| /Linux-v5.10/Documentation/devicetree/bindings/arm/ |
| D | xilinx.yaml | 46 - xlnx,zynqmp-zc1751
47 - const: xlnx,zynqmp
51 - const: xlnx,zynqmp-zc1232-revA
52 - const: xlnx,zynqmp-zc1232
53 - const: xlnx,zynqmp
57 - const: xlnx,zynqmp-zc1254-revA
58 - const: xlnx,zynqmp-zc1254
59 - const: xlnx,zynqmp
63 - const: xlnx,zynqmp-zc1275-revA
64 - const: xlnx,zynqmp-zc1275
[all …]
|
| /Linux-v5.10/arch/arm64/boot/dts/xilinx/ |
| D | Makefile | 3 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
4 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
5 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb
6 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm015-dc1.dtb
7 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm016-dc2.dtb
8 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm017-dc3.dtb
9 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm018-dc4.dtb
10 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm019-dc5.dtb
11 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb
12 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb
[all …]
|
| D | zynqmp-zc1254-revA.dts | 3 * dts file for Xilinx ZynqMP ZC1254
13 #include "zynqmp.dtsi"
14 #include "zynqmp-clk-ccf.dtsi"
17 model = "ZynqMP ZC1254 RevA";
18 compatible = "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254", "xlnx,zynqmp";
|
| D | zynqmp-zc1275-revA.dts | 3 * dts file for Xilinx ZynqMP ZC1275
13 #include "zynqmp.dtsi"
14 #include "zynqmp-clk-ccf.dtsi"
17 model = "ZynqMP ZC1275 RevA";
18 compatible = "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275", "xlnx,zynqmp";
|
| D | zynqmp.dtsi | 3 * dts file for Xilinx ZynqMP
15 #include <dt-bindings/power/xlnx-zynqmp-power.h>
16 #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
19 compatible = "xlnx,zynqmp";
122 zynqmp_firmware: zynqmp-firmware {
123 compatible = "xlnx,zynqmp-firmware";
127 zynqmp_power: zynqmp-power {
128 compatible = "xlnx,zynqmp-power";
135 compatible = "xlnx,zynqmp-clk";
149 compatible = "xlnx,zynqmp-nvmem-fw";
[all …]
|
| D | zynqmp-zc1232-revA.dts | 3 * dts file for Xilinx ZynqMP ZC1232
12 #include "zynqmp.dtsi"
13 #include "zynqmp-clk-ccf.dtsi"
16 model = "ZynqMP ZC1232 RevA";
17 compatible = "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232", "xlnx,zynqmp";
|
| D | zynqmp-zcu102-rev1.0.dts | 3 * dts file for Xilinx ZynqMP ZCU102 Rev1.0
10 #include "zynqmp-zcu102-revB.dts"
13 model = "ZynqMP ZCU102 Rev1.0";
14 compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
|
| D | zynqmp-zcu102-revB.dts | 3 * dts file for Xilinx ZynqMP ZCU102 RevB
10 #include "zynqmp-zcu102-revA.dts"
13 model = "ZynqMP ZCU102 RevB";
14 compatible = "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
|
| D | zynqmp-zc1751-xm019-dc5.dts | 3 * dts file for Xilinx ZynqMP zc1751-xm019-dc5
13 #include "zynqmp.dtsi"
14 #include "zynqmp-clk-ccf.dtsi"
18 model = "ZynqMP zc1751-xm019-dc5 RevA";
19 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
|
| D | avnet-ultra96-rev1.dts | 12 #include "zynqmp-zcu100-revC.dts"
17 "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100",
18 "xlnx,zynqmp";
|
| D | zynqmp-zc1751-xm015-dc1.dts | 3 * dts file for Xilinx ZynqMP zc1751-xm015-dc1
12 #include "zynqmp.dtsi"
13 #include "zynqmp-clk-ccf.dtsi"
17 model = "ZynqMP zc1751-xm015-dc1 RevA";
18 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
|
| D | zynqmp-zc1751-xm018-dc4.dts | 3 * dts file for Xilinx ZynqMP zc1751-xm018-dc4
12 #include "zynqmp.dtsi"
13 #include "zynqmp-clk-ccf.dtsi"
16 model = "ZynqMP zc1751-xm018-dc4";
17 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
|
| D | zynqmp-zc1751-xm016-dc2.dts | 3 * dts file for Xilinx ZynqMP zc1751-xm016-dc2
12 #include "zynqmp.dtsi"
13 #include "zynqmp-clk-ccf.dtsi"
17 model = "ZynqMP zc1751-xm016-dc2 RevA";
18 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
|
| D | zynqmp-zc1751-xm017-dc3.dts | 3 * dts file for Xilinx ZynqMP zc1751-xm017-dc3
12 #include "zynqmp.dtsi"
13 #include "zynqmp-clk-ccf.dtsi"
16 model = "ZynqMP zc1751-xm017-dc3 RevA";
17 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
|
| /Linux-v5.10/Documentation/ABI/stable/ |
| D | sysfs-driver-firmware-zynqmp | 1 What: /sys/devices/platform/firmware\:zynqmp-firmware/ggs*
17 # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
18 # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
22 # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
23 # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
27 What: /sys/devices/platform/firmware\:zynqmp-firmware/pggs*
46 # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
47 # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
51 # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
52 # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/power/reset/ |
| D | xlnx,zynqmp-power.txt | 4 The zynqmp-power node describes the power management configurations.
