| /Linux-v5.10/drivers/scsi/qla2xxx/ |
| D | qla_devtbl.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
8 "QLA2340", "133MHz PCI-X to 2Gb FC, Single Channel", /* 0x100 */
9 "QLA2342", "133MHz PCI-X to 2Gb FC, Dual Channel", /* 0x101 */
10 "QLA2344", "133MHz PCI-X to 2Gb FC, Quad Channel", /* 0x102 */
11 "QCP2342", "cPCI to 2Gb FC, Dual Channel", /* 0x103 */
12 "QSB2340", "SBUS to 2Gb FC, Single Channel", /* 0x104 */
13 "QSB2342", "SBUS to 2Gb FC, Dual Channel", /* 0x105 */
14 "QLA2310", "Sun 66MHz PCI-X to 2Gb FC, Single Channel", /* 0x106 */
15 "QLA2332", "Sun 66MHz PCI-X to 2Gb FC, Single Channel", /* 0x107 */
16 "QCP2332", "Sun cPCI to 2Gb FC, Dual Channel", /* 0x108 */
[all …]
|
| /Linux-v5.10/drivers/gpu/drm/imx/ |
| D | imx-ldb.c | 1 // SPDX-License-Identifier: GPL-2.0+
3 * i.MX drm driver - LVDS display bridge
11 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
31 #include "imx-drm.h"
33 #define DRIVER_NAME "imx-ldb"
90 struct imx_ldb_channel channel[2]; member
102 struct imx_ldb *ldb = imx_ldb_ch->ldb; in imx_ldb_ch_set_bus_format()
103 int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; in imx_ldb_ch_set_bus_format() local
109 if (imx_ldb_ch->chno == 0 || dual) in imx_ldb_ch_set_bus_format()
110 ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH0_24; in imx_ldb_ch_set_bus_format()
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/ |
| D | trivial-devices.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/trivial-devices.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Rob Herring <robh@kernel.org>
28 - enum:
29 … # SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin
30 - ad,ad7414
31 # ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems
32 - ad,adm9240
[all …]
|
| /Linux-v5.10/Documentation/fb/ |
| D | viafb.rst | 6 --------
15 ---------------
34 ----------------------
47 - 640x480 (default)
48 - 720x480
49 - 800x600
50 - 1024x768
53 - 8, 16, 32 (default:32)
56 - 60, 75, 85, 100, 120 (default:60)
59 - 0 : expansion (default)
[all …]
|
| /Linux-v5.10/drivers/video/fbdev/via/ |
| D | dvi.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
4 * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
20 /* Resolution: 640x480, Channel: single, Dithering: Enable */
22 /* Resolution: 800x600, Channel: single, Dithering: Enable */
24 /* Resolution: 1024x768, Channel: single, Dithering: Enable */
26 /* Resolution: 1280x768, Channel: single, Dithering: Enable */
28 /* Resolution: 1280x1024, Channel: dual, Dithering: Enable */
30 /* Resolution: 1400x1050, Channel: dual, Dithering: Enable */
32 /* Resolution: 1600x1200, Channel: dual, Dithering: Enable */
|
| D | lcd.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
4 * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
18 /* Resolution: 640x480, Channel: single, Dithering: Enable */
20 /* Resolution: 800x600, Channel: single, Dithering: Enable */
22 /* Resolution: 1024x768, Channel: single, Dithering: Enable */
24 /* Resolution: 1280x768, Channel: single, Dithering: Enable */
26 /* Resolution: 1280x1024, Channel: dual, Dithering: Enable */
28 /* Resolution: 1400x1050, Channel: dual, Dithering: Enable */
30 /* Resolution: 1600x1200, Channel: dual, Dithering: Enable */
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/gpio/ |
| D | gpio-xilinx.txt | 3 Dual channel GPIO controller with configurable number of pins
4 (from 1 to 32 per channel). Every pin can be configured as
6 local interrupts can be enabled on channel basis.
9 - compatible : Should be "xlnx,xps-gpio-1.00.a"
10 - reg : Address and length of the register set for the device
11 - #gpio-cells : Should be two. The first cell is the pin number and the
13 - gpio-controller : Marks the device node as a GPIO controller.
16 - interrupts : Interrupt mapping for GPIO IRQ.
17 - xlnx,all-inputs : if n-th bit is setup, GPIO-n is input
18 - xlnx,dout-default : if n-th bit is 1, GPIO-n default value is 1
[all …]
|
| /Linux-v5.10/drivers/w1/slaves/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
3 # 1-wire slaves configuration
6 menu "1-wire Slaves"
11 Say Y here if you want to connect 1-wire thermal sensors to your
17 Say Y here if you want to connect 1-wire
23 Say Y or M here if you want to use a DS2405 1-wire
24 single-channel addressable switch.
25 This device can also work as a single-channel
29 tristate "8-Channel Addressable Switch (IO Expander) 0x29 family support (DS2408)"
31 Say Y here if you want to use a 1-wire
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/iio/adc/ |
| D | xilinx-xadc.txt | 13 - compatible: Should be one of
14 * "xlnx,zynq-xadc-1.00.a": When using the ZYNQ device
16 * "xlnx,axi-xadc-1.00.a": When using the axi-xadc pcore to
18 - reg: Address and length of the register set for the device
19 - interrupts: Interrupt for the XADC control interface.
