| /Linux-v6.1/arch/mips/include/asm/mach-au1x00/ |
| D | gpio-au1000.h | 15 * GPIO0-31 from GPIO1 block, GPIO200-215 from GPIO2 block.
36 /* register offsets within GPIO2 block */
281 * GPIO2 block macros for common linux GPIO functions. The 'gpio'
357 /* GPIO2 shared interrupts and control */
359 static inline void __alchemy_gpio2_mod_int(int gpio2, int en) in __alchemy_gpio2_mod_int() argument
364 r |= 1 << gpio2; in __alchemy_gpio2_mod_int()
366 r &= ~(1 << gpio2); in __alchemy_gpio2_mod_int()
372 * alchemy_gpio2_enable_int - Enable a GPIO2 pins' shared irq contribution.
373 * @gpio2: The GPIO2 pin to activate (200...215).
383 * GPIO2-based interrupts have their own request to the INTC. Please
[all …]
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | am335x-baltos-ir2110.dts | 27 …AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] D…
28 …AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DS…
29 …AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD …
30 …NF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
44 dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
45 dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
46 dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
47 rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
157 &gpio2 {
|
| D | am335x-baltos-ir3220.dts | 33 …AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] D…
34 …AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DS…
35 …AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD …
36 …NF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
65 dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
66 dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
67 dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
68 rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
128 cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
203 &gpio2 {
|
| D | am335x-baltos-ir5221.dts | 41 …AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] D…
42 …AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DS…
43 …AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD …
44 …NF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
73 dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
74 dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
75 dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
76 rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
152 cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
227 &gpio2 {
|
| D | am571x-idk.dts | 55 gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
62 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
68 gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
75 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
81 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
87 gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
122 gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
176 load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
|
| D | ste-hrefprev60-stuib.dts | 39 interrupt-parent = <&gpio2>;
41 touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
45 interrupt-parent = <&gpio2>;
47 touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
|
| D | ste-hrefv60plus-stuib.dts | 44 interrupt-parent = <&gpio2>;
46 touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
50 interrupt-parent = <&gpio2>;
52 touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
|
| D | kirkwood-l-50.dts | 65 gpio2: gpio-expander@20{ label
110 gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
116 gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
121 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
126 gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
133 gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
138 gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
145 gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
|
| D | am335x-netcom-plus-2xx.dts | 60 dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
61 dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
62 dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
63 rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
169 &gpio2 {
|
| D | nuvoton-npcm730-gsj.dts | 97 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
102 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
107 gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
112 gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
117 gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
122 gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
127 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
|
| D | imxrt1050-evk.dts | 21 gpio1 = &gpio2;
22 gpio2 = &gpio3;
70 cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
|
| /Linux-v6.1/drivers/media/pci/cx88/ |
| D | cx88-cards.c | 170 .gpio2 = 0x00F5e700,
177 .gpio2 = 0x00F5c700,
184 .gpio2 = 0x00F5c700,
191 .gpio2 = 0x00F5d700,
234 .gpio2 = 0x0000ff40,
240 .gpio2 = 0x0000ff40,
246 .gpio2 = 0x0000ff40,
253 .gpio2 = 0x0000ff20,
268 .gpio2 = 0x0035e700,
275 .gpio2 = 0x0035c700,
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/phy/ |
| D | phy-mapphone-mdm6600.txt | 18 power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
19 reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
25 motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
26 <&gpio2 21 GPIO_ACTIVE_HIGH>,
27 <&gpio2 23 GPIO_ACTIVE_HIGH>;
|
| /Linux-v6.1/Documentation/devicetree/bindings/input/ |
| D | gpio-matrix-keypad.txt | 36 row-gpios = <&gpio2 25 0
37 &gpio2 26 0
38 &gpio2 27 0>;
40 col-gpios = <&gpio2 21 0
41 &gpio2 22 0>;
|
| /Linux-v6.1/Documentation/devicetree/bindings/sound/ |
| D | cirrus,cs35l41.yaml | 107 Note that the options are different from the GPIO2 pin
116 cirrus,gpio2-polarity-invert:
118 Boolean which specifies whether the GPIO2
122 cirrus,gpio2-output-enable:
124 Boolean which specifies whether the GPIO2 pin
129 cirrus,gpio2-src-select:
