| /Linux-v5.10/arch/arm/boot/dts/ |
| D | exynos5422-cpus.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
13 * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
15 * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
16 * from the LITTLE: Cortex-A7.
21 #address-cells = <1>;
22 #size-cells = <0>;
26 compatible = "arm,cortex-a7";
29 clock-frequency = <1000000000>;
30 cci-control-port = <&cci_control0>;
31 operating-points-v2 = <&cluster_a7_opp_table>;
[all …]
|
| D | vexpress-v2p-ca15_a7.dts | 1 // SPDX-License-Identifier: GPL-2.0
6 * Cortex-A15_A7 MPCore (V2P-CA15_A7)
8 * HBI-0249A
11 /dts-v1/;
12 #include "vexpress-v2m-rs1.dtsi"
15 model = "V2P-CA15_CA7";
18 compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
19 interrupt-parent = <&gic>;
20 #address-cells = <2>;
21 #size-cells = <2>;
[all …]
|
| D | rk3288.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/interrupt-controller/irq.h>
5 #include <dt-bindings/interrupt-controller/arm-gic.h>
6 #include <dt-bindings/pinctrl/rockchip.h>
7 #include <dt-bindings/clock/rk3288-cru.h>
8 #include <dt-bindings/power/rk3288-power.h>
9 #include <dt-bindings/thermal/thermal.h>
10 #include <dt-bindings/soc/rockchip,boot-mode.h>
13 #address-cells = <2>;
[all …]
|
| /Linux-v5.10/arch/arm64/boot/dts/arm/ |
| D | juno-r2.dts | 9 /dts-v1/;
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include "juno-base.dtsi"
13 #include "juno-cs-r1r2.dtsi"
17 compatible = "arm,juno-r2", "arm,juno", "arm,vexpress";
18 interrupt-parent = <&gic>;
19 #address-cells = <2>;
20 #size-cells = <2>;
27 stdout-path = "serial0:115200n8";
31 compatible = "arm,psci-0.2";
[all …]
|
| D | juno.dts | 4 * Copyright (c) 2013-2014 ARM Ltd.
9 /dts-v1/;
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include "juno-base.dtsi"
17 interrupt-parent = <&gic>;
18 #address-cells = <2>;
19 #size-cells = <2>;
26 stdout-path = "serial0:115200n8";
30 compatible = "arm,psci-0.2";
35 #address-cells = <2>;
[all …]
|
| /Linux-v5.10/Documentation/driver-api/thermal/ |
| D | cpu-cooling-api.rst | 22 --------------------------------------------
30 "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
42 the name "thermal-cpufreq-%x" linking it with a device tree node, in
54 This interface function unregisters the "thermal-cpufreq-%x" cooling device.
58 2. Power models
61 The power API registration functions provide a simple power model for
62 CPUs. The current power is calculated as dynamic power (static power isn't
63 supported currently). This power model requires that the operating-points of
70 The dynamic power consumption of a processor depends on many factors.
73 - The time the processor spends running, consuming dynamic power, as
[all …]
|
| D | cpu-idle-cooling.rst | 1 .. SPDX-License-Identifier: GPL-2.0
8 ----------
13 act on a cooling device to mitigate the dissipated power. When the
18 increase even after the dynamic leakage is reduced to its minimum by
20 to the static leakage. The only solution is to power down the
21 component, thus dropping the dynamic and static leakage that will
24 Last but not least, the system can ask for a specific power budget but
25 because of the OPP density, we can only choose an OPP with a power
26 budget lower than the requested one and under-utilize the CPU, thus
27 losing performance. In other words, one OPP under-utilizes the CPU
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/arm/ |
| D | cpus.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
21 with updates for 32-bit and 64-bit ARM systems provided in this document.
30 - square brackets define bitfields, eg reg[7:0] value of the bitfield in
59 On 32-bit ARM v7 or later systems this property is
68 On ARM v8 64-bit systems this property is required
71 * If cpus node's #address-cells property is set to 2
79 * If cpus node's #address-cells property is set to 1
[all …]
|
| /Linux-v5.10/include/linux/ |
| D | devfreq_cooling.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
6 * Copyright (C) 2014-2015 ARM Limited
18 * struct devfreq_cooling_power - Devfreq cooling power ops
19 * @get_static_power: Take voltage, in mV, and return the static power
20 * in mW. If NULL, the static power is assumed
23 * return the dynamic power draw in mW. If NULL,
24 * a simple power model is used.
25 * @dyn_power_coeff: Coefficient for the simple dynamic power model in
28 * dynamic power is calculated as
31 * device driver for the actual power.
