| /Linux-v6.1/Documentation/devicetree/bindings/memory-controllers/ |
| D | ti-aemif.txt | 4 provide a glue-less interface to a variety of asynchronous memory devices like
11 Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
12 OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
13 Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
17 - compatible: "ti,davinci-aemif"
18 "ti,keystone-aemif"
19 "ti,da850-aemif"
21 - reg: contains offset/length value for AEMIF control registers
24 - #address-cells: Must be 2. The partition number has to be encoded in the
25 first address cell and it may accept values 0..N-1
[all …]
|
| D | arm,pl172.txt | 5 - compatible: Must be "arm,primecell" and exactly one from
8 - reg: Must contains offset/length value for controller.
10 - #address-cells: Must be 2. The partition number has to be encoded in the
11 first address cell and it may accept values 0..N-1
12 (N - total number of partitions). The second cell is the
15 - #size-cells: Must be set to 1.
17 - ranges: Must contain one or more chip select memory regions.
19 - clocks: Must contain references to controller clocks.
21 - clock-names: Must contain "mpmcclk" and "apb_pclk".
23 - clock-ranges: Empty property indicating that child nodes can inherit
[all …]
|
| D | st,stm32-fmc2-ebi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
14 - to translate AXI transactions into the appropriate external device
16 - to meet the access time requirements of the external devices
22 - Christophe Kerello <christophe.kerello@foss.st.com>
26 const: st,stm32mp1-fmc2-ebi
37 "#address-cells":
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/gpio/ |
| D | spear_spics.txt | 1 === ST Microelectronics SPEAr SPI CS Driver ===
17 * compatible: should be defined as "st,spear-spics-gpio"
19 * st-spics,peripcfg-reg: peripheral configuration register offset
20 * st-spics,sw-enable-bit: bit offset to enable sw control
21 * st-spics,cs-value-bit: bit offset to drive chipselect low or high
22 * st-spics,cs-enable-mask: chip select number bit mask
23 * st-spics,cs-enable-shift: chip select number program offset
24 * gpio-controller: Marks the device node as gpio controller
25 * #gpio-cells: should be 1 and will mention chip select number
30 -------
[all …]
|
| /Linux-v6.1/drivers/memory/ |
| D | ti-aemif.c | 1 // SPDX-License-Identifier: GPL-2.0-only
5 * Copyright (C) 2010 - 2013 Texas Instruments Incorporated. http://www.ti.com/
8 * Murali Karicheri <m-karicheri2@ti.com>
20 #include <linux/platform_data/ti-aemif.h>
84 * struct aemif_cs_data: structure to hold cs parameters
85 * @cs: chip-select number
98 u8 cs; member
116 * @num_cs: number of assigned chip-selects
117 * @cs_offset: start number of cs nodes
118 * @cs_data: array of chip-select settings
[all …]
|
| /Linux-v6.1/include/uapi/misc/ |
| D | habanalabs.h | 1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
3 * Copyright 2016-2022 HabanaLabs, Ltd.
15 * Defines that are asic-specific but constitutes as ABI between kernel driver
33 /* Max number of elements in timestamps registration buffers */
196 * stream id is a running number from 0 up to (N-1), where N is the number
653 * enum hl_goya_dma_direction - Direction of DMA operation inside a LIN_DMA packet that is
665 * @HL_DMA_ENUM_MAX: number of values in enum
680 * enum hl_device_status - Device status information.
711 * Notifier event values - for the notification mechanism and the HL_INFO_GET_EVENTS command
713 * HL_NOTIFIER_EVENT_TPC_ASSERT - Indicates TPC assert event
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/spi/ |
| D | spi-davinci.txt | 4 Keystone 2 - https://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf
5 dm644x - https://www.ti.com/lit/ug/sprue32a/sprue32a.pdf
6 OMAP-L138/da830 - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
9 - #address-cells: number of cells required to define a chip select
11 - #size-cells: should be zero.
