| /Linux-v6.1/Documentation/devicetree/bindings/mfd/ |
| D | samsung,s5m8767.yaml | 39 s5m8767,pmic-buck2-dvs-voltage:
44 A set of 8 voltage values in micro-volt (uV) units for buck2 when
70 s5m8767,pmic-buck2-uses-gpio-dvs:
72 description: buck2 can be controlled by gpio dvs.
102 description: Power supply for buck2
146 s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
149 …s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage…
158 - s5m8767,pmic-buck2-uses-gpio-dvs
169 s5m8767,pmic-buck2-uses-gpio-dvs: false
177 s5m8767,pmic-buck2-uses-gpio-dvs: false
[all …]
|
| D | max8998.txt | 29 - max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used
36 - max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from
47 Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
48 - max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
49 for buck2 regulator that can be selected using dvs gpio.
68 - Example: BUCK1, BUCK2, BUCK3, BUCK4
98 max8998,pmic-buck2-default-dvs-idx = <0>;
99 max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
100 max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;
|
| D | ti,lp87524-q1.yaml | 44 - buck2
60 - buck2-in-supply
81 buck2-in-supply = <&vdd_5v0>;
99 buck2_reg: buck2 {
100 regulator-name = "buck2";
|
| D | da9055.txt | 34 buck2 : regulator BUCK2
61 buck2: BUCK2 {
|
| D | mediatek,mt6360.yaml | 146 LDO_VIN3-supply = <&BUCK2>;
156 BUCK2: buck2 {
157 regulator-compatible = "BUCK2";
158 regulator-name = "mt6360,buck2";
|
| D | richtek,rt5120.yaml | 53 description: phandle for buck2 input power source
140 buck2 {
141 regulator-name = "rt5120-buck2";
|
| D | da9052-i2c.txt | 20 buck2 : regulator BUCK PRO
51 buck2 {
|
| D | rohm,bd71815-pmic.yaml | 128 buck2: buck2 {
129 regulator-name = "buck2";
|
| /Linux-v6.1/arch/arm64/boot/dts/freescale/ |
| D | imx8mp-icore-mx8mp.dtsi | 13 cpu-supply = <&buck2>;
17 cpu-supply = <&buck2>;
21 cpu-supply = <&buck2>;
25 cpu-supply = <&buck2>;
52 buck2: BUCK2 { label
59 regulator-name = "BUCK2";
|
| D | imx8mn-evk.dts | 18 cpu-supply = <&buck2>;
22 cpu-supply = <&buck2>;
26 cpu-supply = <&buck2>;
30 cpu-supply = <&buck2>;
52 buck2: BUCK2 { label
|
| D | imx8mp-phycore-som.dtsi | 26 cpu-supply = <&buck2>;
30 cpu-supply = <&buck2>;
34 cpu-supply = <&buck2>;
38 cpu-supply = <&buck2>;
110 buck2: BUCK2 { label
111 regulator-compatible = "BUCK2";
|
| D | imx8mq-phanbell.dts | 52 cpu-supply = <&buck2>;
56 cpu-supply = <&buck2>;
60 cpu-supply = <&buck2>;
64 cpu-supply = <&buck2>;
144 buck2: BUCK2 { label
145 regulator-name = "buck2";
|
| D | imx8mm-venice-gw7903.dts | 189 cpu-supply = <&buck2>;
193 cpu-supply = <&buck2>;
197 cpu-supply = <&buck2>;
201 cpu-supply = <&buck2>;
428 buck2: BUCK2 { label
429 regulator-name = "buck2";
|
| D | imx8mm-venice-gw7904.dts | 248 cpu-supply = <&buck2>;
252 cpu-supply = <&buck2>;
256 cpu-supply = <&buck2>;
260 cpu-supply = <&buck2>;
472 buck2: BUCK2 { label
473 regulator-name = "buck2";
|
| /Linux-v6.1/Documentation/devicetree/bindings/regulator/ |
| D | maxim,max8997.yaml | 45 max8997,pmic-buck2-dvs-voltage:
50 A set of 8 voltage values in micro-volt (uV) units for buck2 when
74 max8997,pmic-buck2-uses-gpio-dvs:
77 buck2 can be controlled by GPIO DVS.
248 - max8997,pmic-buck2-dvs-voltage
255 max8997,pmic-buck2-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
265 - max8997,pmic-buck2-uses-gpio-dvs
273 max8997,pmic-buck2-dvs-voltage:
297 max8997,pmic-buck2-uses-gpio-dvs;
312 max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
[all …]
|
| D | mt6360-regulator.yaml | 45 LDO_VIN3-supply = <&BUCK2>;
55 BUCK2: buck2 {
56 regulator-compatible = "BUCK2";
57 regulator-name = "mt6360,buck2";
|
| D | pv88080.txt | 17 BUCK1, BUCK2, BUCK3 and HVBUCK.
39 BUCK2 {
40 regulator-name = "buck2";
|
| D | pv88090.txt | 11 BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
34 BUCK2 {
35 regulator-name = "buck2";
|
| D | nxp,pca9450-regulator.yaml | 21 #BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
126 buck2: BUCK2 {
127 regulator-name = "BUCK2";
|
| D | richtek,rt5190a-regulator.yaml | 32 description: phandle to buck2 input voltage.
114 buck2 {
115 regulator-name = "rt5190a-buck2";
|
| D | lp872x.txt | 18 bit[4]: BUCK2 enable control. 1 = enable, 0 = disable
19 bit[3]: BUCK2 output voltage register address. 1 = 0Ah, 0 = 0Bh
153 vcc2: buck2 {
|
| /Linux-v6.1/drivers/regulator/ |
| D | lp8788-buck.c | 83 BUCK2, enumerator
155 case BUCK2: in lp8788_set_dvs()
172 case BUCK2: in lp8788_get_buck_dvs_ctrl_mode()
224 case BUCK2: in lp8788_select_buck_vout_addr()
381 .name = "buck2",
382 .id = BUCK2,
441 case BUCK2: in lp8788_dvs_gpio_request()
467 if (id > BUCK2) in lp8788_init_dvs()
475 (id == BUCK2 && !pdata->buck2_dvs)) in lp8788_init_dvs()
|
| D | tps65219-regulator.c | 54 { "BUCK2_SCG", "BUCK2", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
55 { "BUCK2_OC", "BUCK2", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
56 { "BUCK2_NEG_OC", "BUCK2", "negative overcurrent", REGULATOR_EVENT_OVER_CURRENT },
57 { "BUCK2_UV", "BUCK2", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
59 { "BUCK2_RV", "BUCK2", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
67 { "BUCK2_RV_SD", "BUCK2", "residual voltage on shutdown",
245 TPS65219_REGULATOR("BUCK2", "buck2", TPS65219_BUCK_2,
|
| D | tps65086-regulator.c | 17 enum tps65086_regulators { BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, LDOA1, enumerator
122 TPS65086_REGULATOR("BUCK2", "buck2", BUCK2, 0x80, TPS65086_BUCK2CTRL,
167 case BUCK2: in tps65086_of_parse_cb()
|
| /Linux-v6.1/include/linux/mfd/ |
| D | max8998.h | 67 * @buck2_voltage: BUCK2 DVS mode 2 voltage registers
71 * @buck2_set3: BUCK2 gpio pin to set output voltage
72 * @buck2_default_idx: Default for BUCK2 gpio pin.
|