[all …]
|
| D | energy_model.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
14 * em_perf_state - Performance state of a performance domain
16 * @power: The power consumed at this level, in milli-watts (by 1 CPU or
17 by a registered device). It can be a total power: static and
18 dynamic.
19 * @cost: The cost coefficient associated with this level, used during
20 * energy calculation. Equal to: power * max_frequency / frequency
24 unsigned long power; member
29 * em_perf_domain - Performance domain
39 * must have the same micro-architecture. Performance domains often have
[all …]
|
| /Linux-v5.10/arch/arm64/boot/dts/mediatek/ |
| D | mt8183.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
8 #include <dt-bindings/clock/mt8183-clk.h>
9 #include <dt-bindings/interrupt-controller/arm-gic.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/reset-controller/mt8183-resets.h>
12 #include <dt-bindings/phy/phy.h>
13 #include "mt8183-pinfunc.h"
17 interrupt-parent = <&sysirq>;
18 #address-cells = <2>;
19 #size-cells = <2>;
[all …]
|
| D | mt8173.dtsi | 14 #include <dt-bindings/clock/mt8173-clk.h>
15 #include <dt-bindings/interrupt-controller/irq.h>
16 #include <dt-bindings/interrupt-controller/arm-gic.h>
17 #include <dt-bindings/memory/mt8173-larb-port.h>
18 #include <dt-bindings/phy/phy.h>
19 #include <dt-bindings/power/mt8173-power.h>
20 #include <dt-bindings/reset/mt8173-resets.h>
21 #include <dt-bindings/gce/mt8173-gce.h>
22 #include <dt-bindings/thermal/thermal.h>
23 #include "mt8173-pinfunc.h"
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/thermal/ |
| D | thermal-idle.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/thermal/thermal-idle.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Daniel Lezcano <daniel.lezcano@linaro.org>
22 const: thermal-idle
24 A thermal-idle node describes the idle cooling device properties to
27 '#cooling-cells':
31 the cooling-maps reference. The first cell is the minimum cooling state
34 duration-us:
[all …]
|
| D | thermal-cooling-devices.yaml | 1 # SPDX-License-Identifier: (GPL-2.0)
4 ---
5 $id: http://devicetree.org/schemas/thermal/thermal-cooling-devices.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Amit Kucheria <amitk@kernel.org>
20 - thermal-sensor: device that measures temperature, has SoC-specific bindings
21 - cooling-device: device used to dissipate heat either passively or actively
22 - thermal-zones: a container of the following node types used to describe all
27 There are essentially two ways to provide control on power dissipation:
28 - Passive cooling: by means of regulating device performance. A typical
[all …]
|
| /Linux-v5.10/arch/arm64/boot/dts/hisilicon/ |
| D | hi6220.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/interrupt-controller/arm-gic.h>
9 #include <dt-bindings/reset/hisi,hi6220-resets.h>
10 #include <dt-bindings/clock/hi6220-clock.h>
11 #include <dt-bindings/pinctrl/hisi.h>
12 #include <dt-bindings/thermal/thermal.h>
16 interrupt-parent = <&gic>;
17 #address-cells = <2>;
18 #size-cells = <2>;
21 compatible = "arm,psci-0.2";
[all …]
|
| D | hi3660.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/interrupt-controller/arm-gic.h>
9 #include <dt-bindings/clock/hi3660-clock.h>
10 #include <dt-bindings/thermal/thermal.h>
14 interrupt-parent = <&gic>;
15 #address-cells = <2>;
16 #size-cells = <2>;
19 compatible = "arm,psci-0.2";
24 #address-cells = <2>;
25 #size-cells = <0>;
[all …]
|
| /Linux-v5.10/drivers/opp/ |
| D | of.c | 1 // SPDX-License-Identifier: GPL-2.0-only
5 * Copyright (C) 2009-2010 Texas Instruments Incorporated.
