/Linux-v6.1/arch/arm64/boot/dts/nvidia/ |
D | tegra210-p2571.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include "tegra210-p2530.dtsi" 12 pinctrl-names = "boot"; 13 pinctrl-0 = <&state_boot>; 20 nvidia,enable-input = <TEGRA_PIN_ENABLE>; 21 nvidia,open-drain = <TEGRA_PIN_DISABLE>; 22 nvidia,io-hv = <TEGRA_PIN_DISABLE>; 29 nvidia,enable-input = <TEGRA_PIN_DISABLE>; [all …]
|
D | tegra210-p2595.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 7 pinctrl-names = "boot"; 8 pinctrl-0 = <&state_boot>; 16 nvidia,enable-input = <TEGRA_PIN_DISABLE>; 17 nvidia,open-drain = <TEGRA_PIN_DISABLE>; 18 nvidia,io-hv = <TEGRA_PIN_ENABLE>; 25 nvidia,enable-input = <TEGRA_PIN_ENABLE>; 26 nvidia,open-drain = <TEGRA_PIN_DISABLE>; 27 nvidia,io-hv = <TEGRA_PIN_ENABLE>; 34 nvidia,enable-input = <TEGRA_PIN_ENABLE>; [all …]
|
D | tegra210-p2597.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 2 #include <dt-bindings/input/input.h> 20 avdd-dsi-csi-supply = <&vdd_dsi_csi>; 30 avdd-io-hdmi-dp-supply = <&avdd_1v05>; 31 vdd-hdmi-dp-pll-supply = <&vdd_1v8>; 32 hdmi-supply = <&vdd_hdmi>; 34 nvidia,ddc-i2c-bus = <&hdmi_ddc>; 35 nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) 41 pinctrl-names = "boot"; 42 pinctrl-0 = <&state_boot>; [all …]
|
D | tegra210-p2894.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 #include <dt-bindings/input/input.h> 4 #include <dt-bindings/input/gpio-keys.h> 5 #include <dt-bindings/mfd/max77620.h> 6 #include <dt-bindings/pinctrl/pinctrl-tegra.h> 16 stdout-path = "serial0:115200n8"; 26 pinctrl-names = "boot"; 27 pinctrl-0 = <&state_boot>; 35 nvidia,enable-input = <TEGRA_PIN_DISABLE>; 36 nvidia,open-drain = <TEGRA_PIN_DISABLE>; [all …]
|
D | tegra210-smaug.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/mfd/max77620.h> 6 #include <dt-bindings/pinctrl/pinctrl-tegra.h> 12 compatible = "google,smaug-rev8", "google,smaug-rev7", 13 "google,smaug-rev6", "google,smaug-rev5", 14 "google,smaug-rev4", "google,smaug-rev3", 15 "google,smaug-rev2", "google,smaug-rev1", 25 stdout-path = "serial0:115200n8"; [all …]
|
/Linux-v6.1/arch/arm/boot/dts/ |
D | nuvoton-npcm730-gsj-gpio.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 gpio0pp_pins: gpio0pp-pins { 8 bias-disable; 9 drive-push-pull; 11 gpio1pp_pins: gpio1pp-pins { 13 bias-disable; 14 drive-push-pull; 16 gpio2pp_pins: gpio2pp-pins { 18 bias-disable; 19 drive-push-pull; [all …]
|
D | ste-href-tvk1281618-r2.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 6 #include <dt-bindings/interrupt-controller/irq.h> 7 #include <dt-bindings/input/input.h> 11 compatible = "gpio-keys"; 12 #address-cells = <1>; 13 #size-cells = <0>; 14 vdd-supply = <&ab8500_ldo_aux1_reg>; 15 pinctrl-names = "default"; 16 pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>; 37 interrupt-parent = <&gpio6>; [all …]
|
D | stm32mp13-pinctrl.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved 6 #include <dt-bindings/pinctrl/stm32-pinfunc.h> 9 i2c1_pins_a: i2c1-0 { 13 bias-disable; 14 drive-open-drain; 15 slew-rate = <0>; 19 i2c1_sleep_pins_a: i2c1-sleep-0 { 26 i2c5_pins_a: i2c5-0 { 30 bias-disable; [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/i2c/ |
D | i2c-gpio.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Wolfram Sang <wsa@kernel.org> 13 - $ref: /schemas/i2c/i2c-controller.yaml# 18 - const: i2c-gpio 20 sda-gpios: 23 active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) 24 from <dt-bindings/gpio/gpio.h> since the signal is by definition [all …]