12 - compatible:
13 - "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
14 - "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
15 - "ti,keystone-spi" for SPI used similar to that on Keystone2 SoC
17 - reg: Offset and length of SPI controller register space
[all …]
|
| D | spi-controller.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/spi/spi-controller.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Mark Brown <broonie@kernel.org>
20 pattern: "^spi(@.*|-[0-9a-f])*$"
22 "#address-cells":
25 "#size-cells":
28 cs-gpios:
31 If that property is used, the number of chip selects will be
[all …]
|
| D | spi-lantiq-ssc.txt | 4 - compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi",
5 "intel,lgm-spi"
6 - #address-cells: see spi-bus.txt
7 - #size-cells: see spi-bus.txt
8 - reg: address and length of the spi master registers
9 - interrupts:
10 For compatible "intel,lgm-ssc" - the common interrupt number for
18 - clocks: spi clock phandle
19 - num-cs: see spi-bus.txt, set to 8 if unset
20 - base-cs: the number of the first chip select, set to 1 if unset.
[all …]
|
| D | spi-cadence.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/spi/spi-cadence.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Michal Simek <michal.simek@xilinx.com>
13 - $ref: "spi-controller.yaml#"
18 - cdns,spi-r1p6
19 - xlnx,zynq-spi-r1p6
27 clock-names:
29 - const: ref_clk
[all …]
|
| /Linux-v6.1/drivers/net/slip/ |
| D | slhc.c | 21 * - Initial distribution.
28 * - 01-31-90 initial adaptation (from 1.19)
29 * PPP.05 02-15-90 [ks]
30 * PPP.08 05-02-90 [ks] use PPP protocol field to signal compression
31 * PPP.15 09-90 [ks] improve mbuf handling
32 * PPP.16 11-02 [karn] substantially rewritten to use NOS facilities
34 * - Feb 1991 Bill_Simpson@um.cc.umich.edu
35 * variable number of conversation slots
39 * - Jul 1994 Dmitry Gorodchanin
41 * - Oct 1994 Dmitry Gorodchanin
[all …]
|
| /Linux-v6.1/Documentation/usb/ |
| D | gadget_configfs.rst | 19 a number of interfaces which, from the gadget's perspective, are known as
22 Linux provides a number of functions for gadgets to use.
50 http://www.spinics.net/lists/linux-usb/msg76388.html)
55 $ mount none $CONFIGFS_HOME -t configfs
60 -----------------------
81 A gadget also needs its serial number, manufacturer and product strings.
89 $ echo <serial number> > strings/0x409/serialnumber
94 ------------------------------
96 Each gadget will consist of a number of configurations, their corresponding
99 $ mkdir configs/<name>.<number>
[all …]
|
| /Linux-v6.1/kernel/time/ |
| D | clocksource.c | 1 // SPDX-License-Identifier: GPL-2.0+
20 #include "tick-internal.h"
24 * clocks_calc_mult_shift - calculate mult/shift factors for scaled math of clocks
59 sftacc--; in clocks_calc_mult_shift()
66 for (sft = 32; sft > 0; sft--) { in clocks_calc_mult_shift()
78 /*[Clocksource internal variables]---------
88 * Name of the user-specified clocksource.
100 * Also a default for cs->uncertainty_margin when registering clocks.
108 * a lower bound for cs->uncertainty_margin values when registering clocks.
141 static void __clocksource_change_rating(struct clocksource *cs, int rating);
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/bus/ |
| D | imx-weim.txt | 5 wireless and mobile applications that use low-power technology.
11 - compatible: Should contain one of the following:
12 "fsl,imx1-weim"
13 "fsl,imx27-weim"
14 "fsl,imx51-weim"
15 "fsl,imx50-weim"
16 "fsl,imx6q-weim"
17 - reg: A resource specifier for the register space
19 - clocks: the clock, see the example below.
20 - #address-cells: Must be set to 2 to allow memory address translation
[all …]
|
| D | nvidia,tegra20-gmi.txt | 10 - compatible : Should contain one of the following:
11 For Tegra20 must contain "nvidia,tegra20-gmi".
12 For Tegra30 must contain "nvidia,tegra30-gmi".
13 - reg: Should contain GMI controller registers location and length.
