| /Linux-v5.15/arch/arm64/boot/dts/qcom/ |
| D | msm8996-sony-xperia-tone.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
14 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
16 /delete-node/ &slpi_region;
17 /delete-node/ &venus_region;
18 /delete-node/ &zap_shader_region;
21 qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */
22 qcom,pmic-id = <0x20009 0x2000a 0 0>; /* PM8994 + PMI8994 */
[all …]
|
| /Linux-v5.15/arch/arm/boot/dts/ |
| D | zynq-zc702.dts | 1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2011 - 2014 Xilinx
6 /dts-v1/;
7 #include "zynq-7000.dtsi"
11 compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
27 stdout-path = "serial0:115200n8";
30 gpio-keys {
31 compatible = "gpio-keys";
37 wakeup-source;
44 wakeup-source;
[all …]
|
| D | zynq-zc706.dts | 1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2011 - 2014 Xilinx
6 /dts-v1/;
7 #include "zynq-7000.dtsi"
11 compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
27 stdout-path = "serial0:115200n8";
31 compatible = "usb-nop-xceiv";
32 #phy-cells = <0>;
37 ps-clk-frequency = <33333333>;
42 phy-mode = "rgmii-id";
[all …]
|
| D | zynq-ebaz4205.dts | 1 // SPDX-License-Identifier: GPL-2.0
5 /dts-v1/;
6 /include/ "zynq-7000.dtsi"
10 compatible = "ebang,ebaz4205", "xlnx,zynq-7000";
23 stdout-path = "serial0:115200n8";
28 ps-clk-frequency = <33333333>;
29 fclk-enable = <8>;
34 phy-mode = "mii";
35 phy-handle = <&phy>;
38 assigned-clocks = <&clkc 18>;
[all …]
|
| D | zynq-microzed.dts | 1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2011 - 2014 Xilinx
6 /dts-v1/;
7 /include/ "zynq-7000.dtsi"
11 compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000";
25 stdout-path = "serial0:115200n8";
29 compatible = "usb-nop-xceiv";
30 #phy-cells = <0>;
35 ps-clk-frequency = <33333333>;
40 phy-mode = "rgmii-id";
[all …]
|
| D | qcom-apq8060-dragonboard.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
5 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
6 #include "qcom-msm8660.dtsi"
10 compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
17 stdout-path = "serial0:115200n8";
21 compatible = "simple-bus";
24 vph: regulator-fixed {
[all …]
|
| D | tegra124-nyan.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/input/input.h>
13 stdout-path = "serial0:115200n8";
19 * missing a unit-address. However, the bootloader on these Chromebook
21 * Adding the unit-address causes the bootloader to create a /memory
33 /delete-node/ memory@80000000;
39 vdd-supply = <&vdd_3v3_hdmi>;
40 pll-supply = <&vdd_hdmi_pll>;
41 hdmi-supply = <&vdd_5v0_hdmi>;
43 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
[all …]
|
| D | tegra124-venice2.dts | 1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/input/input.h>
18 stdout-path = "serial0:115200n8";
29 vdd-supply = <&vdd_3v3_hdmi>;
30 pll-supply = <&vdd_hdmi_pll>;
31 hdmi-supply = <&vdd_5v0_hdmi>;
33 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
34 nvidia,hpd-gpio =
41 avdd-io-hdmi-dp-supply = <&vdd_1v05_run>;
[all …]
|
| /Linux-v5.15/Documentation/devicetree/bindings/pinctrl/ |
| D | pincfg-node.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/pincfg-node.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Linus Walleij <linus.walleij@linaro.org>
21 bias-disable:
23 description: disable any pin bias
25 bias-high-impedance:
27 description: high impedance mode ("third-state", "floating")
29 bias-bus-hold:
[all …]
|
| D | xlnx,zynq-pinctrl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/xlnx,zynq-pinctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
13 Please refer to pinctrl-bindings.txt in this directory for details of the
21 parameters, such as pull-up, slew rate, etc.
31 const: xlnx,zynq-pinctrl
42 '^(.*-)?(default|gpio)$':
50 $ref: pinmux-node.yaml#
[all …]
|
| D | img,pistachio-pinctrl.txt | 8 each. The GPIO banks are represented as sub-nodes of the pad controller node.
