| /Linux-v5.15/Documentation/devicetree/bindings/regulator/ |
| D | nxp,pca9450-regulator.yaml | 22 #LDO1, LDO2, LDO3, LDO4, LDO5
54 should be "LDO1", ..., "LDO5"
91 description: GPIO that is used to switch LDO5 between being configured by
186 ldo5: LDO5 {
187 regulator-name = "LDO5";
|
| D | slg51000.txt | 14 vin5-supply: Input supply for ldo5
33 ldo5
70 ldo5 {
71 regulator-name = "ldo5";
|
| D | mt6360-regulator.yaml | 23 description: Input supply phandle(s) for LDO5
104 ldo5 {
105 regulator-compatible = "LDO5";
106 regulator-name = "mt6360,ldo5";
|
| D | pv88060.txt | 11 BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
63 LDO5 {
64 regulator-name = "ldo5";
|
| D | max8925-regulator.txt | 12 - LDO5 for LDO LDO5
|
| D | twl-regulator.txt | 27 - "ti,twl6032-ldo5" for LDO5 LDO
|
| D | rohm,bd71837-regulator.yaml | 22 disabled by driver at startup. LDO5 and LDO6 are supplied by those and
23 if they are disabled at startup the voltage monitoring for LDO5/LDO6 will
28 #LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
|
| /Linux-v5.15/drivers/regulator/ |
| D | tps65912-regulator.c | 28 LDO4, LDO5, LDO6, LDO7, LDO8, LDO9, LDO10 }; enumerator
105 TPS65912_REGULATOR("LDO5", LDO5, "ldo5", tps65912_ops_ldo,
|
| D | max8893.c | 105 .name = "LDO5",
106 .supply_name = "in-ldo5",
107 .of_match = of_match_ptr("ldo5"),
|
| D | rn5t618-regulator.c | 54 REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 900000, 3500000, 25000),
70 REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 900000, 3500000, 25000),
88 REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 600000, 3500000, 25000),
|
| D | qcom-rpmh-regulator.c | 788 RPMH_VREG("ldo5", "ldo%s5", &pmic4_nldo, "vdd-l4-l5"),
845 RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
875 RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l4-l5-l6"),
901 RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
935 RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l3-l5"),
959 RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
979 RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
992 RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
1008 RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
1039 RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l4-l5-l6"),
[all …]
|
| D | pcf50633-regulator.c | 65 PCF50633_REGULATOR("ldo5", LDO5, 900000, 100000, 0, 28),
|
| /Linux-v5.15/arch/arm64/boot/dts/freescale/ |
| D | imx8mn-evk.dts | 119 ldo5: LDO5 { label
120 regulator-name = "LDO5";
|
| D | imx8mp-phycore-som.dtsi | 174 ldo5: LDO5 { label
175 regulator-compatible = "LDO5";
|
| /Linux-v5.15/arch/arm/boot/dts/ |
| D | dra72-evm-tps65917.dtsi | 31 ldo5-in-supply = <&vsys_3v3>;
105 ldo5_reg: ldo5 {
107 regulator-name = "ldo5";
|
| D | axp209.dtsi | 109 reg_ldo5: ldo5 {
110 regulator-name = "ldo5";
|
| /Linux-v5.15/Documentation/devicetree/bindings/mfd/ |
| D | da9052-i2c.txt | 27 ldo5 : regulator LDO5
|
| D | wm831x.txt | 47 ldo5 : LDO5
|
| D | da9055.txt | 39 ldo5 : regulator LDO5
|
| D | rohm,bd71828-pmic.yaml | 172 ldo5: LDO5 {
173 regulator-name = "ldo5";
|
| D | rohm,bd71815-pmic.yaml | 179 ldo5: ldo5 {
180 regulator-name = "ldo5";
|
| D | rohm,bd71847-pmic.yaml | 217 ldo5: LDO5 {
218 regulator-name = "ldo5";
|
| D | rohm,bd71837-pmic.yaml | 227 ldo5: LDO5 {
228 regulator-name = "ldo5";
|
| D | tps65910.txt | 25 tps65911: vrtc, vio, vdd1, vdd2, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
47 vcc4-supply: LDO5 input.
174 regulator-compatible = "ldo5";
|
| /Linux-v5.15/arch/mips/boot/dts/ingenic/ |
| D | gcw0.dts | 56 VCC-supply = <&ldo5>;
64 VCC-supply = <&ldo5>;
273 ldo5: LDO5 { label
502 vcc-supply = <&ldo5>;
|
