| /Linux-v5.4/Documentation/ABI/obsolete/ |
| D | sysfs-driver-hid-roccat-ryos | 5 profile will be read next. The data has to be 3 bytes long.
17 The data has to be 3 bytes long.
26 The data has to be 125 bytes long.
27 Before reading this file, control has to be written to select
36 in written data. The data has to be 95 bytes long.
37 Before reading this file, control has to be written to select
46 written data. The data has to be 35 bytes long.
47 Before reading this file, control has to be written to select
56 in written data. The data has to be 23 bytes long.
57 Before reading this file, control has to be written to select
[all …]
|
| D | sysfs-driver-hid-roccat-isku | 26 written data. The data has to be 6 bytes long.
27 Before reading this file, control has to be written to select
36 in written data. The data has to be 6 bytes long.
37 Before reading this file, control has to be written to select
46 in written data. The data has to be 65 bytes long.
47 Before reading this file, control has to be written to select
56 in written data. The data has to be 41 bytes long.
57 Before reading this file, control has to be written to select
66 written data. The data has to be 35 bytes long.
67 Before reading this file, control has to be written to select
[all …]
|
| D | sysfs-driver-hid-roccat-konepure | 9 The data has to be 3 bytes long.
17 profile will be read next. The data has to be 3 bytes long.
36 included in written data. The data has to be 2082 bytes long.
47 buttons back to the mouse. The data has to be 59 bytes long.
51 Before reading this file, control has to be written to select
63 settings back to the mouse. The data has to be 31 bytes long.
67 Before reading this file, control has to be written to select
74 Description: The mouse has a tracking- and a distance-control-unit. These
76 set. The data has to be 6 bytes long.
84 The data has to be 16 bytes long.
[all …]
|
| D | sysfs-driver-hid-roccat-savu | 8 respective profile buttons to the mouse. The data has to be
13 Before reading this file, control has to be written to select
21 profile will be read next. The data has to be 3 bytes long.
33 settings back to the mouse. The data has to be 43 bytes long.
54 The data has to be 2083 bytes long.
55 Before reading this file, control has to be written to select
67 The data has to be 3 bytes long.
74 Description: The mouse has a Avago ADNS-3090 sensor.
76 The data has to be 4 bytes long.
|
| /Linux-v5.4/include/linux/mfd/ |
| D | db8500-prcmu.h | 83 * @RDY_2_XP70_RST: Value set when 0x0F has been successfully polled by the
179 * @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been
181 * @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been
183 * @SLEEPOK: The apExecute to apSleep state transition has been completed
184 * @IDLEOK: The apExecute to apIdle state transition has been completed
185 * @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed
192 * @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has
196 * @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been
200 * @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been
258 * @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP
[all …]
|
| /Linux-v5.4/drivers/hv/ |
| D | hv_balloon.c | 194 * if the host has accepted the version sent by the guest.
196 * is_accepted: If TRUE, host has accepted the version and the guest
223 * guest. This message notifies if the host has accepted the guest's
224 * capabilities. If the host has not accepted, the guest must shutdown
227 * is_accepted: Indicates if the host has accepted guest's capabilities.
358 * the guest has hit an upper physical memory barrier.
421 * that the host has asked us to hot add. The range
525 * This state tracks if the host has specified a hot-add
572 static inline bool has_pfn_is_backed(struct hv_hotadd_state *has, in has_pfn_is_backed() argument
578 if ((pfn < has->covered_start_pfn) || (pfn >= has->covered_end_pfn)) in has_pfn_is_backed()
[all …]
|
| /Linux-v5.4/drivers/greybus/ |
| D | greybus_trace.h | 60 * Occurs after an incoming request message has been received
65 * Occurs after an incoming response message has been received,
66 * after its matching request has been found.
71 * Occurs after an operation has been canceled, possibly before the
77 * Occurs when an incoming request is cancelled; if the response has
128 * has been successfully created.
133 * Occurs after a new core operation has been created.
138 * Occurs after a new operation has been created for an incoming
139 * request has been successfully created and initialized.
