/driver-api/switchtec.rst.
6 Date: 05-Jan-2017
14 What: /sys/class/switchtec/switchtec[0-9]+/component_id
15 Date: 05-Jan-2017
19 (read only)
23 What: /sys/class/switchtec/switchtec[0-9]+/component_revision
24 Date: 05-Jan-2017
27 Description: Component revision stored in the hardware (read only)
31 What: /sys/class/switchtec/switchtec[0-9]+/component_vendor
[all …]
Dsysfs-block-zram5 The disksize file is read-write and specifies the disk size
14 The initstate file is read-only and shows the initialization
21 The reset file is write-only and allows resetting the
29 The max_comp_streams file is read-write and specifies the
37 The comp_algorithm file is read-write and lets to show
45 The mem_used_max file is write-only and is used to reset
48 "0". Otherwise, you could see -EINVAL.
55 The mem_limit file is write-only and specifies the maximum
64 The compact file is write-only and trigger compaction for
72 The io_stat file is read-only and accumulates device's I/O
[all …]
Dsysfs-driver-intel-m10-bmc-sec-update1 What: /sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_root_entry_hash
5 Description: Read only. Returns the root entry hash for the static
7 string: "hash not programmed". This file is only
11 What: /sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/pr_root_entry_hash
15 Description: Read only. Returns the root entry hash for the partial
18 is only visible if the underlying device supports it.
21 What: /sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/bmc_root_entry_hash
25 Description: Read only. Returns the root entry hash for the BMC image
27 "hash not programmed". This file is only visible if the
31 What: /sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_canceled_csks
[all …]
Dconfigfs-usb-gadget-uvc1 What: /config/usb-gadget/gadget/functions/uvc.name
7 streaming_maxburst 0..15 (ss only)
13 What: /config/usb-gadget/gadget/functions/uvc.name/control
18 All attributes read only:
25 What: /config/usb-gadget/gadget/functions/uvc.name/control/class
30 What: /config/usb-gadget/gadget/functions/uvc.name/control/class/ss
35 What: /config/usb-gadget/gadget/functions/uvc.name/control/class/fs
40 What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal
45 What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output
50 What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output/default
[all …]
Dsysfs-class-firmware-attributes1 What: /sys/class/firmware-attributes/*/attributes/*/
13 and will accept UTF-8 input.
16 A file that can be read to obtain the type of attribute.
21 - enumeration: a set of pre-defined valid values
22 - integer: a range of numerical values
23 - string
28 A file that can be read to obtain the current
37 A file that can be read to obtain the default
41 A file that can be read to obtain a user friendly
45 A file that can be read to obtain
[all …]
/Linux-v6.1/arch/arm/mach-pxa/
Dregs-uart.h1 /* SPDX-License-Identifier: GPL-2.0 */
5 #include "pxa-regs.h"
13 #define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
14 #define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
15 #define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
16 #define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
17 #define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
18 #define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
19 #define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
20 #define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
[all …]
/Linux-v6.1/include/uapi/linux/
Dvirtio_mmio.h42 /* Magic value ("virt" string) - Read Only */
45 /* Virtio device version - Read Only */
48 /* Virtio device ID - Read Only */
51 /* Virtio vendor ID - Read Only */
55 * (32 bits per set) - Read Only */
58 /* Device (host) features set selector - Write Only */
62 * (32 bits per set) - Write Only */
65 /* Activated features set selector - Write Only */
69 #ifndef VIRTIO_MMIO_NO_LEGACY /* LEGACY DEVICES ONLY! */
71 /* Guest's memory page size in bytes - Write Only */
[all …]
/Linux-v6.1/Documentation/filesystems/spufs/
Dspufs.rst1 .. SPDX-License-Identifier: GPL-2.0
10 spufs - the SPU file system
26 logical SPU. Users can change permissions on those files, but not actu-
43 The files in spufs mostly follow the standard behavior for regular sys-
44 tem calls like read(2) or write(2), but often support only a subset of
49 All files that support the read(2) operation also support readv(2) and
52 only the st_mode, st_nlink, st_uid and st_gid fields of struct stat
55 All files support the chmod(2)/fchmod(2) and chown(2)/fchown(2) opera-
57 possible operations, e.g. read access on the wbox file.
68 read(2), pread(2), write(2), pwrite(2), lseek(2)
[all …]
/Linux-v6.1/Documentation/admin-guide/
Dufs.rst5 mount -t ufs -o ufstype=type_of_ufs device dir
20 default value, supported as read-only
24 supported as read-write
28 supported as read-write
35 supported as read-write
39 supported as read-write
42 used in HP-UX
43 supported as read-only
47 supported as read-only
49 nextstep-cd
[all …]
/Linux-v6.1/Documentation/filesystems/
Dzonefs.rst1 .. SPDX-License-Identifier: GPL-2.0
4 ZoneFS - Zone filesystem for Zoned block devices
11 as a file. Unlike a regular POSIX-compliant file system with native zoned block
15 of the file (append only writes).
