/Linux-v6.6/Documentation/devicetree/bindings/iio/ |
D | samsung,sensorhub-rinato.yaml | 66 interrupt-parent = <&gpx0>; 68 ap-mcu-gpios = <&gpx0 0 0>; 69 mcu-ap-gpios = <&gpx0 4 0>; 70 mcu-reset-gpios = <&gpx0 5 0>;
|
/Linux-v6.6/arch/arm/boot/dts/samsung/ |
D | exynos5250-snow-rev5.dts | 40 interrupt-parent = <&gpx0>; 51 samsung,pins = "gpx0-4";
|
D | exynos5410-odroidxu.dts | 175 intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; 176 connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; 188 interrupt-parent = <&gpx0>; 555 samsung,pins = "gpx0-0", "gpx0-1"; 562 samsung,pins = "gpx0-2"; 570 samsung,pins = "gpx0-4";
|
D | exynos4210-universal_c210.dts | 328 max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>, 329 <&gpx0 4 GPIO_ACTIVE_HIGH>; 345 interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>; 351 max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, 352 <&gpx0 6 GPIO_ACTIVE_HIGH>; 558 samsung,pins = "gpx0-7", "gpx2-7";
|
D | exynos4210-i9100.dts | 397 interrupt-parent = <&gpx0>; 416 interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>, 426 max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, 427 <&gpx0 6 GPIO_ACTIVE_HIGH>, 760 samsung,pins = "gpx0-7"; 770 samsung,pins = "gpx0-4";
|
D | exynos5250-snow-common.dtsi | 221 reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ 222 <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ 250 hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; 591 samsung,pins = "gpx0-1"; 598 samsung,pins = "gpx0-2";
|
D | exynos4210-origen.dts | 184 interrupt-parent = <&gpx0>; 327 samsung,pins = "gpx0-3", "gpx0-4";
|
D | exynos4210-trats.dts | 274 interrupt-parent = <&gpx0>; 295 interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, 305 max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, 306 <&gpx0 6 GPIO_ACTIVE_HIGH>,
|
D | exynos5420-peach-pit.dts | 147 reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ 626 interrupt-parent = <&gpx0>; 782 samsung,pins = "gpx0-0"; 789 samsung,pins = "gpx0-2"; 797 samsung,pins = "gpx0-6";
|
D | exynos5800-peach-pi.dts | 147 reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ 639 interrupt-parent = <&gpx0>; 764 samsung,pins = "gpx0-0"; 771 samsung,pins = "gpx0-2"; 779 samsung,pins = "gpx0-6";
|
D | exynos5420-galaxy-tab-common.dtsi | 70 gpios = <&gpx0 5 GPIO_ACTIVE_LOW>; 78 gpios = <&gpx0 2 GPIO_ACTIVE_LOW>; 85 gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
|
D | exynos5420-pinctrl.dtsi | 23 gpx0: gpx0-gpio-bank { label 62 samsung,pins = "gpx0-7";
|
D | exynos5410-smdk5410.dts | 121 interrupt-parent = <&gpx0>;
|
D | exynos5422-odroidxu3-common.dtsi | 33 gpios = <&gpx0 3 GPIO_ACTIVE_LOW>; 489 samsung,pins = "gpx0-3";
|
D | exynos5250-pinctrl.dtsi | 162 gpx0: gpx0-gpio-bank { label 590 samsung,pins = "gpx0-7";
|
D | exynos4412-galaxy-s3.dtsi | 82 interrupt-parent = <&gpx0>;
|
D | exynos4412-itop-elite.dts | 221 cd-gpios = <&gpx0 7 GPIO_ACTIVE_LOW>;
|
/Linux-v6.6/Documentation/devicetree/bindings/mfd/ |
D | max8998.txt | 92 max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */ 93 <&gpx0 1 1 0 0>; /* SET2 */ 99 max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
|
D | samsung,s2mps11.yaml | 140 interrupt-parent = <&gpx0>; 229 interrupt-parent = <&gpx0>;
|
D | maxim,max77686.yaml | 64 interrupt-parent = <&gpx0>;
|
/Linux-v6.6/Documentation/devicetree/bindings/regulator/ |
D | maxim,max8952.yaml | 95 max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>, 96 <&gpx0 4 GPIO_ACTIVE_HIGH>;
|
D | maxim,max8997.yaml | 293 interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, 303 max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, 304 <&gpx0 6 GPIO_ACTIVE_HIGH>, 411 interrupt-parent = <&gpx0>;
|
/Linux-v6.6/Documentation/devicetree/bindings/iio/light/ |
D | capella,cm36651.yaml | 43 interrupt-parent = <&gpx0>;
|
/Linux-v6.6/drivers/pinctrl/samsung/ |
D | pinctrl-exynos-arm.c | 177 EXYNOS_PIN_BANK_EINTW(8, 0xc00, "gpx0", 0x00), 277 EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), 394 EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), 485 EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), 586 EXYNOS_PIN_BANK_EINTW(8, 0xc00, "gpx0", 0x00), 678 EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), 760 EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
|
/Linux-v6.6/Documentation/devicetree/bindings/memory-controllers/ |
D | exynos-srom.yaml | 119 interrupt-parent = <&gpx0>;
|