144 * Occurs when the last reference to an operation has been dropped,
[all …]
|
| /Linux-v5.4/include/uapi/linux/netfilter/ |
| D | nf_conntrack_common.h | 55 /* Connection is confirmed: originating packet has left box */
88 /* Connection has fixed timeout. */
104 /* Conntrack has been offloaded to flow table. */
123 IPCT_REPLY, /* connection has seen two-way traffic */
124 IPCT_ASSURED, /* connection status has changed to assured */
125 IPCT_PROTOINFO, /* protocol information has changed */
126 IPCT_HELPER, /* new helper has been set */
127 IPCT_MARK, /* new mark has been set */
128 IPCT_SEQADJ, /* sequence adjustment has changed */
130 IPCT_SECMARK, /* new security mark has been set */
[all …]
|
| /Linux-v5.4/lib/ |
| D | errseq.c | 9 * number of "subscribers" to tell whether it has changed since a previous
24 * To mitigate this, one bit is used as a flag to tell whether the value has
26 * the counter if no one has sampled it since the last time an error was
30 * is the special (but common) case where there has never been an error. An all
32 * has ever been an error set since it was first initialized.
38 /* This bit is used as a flag to indicate whether the value has been seen */
83 /* Only increment if someone has looked at it */ in errseq_set()
115 * If the error has been "seen", new callers will not see an old error.
126 /* If nobody has seen this error yet, then we can be the first. */ in errseq_sample()
134 * errseq_check() - Has an error occurred since a particular sample point?
[all …]
|
| /Linux-v5.4/Documentation/devicetree/bindings/crypto/ |
| D | fsl-sec2.txt | 21 bit 1 = set if SEC has the ARC4 EU (AFEU)
22 bit 2 = set if SEC has the DES/3DES EU (DEU)
23 bit 3 = set if SEC has the message digest EU (MDEU/MDEU-A)
24 bit 4 = set if SEC has the random number generator EU (RNG)
25 bit 5 = set if SEC has the public key EU (PKEU)
26 bit 6 = set if SEC has the AES EU (AESU)
27 bit 7 = set if SEC has the Kasumi EU (KEU)
28 bit 8 = set if SEC has the CRC EU (CRCU)
29 bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B)
|
| /Linux-v5.4/Documentation/ABI/testing/ |
| D | sysfs-class-led-flash | 27 is stopped after this period of time has passed from the start
59 has exceeded the limit specific to the flash controller
61 the timeout set by the user has expired; not all flash
63 * controller-over-temperature - the flash controller has
66 of the flash controller has been triggered
68 supply has exceeded the limit specific to the flash
70 * indicator-led-fault - the flash controller has detected
73 LED has been below the minimum limit specific to
79 * led-over-temperature - the temperature of the LED has exceeded
|
| /Linux-v5.4/Documentation/networking/ |
| D | 6pack.txt | 15 6pack has two major advantages:
19 buffer underrun or overrun has occurred, if the PTT is
33 Damaged packets that the TNC has received from the PC are not transmitted.
38 2. Who has developed the 6pack protocol?
40 The 6pack protocol has been developed by Ekki Plicht DF4OR, Henning Rech
79 The driver has been tested with kernel version 2.1.90. Use with older
81 function has been changed in the 2.1.8x kernels.
94 has to be modified.
114 module has printed its initialization message.
124 Although the driver has been tested on various platforms, I still declare it
[all …]
|
| /Linux-v5.4/drivers/staging/axis-fifo/ |
| D | axis-fifo.txt | 3 This IP core has read and write AXI-Stream FIFOs, the contents of which can
32 - xlnx,has-axis-tdest: Should be <0x0> (this feature isn't supported)
33 - xlnx,has-axis-tid: Should be <0x0> (this feature isn't supported)
34 - xlnx,has-axis-tkeep: Should be <0x0> (this feature isn't supported)
35 - xlnx,has-axis-tstrb: Should be <0x0> (this feature isn't supported)
36 - xlnx,has-axis-tuser: Should be <0x0> (this feature isn't supported)
70 xlnx,has-axis-tdest = <0x0>;
71 xlnx,has-axis-tid = <0x0>;
72 xlnx,has-axis-tkeep = <0x0>;
73 xlnx,has-axis-tstrb = <0x0>;
[all …]
|
| /Linux-v5.4/drivers/i2c/algos/ |
| D | i2c-algo-pca.c | 52 * returns after the start condition has occurred
67 * return after the repeated start condition has occurred
82 * returns after the stop condition has been generated
100 * returns after the address has been sent
122 * Returns after the byte has been transmitted
152 * Returns after next byte has arrived.
