| /Linux-v5.10/drivers/soc/bcm/brcmstb/pm/ |
| D | aon_defs.h | 3 * Always ON (AON) register interface between bootloader and Linux
28 * Modification of this bit reserved for bootloader only.
34 * Modification of this bit reserved for bootloader only.
65 * Bootloader utilizes a custom parameter block left in DRAM for handling S3
69 /* scratch memory for bootloader */
92 * providing a large DRAM buffer to the bootloader
|
| /Linux-v5.10/arch/m68k/include/asm/ |
| D | bootstd.h | 2 /* bootstd.h: Bootloader system call interface
10 #define NR_BSC 21 /* last used bootloader system call */
12 #define __BN_reset 0 /* reset and start the bootloader */
14 #define __BN_exec 2 /* executes a bootloader image */
15 #define __BN_exit 3 /* terminates a bootloader image */
26 #define __BN_getbenv 14 /* get a bootloader envvar */
27 #define __BN_setbenv 15 /* get a bootloader envvar */
35 * We use similar macros to call into the bootloader as for uClinux
|
| /Linux-v5.10/Documentation/devicetree/bindings/power/reset/ |
| D | reboot-mode.yaml | 15 or ram. Then the bootloader can read it and take different
19 the bootloader what to do when the system reboots, and should be named
25 …- bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based devic…
26 - loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
46 mode-bootloader = <2>;
|
| /Linux-v5.10/arch/arm/mach-omap1/ |
| D | Kconfig | 35 Pin multiplexing support for OMAP boards. If your bootloader
48 bool "Warn about pins the bootloader didn't set up"
119 need a PalmOS compatible bootloader; check out
128 you'll need a PalmOS compatible bootloader; check out
137 need a PalmOS compatible bootloader (Garux); check out
147 you'll need a SX1 compatible bootloader; check out
|
| /Linux-v5.10/arch/alpha/boot/ |
| D | Makefile | 14 tools/bootpzh bootloader bootpheader bootpzheader
90 $(obj)/tools/lxboot: $(obj)/bootloader $(OBJSTRIP) FORCE
93 $(obj)/tools/bootlx: $(obj)/bootloader $(OBJSTRIP) FORCE
111 $(obj)/bootloader: $(obj)/bootloader.lds $(OBJ_bootlx) $(LIBS_Y) FORCE
114 $(obj)/bootpheader: $(obj)/bootloader.lds $(OBJ_bootph) $(LIBS_Y) FORCE
117 $(obj)/bootpzheader: $(obj)/bootloader.lds $(OBJ_bootpzh) $(LIBS_Y) FORCE
|
| /Linux-v5.10/Documentation/devicetree/bindings/input/touchscreen/ |
| D | cyttsp.txt | 9 - bootloader-key : the 8-byte bootloader key that is required to switch
10 the chip from bootloader mode (default mode) to
60 bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
85 bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
|
| /Linux-v5.10/drivers/platform/x86/ |
| D | intel-wmi-sbl-fw-update.c | 3 * Slim Bootloader(SBL) firmware update signaling driver
5 * Slim Bootloader is a small, open-source, non UEFI compliant, boot firmware
116 dev_info(&wdev->dev, "Slim Bootloader signaling driver attached\n"); in intel_wmi_sbl_fw_update_probe()
122 dev_info(&wdev->dev, "Slim Bootloader signaling driver removed\n"); in intel_wmi_sbl_fw_update_remove()
144 MODULE_DESCRIPTION("Slim Bootloader firmware update signaling driver");
|
| /Linux-v5.10/drivers/media/pci/saa7164/ |
| D | saa7164-fw.c | 261 "%s() Unknown bootloader flags 0x%x\n", in saa7164_downloadfirmware()
323 "%s() Unknown bootloader flags 0x%x\n", in saa7164_downloadfirmware()
434 /* Retrieve bootloader if reqd */ in saa7164_downloadfirmware()
436 /* Second bootloader in the firmware file */ in saa7164_downloadfirmware()
445 /* Get bootloader (if reqd) and firmware header */ in saa7164_downloadfirmware()
455 dprintk(DBGLVL_FW, "Onboard BootLoader:\n"); in saa7164_downloadfirmware()
468 dprintk(DBGLVL_FW, "BootLoader version in rom %d.%d.%d.%d\n", in saa7164_downloadfirmware()
474 dprintk(DBGLVL_FW, "BootLoader version in file %d.%d.%d.%d\n", in saa7164_downloadfirmware()
511 /* Get ready to upload the bootloader */ in saa7164_downloadfirmware()
519 dprintk(DBGLVL_FW, "bootloader d/l starts.\n"); in saa7164_downloadfirmware()
[all …]
|
| /Linux-v5.10/arch/arm/boot/dts/ |
| D | at91-sama5d27_som1.dtsi | 55 bootloader@00040000 {
56 label = "bootloader";
61 label = "bootloader env redundant";
66 label = "bootloader env";
|
| /Linux-v5.10/Documentation/devicetree/bindings/remoteproc/ |
| D | st-rproc.txt | 6 Co-processors can be controlled from the bootloader or the primary OS. If
7 the bootloader starts a co-processor, the primary OS must detect its state
18 - clock-frequency Clock frequency to set co-processor at if the bootloader
|
| /Linux-v5.10/arch/mips/cavium-octeon/ |
