| /Linux-v5.15/Documentation/devicetree/bindings/regulator/ |
| D | rohm,bd70528-regulator.txt | 4 - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3",
12 BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2
33 buck3: BUCK3 {
34 regulator-name = "buck3";
|
| D | samsung,s5m8767.txt | 20 - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
21 units for buck3 when changing voltage using gpio dvs. Refer to [1] below
42 - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
86 s5m8767,pmic-buck3-uses-gpio-dvs;
104 s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
|
| D | pv88080.txt | 17 BUCK1, BUCK2, BUCK3 and HVBUCK.
47 BUCK3 {
48 regulator-name = "buck3";
|
| D | pv88090.txt | 11 BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
42 BUCK3 {
43 regulator-name = "buck3";
|
| D | richtek,rtq2134-regulator.yaml | 93 buck3 {
94 regulator-name = "rtq2134-buck3";
|
| D | nxp,pca9450-regulator.yaml | 21 #BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
23 #Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C.
|
| D | 88pm860x.txt | 23 BUCK3 {
|
| /Linux-v5.15/Documentation/devicetree/bindings/mfd/ |
| D | ti,lp87524-q1.yaml | 45 - buck3
61 - buck3-in-supply
82 buck3-in-supply = <&vdd_5v0>;
106 buck3_reg: buck3 {
107 regulator-name = "buck3";
|
| D | rohm,bd70528-pmic.txt | 66 buck3: BUCK3 {
67 regulator-name = "buck3";
|
| D | da9052-i2c.txt | 21 buck3 : regulator BUCK MEM
56 buck3 {
|
| D | rohm,bd71828-pmic.yaml | 125 buck3: BUCK3 {
126 regulator-name = "buck3";
|
| D | rohm,bd71815-pmic.yaml | 137 buck3: buck3 {
138 regulator-name = "buck3";
|
| D | rohm,bd71847-pmic.yaml | 171 buck3: BUCK3 {
172 regulator-name = "buck3";
|
| D | st,stpmic1.yaml | 90 - buck3 for Buck BUCK3
309 buck3 {
|
| D | rohm,bd71837-pmic.yaml | 167 buck3: BUCK3 {
168 regulator-name = "buck3";
|
| D | da9062.txt | 58 buck3 : BUCK_3
69 buck3 : BUCK_3
|
| /Linux-v5.15/drivers/regulator/ |
| D | tps65086-regulator.c | 25 enum tps65086_regulators { BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, LDOA1, enumerator
134 TPS65086_REGULATOR("BUCK3", "buck3", BUCK3, 0x80, TPS65086_BUCK3VID,
182 case BUCK3: in tps65086_of_parse_cb()
|
| D | lp8788-buck.c | 84 BUCK3, enumerator
393 .name = "buck3",
394 .id = BUCK3,
466 /* no dvs for buck3, 4 */ in lp8788_init_dvs()
|
| D | da9052-regulator.c | 333 DA9052_DCDC(BUCK3, buck3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
350 DA9052_DCDC(BUCK3, buck3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
|
| D | mcp16502.c | 97 /* Ramp delay (uV/us) for buck2, buck3, buck4. */
137 BUCK3, enumerator
312 case BUCK3: in mcp16502_set_voltage_time_sel()
475 MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops,
|
| D | pv88080-regulator.c | 86 /* Current limits array (in uA) for BUCK1, BUCK2, BUCK3.
136 /* BUCK3 */
180 /* BUCK3 */
321 PV88080_BUCK(PV88080, BUCK3, 600000, 6250, 1393750,
|
| D | lp87565-regulator.c | 154 LP87565_REGULATOR("BUCK3", LP87565_BUCK_3, "buck3", lp87565_buck_ops,
|
| /Linux-v5.15/arch/arm64/boot/dts/freescale/ |
| D | imx8mn-ddr4-evk.dts | 81 buck3_reg: BUCK3 {
83 regulator-name = "buck3";
|
| D | imx8mq-pico-pi.dts | 99 buck3: BUCK3 { label
100 regulator-name = "buck3";
|
| D | imx8mq-phanbell.dts | 154 buck3: BUCK3 { label
155 regulator-name = "buck3";
|
