/Linux-v6.1/Documentation/devicetree/bindings/input/touchscreen/ |
D | ad7879.txt | 1 * Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C) 4 - compatible : for SPI slave, use "adi,ad7879" 5 for I2C slave, use "adi,ad7879-1" 6 - reg : SPI chipselect/I2C slave address 7 See spi-bus.txt for more SPI slave properties 8 - interrupts : touch controller interrupt 9 - touchscreen-max-pressure : maximum reported pressure 10 - adi,resistance-plate-x : total resistance of X-plate (for pressure 13 - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) 14 - adi,first-conversion-delay : 0-12: In 128us steps (starting with 128us) [all …]
|
/Linux-v6.1/Documentation/hwmon/ |
D | mc13783-adc.rst | 1 Kernel driver mc13783-adc 10 Datasheet: https://www.nxp.com/docs/en/data-sheet/MC13783.pdf 16 Datasheet: https://www.nxp.com/docs/en/data-sheet/MC13892.pdf 22 - Sascha Hauer <s.hauer@pengutronix.de> 23 - Luotao Fu <l.fu@pengutronix.de> 26 ----------- 29 Among other things they contain a 10-bit A/D converter. The converter has 16 31 A/D converter has a resolution of 2.25mV. 37 the General Purpose inputs and touchscreen. 42 - MC13783: [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/input/ |
D | elan,ekth3000.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Dmitry Torokhov <dmitry.torokhov@gmail.com> 13 - $ref: touchscreen/touchscreen.yaml# 25 wakeup-source: 29 vcc-supply: 40 elan,middle-button: 42 description: touchpad has a physical middle button 52 touchscreen-size-x: true [all …]
|
D | goodix,gt7375p.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Goodix GT7375P touchscreen 10 - Douglas Anderson <dianders@chromium.org> 13 Supports the Goodix GT7375P touchscreen. 14 This touchscreen uses the i2c-hid protocol but has some non-standard 20 - const: goodix,gt7375p 21 - items: 22 - const: goodix,gt7986u [all …]
|
D | hid-over-i2c.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only 3 --- 4 $id: http://devicetree.org/schemas/input/hid-over-i2c.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Benjamin Tissoires <benjamin.tissoires@redhat.com> 11 - Jiri Kosina <jkosina@suse.cz> 18 The specification has been written by Microsoft and is currently available here: 19 https://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx 21 If this binding is used, the kernel module i2c-hid will handle the communication 25 - $ref: /schemas/input/touchscreen/touchscreen.yaml# [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/iio/adc/ |
D | samsung,exynos-adc.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/samsung,exynos-adc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Krzysztof Kozlowski <krzk@kernel.org> 15 - samsung,exynos-adc-v1 # Exynos5250 16 - samsung,exynos-adc-v2 17 - samsung,exynos3250-adc 18 - samsung,exynos4212-adc # Exynos4212 and Exynos4412 19 - samsung,exynos7-adc [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/regulator/ |
D | raspberrypi,7inch-touchscreen-panel-regulator.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: RaspberryPi 7" display ATTINY88-based regulator/backlight controller 10 - Marek Vasut <marex@denx.de> 13 The RaspberryPi 7" display has an ATTINY88-based regulator/backlight 18 - $ref: "regulator.yaml#" 22 const: raspberrypi,7inch-touchscreen-panel-regulator 30 - compatible [all …]
|
/Linux-v6.1/drivers/input/touchscreen/ |
D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only 3 # Touchscreen driver configuration 16 tristate "Marvell 88PM860x touchscreen" 20 support for the built-in touchscreen. 25 module will be called 88pm860x-ts. 32 Say Y here if you have a touchscreen interface using the 34 and your board-specific setup code includes that in its 50 Say Y here if you have a touchscreen interface using the 51 AD7877 controller, and your board-specific initialization 60 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface" [all …]
|
D | s3c2410_ts.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * Samsung S3C24XX touchscreen driver 5 * Copyright 2004 Arnaud Patard <arnaud.patard@rtp-net.org> 6 * Copyright 2008 Ben Dooks <ben-linux@fluff.org> 23 #include <linux/soc/samsung/s3c-adc.h> 24 #include <linux/platform_data/touchscreen-s3c2410.h> 76 #define FEAT_PEN_IRQ (1 << 0) /* HAS ADCCLRINTPNDNUP */ 78 /* Per-touchscreen data. */ 81 * struct s3c2410ts - driver touchscreen state. 111 * get_down - return the down state of the pen [all …]
|
