| /Linux-v6.1/Documentation/devicetree/bindings/iio/adc/ |
| D | st,stm32-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
5 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
7 title: STMicroelectronics STM32 ADC bindings
10 STM32 ADC is a successive approximation analog-to-digital converter.
11 It has several multiplexed input channels. Conversions can be performed
12 in single, continuous, scan or discontinuous mode. Result of the ADC is
13 stored in a left-aligned or right-aligned 32-bit data register.
17 voltage goes beyond the user-defined, higher or lower thresholds.
[all …]
|
| D | st,stm32-dfsdm-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: STMicroelectronics STM32 DFSDM ADC device driver
10 - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
11 - Olivier Moysan <olivier.moysan@foss.st.com>
14 STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
17 - Sigma delta modulators (motor control, metering...)
18 - PDM microphones (audio digital microphone)
[all …]
|
| D | ti,am3359-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/ti,am3359-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: TI AM3359 ADC
10 - Miquel Raynal <miquel.raynal@bootlin.com>
15 - enum:
16 - ti,am3359-adc
17 - ti,am4372-adc
18 - items:
[all …]
|
| D | cosmic,10001-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/cosmic,10001-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Cosmic Circuits CC-10001 ADC
10 - Jonathan Cameron <jic23@kernel.org>
13 Cosmic Circuits 10001 10-bit ADC device.
17 const: cosmic,10001-adc
22 adc-reserved-channels:
25 Bitmask of reserved channels, i.e. channels that cannot be
[all …]
|
| D | atmel,sama9260-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/atmel,sama9260-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: AT91 sama9260 and similar Analog to Digital Converter (ADC)
10 - Alexandre Belloni <alexandre.belloni@bootlin.com>
15 - atmel,at91sam9260-adc
16 - atmel,at91sam9rl-adc
17 - atmel,at91sam9g45-adc
18 - atmel,at91sam9x5-adc
[all …]
|
| D | adi,ad7124.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/iio/adc/adi,ad7124.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Analog Devices AD7124 ADC device driver
11 - Stefan Popa <stefan.popa@analog.com>
14 Bindings for the Analog Devices AD7124 ADC device. Datasheet can be
16 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf
21 - adi,ad7124-4
22 - adi,ad7124-8
[all …]
|
| D | aspeed,ast2600-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: ADC that forms part of an ASPEED server management processor.
10 - Billy Tsai <billy_tsai@aspeedtech.com>
13 • 10-bits resolution for 16 voltage channels.
15 channels.
16 • Channel scanning can be non-continuous.
17 • Programmable ADC clock frequency.
[all …]
|
| D | qcom,spmi-vadc.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm's SPMI PMIC ADC
10 - Andy Gross <agross@kernel.org>
11 - Bjorn Andersson <bjorn.andersson@linaro.org>
14 SPMI PMIC voltage ADC (VADC) provides interface to clients to read
15 voltage. The VADC is a 15-bit sigma-delta ADC.
16 SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read
[all …]
|
| /Linux-v6.1/drivers/iio/adc/ |
| D | mcp320x.c | 1 // SPDX-License-Identifier: GPL-2.0-only
8 * Driver for following ADC chips from Microchip Technology's:
14 * ------------
20 * ------------
23 * ------------
65 const struct iio_chan_spec *channels; member
72 * struct mcp320x - Microchip SPI ADC instance
74 * @msg: SPI message to select a channel and receive a value from the ADC
80 * @chip_info: ADC properties
81 * @tx_buf: buffer for @transfer[0] (not used on single-channel converters)
[all …]
|
| D | stm32-adc.c | 1 // SPDX-License-Identifier: GPL-2.0
3 * This file is part of STM32 ADC driver
5 * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
11 #include <linux/dma-mapping.h>
15 #include <linux/iio/timer/stm32-lptim-trigger.h>
16 #include <linux/iio/timer/stm32-timer-trigger.h>
25 #include <linux/nvmem-consumer.h>
30 #include "stm32-adc-core.h"
35 /* BOOST bit must be set on STM32H7 when ADC clock is above 20MHz */
38 #define STM32_ADC_CH_MAX 20 /* max number of channels */
[all …]
|
| D | qcom-pm8xxx-xoadc.c | 1 // SPDX-License-Identifier: GPL-2.0-only
7 * specific-purpose and general purpose ADC converters and channels.