10 Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and
11 ../interrupt-controller/interrupts.txt for generic information regarding
15 --------------------------------------------
16 - compatible: "img,pistachio-system-pinctrl".
17 - reg: Address range of the pinctrl registers.
19 Required properties for GPIO bank sub-nodes:
20 --------------------------------------------
21 - interrupts: Interrupt line for the GPIO bank.
22 - gpio-controller: Indicates the device is a GPIO controller.
[all …]
|
| D | actions,s900-pinctrl.txt | 7 - compatible: Should be "actions,s900-pinctrl"
8 - reg: Should contain the register base address and size of
10 - clocks: phandle of the clock feeding the pin controller
11 - gpio-controller: Marks the device node as a GPIO controller.
12 - gpio-ranges: Specifies the mapping between gpio controller and
13 pin-controller pins.
14 - #gpio-cells: Should be two. The first cell is the gpio pin number
16 - interrupt-controller: Marks the device node as an interrupt controller.
17 - #interrupt-cells: Specifies the number of cells needed to encode an
21 bindings/interrupt-controller/interrupts.txt
[all …]
|
| D | renesas,rzn1-pinctrl.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/renesas,rzn1-pinctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Gareth Williams <gareth.williams.jx@renesas.com>
11 - Geert Uytterhoeven <geert+renesas@glider.be>
16 - enum:
17 - renesas,r9a06g032-pinctrl # RZ/N1D
18 - renesas,r9a06g033-pinctrl # RZ/N1S
19 - const: renesas,rzn1-pinctrl # Generic RZ/N1
[all …]
|
| D | qcom,pmic-mpp.txt | 1 Qualcomm PMIC Multi-Purpose Pin (MPP) block
6 - compatible:
10 "qcom,pm8018-mpp",
11 "qcom,pm8019-mpp",
12 "qcom,pm8038-mpp",
13 "qcom,pm8058-mpp",
14 "qcom,pm8821-mpp",
15 "qcom,pm8841-mpp",
16 "qcom,pm8916-mpp",
17 "qcom,pm8917-mpp",
[all …]
|
| D | qcom,pmic-gpio.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Bjorn Andersson <bjorn.andersson@linaro.org>
19 - enum:
20 - qcom,pm660-gpio
21 - qcom,pm660l-gpio
22 - qcom,pm6150-gpio
23 - qcom,pm6150l-gpio
[all …]
|
| D | xlnx,zynqmp-pinctrl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
11 - Rajan Vaja <rajan.vaja@xilinx.com>
14 Please refer to pinctrl-bindings.txt in this directory for details of the
22 parameters, such as pull-up, slew rate, etc.
32 const: xlnx,zynqmp-pinctrl
35 '^(.*-)?(default|gpio)$':
[all …]
|
| /Linux-v5.15/drivers/pinctrl/ |
| D | pinconf-generic.c | 1 // SPDX-License-Identifier: GPL-2.0-only
5 * Copyright (C) 2011 ST-Ericsson SA
6 * Written on behalf of Linaro for ST-Ericsson
22 #include <linux/pinctrl/pinconf-generic.h>
26 #include "pinctrl-utils.h"
30 PCONFDUMP(PIN_CONFIG_BIAS_BUS_HOLD, "input bias bus hold", NULL, false),
31 PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL, false),
32 PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL, false),
33 PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", NULL, false),
35 "input bias pull to pin specific state", NULL, false),
[all …]
|
| /Linux-v5.15/include/linux/pinctrl/ |
| D | pinconf-generic.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */
5 * Copyright (C) 2011 ST-Ericsson SA
6 * Written on behalf of Linaro for ST-Ericsson
21 * enum pin_config_param - possible pin configuration parameters
25 * bus to change the value by driving the bus high or low and switching to
27 * @PIN_CONFIG_BIAS_DISABLE: disable any pin bias on the pin, a
28 * transition from say pull-up to pull-down implies that you disable
29 * pull-up in the process, this setting disables all biasing.
30 * @PIN_CONFIG_BIAS_HIGH_IMPEDANCE: the pin will be set to a high impedance
31 * mode, also know as "third-state" (tristate) or "high-Z" or "floating".