20 - clocks: When using the ZYNQ this must be the ZYNQ PCAP clock,
21 when using the AXI-XADC pcore this must be the clock that provides the
25 - xlnx,external-mux:
30 * "dual": External multiplexer mode is used with two
32 - xlnx,external-mux-channel: Configures which pair of pins is used to
[all …]
|
| D | microchip,mcp3911.yaml | 1 # SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
4 ---
6 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
8 title: Microchip MCP3911 Dual channel analog front end (ADC)
11 - Marcus Folkesson <marcus.folkesson@gmail.com>
12 - Kent Gustavsson <nedo80@gmail.com>
15 Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be
21 - microchip,mcp3911
26 spi-max-frequency:
39 microchip,device-addr:
[all …]
|
| /Linux-v5.10/Documentation/scsi/ |
| D | advansys.rst | 1 .. SPDX-License-Identifier: GPL-2.0
8 RISC-based, Bus-Mastering, Fast (10 Mhz) and Ultra (20 Mhz) Narrow
9 (8-bit transfer) SCSI Host Adapters for the ISA, EISA, VL, and PCI
10 buses and RISC-based, Bus-Mastering, Ultra (20 Mhz) Wide (16-bit
21 - ABP-480 - Bus-Master CardBus (16 CDB)
24 - ABP510/5150 - Bus-Master ISA (240 CDB)
25 - ABP5140 - Bus-Master ISA PnP (16 CDB)
26 - ABP5142 - Bus-Master ISA PnP with floppy (16 CDB)
27 - ABP902/3902 - Bus-Master PCI (16 CDB)
28 - ABP3905 - Bus-Master PCI (16 CDB)
[all …]
|
| D | aic79xx.rst | 1 .. SPDX-License-Identifier: GPL-2.0
28 AIC-7901A Single Channel 64-bit PCI-X 133MHz to
30 AIC-7901B Single Channel 64-bit PCI-X 133MHz to
32 AIC-7902A4 Dual Channel 64-bit PCI-X 133MHz to
34 AIC-7902B Dual Channel 64-bit PCI-X 133MHz to
41 Adaptec SCSI Card 39320 Dual Channel 64-bit PCI-X 133MHz to 7902A4/7902B
43 68-pin, two internal 68-pin)
44 Adaptec SCSI Card 39320A Dual Channel 64-bit PCI-X 133MHz to 7902B
46 68-pin, two internal 68-pin)
47 Adaptec SCSI Card 39320D Dual Channel 64-bit PCI-X 133MHz to 7902A4
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/display/imx/ |
| D | ldb.txt | 1 Device-Tree bindings for LVDS Display Bridge (ldb)
6 The LVDS Display Bridge device tree node contains up to two lvds-channel
10 - #address-cells : should be <1>
11 - #size-cells : should be <0>
12 - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
15 interfaces as input for each LVDS channel.
16 - gpr : should be <&gpr> on i.MX53 and i.MX6q.
17 The phandle points to the iomuxc-gpr region containing the LVDS
19 - clocks, clock-names : phandles to the LDB divider and selector clocks and to
21 Documentation/devicetree/bindings/clock/clock-bindings.txt
[all …]
|
| /Linux-v5.10/arch/arm/boot/dts/ |
| D | sun8i-v3s-licheepi-zero-dock.dts | 4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
43 #include "sun8i-v3s-licheepi-zero.dts"
45 #include <dt-bindings/input/input.h>
49 compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
50 "allwinner,sun8i-v3s";
59 broken-cd;
60 bus-width = <4>;
61 vmmc-supply = <®_vcc3v3>;
66 vref-supply = <®_vcc3v0>;
[all …]
|
| D | sun6i-a31s-inet-q972.dts | 4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
43 /dts-v1/;
44 #include "sun6i-a31s.dtsi"
45 #include "sun6i-reference-design-tablet.dtsi"
49 compatible = "inet-tek,inet-q972", "allwinner,sun6i-a31s";
60 compatible = "edt,edt-ft5406";
62 interrupt-parent = <&pio>;
64 touchscreen-size-x = <768>;
65 touchscreen-size-y = <1024>;
[all …]
|
| D | sun8i-a23-evb.dts | 4 * Maxime Ripard <maxime.ripard@free-electrons.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
45 /dts-v1/;
46 #include "sun8i-a23.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/input/input.h>
54 compatible = "allwinner,sun8i-a23-evb", "allwinner,sun8i-a23";
63 stdout-path = "serial0:115200n8";
[all …]
|
| D | sun4i-a10-inet97fv2.dts | 6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
45 /dts-v1/;
46 #include "sun4i-a10.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/input/input.h>
51 #include <dt-bindings/interrupt-controller/irq.h>
54 model = "INet-97F Rev 02";
55 compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
[all …]
|
| D | sunxi-reference-design-tablet.dtsi | 4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
43 #include <dt-bindings/gpio/gpio.h>
44 #include <dt-bindings/input/input.h>
45 #include "sunxi-common-regulators.dtsi"
48 pinctrl-names = "default";
49 pinctrl-0 = <&i2c0_pins>;
54 pinctrl-names = "default";
55 pinctrl-0 = <&i2c1_pins>;
60 vref-supply = <®_vcc3v0>;
[all …]
|
| /Linux-v5.10/drivers/staging/sm750fb/ |
| D | sm750.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
17 sm750_dualTFT = 2, /* dual 18 bit tft */
21 /* vga channel is not concerned */
135 int channel;/* which channel this crtc stands for*/ member
138 /* below attributes belong to info->fix, their value depends on specific adaptor*/
160 int *channel; member
162 * which channel these outputs linked with,for sm750:
163 * *channel=0 means primary channel
164 * *channel=1 means secondary channel
165 * output->channel ==> &crtc->channel
[all …]
|
| /Linux-v5.10/Documentation/staging/ |
| D | rpmsg.rst | 17 flavor of real-time OS.