227 case 0x08: /* A START condition has been transmitted */ in pca_xfer()
228 case 0x10: /* A repeated start condition has been transmitted */ in pca_xfer()
232 case 0x18: /* SLA+W has been transmitted; ACK has been received */ in pca_xfer()
233 case 0x28: /* Data byte in I2CDAT has been transmitted; ACK has been received */ in pca_xfer()
[all …]
|
| /Linux-v5.4/Documentation/devicetree/bindings/nios2/ |
| D | nios2.txt | 26 - altr,has-mul: Specifies CPU hardware multipy support, should be 1.
27 - altr,has-mmu: Specifies CPU support MMU support, should be 1.
28 - altr,has-initda: Specifies CPU support initda instruction, should be 1.
34 - altr,has-div: Specifies CPU hardware divide support
55 altr,has-div = <1>;
56 altr,has-mul = <1>;
60 altr,has-initda = <1>;
61 altr,has-mmu = <1>;
|
| /Linux-v5.4/arch/mips/include/asm/ |
| D | cpu.h | 355 #define MIPS_CPU_TLB BIT_ULL( 0) /* CPU has TLB */
360 #define MIPS_CPU_FPU BIT_ULL( 5) /* CPU has FPU */
371 #define MIPS_CPU_LLSC BIT_ULL(16) /* CPU has ll/sc instructions */
373 #define MIPS_CPU_PREFETCH BIT_ULL(18) /* CPU has usable prefetch */
376 #define MIPS_CPU_ULRI BIT_ULL(21) /* CPU has ULRI feature */
377 #define MIPS_CPU_PCI BIT_ULL(22) /* CPU has Perf Ctr Int indicator */
378 #define MIPS_CPU_RIXI BIT_ULL(23) /* CPU has TLB Read/eXec Inhibit */
379 #define MIPS_CPU_MICROMIPS BIT_ULL(24) /* CPU has microMIPS capability */
384 #define MIPS_CPU_RIXIEX BIT_ULL(29) /* CPU has unique exception codes for {Read, Execute}-Inhibit …
389 #define MIPS_CPU_CDMM BIT_ULL(34) /* CPU has Common Device Memory Map */
[all …]
|
| /Linux-v5.4/mm/ |
| D | cleancache.c | 58 * a cleancache enabled filesystem has called cleancache_init_fs. To in cleancache_register_ops()
68 * cleancache enabled filesystems that has been mounted by the time in cleancache_register_ops()
69 * cleancache_register_ops is called has got and all mounted later will in cleancache_register_ops()
73 * a) iterate_supers skips only those super blocks that has started in cleancache_register_ops()
76 * b) if iterate_supers encounters a super block that has not finished in cleancache_register_ops()
82 * d) we call iterate_supers after cleancache_ops has been set in cleancache_register_ops()
93 * block that has already started ->init_fs, it will wait until ->mount in cleancache_register_ops()
94 * and hence ->init_fs has finished, then check cleancache_poolid, see in cleancache_register_ops()
95 * that it has already been set and therefore do nothing. This proves in cleancache_register_ops()
104 * until the corresponding ->init_fs has been actually called and in cleancache_register_ops()
[all …]
|
| /Linux-v5.4/scripts/ |
| D | extract_xc3028.pl | 590 # Firmware 48, type: SCODE FW HAS IF (0x60000000), IF = 3.28 MHz id: (0000000000000000), size: 192
600 # Firmware 49, type: SCODE FW HAS IF (0x60000000), IF = 3.30 MHz id: (0000000000000000), size: 192
610 # Firmware 50, type: SCODE FW HAS IF (0x60000000), IF = 3.44 MHz id: (0000000000000000), size: 192
620 # Firmware 51, type: SCODE FW HAS IF (0x60000000), IF = 3.46 MHz id: (0000000000000000), size: 192
630 …# Firmware 52, type: SCODE FW DTV6 ATSC OREN36 HAS IF (0x60210020), IF = 3.80 MHz id: (0000000000…
640 # Firmware 53, type: SCODE FW HAS IF (0x60000000), IF = 4.00 MHz id: (0000000000000000), size: 192
650 …# Firmware 54, type: SCODE FW DTV6 ATSC TOYOTA388 HAS IF (0x60410020), IF = 4.08 MHz id: (0000000…
660 # Firmware 55, type: SCODE FW HAS IF (0x60000000), IF = 4.20 MHz id: (0000000000000000), size: 192
670 …# Firmware 56, type: SCODE FW MONO HAS IF (0x60008000), IF = 4.32 MHz id: NTSC/M Kr (000000000000…
680 # Firmware 57, type: SCODE FW HAS IF (0x60000000), IF = 4.45 MHz id: (0000000000000000), size: 192
[all …]
|
| /Linux-v5.4/Documentation/driver-api/memory-devices/ |
