Searched +full:i2c +full:- +full:controller +full:- +full:id (Results 1 – 25 of 752) sorted by relevance
12345678910>>...31
/Linux-v5.15/drivers/i2c/busses/ |
D | i2c-cadence.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * I2C bus driver for the Cadence I2C controller. 5 * Copyright (C) 2009 - 2014 Xilinx, Inc. 10 #include <linux/i2c.h> 18 /* Register offsets for the I2C device. */ 21 #define CDNS_I2C_ADDR_OFFSET 0x08 /* I2C Address Register, RW */ 22 #define CDNS_I2C_DATA_OFFSET 0x0C /* I2C Data Register, RW */ 57 * I2C Address Register Bit mask definitions 59 * bits. A write access to this register always initiates a transfer if the I2C 62 #define CDNS_I2C_ADDR_MASK 0x000003FF /* I2C Address Mask */ [all …]
|
D | i2c-designware-pcidrv.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * Synopsys DesignWare I2C adapter driver (master only). 5 * Based on the TI DAVINCI I2C adapter driver. 16 #include <linux/i2c.h> 26 #include "i2c-designware-core.h" 28 #define DRIVER_NAME "i2c-designware-pci" 83 /* NAVI-AMD HCNT/LCNT/SDA hold time */ 102 struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); in mfld_setup() 104 switch (pdev->device) { in mfld_setup() 106 dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ; in mfld_setup() [all …]
|
/Linux-v5.15/arch/arm64/boot/dts/mediatek/ |
D | mt6797.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 7 #include <dt-bindings/clock/mt6797-clk.h> 8 #include <dt-bindings/interrupt-controller/irq.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/pinctrl/mt6797-pinfunc.h> 14 interrupt-parent = <&sysirq>; 15 #address-cells = <2>; 16 #size-cells = <2>; 19 compatible = "arm,psci-0.2"; 24 #address-cells = <1>; [all …]
|
/Linux-v5.15/Documentation/devicetree/bindings/i2c/ |
D | nvidia,tegra186-bpmp-i2c.txt | 1 NVIDIA Tegra186 BPMP I2C controller 4 devices, such as the I2C controller for the power management I2C bus. Software 6 transactions on that I2C bus. This binding describes an I2C bus that is 9 The BPMP I2C node must be located directly inside the main BPMP node. See 10 ../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding. 12 This node represents an I2C controller. See ../i2c/i2c.txt for details of the 13 core I2C binding. 16 - compatible: 19 - "nvidia,tegra186-bpmp-i2c". 20 - #address-cells: Address cells for I2C device address. [all …]
|
D | i2c-rk3x.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Rockchip RK3xxx I2C controller 10 This driver interfaces with the native I2C controller present in Rockchip 14 - $ref: /schemas/i2c/i2c-controller.yaml# 17 - Heiko Stuebner <heiko@sntech.de> 23 - const: rockchip,rv1108-i2c 24 - const: rockchip,rk3066-i2c [all …]
|
D | st,stm32-i2c.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/i2c/st,stm32-i2c.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: I2C controller embedded in STMicroelectronics STM32 I2C platform 10 - Pierre-Yves MORDRET <pierre-yves.mordret@st.com> 13 - $ref: /schemas/i2c/i2c-controller.yaml# 14 - if: 19 - st,stm32f7-i2c 20 - st,stm32mp15-i2c [all …]
|
D | i2c-pxa.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only 3 --- 4 $id: http://devicetree.org/schemas/i2c/i2c-pxa.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Marvell MMP I2C controller bindings 10 - Rob Herring <robh+dt@kernel.org> 13 - $ref: /schemas/i2c/i2c-controller.yaml# 14 - if: 17 - mrvl,i2c-polling 20 - interrupts [all …]
|
D | cdns,i2c-r1p10.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#" 5 $schema: "http://devicetree.org/meta-schemas/core.yaml#" 7 title: Cadence I2C controller Device Tree Bindings 10 - Michal Simek <michal.simek@xilinx.com> 13 - $ref: /schemas/i2c/i2c-controller.yaml# 18 - cdns,i2c-r1p10 # cadence i2c controller version 1.0 19 - cdns,i2c-r1p14 # cadence i2c controller version 1.4 30 clock-frequency: [all …]