31 /* "operating-points-v2" can be an array for power domain providers */ in _opp_of_get_opp_desc_node()
32 return of_parse_phandle(np, "operating-points-v2", index); in _opp_of_get_opp_desc_node()
38 return _opp_of_get_opp_desc_node(dev->of_node, 0); in dev_pm_opp_of_get_opp_desc_node()
47 np = _opp_of_get_opp_desc_node(dev->of_node, index); in _managed_opp()
52 if (opp_table->np == np) { in _managed_opp()
55 * so will have same node-pointer, np. in _managed_opp()
58 * OPP table contains a "opp-shared" property. in _managed_opp()
60 if (opp_table->shared_opp == OPP_TABLE_ACCESS_SHARED) { in _managed_opp()
[all …]
|
| /Linux-v5.10/arch/arm64/boot/dts/qcom/ |
| D | sc7180.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause
8 #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
9 #include <dt-bindings/clock/qcom,gcc-sc7180.h>
10 #include <dt-bindings/clock/qcom,gpucc-sc7180.h>
11 #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
12 #include <dt-bindings/clock/qcom,rpmh.h>
13 #include <dt-bindings/clock/qcom,videocc-sc7180.h>
14 #include <dt-bindings/interconnect/qcom,osm-l3.h>
15 #include <dt-bindings/interconnect/qcom,sc7180.h>
16 #include <dt-bindings/interrupt-controller/arm-gic.h>
[all …]
|
| D | sdm845.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/clock/qcom,camcc-sdm845.h>
9 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
10 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
11 #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
12 #include <dt-bindings/clock/qcom,lpass-sdm845.h>
13 #include <dt-bindings/clock/qcom,rpmh.h>
14 #include <dt-bindings/clock/qcom,videocc-sdm845.h>
15 #include <dt-bindings/interconnect/qcom,osm-l3.h>
16 #include <dt-bindings/interconnect/qcom,sdm845.h>
[all …]
|
| /Linux-v5.10/drivers/staging/media/ipu3/include/ |
| D | intel-ipu3.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
2 /* Copyright (C) 2017 - 2018 Intel Corporation */
11 /* Vendor specific - used for IPU3 camera sub-system */
15 /* from include/uapi/linux/v4l2-controls.h */
24 #define IPU3_UAPI_GRID_START_MASK ((1 << 12) - 1)
32 * struct ipu3_uapi_grid_config - Grid plane config
48 * create a grid-based output, and the data is then divided into "slices".
79 * struct ipu3_uapi_awb_raw_buffer - AWB raw buffer
90 * struct ipu3_uapi_awb_config_s - AWB config
110 * struct ipu3_uapi_awb_config - AWB config wrapper
[all …]
|
| /Linux-v5.10/arch/arm64/boot/dts/rockchip/ |
| D | rk3399.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/clock/rk3399-cru.h>
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/interrupt-controller/arm-gic.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/pinctrl/rockchip.h>
11 #include <dt-bindings/power/rk3399-power.h>
12 #include <dt-bindings/thermal/thermal.h>
17 interrupt-parent = <&gic>;
18 #address-cells = <2>;
[all …]
|
| D | rk3328.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/clock/rk3328-cru.h>
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/interrupt-controller/arm-gic.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/pinctrl/rockchip.h>
11 #include <dt-bindings/power/rk3328-power.h>
12 #include <dt-bindings/soc/rockchip,boot-mode.h>
13 #include <dt-bindings/thermal/thermal.h>
18 interrupt-parent = <&gic>;
[all …]
|
| D | px30.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/clock/px30-cru.h>
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/interrupt-controller/arm-gic.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/pinctrl/rockchip.h>
11 #include <dt-bindings/power/px30-power.h>
12 #include <dt-bindings/soc/rockchip,boot-mode.h>
13 #include <dt-bindings/thermal/thermal.h>
18 interrupt-parent = <&gic>;
[all …]
|
| /Linux-v5.10/drivers/cpufreq/ |
| D | mediatek-cpufreq.c | 1 // SPDX-License-Identifier: GPL-2.0-only
4 * Author: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
26 * on each CPU power/clock domain of Mediatek SoCs. Each CPU cluster in
29 * 100mV < Vsram - Vproc < 200mV
54 if (cpumask_test_cpu(cpu, &info->cpus)) in mtk_cpu_dvfs_info_lookup()
64 struct regulator *proc_reg = info->proc_reg; in mtk_cpufreq_voltage_tracking()
65 struct regulator *sram_reg = info->sram_reg; in mtk_cpufreq_voltage_tracking()
80 * then set Vproc to (Vsram - 100mV). in mtk_cpufreq_voltage_tracking()
110 vsram - VOLT_TOL, in mtk_cpufreq_voltage_tracking()
118 vproc = vsram - MIN_VOLT_SHIFT; in mtk_cpufreq_voltage_tracking()
[all …]
|
| /Linux-v5.10/sound/soc/codecs/ |
| D | sta350.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Codec driver for ST STA350 2.1-channel high-efficiency digital audio system
35 #include <sound/soc-dapm.h>
58 /* Power-up register defaults */
157 /* regulator power supply names */
159 "vdd-dig", /* digital supply, 3.3V */
160 "vdd-pll", /* pll supply, 3.3V */
161 "vcc" /* power amp supply, 5V - 26V */
182 static const DECLARE_TLV_DB_SCALE(mvol_tlv, -12750, 50, 1);
183 static const DECLARE_TLV_DB_SCALE(chvol_tlv, -7950, 50, 1);
[all …]
|
