| /Linux-v6.1/Documentation/devicetree/bindings/mfd/ |
| D | samsung,s5m8767.yaml | 55 s5m8767,pmic-buck4-dvs-voltage:
60 A set of 8 voltage values in micro-volt (uV) units for buck4 when
78 s5m8767,pmic-buck4-uses-gpio-dvs:
80 description: buck4 can be controlled by gpio dvs.
106 description: Power supply for buck4
148 s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
151 …s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage…
162 s5m8767,pmic-buck4-uses-gpio-dvs: false
170 s5m8767,pmic-buck4-uses-gpio-dvs: false
174 - s5m8767,pmic-buck4-uses-gpio-dvs
[all …]
|
| D | richtek,rt5120.yaml | 59 description: phandle for buck4 input power source
154 buck4 {
155 regulator-name = "rt5120-buck4";
|
| D | da9052-i2c.txt | 22 buck4 : regulator BUCK PERI
61 buck4 {
|
| D | rohm,bd71815-pmic.yaml | 143 buck4: buck4 {
144 regulator-name = "buck4";
|
| D | rohm,bd71828-pmic.yaml | 130 buck4: BUCK4 {
131 regulator-name = "buck4";
|
| D | rohm,bd71847-pmic.yaml | 177 buck4: BUCK4 {
178 regulator-name = "buck4";
|
| D | rohm,bd71837-pmic.yaml | 174 buck4: BUCK4 {
175 regulator-name = "buck4";
|
| D | st,stpmic1.yaml | 91 - buck4 for Buck BUCK4
317 buck4 {
|
| /Linux-v6.1/Documentation/devicetree/bindings/regulator/ |
| D | richtek,rt5190a-regulator.yaml | 38 description: phandle to buck4 input voltage.
61 regulator description for buck1 to buck4, and ldo.
126 buck4 {
127 regulator-name = "rt5190a-buck4";
|
| D | nxp,pca9450-regulator.yaml | 21 #BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
136 buck4: BUCK4 {
137 regulator-name = "BUCK4";
|
| D | 88pm800.txt | 14 buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
|
| /Linux-v6.1/drivers/regulator/ |
| D | tps65086-regulator.c | 17 enum tps65086_regulators { BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, LDOA1, enumerator
130 TPS65086_REGULATOR("BUCK4", "buck4", BUCK4, 0x80, TPS65086_BUCK4VID,
175 case BUCK4: in tps65086_of_parse_cb()
|
| D | mp5416.c | 131 * DVS ramp rate BUCK1 to BUCK4
170 MP5416BUCK("buck4", 4, mp5416_I_limits2, MP5416_REG_CTL2, BIT(5), 2),
181 MP5416BUCK("buck4", 4, mp5416_I_limits2, MP5416_REG_CTL2, BIT(5), 1),
|
| D | mcp16502.c | 97 /* Ramp delay (uV/us) for buck2, buck3, buck4. */
138 BUCK4, enumerator
313 case BUCK4: in mcp16502_set_voltage_time_sel()
477 MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops,
|
| D | da9052-regulator.c | 334 DA9052_DCDC(BUCK4, buck4, 50, 1800, 3600, 5, 6, 0),
351 DA9052_DCDC(BUCK4, buck4, 25, 950, 2525, 6, 6, 0),
|
| D | pca9450-regulator.c | 111 * BUCK4/5/6
313 .name = "buck4",
314 .of_match = of_match_ptr("BUCK4"),
522 .name = "buck4",
523 .of_match = of_match_ptr("BUCK4"),
|
| D | stpmic1_regulator.c | 380 .desc = REG_BUCK(BUCK4, buck4),
542 MATCH(buck4, BUCK4),
|
| /Linux-v6.1/arch/arm64/boot/dts/freescale/ |
| D | imx8mp-icore-mx8mp.dtsi | 63 buck4: BUCK4 { label
68 regulator-name = "BUCK4";
|
| D | imx8mp-dhcom-som.dtsi | 36 vin-supply = <&buck4>;
50 vin-supply = <&buck4>;
268 buck4: BUCK4 { /* VDD_3V3 */ label
269 regulator-compatible = "BUCK4";
367 vio-supply = <&buck4>;
481 vmmc-supply = <&buck4>;
521 vmmc-supply = <&buck4>;
|
| D | imx8mn-ddr3l-evk.dts | 49 buck4: BUCK4 { label
|
| D | imx8mp-phycore-som.dtsi | 121 buck4: BUCK4 { label
122 regulator-compatible = "BUCK4";
|
| D | imx8mn-evk.dts | 63 buck4: BUCK4{ label
|
| D | imx8mn-ddr4-evk.dts | 92 buck4_reg: BUCK4 {
94 regulator-name = "buck4";
|
| D | imx8mq-pico-pi.dts | 107 buck4: BUCK4 { label
108 regulator-name = "buck4";
|
| D | imx8mq-phanbell.dts | 162 buck4: BUCK4 { label
163 regulator-name = "buck4";
|
