| /Linux-v5.15/drivers/net/mdio/ |
| D | Kconfig | 61 This module provides a driver for the MDIO busses found in the
92 This module provides a driver for the MDIO busses found in the
99 This module provides a driver for the Broadcom UniMAC MDIO busses.
112 Supports GPIO lib-based MDIO busses.
121 This module provides a driver for the MDIO busses found in the
203 multiplexers which connect one of several child MDIO busses
204 to a parent bus. Switching between child busses is done by
247 several child MDIO busses to a parent bus. Child bus
258 bus multiplexer connects one of several child MDIO busses to
269 The multiplexer connects one of several child MDIO busses to a
|
| /Linux-v5.15/Documentation/devicetree/bindings/i2c/ |
| D | i2c-mux.yaml | 13 An i2c bus multiplexer/switch will have several child busses that are numbered
18 i2c child busses and other child nodes, the 'i2c-mux' subnode can be used for
19 populating the i2c child busses. If an 'i2c-mux' subnode is present, only
20 subnodes of this will be considered as i2c child busses.
|
| D | i2c-fsi.txt | 1 Device-tree bindings for FSI-attached I2C master and busses
11 - child nodes : Nodes to describe busses off the I2C
|
| D | i2c.txt | 1 Generic device tree bindings for I2C busses
5 busses and their child devices in a device tree.
|
| /Linux-v5.15/Documentation/devicetree/bindings/media/ |
| D | video-interfaces.yaml | 61 a device is partitioned into multiple data busses, e.g. 16-bit input port
62 divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width
103 Number of data lines actively used, valid for the parallel busses.
109 On the parallel data busses, if bus-width is used to specify the number of
171 lane. This property is valid for serial busses only (e.g. MIPI CSI-2).
181 clock lane on hardware lane 0. This property is valid for serial busses
208 (normal). This property is valid for serial busses only.
|
| D | samsung-s5c73m3.txt | 5 data busses. The I2C bus is the main control bus and additionally the SPI bus
60 For more details see description of the SPI busses bindings
|
| /Linux-v5.15/drivers/i2c/muxes/ |
| D | Kconfig | 28 I2C busses connected through a MUX, which is controlled
41 I2C busses connected through a MUX, which in turn is controlled
96 I2C busses connected through a MUX, which is controlled
116 I2C busses connected through a MUX, which is controlled
|
| /Linux-v5.15/Documentation/devicetree/bindings/w1/ |
| D | w1.txt | 1 Generic devicetree bindings for onewire (w1) busses
4 Onewire busses are described through nodes of their master bus controller.
|
| /Linux-v5.15/drivers/i2c/busses/ |
| D | i2c-amd-mp2-pci.c | 212 i2c_common = privdata->busses[bus_id]; in amd_mp2_irq_isr()
256 if (privdata->busses[i2c_common->bus_id]) { in amd_mp2_register_cb()
261 privdata->busses[i2c_common->bus_id] = i2c_common; in amd_mp2_register_cb()
271 privdata->busses[i2c_common->bus_id] = NULL; in amd_mp2_unregister_cb()
386 i2c_common = privdata->busses[bus_id]; in amd_mp2_pci_suspend()
417 i2c_common = privdata->busses[bus_id]; in amd_mp2_pci_resume()
|
| D | i2c-amd-mp2.h | 172 * @busses: MP2 devices may have up to two busses,
181 struct amd_i2c_common *busses[2]; member
|
| /Linux-v5.15/Documentation/devicetree/bindings/display/ |
| D | mipi-dsi-bus.txt | 1 MIPI DSI (Display Serial Interface) busses
35 supporting such a configuration generally requires the data on both the busses
76 busses. Each DSI bus/channel drives some portion of the pixel data (generally
78 The graph bindings should be used to represent the multiple DSI busses that are
|
| /Linux-v5.15/Documentation/devicetree/bindings/interrupt-controller/ |
| D | msi.txt | 8 used with other busses, and hence a mechanism is required to relate devices on
9 those busses to the MSI controllers which they are capable of using,
73 When #msi-cells is non-zero, busses with an msi-parent will require
|
| D | aspeed,ast2xxx-scu-ic.txt | 10 fires new interrupts for child busses
|
| D | aspeed,ast2400-i2c-ic.txt | 13 new interrupts for child busses
|
| /Linux-v5.15/Documentation/driver-api/media/ |
| D | tx-rx.rst | 15 The following busses are the most common. This section discusses these two only.
28 `BT.601`_ and `BT.656`_ are the most common parallel busses.
38 bus. These are common for both busses.
|
| /Linux-v5.15/arch/alpha/include/asm/ |
| D | pci.h | 13 * The following structure is used to manage multiple PCI busses.
19 /* A controller. Used to manage multiple PCI busses. */
|
| /Linux-v5.15/arch/parisc/include/asm/ |
| D | pci.h | 13 ** Newer platforms number the busses across PCI bus adapters *sparsely*.
148 * But legacy platforms also need to renumber the busses below a Host
156 * the busses rather than treat each Dino as a separate PCI domain.
|
| /Linux-v5.15/arch/powerpc/include/asm/ |
| D | pmac_low_i2c.h | 37 /* multibus : device node holds multiple busses, bus number is
43 /* i2c busses in the system */
|
| /Linux-v5.15/arch/powerpc/platforms/powermac/ |
| D | low_i2c.c | 12 * powermac that covers the various types of i2c busses used in Apple machines.
14 * banging busses found on older chipsets in earlier machines if we ever need
598 /* Probe keywest-i2c busses */ in kw_i2c_probe()
610 * nodes) might cause us to not create some busses that are in kw_i2c_probe()
612 * want to work around that by creating busses without a node in kw_i2c_probe()
912 * type as older device trees mix i2c busses and other things in smu_i2c_probe()
1447 * Initialize us: probe all i2c busses on the machine, instantiate
1448 * busses and platform functions as needed.
1459 /* Probe keywest-i2c busses */ in pmac_i2c_init()
1463 /* Probe PMU i2c busses */ in pmac_i2c_init()
[all …]
|
| /Linux-v5.15/Documentation/driver-api/ |
| D | eisa.rst | 11 status as other much more mainstream busses such as PCI or USB. This
13 abstractions to manage busses, devices and drivers.
208 care must be taken when ripping out the EISA code, so other busses
|
| /Linux-v5.15/arch/powerpc/boot/dts/ |
| D | currituck.dts | 144 /* This drives busses 0 to 0xf */
181 /* This drives busses 0 to 0xf */
218 /* This drives busses 0 to 0xf */
|
| /Linux-v5.15/sound/aoa/soundbus/ |
| D | Kconfig | 15 This option enables support for Apple I2S busses.
|
| /Linux-v5.15/Documentation/x86/x86_64/ |
| D | boot-options.rst | 233 pci=assign-busses
234 Assign busses
238 Scan up to NUMBER busses, no matter what the mptable says.
|
| /Linux-v5.15/include/linux/spi/ |
| D | spi_gpio.h | 11 * Use spi_board_info with these busses in the usual way.
|
| /Linux-v5.15/drivers/fpga/ |
| D | Kconfig | 113 isolate one region of the FPGA from the busses while that
124 region of the FPGA from the busses while that region is
|