|
D | i2c-owl.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/i2c/i2c-owl.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Actions Semi Owl I2C Controller 10 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> 13 This I2C controller is found in the Actions Semi Owl SoCs: 17 - $ref: /schemas/i2c/i2c-controller.yaml# 22 - actions,s500-i2c # Actions Semi S500 compatible SoCs 23 - actions,s700-i2c # Actions Semi S700 compatible SoCs [all …]
|
D | brcm,iproc-i2c.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 4 $id: http://devicetree.org/schemas/i2c/brcm,iproc-i2c.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Broadcom iProc I2C controller 10 - Rafał Miłecki <rafal@milecki.pl> 15 - brcm,iproc-i2c 16 - brcm,iproc-nic-i2c 21 clock-frequency: 26 Should contain the I2C interrupt. For certain revisions of the I2C [all …]
|
D | i2c-pxa-pci-ce4100.txt | 1 CE4100 I2C 2 ---------- 4 CE4100 has one PCI device which is described as the I2C-Controller. This 5 PCI device has three PCI-bars, each bar contains a complete I2C 6 controller. So we have a total of three independent I2C-Controllers 8 The driver is probed via the PCI-ID and is gathering the information of 10 Grant Likely recommended to use the ranges property to map the PCI-Bar 12 of the specific I2C controller. This were his exact words: 22 non-zero if you had 2 or more devices mapped off 30 ------------------------------------------------ [all …]
|
D | nuvoton,npcm7xx-i2c.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 4 $id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: nuvoton NPCM7XX I2C Controller Device Tree Bindings 10 The NPCM750x includes sixteen I2C bus controllers. All Controllers support 11 both master and slave mode. Each controller can switch between master and slave 12 at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and 16 - Tali Perry <tali.perry1@gmail.com> 20 const: nuvoton,npcm750-i2c [all …]
|
D | snps,designware-i2c.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only 3 --- 4 $id: http://devicetree.org/schemas/i2c/snps,designware-i2c.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Synopsys DesignWare APB I2C Controller 10 - Jarkko Nikula <jarkko.nikula@linux.intel.com> 13 - $ref: /schemas/i2c/i2c-controller.yaml# 14 - if: 19 const: mscc,ocelot-i2c 28 - description: Generic Synopsys DesignWare I2C controller [all …]
|
D | ingenic,i2c.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Ingenic SoCs I2C controller devicetree bindings 10 - Paul Cercueil <paul@crapouillou.net> 13 - $ref: /schemas/i2c/i2c-controller.yaml# 17 pattern: "^i2c@[0-9a-f]+$" 21 - enum: 22 - ingenic,jz4770-i2c [all …]
|
D | i2c-imx.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/i2c/i2c-imx.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX 10 - Oleksij Rempel <o.rempel@pengutronix.de> 13 - $ref: /schemas/i2c/i2c-controller.yaml# 18 - const: fsl,imx1-i2c 19 - const: fsl,imx21-i2c 20 - const: fsl,vf610-i2c [all …]
|
D | i2c-mux-pca954x.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: NXP PCA954x I2C bus switch 10 - Laurent Pinchart <laurent.pinchart@ideasonboard.com> 13 The binding supports NXP PCA954x and PCA984x I2C mux/switch devices. 16 - $ref: /schemas/i2c/i2c-mux.yaml# 21 - enum: 22 - nxp,pca9540 [all …]
|
D | i2c-mux.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/i2c/i2c-mux.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Common i2c bus multiplexer/switch properties. 10 - Peter Rosin <peda@axentia.se> 13 An i2c bus multiplexer/switch will have several child busses that are numbered 14 uniquely in a device dependent manner. The nodes for an i2c bus 17 For i2c multiplexers/switches that have child nodes that are a mixture of both 18 i2c child busses and other child nodes, the 'i2c-mux' subnode can be used for [all …]