14 - clocks: Must contain an entry for each entry in clock-names.
15 - clock-names: Must include the following entries: "gmi"
16 - resets : Must contain an entry for each entry in reset-names.
17 - reset-names : Must include the following entries: "gmi"
18 - #address-cells: The number of cells used to represent physical base
20 - #size-cells: The number of cells used to represent the size of an address
[all …]
|
| /Linux-v6.1/arch/x86/include/asm/ |
| D | ptrace.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
14 * NB: 32-bit x86 CPUs are inconsistent as what happens in the
17 * - pushl %seg: some do a 16-bit write and leave the high
19 * - movl %seg, [mem]: some do a 16-bit write despite the movl
20 * - IDT entry: some (e.g. 486) will leave the high bits of CS
23 * Fortunately, x86-32 doesn't read the high bits on POP or IRET,
24 * so we can just treat all of the segment registers as 16-bit
41 * On interrupt, gs and __gsh store the vector number. They never
49 unsigned short cs; member
61 * C ABI says these regs are callee-preserved. They aren't saved on kernel entry
[all …]
|
| /Linux-v6.1/drivers/gpu/drm/i915/gt/ |
| D | gen6_engine_cs.c | 1 // SPDX-License-Identifier: MIT
18 * Emits a PIPE_CONTROL with a non-zero post-sync operation, for
22 * [DevSNB-C+{W/A}] Before any depth stall flush (including those
23 * produced by non-pipelined state commands), software needs to first
24 * send a PIPE_CONTROL with no bits set except Post-Sync Operation !=
27 * [Dev-SNB{W/A}]: Before a PIPE_CONTROL with Write Cache Flush Enable
28 * =1, a PIPE_CONTROL with any non-zero post-sync-op is required.
32 * [Dev-SNB{W/A}]: Pipe-control with CS-stall bit set must be sent
33 * BEFORE the pipe-control with a post-sync op and no write-cache
41 * - Render Target Cache Flush Enable ([12] of DW1)
[all …]
|
| /Linux-v6.1/drivers/mfd/ |
| D | atmel-smc.c | 1 // SPDX-License-Identifier: GPL-2.0-only
8 * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
11 #include <linux/mfd/syscon/atmel-smc.h>
15 * atmel_smc_cs_conf_init - initialize a SMC CS conf
16 * @conf: the SMC CS conf to initialize
27 * atmel_smc_cs_encode_ncycles - encode a number of MCK clk cycles in the
29 * @ncycles: number of MCK clk cycles
40 * If the @ncycles value is too big to be encoded, -ERANGE is returned and
49 unsigned int lsbmask = GENMASK(msbpos - 1, 0); in atmel_smc_cs_encode_ncycles()
50 unsigned int msbmask = GENMASK(msbwidth - 1, 0); in atmel_smc_cs_encode_ncycles()
[all …]
|
| /Linux-v6.1/drivers/s390/char/ |
| D | raw3270.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
44 #define TF_INMDT 0xc1 /* Visible, Set-MDT */
55 /* Extended-Highlighting Bytes */
80 #define RAW3270_FIRSTMINOR 1 /* First minor number */
81 #define RAW3270_MAXDEVS 255 /* Max number of 3270 devices */
123 return list_empty(&rq->list); in raw3270_request_final()
159 unsigned char *ascebc; /* ascii -> ebcdic table */
179 atomic_inc(&view->ref_count); in raw3270_get_view()
187 if (atomic_dec_return(&view->ref_count) == 0) in raw3270_put_view()
219 struct string *cs, *tmp; in alloc_string() local
[all …]
|
| /Linux-v6.1/drivers/clocksource/ |
| D | mmio.c | 1 // SPDX-License-Identifier: GPL-2.0-only
22 return (u64)readl_relaxed(to_mmio_clksrc(c)->reg); in clocksource_mmio_readl_up()
27 return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask; in clocksource_mmio_readl_down()
32 return (u64)readw_relaxed(to_mmio_clksrc(c)->reg); in clocksource_mmio_readw_up()
37 return ~(u64)readw_relaxed(to_mmio_clksrc(c)->reg) & c->mask; in clocksource_mmio_readw_down()
41 * clocksource_mmio_init - Initialize a simple mmio based clocksource
46 * @bits: Number of valid bits
53 struct clocksource_mmio *cs; in clocksource_mmio_init() local
56 return -EINVAL; in clocksource_mmio_init()
58 cs = kzalloc(sizeof(struct clocksource_mmio), GFP_KERNEL); in clocksource_mmio_init()
[all …]
|
| /Linux-v6.1/drivers/misc/habanalabs/common/ |
| D | habanalabs.h | 1 /* SPDX-License-Identifier: GPL-2.0
3 * Copyright 2016-2022 HabanaLabs, Ltd.