D | wm97xx-core.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * wm97xx-core.c -- Touch screen driver core for Wolfson WM9705, WM9712 15 * - supports WM9705, WM9712, WM9713 16 * - polling mode 17 * - continuous mode (arch-dependent) 18 * - adjustable rpu/dpp settings 19 * - adjustable pressure current 20 * - adjustable sample settle delay 21 * - 4 and 5 wire touchscreens (5 wire is WM9712 only) 22 * - pen down detection [all …]
|
D | raspberrypi-ts.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * Raspberry Pi firmware based touchscreen driver 15 #include <linux/dma-mapping.h> 19 #include <linux/input/touchscreen.h> 20 #include <soc/bcm2835/raspberrypi-firmware.h> 70 memcpy_fromio(®s, ts->fw_regs_va, sizeof(regs)); in rpi_ts_poll() 72 * We poll the memory based register copy of the touchscreen chip using in rpi_ts_poll() 73 * the number of points register to know whether the copy has been in rpi_ts_poll() 75 * 0 - 10 points) in rpi_ts_poll() 78 ts->fw_regs_va + offsetof(struct rpi_ts_regs, num_points)); in rpi_ts_poll() [all …]
|
D | ads7846.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * ADS7846 based touchscreen and sensor driver 10 * - corgi_ts.c 11 * Copyright (C) 2004-2005 Richard Purdie 12 * - omap_ts.[hc], ads7846.h, ts_osk.c 23 #include <linux/input/touchscreen.h> 38 * This code has been heavily tested on a Nokia 770, and lightly 41 * Support for ads7843 tested on Atmel at91sam926x-EK. 42 * Support for ads7845 has only been stubbed in. 55 * note. The strength of filtering can be set in the board-* specific [all …]
|
D | mcs5000_ts.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller 8 * Based on wm97xx-core.c 85 /* Touchscreen absolute values */ 98 /* Each client has this additional data */ 108 struct i2c_client *client = data->client; in mcs5000_ts_interrupt() 117 dev_err(&client->dev, "%s, err[%d]\n", __func__, err); in mcs5000_ts_interrupt() 123 input_report_key(data->input_dev, BTN_TOUCH, 0); in mcs5000_ts_interrupt() 124 input_sync(data->input_dev); in mcs5000_ts_interrupt() 131 input_report_key(data->input_dev, BTN_TOUCH, 1); in mcs5000_ts_interrupt() [all …]
|
/Linux-v6.1/arch/arm64/boot/dts/mediatek/ |
D | mt8183-kukui-kodama.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 /dts-v1/; 7 #include "mt8183-kukui.dtsi" 8 #include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" 11 ppvarn_lcd: ppvarn-lcd { 12 compatible = "regulator-fixed"; 13 regulator-name = "ppvarn_lcd"; 14 pinctrl-names = "default"; 15 pinctrl-0 = <&ppvarn_lcd_en>; 17 enable-active-high; [all …]
|
/Linux-v6.1/arch/arm/boot/dts/ |
D | imx6dl-lanmcu.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 7 /dts-v1/; 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/leds/common.h> 17 stdout-path = &uart4; 20 clock_ksz8081: clock-ksz8081 { 21 compatible = "fixed-clock"; 22 #clock-cells = <0>; 23 clock-frequency = <50000000>; 27 compatible = "pwm-backlight"; [all …]
|
D | imx7-colibri-iris.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 16 interrupt-parent = <&gpio1>; 18 pinctrl-0 = <&pinctrl_atmel_adapter>; 19 reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */ 35 * transceiver off, that property has to be deleted and the gpio handled in userspace. 38 uart25-tx-on-hog { 39 gpio-hog; 41 output-high; 46 uart1-tx-on-hog { 47 gpio-hog; [all …]
|
D | ste-ux500-samsung-codina.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Devicetree for the Samsung Galaxy Ace 2 GT-I8160 also known as Codina. 11 * The Samsung tree further talks about GT-I8160P and GT-I8160chn (China). 12 * The GT-I8160 plain is known as the "europe" variant. 13 * The GT-I8160P is the CDMA version and it appears to not use the ST 14 * Microelectronics accelerometer and reportedly has NFC mounted. 15 * The GT-I8160chn appears to be the same as the europe variant. 17 * There is also the Codina-TMO, Samsung SGH-T599, which has its own device 21 /dts-v1/; 22 #include "ste-db8500.dtsi" [all …]
|
D | ste-ux500-samsung-codina-tmo.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Devicetree for the Samsung Galaxy Exhibit SGH-T599 also known as Codina-TMO, 4 * the "TMO" shall be read "T-Mobile" as this phone was produced exlusively 5 * for T-Mobile in the United States. 7 * This phone is closely related to the Codina, but has: 8 * - No CPU speed cap, full ~1GHz rate 9 * - Different power management IC, AB8505 10 * - As AB8505 has a micro USB phy, no TI TSU6111 11 * - Different power routing such as the removal of the external LDO for the 12 * touchscreen in favor of using the AB8505 [all …]