131 Configures the function of the GPIO2 pin.
|
| /Linux-v6.1/arch/arm64/boot/dts/freescale/ |
| D | fsl-lx2160a-clearfog-itx.dtsi | 30 gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
37 mod-def0-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
44 mod-def0-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
51 mod-def0-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
58 mod-def0-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
|
| /Linux-v6.1/drivers/video/fbdev/omap/ |
| D | lcd_h3.c | 22 /* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */ in h3_panel_enable()
25 r = tps65010_set_gpio_out_value(GPIO2, HIGH); in h3_panel_enable()
36 /* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */ in h3_panel_disable()
39 tps65010_set_gpio_out_value(GPIO2, LOW); in h3_panel_disable()
|
| /Linux-v6.1/Documentation/devicetree/bindings/pinctrl/ |
| D | cirrus,lochnagar.yaml | 81 enum: [ fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
82 fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
84 codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
86 gf-gpio2, gf-gpio3, gf-gpio7, codec-aif1-bclk,
116 enum: [ aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
117 fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
119 codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
121 gf-gpio2, gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5,
|
| /Linux-v6.1/Documentation/devicetree/bindings/gpio/ |
| D | gpio-max3191x.txt | 53 maxim,modesel-gpios = <&gpio2 23>;
54 maxim,fault-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
55 maxim,db0-gpios = <&gpio2 25>;
56 maxim,db1-gpios = <&gpio2 26>;
|
| /Linux-v6.1/drivers/hwmon/ |
| D | atxp1.c | 45 u8 gpio2; /* General purpose I/O register 2 */ member
64 data->reg.gpio2 = i2c_smbus_read_byte_data(client, ATXP1_GPIO2); in atxp1_update_device()
195 /* sys file functions for GPIO2 */
204 size = sprintf(buf, "0x%02x\n", data->reg.gpio2); in gpio2_show()
222 if (value != data->reg.gpio2) { in gpio2_store()
234 * GPIO2 data register
237 static DEVICE_ATTR_RW(gpio2);
|
| /Linux-v6.1/Documentation/devicetree/bindings/display/ |
| D | solomon,ssd1307fb.yaml | 237 reset-gpios = <&gpio2 7>;
244 reset-gpios = <&gpio2 7>;
260 reset-gpios = <&gpio2 7>;
261 dc-gpios = <&gpio2 8>;
269 reset-gpios = <&gpio2 7>;
270 dc-gpios = <&gpio2 8>;
|
| /Linux-v6.1/Documentation/devicetree/bindings/display/ti/ |
| D | ti,tpd12s015.txt | 20 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
21 <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
22 <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
|
| /Linux-v6.1/drivers/gpio/ |
| D | gpio-winbond.c | 104 /* GPIO1, GPIO2, SUSLED logical device */
367 * GPIO2 (the second port) shares some pins with a basic PC in winbond_gpio_get_info()
519 pr_warn("disabling GPIO2.5 and GPIO2.6 as I2C is enabled\n"); in winbond_gpio_configure_port1_check_i2c()
545 /* GPIO1 and GPIO2 need some (additional) special handling */ in winbond_gpio_configure_port()
702 "bitmask of GPIO ports to enable (bit 0 - GPIO1, bit 1 - GPIO2, etc.");
711 "bitmask of GPIO ports to set to push-pull mode (bit 0 - GPIO1, bit 1 - GPIO2, etc.");
715 "bitmask of GPIO ports to set to open drain mode (bit 0 - GPIO1, bit 1 - GPIO2, etc.");
718 * GPIO2.0 and GPIO2.1 control a basic PC functionality that we
725 "enable changing value of GPIO2.0 bit (Power LED), default no.");
729 "enable changing value of GPIO2.1 bit (BEEP), default no.");
|
| /Linux-v6.1/Documentation/devicetree/bindings/hwmon/ |
| D | gpio-fan.txt | 34 gpios = <&gpio2 14 1
35 &gpio2 13 1>;
39 alarm-gpios = <&gpio2 15 1>;
|
| /Linux-v6.1/Documentation/devicetree/bindings/power/supply/ |
| D | maxim,max8903.yaml | 63 dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
64 flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
66 cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
|