19 OMAP4, for example, has dual Cortex-A9, dual Cortex-M3 and a C64x+ DSP.
20 Typically, the dual cortex-A9 is running Linux in a SMP configuration,
25 hardware accelerators, and therefore are often used to offload CPU-intensive
28 These remote processors could also be used to control latency-sensitive
34 hardware accessible only by the remote processor, reserving kernel-controlled
37 Rpmsg is a virtio-based messaging bus that allows kernel drivers to communicate
54 Every rpmsg device is a communication channel with a remote processor (thus
59 When a driver starts listening on a channel, its rx callback is bound with
60 a unique rpmsg local address (a 32-bit integer). This way when inbound messages
[all …]
|
| /Linux-v5.10/drivers/iio/dac/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
10 tristate "Analog Devices AD5064 and similar multi-channel DAC driver"
14 AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R, AD5627, AD5627R,
28 AD5362, AD5363, AD5370, AD5371, AD5373 multi-channel
41 AD5382, AD5383, AD5384, AD5390, AD5391, AD5392 multi-channel
51 Say yes here to build support for Analog Devices AD5421 loop-powered
52 digital-to-analog convertors (DAC).
58 tristate "Analog Devices AD5446 and similar single channel DACs driver"
128 tristate "Analog Devices AD5686 and similar multi-channel DACs (SPI)"
140 tristate "Analog Devices AD5696 and similar multi-channel DACs (I2C)"
[all …]
|
| /Linux-v5.10/drivers/iio/adc/ |
| D | ad7887.c | 1 // SPDX-License-Identifier: GPL-2.0-only
5 * Copyright 2010-2011 Analog Devices Inc.
28 #define AD7887_REF_DIS BIT(5) /* on-chip reference disable */
29 #define AD7887_DUAL BIT(4) /* dual-channel mode */
30 #define AD7887_CH_AIN1 BIT(3) /* convert on channel 1, DUAL=1 */
31 #define AD7887_CH_AIN0 0 /* convert on channel 0, DUAL=0,1 */
44 * struct ad7887_chip_info - chip specifc information
48 * @dual_channels: channels specification in dual mode
49 * @num_dual_channels: number of channels in dual mode
87 switch (*indio_dev->active_scan_mask) { in ad7887_ring_preenable()
[all …]
|
| /Linux-v5.10/drivers/net/wireless/intel/iwlwifi/fw/api/ |
| D | rs.h | 3 * This file is provided under a dual BSD/GPLv2 license. When using or
8 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
10 * Copyright(c) 2018 - 2020 Intel Corporation
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
30 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
32 * Copyright(c) 2018 - 2020 Intel Corporation
68 * enum iwl_tlc_mng_cfg_flags_enum - options for TLC config flags
74 * @IWL_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_1_MSK: enable HE Dual Carrier Modulation
77 * @IWL_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_2_MSK: enable HE Dual Carrier Modulation
90 * enum iwl_tlc_mng_cfg_cw - channel width options
[all …]
|
| /Linux-v5.10/drivers/net/can/usb/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
12 tristate "EMS CPC-USB/ARM7 CAN/USB interface"
14 This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
15 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
20 This driver supports the CAN-USB/2 interface
39 - Kvaser Leaf Light
40 - Kvaser Leaf Professional HS
41 - Kvaser Leaf SemiPro HS
42 - Kvaser Leaf Professional LS
43 - Kvaser Leaf Professional SWC
[all …]
|
| /Linux-v5.10/Documentation/driver-api/ |
| D | edac.rst | 5 ----------------------------------------
8 *sockets, *socket sets*, *banks*, *rows*, *chip-select rows*, *channels*,
28 called DIMM (Dual Inline Memory Module).
35 * Channel
37 A memory controller channel, responsible to communicate with a group of
38 DIMMs. Each channel has its own independent control (command) and data
43 It is typically the highest hierarchy on a Fully-Buffered DIMM memory
52 * Single-channel
55 only. E. g. if the data is 64 bits-wide, the data flows to the CPU using
57 memories. FB-DIMM and RAMBUS use a different concept for channel, so
[all …]
|