| D | octeon_boot.h | 24 /* similar to bootloader's linux_app_boot_info but without global data */
63 /* If not to copy a lot of bootloader's structures
67 /* hardcoded in bootloader */
|
| /Linux-v5.10/arch/powerpc/boot/dts/ |
| D | mpc8349emitxgp.dts | 34 timebase-frequency = <0>; // from bootloader
35 bus-frequency = <0>; // from bootloader
36 clock-frequency = <0>; // from bootloader
52 bus-frequency = <0>; // from bootloader
189 clock-frequency = <0>; // from bootloader
199 clock-frequency = <0>; // from bootloader
|
| D | tqm5200.dts | 29 timebase-frequency = <0>; // from bootloader
30 bus-frequency = <0>; // from bootloader
31 clock-frequency = <0>; // from bootloader
46 bus-frequency = <0>; // from bootloader
47 system-frequency = <0>; // from bootloader
|
| D | charon.dts | 32 timebase-frequency = <0>; // from bootloader
33 bus-frequency = <0>; // from bootloader
34 clock-frequency = <0>; // from bootloader
49 bus-frequency = <0>; // from bootloader
50 system-frequency = <0>; // from bootloader
|
| /Linux-v5.10/arch/arm/mach-s3c/ |
| D | sleep-s3c24xx.S | 22 * S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not
29 /* sleep magic, to allow the bootloader to check for an valid
38 * resume code entry for bootloader to call
|
| /Linux-v5.10/Documentation/x86/x86_64/ |
| D | uefi.rst | 10 the needed bootloader support and associated tools for x86_64 platforms
15 2. Booting Linux kernel on UEFI x86_64 platform requires bootloader
37 elilo bootloader with x86_64 support, elilo configuration file,
|
| /Linux-v5.10/arch/mips/include/asm/octeon/ |
| D | cvmx-sysinfo.h | 29 * This module provides system/board information obtained by the bootloader.
71 /* exception base address, as set by bootloader */
107 /* configuration flags from bootloader */
116 * by the bootloader.
|
| D | cvmx-bootmem.h | 52 * which is used to maintain the free memory list. Since the bootloader is
60 * bootloader, so this structure should not be changed
150 * passed to the application by the bootloader at a specific
176 * to the application by the bootloader, and assign it a name in the
191 * that was passed to the application by the bootloader, and assign it
211 * free list that was passed to the application by the bootloader, and
|
| /Linux-v5.10/drivers/memory/ |
| D | Kconfig | 119 Enables verbose debugging mostly to decode the bootloader provided
120 timings. To preserve the bootloader provided timings, the reset
124 NOTE: In addition to matching the register setup with the bootloader
126 bootloader or else the GPMC timings won't be identical with the
127 bootloader timings.
|
| /Linux-v5.10/drivers/hid/ |
| D | hid-picolcd.h | 41 #define REPORT_VERSION 0xf1 /* LCD: IN[2],OUT[1] Bootloader: IN[2],OUT[1] */
42 #define REPORT_BL_ERASE_MEMORY 0xf2 /* Bootloader: IN[36],OUT[4] */
43 #define REPORT_BL_READ_MEMORY 0xf3 /* Bootloader: IN[36],OUT[4] */
44 #define REPORT_BL_WRITE_MEMORY 0xf4 /* Bootloader: IN[36],OUT[36] */
45 #define REPORT_DEVID 0xf5 /* LCD: IN[5], OUT[1] Bootloader: IN[5],OUT[1] */
48 #define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */
|
| /Linux-v5.10/Documentation/translations/zh_CN/arm/ |
| D | Booting | 97 bootloader 必须创建和初始化内核标签列表。一个有效的标签列表以
106 bootloader 必须传递一个系统内存的位置和最小值，以及根文件系统位置。
125 bootloader 必须以 64bit 地址对齐的形式加载一个设备树映像(dtb)到系统
131 bootloader 必须传递一个系统内存的位置和最小值，以及根文件系统位置。
|
| /Linux-v5.10/arch/mips/netlogic/common/ |
| D | smpboot.S | 99 * In case of RMIboot bootloader which is used on XLR boards, the CPUs
100 * be already woken up and waiting in bootloader code.
101 * This will get them out of the bootloader code and into linux. Needed
102 * because the bootloader area will be taken and initialized by linux.
|
| /Linux-v5.10/arch/arm64/include/asm/ |
| D | virt.h | 56 * A correctly-implemented bootloader must start all CPUs in the same mode:
60 * Should the bootloader fail to do this, the two values will be different.
75 /* Check if the bootloader has booted CPUs in different modes */
|
| /Linux-v5.10/drivers/firmware/efi/ |
| D | Kconfig | 117 the bootloader this option may not be needed.
135 tristate "EFI Bootloader Control"
141 bootloader. If the string matches one of the boot labels
142 defined in its configuration, the bootloader will boot once
145 bootloader reads this reboot reason and takes particular
|
| /Linux-v5.10/arch/arm/mach-s5pv210/ |
| D | sleep.S | 17 * sleep magic, to allow the bootloader to check for an valid
27 * resume code entry for bootloader to call
|