19 #include <linux/dma-direction.h>
28 #include <linux/io-64-nonatomic-lo-hi.h>
30 #include <linux/dma-buf.h>
38 * bits[63:59] - Encode mmap type
39 * bits[45:0] - mmap offset value
44 #define HL_MMAP_TYPE_SHIFT (59 - PAGE_SHIFT)
98 * enum hl_mmu_page_table_location - mmu page table location
99 * @MMU_DR_PGT: page-table is located on device DRAM.
[all …]
|
| /Linux-v6.1/Documentation/ABI/testing/ |
| D | sysfs-kernel-slab | 4 Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
5 Christoph Lameter <cl@linux-foundation.org>
16 Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
17 Christoph Lameter <cl@linux-foundation.org>
19 The aliases file is read-only and specifies how many caches
25 Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
26 Christoph Lameter <cl@linux-foundation.org>
28 The align file is read-only and specifies the cache's object
34 Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
35 Christoph Lameter <cl@linux-foundation.org>
[all …]
|
| /Linux-v6.1/arch/arm/plat-orion/ |
| D | pcie.c | 2 * arch/arm/plat-orion/pcie.c
16 #include <plat/addr-map.h>
28 #define PCIE_BAR_CTRL_OFF(n) (0x1804 + ((n - 1) * 4))
98 * MV-S104860-U0, Rev. C: in orion_pcie_reset()
101 * This bit should be cleared after the link is re-established. in orion_pcie_reset()
120 * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
121 * WIN[0-3] -> DRAM bank[0-3]
154 for (i = 0; i < dram->num_cs; i++) { in orion_pcie_setup_wins()
155 const struct mbus_dram_window *cs = dram->cs + i; in orion_pcie_setup_wins() local
157 writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i)); in orion_pcie_setup_wins()
[all …]
|
| /Linux-v6.1/lib/ |
| D | string.c | 1 // SPDX-License-Identifier: GPL-2.0
11 * found in <asm-xx/string.h>), or get overloaded by FORTIFY_SOURCE.
29 #include <asm/word-at-a-time.h>
34 * strncasecmp - Case insensitive, length-limited string comparison
37 * @len: the maximum number of characters to compare
58 } while (--len); in strncasecmp()
59 return (int)c1 - (int)c2; in strncasecmp()
73 return c1 - c2; in strcasecmp()
80 * strcpy - Copy a %NUL terminated string
97 * strncpy - Copy a length-limited, C-string
[all …]
|
| /Linux-v6.1/drivers/mtd/nand/raw/ |
| D | au1550nd.c | 1 // SPDX-License-Identifier: GPL-2.0-only
15 #include <asm/mach-au1x00/au1000.h>
16 #include <asm/mach-au1x00/au1550nd.h>
23 int cs; member
33 * au_write_buf - write buffer to chip
36 * @len: number of bytes to write
48 writeb(p[i], ctx->base + MEM_STNAND_DATA); in au_write_buf()
54 * au_read_buf - read chip data into buffer
57 * @len: number of bytes to read
69 p[i] = readb(ctx->base + MEM_STNAND_DATA); in au_read_buf()
[all …]
|