|
/Linux-v6.1/Documentation/driver-api/gpio/ |
D | intro.rst | 16 - The descriptor-based interface is the preferred way to manipulate GPIOs, 18 - The legacy integer-based interface which is considered deprecated (but still 21 The remainder of this document applies to the new descriptor-based interface. 23 integer-based interface. 29 A "General Purpose Input/Output" (GPIO) is a flexible software-controlled 37 System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every 38 non-dedicated pin can be configured as a GPIO; and most chips have at least 43 Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS 48 - Output values are writable (high=1, low=0). Some chips also have 50 value might be driven, supporting "wire-OR" and similar schemes for the [all …]
|
D | consumer.rst | 6 it describes the new descriptor-based interface. For a description of the 7 deprecated integer-based GPIO interface please refer to legacy.rst. 23 - Simple compile coverage with e.g. COMPILE_TEST - it does not matter that 27 - Truly optional GPIOLIB support - where the driver does not really make use 28 of the GPIOs on certain compile-time configurations for certain systems, but 29 will use it under other compile-time configurations. In this case the 33 All the functions that work with the descriptor-based GPIO interface are 43 With the descriptor-based interface, GPIOs are identified with an opaque, 44 non-forgeable handler that must be obtained through a call to one of the 60 see Documentation/driver-api/gpio/board.rst [all …]
|
D | driver.rst | 26 between 0 and n-1, n being the number of GPIOs managed by the chip. 29 example if a system uses a memory-mapped set of I/O-registers where 32 GPIO 30 lines are handled by one bit per line in a 32-bit register, it makes sense to 44 So for example one platform could use global numbers 32-159 for GPIOs, with a 46 global numbers 0..63 with one set of GPIO controllers, 64-79 with another type 47 of GPIO controller, and on one particular board 80-95 with an FPGA. The legacy 49 2000-2063 to identify GPIO lines in a bank of I2C GPIO expanders. 60 - methods to establish GPIO line direction 61 - methods used to access GPIO line values 62 - method to set electrical configuration for a given GPIO line [all …]
|
/Linux-v6.1/drivers/w1/masters/ |
D | w1-gpio.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * w1-gpio - GPIO w1 bus master driver 12 #include <linux/w1-gpio.h> 26 pdata->pullup_duration = delay; in w1_gpio_set_pullup() 28 if (pdata->pullup_duration) { in w1_gpio_set_pullup() 30 * This will OVERRIDE open drain emulation and force-pull in w1_gpio_set_pullup() 33 gpiod_set_raw_value(pdata->gpiod, 1); in w1_gpio_set_pullup() 34 msleep(pdata->pullup_duration); in w1_gpio_set_pullup() 37 * open drain emulation in the GPIO library. in w1_gpio_set_pullup() 39 gpiod_set_value(pdata->gpiod, 1); in w1_gpio_set_pullup() [all …]
|
/Linux-v6.1/include/dt-bindings/gpio/ |
D | gpio.h | 1 /* SPDX-License-Identifier: GPL-2.0 */ 17 /* Bit 1 express single-endedness */ 21 /* Bit 2 express Open drain or open source */ 26 * Open Drain/Collector is the combination of single-ended open drain interface. 27 * Open Source/Emitter is the combination of single-ended open source interface.