13 #include <linux/iio/adc/qcom-vadc-common.h>
27 * Qualcomm tree. Their kernel has two out-of-tree drivers for the ADC:
28 * drivers/misc/pmic8058-xoadc.c
29 * drivers/hwmon/pm8xxx-adc.c
57 /* Proper ADC registers */
99 * On a later ADC the decimation factors are defined as
123 * Physical channels which MUST exist on all PM variants in order to provide
155 * struct xoadc_channel - encodes channel properties and defaults
[all …]
|
| D | ti-adc084s021.c | 1 // SPDX-License-Identifier: GPL-2.0-only
5 * Driver for Texas Instruments' ADC084S021 ADC chip.
31 __be16 channels[4]; member
39 __be16 rx_buf[5]; /* First 16-bits are trash */
68 * adc084s021_adc_conversion() - Read an ADC channel and return its value.
70 * @adc: The ADC SPI data.
73 static int adc084s021_adc_conversion(struct adc084s021 *adc, __be16 *data) in adc084s021_adc_conversion() argument
75 int n_words = (adc->spi_trans.len >> 1) - 1; /* Discard first word */ in adc084s021_adc_conversion()
79 ret = spi_sync(adc->spi, &adc->message); in adc084s021_adc_conversion()
84 *(data + i) = adc->rx_buf[i + 1]; in adc084s021_adc_conversion()
[all …]
|
| D | ti-adc0832.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * ADC0831/ADC0832/ADC0834/ADC0838 8-bit ADC driver
7 * Datasheet: https://www.ti.com/lit/ds/symlink/adc0832-n.pdf
33 * Max size needed: 16x 1 byte ADC data + 8 bytes timestamp
34 * May be shorter if not all channels are enabled subject
120 static int adc0831_adc_conversion(struct adc0832 *adc) in adc0831_adc_conversion() argument
122 struct spi_device *spi = adc->spi; in adc0831_adc_conversion()
125 ret = spi_read(spi, &adc->rx_buf, 2); in adc0831_adc_conversion()
130 * Skip TRI-STATE and a leading zero in adc0831_adc_conversion()
132 return (adc->rx_buf[0] << 2 & 0xff) | (adc->rx_buf[1] >> 6); in adc0831_adc_conversion()
[all …]
|
| D | ti_am335x_adc.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * TI ADC MFD driver
5 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
27 #include <linux/dma-mapping.h>
46 int channels; member
55 static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg) in tiadc_readl() argument
57 return readl(adc->mfd_tscadc->tscadc_base + reg); in tiadc_readl()
60 static void tiadc_writel(struct tiadc_device *adc, unsigned int reg, in tiadc_writel() argument
63 writel(val, adc->mfd_tscadc->tscadc_base + reg); in tiadc_writel()
70 step_en = ((1 << adc_dev->channels) - 1); in get_adc_step_mask()
[all …]
|
| D | stm32-dfsdm-adc.c | 1 // SPDX-License-Identifier: GPL-2.0
3 * This file is the ADC part of the STM32 DFSDM driver
5 * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
10 #include <linux/dma-mapping.h>
11 #include <linux/iio/adc/stm32-dfsdm-adc.h>
13 #include <linux/iio/hw-consumer.h>
15 #include <linux/iio/timer/stm32-lptim-trigger.h>
16 #include <linux/iio/timer/stm32-timer-trigger.h>
27 #include "stm32-dfsdm.h"
42 /* Limit filter output resolution to 31 bits. (i.e. sample range is +/-2^30) */
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/input/touchscreen/ |
| D | resistive-adc-touch.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Generic resistive touchscreen ADC
10 - Oleksij Rempel <o.rempel@pengutronix.de>
13 Generic ADC based resistive touchscreen controller
14 The device must be connected to an ADC device that provides channels for
18 - $ref: touchscreen.yaml#
22 const: resistive-adc-touch
[all …]
|
| /Linux-v6.1/drivers/hwmon/ |
| D | adcxx.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
11 * ADC<bb><c>S<sss>, where
13 * * c is the number of channels (1, 2, 4, 8)
18 * http://www.national.com/ds/DC/ADC<bb><c>S<sss>.pdf
32 #include <linux/hwmon-sysfs.h>
42 u32 channels; member
52 struct adcxx *adc = spi_get_drvdata(spi); in adcxx_show() local
58 if (mutex_lock_interruptible(&adc->lock)) in adcxx_show()
59 return -ERESTARTSYS; in adcxx_show()
61 if (adc->channels == 1) { in adcxx_show()
[all …]
|
| /Linux-v6.1/drivers/thermal/qcom/ |
| D | qcom-spmi-adc-tm5.c | 1 // SPDX-License-Identifier: GPL-2.0-only
6 * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
12 #include <linux/iio/adc/qcom-vadc-common.h>
21 #include <asm-generic/unaligned.h>
26 * Thermal monitoring block consists of 8 (ADC_TM5_NUM_CHANNELS) channels. Each
27 * channel is programmed to use one of ADC channels for voltage comparison.