|
D | i2c-mux-gpmux.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/i2c/i2c-mux-gpmux.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: General Purpose I2C Bus Mux 10 - Peter Rosin <peda@axentia.se> 13 This binding describes an I2C bus multiplexer that uses a mux controller 14 from the mux subsystem to route the I2C signals. 16 .-----. .-----. 18 .------------. '-----' '-----' [all …]
|
/Linux-v5.15/Documentation/devicetree/bindings/fsi/ |
D | fsi.txt | 4 The FSI bus is probe-able, so the OS is able to enumerate FSI slaves, and 6 nodes to probed engines. This allows for fsi engines to expose non-probeable 8 that is an I2C master - the I2C bus can be described by the device tree under 13 the fsi-master-* binding specifications. 18 fsi-master { 19 /* top-level of FSI bus topology, bound to an FSI master driver and 22 fsi-slave@<link,id> { 26 fsi-slave-engine@<addr> { 32 fsi-slave-engine@<addr> { 39 Note that since the bus is probe-able, some (or all) of the topology may [all …]
|
/Linux-v5.15/include/linux/i3c/ |
D | master.h | 1 /* SPDX-License-Identifier: GPL-2.0 */ 14 #include <linux/i2c.h> 31 * struct i3c_i2c_dev_desc - Common part of the I3C/I2C device descriptor 32 * @node: node element used to insert the slot into the I2C or I3C device 35 * I2C/I3C transfers 39 * This structure is describing common I3C/I2C dev information. 54 * struct i2c_dev_boardinfo - I2C device board information 55 * @node: used to insert the boardinfo object in the I2C boardinfo list 56 * @base: regular I2C board information 58 * the I2C device limitations [all …]
|
/Linux-v5.15/Documentation/i2c/busses/ |
D | i2c-i801.rst | 2 Kernel driver i2c-i801 7 * Intel 82801AA and 82801AB (ICH and ICH0 - part of the 9 * Intel 82801BA (ICH2 - part of the '815E' chipset) 51 On Intel Patsburg and later chipsets, both the normal host SMBus controller 55 - Mark Studebaker <mdsxyz123@yahoo.com> 56 - Jean Delvare <jdelvare@suse.de> 60 ----------------- 71 0x08 disable the I2C block read functionality 78 ----------- 82 Intel's '810' chipset for Celeron-based PCs, '810E' chipset for [all …]
|
/Linux-v5.15/arch/arm64/boot/dts/ti/ |
D | k3-j7200-main.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ 9 serdes_refclk: serdes-refclk { 10 #clock-cells = <0>; 11 compatible = "fixed-clock"; 17 compatible = "mmio-sram"; 19 #address-cells = <1>; 20 #size-cells = <1>; 23 atf-sram@0 { 28 scm_conf: scm-conf@100000 { [all …]
|
D | k3-j721e-mcu-wakeup.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ 9 dmsc: system-controller@44083000 { 10 compatible = "ti,k2g-sci"; 11 ti,host-id = <12>; 13 mbox-names = "rx", "tx"; 18 reg-names = "debug_messages"; 21 k3_pds: power-controller { 22 compatible = "ti,sci-pm-domain"; 23 #power-domain-cells = <2>; [all …]
|
D | k3-j7200-mcu-wakeup.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ 9 dmsc: system-controller@44083000 { 10 compatible = "ti,k2g-sci"; 11 ti,host-id = <12>; 13 mbox-names = "rx", "tx"; 18 reg-names = "debug_messages"; 21 k3_pds: power-controller { 22 compatible = "ti,sci-pm-domain"; 23 #power-domain-cells = <2>; [all …]
|
D | k3-am65-wakeup.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ 9 dmsc: system-controller@44083000 { 10 compatible = "ti,am654-sci"; 11 ti,host-id = <12>; 13 mbox-names = "rx", "tx"; 18 reg-names = "debug_messages"; 21 k3_pds: power-controller { 22 compatible = "ti,sci-pm-domain"; 23 #power-domain-cells = <2>; [all …]
|
12345678910>>...31