|
/Linux-v6.1/Documentation/devicetree/bindings/serio/ |
D | ps2-gpio.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/serio/ps2-gpio.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Danilo Krummrich <danilokrummrich@dk-develop.de> 14 const: ps2-gpio 16 data-gpios: 18 the gpio used for the data signal - this should be flagged as 19 active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN) 20 from <dt-bindings/gpio/gpio.h> since the signal is open drain by [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/pwm/ |
D | nxp,pca9685-pwm.txt | 1 NXP PCA9685 16-channel 12-bit PWM LED controller 5 - compatible: "nxp,pca9685-pwm" 6 - #pwm-cells: Should be 2. See pwm.yaml in this directory for a description of 12 - invert (bool): boolean to enable inverted logic 13 - open-drain (bool): boolean to configure outputs with open-drain structure; 14 if omitted use totem-pole structure 22 compatible = "nxp,pca9685-pwm"; 23 #pwm-cells = <2>; 26 open-drain;
|
/Linux-v6.1/Documentation/devicetree/bindings/pinctrl/ |
D | pinctrl-palmas.txt | 4 the configuration for Pull UP/DOWN, open drain etc. 7 - compatible: It must be one of following: 8 - "ti,palmas-pinctrl" for Palma series of the pincontrol. 9 - "ti,tps65913-pinctrl" for Palma series device TPS65913. 10 - "ti,tps80036-pinctrl" for Palma series device TPS80036. 12 Please refer to pinctrl-bindings.txt in this directory for details of the 19 those pin(s), and various pin configuration parameters, such as pull-up, 20 open drain. 32 - ti,palmas-enable-dvfs1: Enable DVFS1. Configure pins for DVFS1 mode. 35 - ti,palmas-enable-dvfs2: Enable DVFS2. Configure pins for DVFS2 mode. [all …]
|
/Linux-v6.1/drivers/gpio/ |
D | gpio-tps65218.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 7 * This driver is based on the gpio-tps65912 implementation. 26 struct tps65218 *tps65218 = tps65218_gpio->tps65218; in tps65218_gpio_get() 30 ret = regmap_read(tps65218->regmap, TPS65218_REG_ENABLE2, &val); in tps65218_gpio_get() 41 struct tps65218 *tps65218 = tps65218_gpio->tps65218; in tps65218_gpio_set() 64 return -EPERM; in tps65218_gpio_input() 70 struct tps65218 *tps65218 = tps65218_gpio->tps65218; in tps65218_gpio_request() 74 dev_err(gc->parent, "can't work as open source\n"); in tps65218_gpio_request() 75 return -EINVAL; in tps65218_gpio_request() 81 dev_err(gc->parent, "GPO1 works only as open drain\n"); in tps65218_gpio_request() [all …]
|
D | gpio-tc3589x.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) ST-Ericsson SA 2010 5 * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson 6 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson 40 struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; in tc3589x_gpio_get() 55 struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; in tc3589x_gpio_set() 67 struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; in tc3589x_gpio_direction_output() 80 struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; in tc3589x_gpio_direction_input() 91 struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; in tc3589x_gpio_get_direction() 110 struct tc3589x *tc3589x = tc3589x_gpio->tc3589x; in tc3589x_gpio_set_config() [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/regulator/ |
D | fixed-regulator.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Liam Girdwood <lgirdwood@gmail.com> 11 - Mark Brown <broonie@kernel.org> 16 expected to have the regulator-min-microvolt and regulator-max-microvolt 20 - $ref: "regulator.yaml#" 21 - if: 25 const: regulator-fixed-clock [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/w1/ |
D | w1-gpio.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/w1/w1-gpio.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Bitbanged GPIO 1-Wire Bus 10 - Daniel Mack <zonque@gmail.com> 14 const: w1-gpio 19 - description: Data I/O pin 20 - description: Enable pin for an external pull-up resistor 22 linux,open-drain: [all …]
|
/Linux-v6.1/include/linux/platform_data/ |
D | i2c-gpio.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */ 3 * i2c-gpio interface to platform code 11 * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio 15 * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin 19 * @scl_is_open_drain: SCL is set up as open drain. Same requirements
|
/Linux-v6.1/drivers/i2c/busses/ |
D | i2c-gpio.c | 1 // SPDX-License-Identifier: GPL-2.0-only 11 #include <linux/i2c-algo-bit.h> 17 #include <linux/platform_data/i2c-gpio.h> 37 * valid for pins configured as open drain (i.e. setting the value 44 gpiod_set_value_cansleep(priv->sda, state); in i2c_gpio_setsda_val() 49 * for pins that are configured as open drain and for output-only 57 gpiod_set_value_cansleep(priv->scl, state); in i2c_gpio_setscl_val() 64 return gpiod_get_value_cansleep(priv->sda); in i2c_gpio_getsda() 71 return gpiod_get_value_cansleep(priv->scl); in i2c_gpio_getscl() 77 #define setsda(bd, val) ((bd)->setsda((bd)->data, val)) [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/iio/humidity/ |
D | st,hts221.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Lorenzo Bianconi <lorenzo@kernel.org> 23 drive-open-drain: 26 The interrupt/data ready line will be configured as open drain, which 29 vdd-supply: true 35 - compatible 36 - reg 41 - | [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/net/dsa/ |
D | qca8k.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - John Crispin <john@phrozen.org> 13 If the QCA8K switch is connect to an SoC's external mdio-bus, each subnode 16 ID. To declare the internal mdio-bus configuration, declare an MDIO node in 18 PHY it is connected to. In this config, an internal mdio-bus is registered and 20 mdio-bus configurations are not supported by the hardware. 25 - enum: 26 - qca,qca8327 [all …]
|