18 than to a full-featured POSIX file system. The goal of zonefs is to simplify
22 example of this approach is the implementation of LSM (log-structured merge)
31 -------------------
38 conventional zones. Any read or write access can be executed, similarly to a
62 by sub-directories. This file structure is built entirely using zone information
63 provided by the device and so does not require any complex on-disk metadata
[all …]
/Linux-v6.1/Documentation/ABI/stable/
Dsysfs-driver-mlxreg-io1 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
6 0 - health failed, 2 - health OK, 3 - ASIC in booting state.
8 The files are read only.
10 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
11 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
18 The files are read only.
20 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
25 forward direction - relevant bit is set 0;
26 reversed direction - relevant bit is set 1.
28 The files are read only.
[all …]
/Linux-v6.1/arch/powerpc/boot/dts/fsl/
Dp1022ds.dtsi2 * P1022 DS Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
46 label = "ramdisk-nor";
47 read-only;
52 label = "diagnostic-nor";
53 read-only;
[all …]
Dp1020rdb.dtsi2 * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
4 * Copyright 2011-2012 Freescale Semiconductor Inc.
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
48 label = "NOR (RO) Vitesse-7385 Firmware";
49 read-only;
56 read-only;
[all …]
/Linux-v6.1/fs/nls/
DKconfig1 # SPDX-License-Identifier: GPL-2.0-only
23 default "iso8859-1"
31 cp949, cp950, cp1251, cp1255, euc-jp, euc-kr, gb2312, iso8859-1,
32 iso8859-2, iso8859-3, iso8859-4, iso8859-5, iso8859-6, iso8859-7,
33 iso8859-8, iso8859-9, iso8859-13, iso8859-14, iso8859-15,
34 koi8-r, koi8-ru, koi8-u, sjis, tis-620, macroman, utf8.
35 If you specify a wrong value, it will use the built-in NLS;
36 compatible with iso8859-1.
38 If unsure, specify it as "iso8859-1".
45 in so-called DOS codepages. You need to include the appropriate
[all …]
/Linux-v6.1/drivers/net/ethernet/ti/
Ddavinci_cpdma.h1 /* SPDX-License-Identifier: GPL-2.0 */
102 CPDMA_TX_RLIM, /* read-write */
103 CPDMA_CMD_IDLE, /* write-only */
104 CPDMA_COPY_ERROR_FRAMES, /* read-write */
105 CPDMA_RX_OFF_LEN_UPDATE, /* read-write */
106 CPDMA_RX_OWNERSHIP_FLIP, /* read-write */
107 CPDMA_TX_PRIO_FIXED, /* read-write */
108 CPDMA_STAT_IDLE, /* read-only */
109 CPDMA_STAT_TX_ERR_CHAN, /* read-only */
110 CPDMA_STAT_TX_ERR_CODE, /* read-only */
[all …]
/Linux-v6.1/drivers/misc/mei/
Dhw-me-regs.h1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
3 * Copyright (c) 2003-2022, Intel Corporation. All rights reserved.
53 #define MEI_DEV_ID_LPT_W 0x8D3A /* Lynx Point - Wellsburg */
135 /* H_CB_WW - Host Circular Buffer (CB) Write Window register */
137 /* H_CSR - Host Control Status register */
139 /* ME_CB_RW - ME Circular Buffer Read Window register (read only) */
141 /* ME_CSR_HA - ME Control Status Host Access register (read only) */
143 /* H_HGC_CSR - PGI register */
145 /* H_D0I3C - D0I3 Control */
154 /* Host Circular Buffer Depth - maximum number of 32-bit entries in CB */
[all …]
/Linux-v6.1/Documentation/sound/cards/
Dhdspm.rst2 Software Interface ALSA-DSP MADI Driver
5 (translated from German, so no good English ;-),
7 2004 - winfried ritsch
11 the Controls and startup-options are ALSA-Standard and only the
19 ------------------
21 * number of channels -- depends on transmission mode
24 use for a lower number of channels is only resource allocation,
27 scaled. (Only important for low performance boards).
29 * Single Speed -- 1..64 channels
33 receiver, only 56 are transmitted/received over the MADI, but
[all …]
/Linux-v6.1/arch/arm/boot/dts/
Dqcom-ipq4018-ap120c-ac.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
8 model = "ALFA Network AP120C-AC";
9 compatible = "alfa-network,ap120c-ac";
12 compatible = "gpio-keys";
14 key-reset {
27 drive-strength = <16>;
28 bias-disable;
[all …]
/Linux-v6.1/drivers/comedi/drivers/
Dplx9080.h1 /* SPDX-License-Identifier: GPL-2.0+ */
26 * struct plx_dma_desc - DMA descriptor format for PLX PCI 9080
32 * Describes the format of a scatter-gather DMA descriptor for the PLX
33 * PCI 9080. All members are raw, little-endian register values that
37 * The DMA descriptors must be aligned on a 16-byte boundary. Bits 3:0
112 /* PCI Read No Write Mode */
114 /* PCI Read with Write Flush Mode */
118 /* PCI Read No Flush Mode */
137 /* Big Endian Byte Lane Mode - use most significant byte lanes */
149 * Note: The Expansion ROM stuff is only relevant to the PC environment.
[all …]

12345678910>>...44