[all …]
|
| /Linux-v5.15/drivers/acpi/acpica/ |
| D | utresdecode.c | 1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
4 * Module Name: utresdecode - Resource descriptor keyword strings
28 "0 - Good Configuration",
29 "1 - Acceptable Configuration",
30 "2 - Suboptimal Configuration",
31 "3 - ***Invalid Configuration***",
272 "Bias Pull-up",
273 "Bias Pull-down",
274 "Bias Default",
275 "Bias Disable",
[all …]
|
| /Linux-v5.15/Documentation/devicetree/bindings/mfd/ |
| D | as3722.txt | 4 -------------------
5 - compatible: Must be "ams,as3722".
6 - reg: I2C device address.
7 - interrupt-controller: AS3722 has internal interrupt controller which takes the
8 interrupt request from internal sub-blocks like RTC, regulators, GPIOs as well
10 - #interrupt-cells: Should be set to 2 for IRQ number and flags.
12 of AS3722 are defined at dt-bindings/mfd/as3722.h
14 interrupts.txt, using dt-bindings/irq.
17 --------------------
18 - ams,enable-internal-int-pullup: Boolean property, to enable internal pullup on
[all …]
|
| /Linux-v5.15/sound/soc/codecs/ |
| D | nau8825.c | 1 // SPDX-License-Identifier: GPL-2.0-only
8 * Co-author: Meng-Huang Kuo <mhkuo@nuvoton.com>
34 #define NUVOTON_CODEC_DAI "nau8825-hifi"
238 * nau8825_sema_acquire - acquire the semaphore of nau88l25
248 * this function returns -ETIME. If the sleep is interrupted by a signal,
249 * this function will return -EINTR. It returns 0 if the semaphore was
261 ret = down_timeout(&nau8825->xtalk_sem, timeout); in nau8825_sema_acquire()
263 dev_warn(nau8825->dev, "Acquire semaphore timeout\n"); in nau8825_sema_acquire()
265 ret = down_trylock(&nau8825->xtalk_sem); in nau8825_sema_acquire()
267 dev_warn(nau8825->dev, "Acquire semaphore fail\n"); in nau8825_sema_acquire()
[all …]
|
| D | arizona-jack.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * extcon-arizona.c - Extcon driver Wolfson Arizona devices
5 * Copyright (C) 2012-2014 Wolfson Microelectronics plc
26 #include <dt-bindings/mfd/arizona.h>
33 * The hardware supports 8 ranges / buttons, but the snd-jack interface
34 * only supports 6 buttons (button 0-5).
100 struct arizona *arizona = info->arizona; in arizona_extcon_hp_clamp()
105 switch (arizona->type) { in arizona_extcon_hp_clamp()
122 ret = regmap_update_bits(arizona->regmap, in arizona_extcon_hp_clamp()
127 dev_warn(arizona->dev, "Failed to set TST_CAP_SEL: %d\n", ret); in arizona_extcon_hp_clamp()
[all …]
|
| D | tlv320aic3x.c | 1 // SPDX-License-Identifier: GPL-2.0-only
16 * ---------------------------------------
17 * MONO_LOUT -> N/A | MONO_LOUT -> N/A
18 * | IN1L -> LINE1L
19 * | IN1R -> LINE1R
20 * | IN2L -> LINE2L
21 * | IN2R -> LINE2R
22 * | MIC3L/R -> N/A
25 * ---------------------------------------
88 /* Output Common-Mode Voltage */
[all …]
|
| /Linux-v5.15/drivers/iio/magnetometer/ |
| D | hmc5843_core.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Device driver for the the HMC5843 multi-chip module designed
11 * Split to multiple files by Josef Gajdusek <atx@atx.name> - 2014
26 * Range gain settings in (+-)Ga
28 * ranges; default corresponds to +-1.0 Ga and +-1.3 Ga, respectively
61 * Normal, Positive bias and Negative bias
64 * 0 - Normal measurement configuration (default): In normal measurement
66 * and BN are left floating and high impedance.
68 * 1 - Positive bias configuration: In positive bias configuration, a
72 * 2 - Negative bias configuration. In negative bias configuration, a
[all …]
|
| /Linux-v5.15/arch/arm64/boot/dts/nvidia/ |
| D | tegra132-norrin.dts | 1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/input/input.h>
18 stdout-path = "serial0:115200n8";
30 vdd-supply = <&vdd_3v3_hdmi>;
31 pll-supply = <&vdd_hdmi_pll>;
32 hdmi-supply = <&vdd_5v0_hdmi>;
34 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
35 nvidia,hpd-gpio =
42 avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
[all …]
|
