| /Linux-v6.1/Documentation/devicetree/bindings/pinctrl/ |
| D | lantiq,pinctrl-xway.txt | 53 gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2,
64 asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
75 clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2
85 gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3,
96 spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
111 stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1,
|
| D | cirrus,lochnagar.yaml | 124 clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | am335x-base0033.dts | 46 AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */
71 AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */
|
| D | am43xx-clocks.dtsi | 804 clkout1_osc_div_ck: clock-clkout1-osc-div-ck {
814 clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck {
824 clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck {
834 clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck {
845 clkout1_mux_ck: clock-clkout1-mux-ck {
855 clkout1_ck: clock-clkout1-ck {
|
| D | rk3288-vmarc-som.dtsi | 61 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
| D | exynos4210.dtsi | 510 clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
|
| /Linux-v6.1/Documentation/devicetree/bindings/clock/ |
| D | silabs,si5351.txt | 103 * overwrite clkout1 configuration with:
109 clkout1 {
|
| D | maxim,max9485.txt | 25 If not explicitly set, the output names are "mclkout", "clkout", "clkout1"
|
| D | ti,lmk04832.yaml | 203 clkout1@1 {
|
| D | stericsson,u8500-clks.yaml | 122 possible values are 0 (CLKOUT1) and 1 (CLKOUT2).
|
| /Linux-v6.1/drivers/clk/ |
| D | clk-lochnagar.c | 106 LN1_CLK(GF_CLKOUT1, "ln-gf-clkout1", GF_AIF1),
113 LN2_CLK(GF_CLKOUT1, "ln-gf-clkout1"),
|
| D | clk-rk808.c | 171 init.name = "rk808-clkout1"; in rk808_clkout_probe()
|
| D | clk-max9485.c | 229 .name = "clkout1",
|
| D | Kconfig | 90 Clkout1 is always on, Clkout2 can off by control register.
|
| /Linux-v6.1/drivers/pinctrl/ |
| D | pinctrl-xway.c | 267 GRP_MUX("clkout1", CGU, pins_clkout1),
300 static const char * const xway_cgu_grps[] = {"clkout0", "clkout1",
436 GRP_MUX("clkout1", CGU, ase_pins_clkout1),
448 static const char * const ase_cgu_grps[] = {"clkout0", "clkout1",
599 GRP_MUX("clkout1", CGU, danube_pins_clkout1),
621 static const char * const danube_cgu_grps[] = {"clkout0", "clkout1",
807 GRP_MUX("clkout1", CGU, xrx100_pins_clkout1),
832 static const char * const xrx100_cgu_grps[] = {"clkout0", "clkout1",
1047 GRP_MUX("clkout1", CGU, xrx200_pins_clkout1),
1078 static const char * const xrx200_cgu_grps[] = {"clkout0", "clkout1",
[all …]
|
| /Linux-v6.1/drivers/clk/samsung/ |
| D | clk-s3c2410-dclk.c | 301 "clkout1", dclk_variant->clkout1_parent_names, in s3c24xx_dclk_probe()
320 "clkout1", NULL); in s3c24xx_dclk_probe()
|
| /Linux-v6.1/arch/arm64/boot/dts/rockchip/ |
| D | px30-engicam-px30-core.dtsi | 56 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
| D | rk3399-evb.dts | 183 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
| D | rk3399pro-vmarc-som.dtsi | 77 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
| D | rk3566-roc-pc.dts | 212 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
| D | rk3566-soquartz.dtsi | 172 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
| /Linux-v6.1/sound/soc/sh/rcar/ |
| D | adg.c | 17 #define CLKOUT1 1 macro
478 [CLKOUT1] = "audio_clkout1", in rsnd_adg_get_clkout()
|
| /Linux-v6.1/drivers/clk/ux500/ |
| D | clk-prcmu.c | 367 if (!strcmp(name, "clkout1")) in clk_reg_prcmu_clkout()
|
| /Linux-v6.1/Documentation/devicetree/bindings/mfd/ |
| D | rockchip,rk817.yaml | 204 clock-output-names = "rk808-clkout1", "xin32k";
|
| /Linux-v6.1/include/linux/mfd/ |
| D | dbx500-prcmu.h | 88 /* These are only valid for CLKOUT1: */
|
