| /Linux-v6.1/Documentation/devicetree/bindings/regulator/ |
| D | maxim,max8997.yaml | 57 max8997,pmic-buck5-dvs-voltage:
62 A set of 8 voltage values in micro-volt (uV) units for buck5 when
79 max8997,pmic-buck5-uses-gpio-dvs:
82 buck5 can be controlled by GPIO DVS.
249 - max8997,pmic-buck5-dvs-voltage
256 max8997,pmic-buck5-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
267 - max8997,pmic-buck5-uses-gpio-dvs
276 max8997,pmic-buck5-dvs-voltage:
298 max8997,pmic-buck5-uses-gpio-dvs;
317 max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
[all …]
|
| D | nxp,pca9450-regulator.yaml | 21 #BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
143 buck5: BUCK5 {
144 regulator-name = "BUCK5";
|
| D | rohm,bd71847-regulator.yaml | 21 regulator-boot-on at least for BUCK5. LDO6 is supplied by it and it must
22 not be disabled by driver at startup. If BUCK5 is disabled at startup the
26 #BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
|
| D | rohm,bd71815-regulator.yaml | 20 buck1, buck2, buck3, buck4, buck5,
47 should be "ldo1", ..., "ldo5", "buck1", ..., "buck5" and "ldolpsr"
|
| D | 88pm800.txt | 14 buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
|
| /Linux-v6.1/drivers/regulator/ |
| D | tps65086-regulator.c | 17 enum tps65086_regulators { BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, LDOA1, enumerator
134 TPS65086_REGULATOR("BUCK5", "buck5", BUCK5, 0x80, TPS65086_BUCK5VID,
176 case BUCK5: in tps65086_of_parse_cb()
|
| D | bd718x7-regulator.c | 271 * BD71837 BUCK5
332 * BD71847 BUCK5
861 .name = "buck5",
862 .of_match = of_match_ptr("BUCK5"),
1035 /* LDO6 is supplied by buck5 */
1036 .supply_name = "buck5",
1222 .name = "buck5",
1223 .of_match = of_match_ptr("BUCK5"),
|
| /Linux-v6.1/arch/arm64/boot/dts/freescale/ |
| D | imx8mn-ddr4-evk.dts | 86 // BUCK5 in datasheet
101 buck5_reg: BUCK5 {
103 regulator-name = "buck5";
|
| D | imx8mp-icore-mx8mp.dtsi | 71 buck5: BUCK5 { label
76 regulator-name = "BUCK5";
|
| D | imx8mn-ddr3l-evk.dts | 57 buck5: BUCK5 { label
|
| D | imx8mp-phycore-som.dtsi | 129 buck5: BUCK5 { label
130 regulator-compatible = "BUCK5";
|
| D | imx8mn-evk.dts | 71 buck5: BUCK5{ label
|
| D | imx8mq-pico-pi.dts | 115 buck5: BUCK5 { label
116 regulator-name = "buck5";
|
| D | imx8mm-beacon-som.dtsi | 140 // BUCK5 in datasheet
157 buck5_reg: BUCK5 {
159 regulator-name = "buck5";
|
| D | imx8mq-phanbell.dts | 171 buck5: BUCK5 { label
172 regulator-name = "buck5";
|
| D | imx8mn-beacon-som.dtsi | 149 // BUCK5 in datasheet
166 buck5_reg: BUCK5 {
168 regulator-name = "buck5";
|
| D | imx8mm-emcon.dtsi | 434 // BUCK5 in datasheet
451 buck5_reg: BUCK5 {
453 regulator-name = "BUCK5";
|
| D | imx8mm-kontron-sl.dtsi | 146 reg_vdd_1v8: BUCK5 {
147 regulator-name = "+1V8 (BUCK5)";
|
| D | imx8mm-kontron-osm-s.dtsi | 147 reg_vdd_1v8: BUCK5 {
148 regulator-name = "+1V8 (BUCK5)";
|
| D | imx8mp-tqma8mpql.dtsi | 115 buck5_reg: BUCK5 {
116 regulator-name = "BUCK5";
|
| D | imx8mm-evk.dtsi | 221 // BUCK5 in datasheet
238 buck5_reg: BUCK5 {
240 regulator-name = "buck5";
|
| /Linux-v6.1/Documentation/devicetree/bindings/mfd/ |
| D | rohm,bd71815-pmic.yaml | 149 buck5: buck5 {
150 regulator-name = "buck5";
|
| D | rohm,bd71828-pmic.yaml | 135 buck5: BUCK5 {
136 regulator-name = "buck5";
|
| D | rohm,bd71847-pmic.yaml | 183 buck5: BUCK5 {
184 regulator-name = "buck5";
|
| D | rohm,bd71837-pmic.yaml | 181 buck5: BUCK5 {
182 regulator-name = "buck5";
|
