| /Linux-v6.1/arch/arm/mach-pxa/ |
| D | mfp-pxa25x.h | 63 #define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
132 #define GPIO39_MMC_CS1 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
178 #define GPIO39_USB_VPO MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
|
| D | mfp-pxa27x.h | 148 #define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
256 #define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3)
316 #define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1)
355 #define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
|
| D | mfp-pxa930.h | 84 #define GPIO39_CI2C_SCL MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
190 #define GPIO39_LCD_DD16 MFP_CFG(GPIO39, AF1)
470 #define GPIO39_USB_ULPI_STP MFP_CFG(GPIO39, AF4)
486 #define GPIO39_CLK13MOUTDMD MFP_CFG(GPIO39, AF7)
|
| D | mfp-pxa320.h | 42 #define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1)
247 #define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2)
412 #define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4)
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | bcm2837-rpi-cm3-io3.dts | 58 "GPIO39",
|
| D | bcm2835-rpi-cm1-io1.dts | 58 "GPIO39",
|
| D | bcm2835-rpi-zero.dts | 75 "", /* GPIO39 */
|
| D | bcm2835-rpi-b.dts | 73 "", /* GPIO39 */
|
| D | bcm2836-rpi-2-b.dts | 80 "", /* GPIO39 */
|
| D | bcm2835-rpi-a.dts | 73 "", /* GPIO39 */
|
| D | bcm2835-rpi-b-rev2.dts | 73 "", /* GPIO39 */
|
| D | bcm2837-rpi-zero-2-w.dts | 86 "NC", /* GPIO39 */
|
| D | bcm2835-rpi-a-plus.dts | 78 "", /* GPIO39 */
|
| D | bcm2835-rpi-b-plus.dts | 80 "", /* GPIO39 */
|
| D | nuvoton-npcm750-runbmc-olympus-pincfg.dtsi | 131 gpio39_pins: gpio39-pins {
132 pins = "GPIO39/SMB3BSDA";
|
| /Linux-v6.1/drivers/pinctrl/bcm/ |
| D | pinctrl-bcm6362.c | 94 PINCTRL_PIN(39, "gpio39"),
199 BCM_PIN_GROUP(gpio39),
358 "gpio39",
|
| D | pinctrl-bcm63268.c | 103 PINCTRL_PIN(39, "gpio39"),
222 BCM_PIN_GROUP(gpio39),
358 "gpio39",
|
| /Linux-v6.1/arch/arm64/boot/dts/qcom/ |
| D | ipq6018-cp01-c1.dts | 59 pins = "gpio38", "gpio39", "gpio40", "gpio41";
|
| D | sc7180-idp.dts | 558 pins = "gpio39";
623 pins = "gpio38", "gpio39",
644 pins = "gpio39";
|
| /Linux-v6.1/drivers/pinctrl/qcom/ |
| D | pinctrl-ipq8074.c | 606 "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", "gpio43",
612 "gpio38", "gpio39", "gpio40", "gpio41",
616 "gpio38", "gpio39",
620 "gpio38", "gpio39", "gpio40", "gpio41",
793 "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
|
| D | pinctrl-qcs404.c | 554 "gpio39", "gpio39", "gpio40", "gpio40", "gpio41", "gpio41", "gpio41",
617 "gpio31", "gpio32", "gpio36", "gpio38", "gpio39", "gpio42", "gpio43",
752 "gpio39", "gpio45",
756 "gpio39", "gpio40",
760 "gpio39",
764 "gpio39",
|
| D | pinctrl-sc7180.c | 508 "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
527 "gpio37", "gpio38", "gpio39", "gpio42", "gpio44",
691 "gpio38", "gpio39", "gpio40", "gpio41",
694 "gpio39",
697 "gpio39",
700 "gpio39",
|
| /Linux-v6.1/drivers/pinctrl/ |
| D | pinctrl-xway.c | 155 MFP_XWAY(GPIO39, GPIO, EXIN, NONE, NONE),
203 static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9};
208 static const unsigned pins_exin3[] = {GPIO39};
694 MFP_XWAY(GPIO39, GPIO, NONE, EXIN, NONE),
713 static const unsigned xrx100_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9};
718 static const unsigned xrx100_pins_exin3[] = {GPIO39};
907 MFP_XWAY(GPIO39, GPIO, USIF, EXIN, NONE),
920 static const unsigned xrx200_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9};
925 static const unsigned xrx200_pins_exin3[] = {GPIO39};
942 static const unsigned xrx200_pins_usif_spi_cs1[] = {GPIO39};
[all …]
|
| D | pinctrl-lantiq.h | 145 GPIO39, enumerator
|
| /Linux-v6.1/Documentation/devicetree/bindings/pinctrl/ |
| D | cirrus,madera.yaml | 56 gpio34, gpio35, gpio36, gpio37, gpio38, gpio39 ]
|