28 * Voltages are programmed using ADC codes, so we have to convert temp to
29 * voltage and then to ADC code value.
31 * Configuration of TM channels must match configuration of corresponding ADC
32 * channels.
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/input/ |
| D | adc-joystick.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2 # Copyright 2019-2020 Artur Rojek
4 ---
5 $id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
6 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
8 title: ADC attached joystick
11 - Artur Rojek <contact@artur-rojek.eu>
14 Bindings for joystick devices connected to ADC controllers supporting
18 - $ref: input.yaml#
22 const: adc-joystick
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/thermal/ |
| D | qcom-spmi-adc-tm5.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm5.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
9 - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
14 - qcom,spmi-adc-tm5
15 - qcom,spmi-adc-tm5-gen2
23 "#thermal-sensor-cells":
29 "#address-cells":
[all …]
|
| D | qcom-spmi-adc-tm-hc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring
9 - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
13 const: qcom,spmi-adc-tm-hc
21 "#thermal-sensor-cells":
27 "#address-cells":
30 "#size-cells":
[all …]
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | cros-adc-thermistors.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only
4 * children of the IIO based ADC.
12 &adc {
15 pullup-uv = <1800000>;
16 pullup-ohm = <47000>;
17 pulldown-ohm = <0>;
18 io-channels = <&adc 3>;
22 pullup-uv = <1800000>;
23 pullup-ohm = <47000>;
24 pulldown-ohm = <0>;
[all …]
|
| D | aspeed-bmc-ampere-mtjade.dts | 1 // SPDX-License-Identifier: GPL-2.0+
2 /dts-v1/;
3 #include "aspeed-g5.dtsi"
4 #include <dt-bindings/gpio/aspeed-gpio.h>
8 compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
12 * i2c bus 50-57 assigned to NVMe slot 0-7
24 * i2c bus 60-67 assigned to NVMe slot 8-15
36 * i2c bus 70-77 assigned to NVMe slot 16-23
48 * i2c bus 80-81 assigned to NVMe M2 slot 0-1
55 stdout-path = &uart5;
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/hwmon/ |
| D | iio-hwmon.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: "http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#"
5 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
7 title: ADC-attached Hardware Sensor
10 - Jonathan Cameron <jic23@kernel.org>
13 Bindings for hardware monitoring devices connected to ADC controllers
18 const: iio-hwmon
20 io-channels:
24 List of phandles to ADC channels to read the monitoring values
[all …]
|
| /Linux-v6.1/Documentation/hwmon/ |
| D | da9055.rst | 14 -----------
16 The DA9055 provides an Analogue to Digital Converter (ADC) with 10 bits
20 the input of the ADC during the conversion.
22 The ADC is used to measure the following inputs:
24 - Channel 0: VDDOUT - measurement of the system voltage
25 - Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
26 - Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
27 - Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
28 - Channel 4: Internal Tjunc. - sense (internal temp. sensor)
31 chip junction temperature and auxiliary channels voltages.
[all …]
|