| D | ti-gpmc.rst | 23 GPMC has certain timings that has to be programmed for proper
24 functioning of the peripheral, while peripheral has another set of
25 timings. To have peripheral work with gpmc, peripheral timings has to
26 be translated to the form gpmc can understand. The way it has to be
32 from gpmc peripheral timings. struct gpmc_device_timings fields has to
35 in time or in cycles, provision to handle this scenario has been
45 Generic timing routine has been verified to work properly on
48 A word of caution: generic timing routine has been developed based
|
| /Linux-v5.4/Documentation/devicetree/bindings/i2c/ |
| D | nvidia,tegra20-i2c.txt | 10 nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
15 nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
19 nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
26 nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
29 - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
30 fast-clk. Tegra114 has only one clock source called as div-clk and
32 - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
33 default and there is no way to disable it. Tegra114 has this
|
| /Linux-v5.4/drivers/bus/ |
| D | omap_l3_smx.h | 125 /* LCD has 1 ID */
127 /* SAD2D has 1 ID */
129 /* MPU has 5 IDs */
135 /* IVA2.2 SS has 3 IDs*/
139 /* IVA 2.2 SS DMA has 6 IDS */
146 /* SGX has 1 ID */
148 /* CAM has 3 ID */
152 /* DAP has 1 ID */
154 /* SDMA WR has 2 IDs */
157 /* SDMA RD has 4 IDs */
[all …]
|
| /Linux-v5.4/Documentation/scsi/ |
| D | FlashPoint.txt | 2 The upgrade program described below has been officially terminated effective
11 FREMONT, CA, -- October 8, 1996 -- Mylex Corporation has expanded Linux
72 Ever since its introduction last October, the BusLogic FlashPoint LT has
77 system like Linux, the FlashPoint LT has been touted by computer system
78 vendors as the latest thing, and has been sold even on many of their high
79 end systems, to the exclusion of the older MultiMaster products. This has
113 FlashPoint architecture at all, that debate has not yet been settled either
121 has put in place a direct upgrade program to allow any Linux user worldwide
124 and has all the best features of both the BT-946C and FlashPoint LT,
127 upgrade has been set at US $45 plus shipping and handling, and the upgrade
[all …]
|
| /Linux-v5.4/Documentation/devicetree/bindings/phy/ |
| D | brcm,brcmstb-usb-phy.txt | 23 - brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
24 - brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
39 brcm,has-xhci;
40 brcm,has-eohci;
|
| /Linux-v5.4/include/linux/greybus/ |
| D | greybus_protocols.h | 108 /* Control protocol manifest get size request has no payload*/
113 /* Control protocol manifest get request has no payload */
126 /* disconnecting response has no payload */
131 /* Control protocol [dis]connected response has no payload */
243 /* firmware download release firmware response has no payload */
278 /* firmware management interface firmware version request has no payload */
291 /* firmware management load and validate firmware response has no payload*/
300 /* firmware management loaded firmware response has no payload */
318 /* firmware management backend firmware update response has no payload */
325 /* firmware management backend firmware updated response has no payload */
[all …]
|
| /Linux-v5.4/Documentation/ABI/stable/ |
| D | sysfs-transport-srp | 13 layer error has been observed before removing a target port.
22 layer error has been observed before failing I/O. Zero means
53 "blocked" if a transport layer error has been encountered but
54 the fast_io_fail_tmo timer has not yet fired; "fail-fast"
55 after the fast_io_fail_tmo timer has fired and before the
56 "dev_loss_tmo" timer has fired; "lost" after the
57 "dev_loss_tmo" timer has fired and before the port is finally
|