|
D | sun8i-reference-design-tablet.dtsi | 4 * This file is dual-licensed: you can use it either under the terms 42 #include "sunxi-reference-design-tablet.dtsi" 44 #include <dt-bindings/pwm/pwm.h> 52 compatible = "pwm-backlight"; 54 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; 55 default-brightness-level = <8>; 56 enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ 57 power-supply = <®_dc1sw>; 61 stdout-path = "serial0:115200n8"; 68 * 100KHz, this has been confirmed on multiple different q8 tablets. [all …]
|
/Linux-v6.1/arch/arm/mach-omap1/ |
D | fpga.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * linux/arch/arm/mach-omap1/fpga.c 5 * Interrupt handler for OMAP-1510 Innovator FPGA 34 unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE; in fpga_mask_irq() 41 & ~(1 << (irq - 8))), OMAP1510_FPGA_IMR_HI); in fpga_mask_irq() 44 & ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2); in fpga_mask_irq() 67 unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE; in fpga_unmask_irq() 74 | (1 << (irq - 8))), OMAP1510_FPGA_IMR_HI); in fpga_unmask_irq() 77 | (1 << (irq - 16))), INNOVATOR_FPGA_IMR2); in fpga_unmask_irq() 106 .name = "FPGA-ack", [all …]
|
/Linux-v6.1/arch/arm64/boot/dts/rockchip/ |
D | rk3399-gru-bob.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * Google Gru-Bob Rev 4+ board device tree source 8 /dts-v1/; 9 #include "rk3399-gru-chromebook.dtsi" 13 compatible = "google,bob-rev13", "google,bob-rev12", 14 "google,bob-rev11", "google,bob-rev10", 15 "google,bob-rev9", "google,bob-rev8", 16 "google,bob-rev7", "google,bob-rev6", 17 "google,bob-rev5", "google,bob-rev4", 19 chassis-type = "convertible"; [all …]
|
/Linux-v6.1/sound/soc/intel/boards/ |
D | bytcht_es8316.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * bytcht_es8316.c - ASoc Machine driver for Intel Baytrail/Cherrytrail 7 * Authors: David Yang <yangxiaohua@everest-semi.com>, 29 #include <sound/soc-acpi.h> 30 #include "../atom/sst-atom-controls.h" 31 #include "../common/soc-intel-quirks.h" 33 /* jd-inv + terminating entry */ 56 static int quirk_override = -1; 58 MODULE_PARM_DESC(quirk, "Board-specific quirk override"); 77 struct snd_soc_card *card = w->dapm->card; in byt_cht_es8316_speaker_power_event() [all …]
|
/Linux-v6.1/arch/arm/mach-sa1100/ |
D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only 32 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 40 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 41 Microprocessor Development Board (Assabet) with the SA-1111 127 keyboard, touchscreen, backlight and battery. This driver also activates 177 platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots, 186 are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB 188 PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same 189 like CL4 in additional it has a PCMCIA-Slot. For more information
|
/Linux-v6.1/drivers/platform/x86/ |
D | x86-android-tablets.c | 1 // SPDX-License-Identifier: GPL-2.0+ 38 #include "../../gpio/gpiolib-acpi.h" 42 * (either IOAPIC index, or GPIO chip name + pin-number). 62 return gc->label && !strcmp(gc->label, data); in gpiochip_find_match_label() 73 return -ENODEV; in x86_android_tablet_get_gpiod() 97 switch (data->type) { in x86_acpi_irq_helper_get() 104 acpi_unregister_gsi(data->index); in x86_acpi_irq_helper_get() 105 irq = acpi_register_gsi(NULL, data->index, data->trigger, data->polarity); in x86_acpi_irq_helper_get() 107 pr_err("error %d getting APIC IRQ %d\n", irq, data->index); in x86_acpi_irq_helper_get() 112 ret = x86_android_tablet_get_gpiod(data->chip, data->index, &gpiod); in x86_acpi_irq_helper_get() [all …]
|
/Linux-v6.1/drivers/iio/adc/ |
D | at91-sama5d2_adc.c | 1 // SPDX-License-Identifier: GPL-2.0-only 14 #include <linux/dma-mapping.h> 31 #include <linux/nvmem-consumer.h> 36 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h> 45 /* Touchscreen Calibration */ 110 /* Interrupt Enable Register - TS X measurement ready */ 112 /* Interrupt Enable Register - TS Y measurement ready */ 114 /* Interrupt Enable Register - TS pressure measurement ready */ 116 /* Interrupt Enable Register - Data ready */ 118 /* Interrupt Enable Register - general overrun error */ [all …]
|