| /Linux-v6.1/Documentation/devicetree/bindings/media/i2c/ |
| D | adv7180.yaml | 4 $id: http://devicetree.org/schemas/media/i2c/adv7180.yaml#
7 title: Analog Devices ADV7180 analog video decoder family
13 The adv7180 family devices are used to capture analog video to different
20 - adi,adv7180
68 - adi,adv7180
138 compatible = "adi,adv7180";
142 adv7180: endpoint {
|
| /Linux-v6.1/Documentation/admin-guide/media/ |
| D | imx.rst | 116 the SabreAuto has only the ADV7180 decoder on a parallel bt.656 bus, and
463 i.MX6Q SabreAuto with ADV7180 decoder
466 On the i.MX6Q SabreAuto, an on-board ADV7180 SD decoder is connected to the
469 The following example configures a pipeline to capture from the ADV7180
471 interweave (unconverted and without motion compensation). The adv7180
478 media-ctl -l "'adv7180 3-0021':0 -> 'ipu1_csi0_mux':1[1]"
482 media-ctl -V "'adv7180 3-0021':0 [fmt:UYVY2X8/720x480 field:seq-bt]"
491 This example configures a pipeline to capture from the ADV7180
493 Compensated de-interlacing. The adv7180 must output sequential or
499 media-ctl -l "'adv7180 3-0021':0 -> 'ipu1_csi0_mux':1[1]"
[all …]
|
| D | imx6q-sabreauto.dot | 49 …n00000081 [label="{{} | adv7180 3-0021\n/dev/v4l-subdev14 | {<port0> 0}}", shape=Mrecord, style=fi…
|
| D | i2c-cardlist.rst | 196 adv7180 Analog Devices ADV7180 decoder
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | imx6dl-gw52xx.dts | 16 adv7180: camera@20 { label
17 compatible = "adi,adv7180";
|
| D | imx6dl-gw53xx.dts | 16 adv7180: camera@20 { label
17 compatible = "adi,adv7180";
|
| D | imx6dl-gw54xx.dts | 16 adv7180: camera@20 { label
17 compatible = "adi,adv7180";
|
| D | imx6q-gw52xx.dts | 16 adv7180: camera@20 { label
17 compatible = "adi,adv7180";
|
| D | imx6q-gw53xx.dts | 16 adv7180: camera@20 { label
17 compatible = "adi,adv7180";
|
| D | imx6q-gw54xx.dts | 33 adv7180: camera@20 { label
34 compatible = "adi,adv7180";
|
| D | r8a7791-porter.dts | 165 compatible = "adi,adv7180";
169 adv7180: endpoint { label
427 remote-endpoint = <&adv7180>;
|
| D | r8a7794-alt.dts | 208 compatible = "adi,adv7180";
212 adv7180: endpoint { label
479 remote-endpoint = <&adv7180>;
|
| D | r8a7794-silk.dts | 242 compatible = "adi,adv7180";
246 adv7180: endpoint { label
510 remote-endpoint = <&adv7180>;
|
| D | r8a7790-lager.dts | 350 compatible = "adi,adv7180";
354 adv7180: endpoint { label
917 remote-endpoint = <&adv7180>;
|
| D | r8a7791-koelsch.dts | 373 compatible = "adi,adv7180";
377 adv7180: endpoint { label
887 remote-endpoint = <&adv7180>;
|
| D | imx6qdl-gw51xx.dtsi | 367 adv7180: camera@20 { label
368 compatible = "adi,adv7180";
|
| D | imx6qdl-gw553x.dtsi | 422 adv7180: camera@20 { label
423 compatible = "adi,adv7180";
|
| D | imx6qdl-sabreauto.dtsi | 177 adv7180: camera@21 { label
178 compatible = "adi,adv7180";
|
| /Linux-v6.1/Documentation/devicetree/bindings/i2c/ |
| D | i2c-demux-pinctrl.txt | 54 compatible = "adi,adv7180";
59 adv7180: endpoint {
|
| /Linux-v6.1/Documentation/i2c/busses/ |
| D | i2c-ocores.rst | 51 I2C_BOARD_INFO("adv7180", 0x42 >> 1),
|
| /Linux-v6.1/drivers/media/i2c/ |
| D | adv7180.c | 3 * adv7180.c Analog Devices ADV7180 video decoder driver
838 * The ADV7180 sensor supports BT.601/656 output modes. in adv7180_get_mbus_config()
1540 { "adv7180", (kernel_ulong_t)&adv7180_info },
1590 { .compatible = "adi,adv7180", },
1620 MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver");
|
| D | Makefile | 11 obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
|
| D | Kconfig | 1078 tristate "Analog Devices ADV7180 decoder"
1084 Support for the Analog Devices ADV7180 video decoder.
1087 module will be called adv7180.
|
| /Linux-v6.1/drivers/media/pci/sta2x11/ |
| D | sta2x11_vip.c | 866 * from ADV7180 in sta2x11_vip_init_controls()
1072 /* Get ADV7180 subdevice */ in sta2x11_vip_init_one()
1081 "adv7180", vip->config->i2c_addr, in sta2x11_vip_init_one()
|
| /Linux-v6.1/Documentation/devicetree/bindings/media/ |
| D | renesas,vin.yaml | 272 remote-endpoint = <&adv7180>;
|