8 - compatible: Must contain: "xlnx,zynqmp-power"
24 xlnx,zynqmp-ipi-mailbox.txt for typical controller that
34 zynqmp_firmware: zynqmp-firmware {
35 compatible = "xlnx,zynqmp-firmware";
38 zynqmp_power: zynqmp-power {
39 compatible = "xlnx,zynqmp-power";
48 zynqmp_firmware: zynqmp-firmware {
49 compatible = "xlnx,zynqmp-firmware";
52 zynqmp_power: zynqmp-power {
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/crypto/ |
| D | xlnx,zynqmp-aes.yaml | 4 $id: http://devicetree.org/schemas/crypto/xlnx,zynqmp-aes.yaml#
7 title: Xilinx ZynqMP AES-GCM Hardware Accelerator Device Tree Bindings
14 The ZynqMP AES-GCM hardened cryptographic accelerator is used to
19 const: xlnx,zynqmp-aes
29 zynqmp_firmware: zynqmp-firmware {
30 compatible = "xlnx,zynqmp-firmware";
32 xlnx_aes: zynqmp-aes {
33 compatible = "xlnx,zynqmp-aes";
|
| /Linux-v5.10/Documentation/devicetree/bindings/phy/ |
| D | xlnx,zynqmp-psgtr.yaml | 4 $id: http://devicetree.org/schemas/phy/xlnx,zynqmp-psgtr.yaml#
7 title: Xilinx ZynqMP Gigabit Transceiver PHY Device Tree Bindings
13 This binding describes the Xilinx ZynqMP Gigabit Transceiver (GTR) PHY. The
43 - xlnx,zynqmp-psgtr-v1.1
44 - xlnx,zynqmp-psgtr
85 const: xlnx,zynqmp-psgtr-v1.1
96 compatible = "xlnx,zynqmp-psgtr-v1.1";
|
| /Linux-v5.10/Documentation/devicetree/bindings/fpga/ |
| D | xlnx,zynqmp-pcap-fpga.txt | 2 The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the
6 - compatible: should contain "xlnx,zynqmp-pcap-fpga"
18 zynqmp_firmware: zynqmp-firmware {
19 compatible = "xlnx,zynqmp-firmware";
22 compatible = "xlnx,zynqmp-pcap-fpga";
|
| /Linux-v5.10/Documentation/devicetree/bindings/dma/xilinx/ |
| D | xlnx,zynqmp-dpdma.yaml | 4 $id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dpdma.yaml#
7 title: Xilinx ZynqMP DisplayPort DMA Controller Device Tree Bindings
10 These bindings describe the DMA engine included in the Xilinx ZynqMP
25 The cell is the DMA channel ID (see dt-bindings/dma/xlnx-zynqmp-dpdma.h
29 const: xlnx,zynqmp-dpdma
59 compatible = "xlnx,zynqmp-dpdma";
|
| /Linux-v5.10/Documentation/devicetree/bindings/memory-controllers/ |
| D | synopsys.txt | 3 The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and 32-bit
15 - 'xlnx,zynqmp-ddrc-2.40a' : ZynqMP DDR ECC controller
18 Required properties for "xlnx,zynqmp-ddrc-2.40a":
28 compatible = "xlnx,zynqmp-ddrc-2.40a";
|
| /Linux-v5.10/Documentation/devicetree/bindings/reset/ |
| D | xlnx,zynqmp-reset.txt | 7 about zynqmp resets.
13 - compatible: "xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform
23 zynqmp_firmware: zynqmp-firmware {
24 compatible = "xlnx,zynqmp-firmware";
28 compatible = "xlnx,zynqmp-reset";
42 <dt-bindings/reset/xlnx-zynqmp-resets.h>
|
| /Linux-v5.10/Documentation/devicetree/bindings/clock/ |
| D | xlnx,zynqmp-clk.txt | 13 - compatible: Must contain: "xlnx,zynqmp-clk"
22 Input clocks for zynqmp Ultrascale+ clock controller:
46 include/dt-bindings/clock/xlnx-zynqmp-clk.h.
53 zynqmp_firmware: zynqmp-firmware {
54 compatible = "xlnx,zynqmp-firmware";
58 compatible = "xlnx,zynqmp-clk";
|
| /Linux-v5.10/Documentation/devicetree/bindings/firmware/xilinx/ |
| D | xlnx,zynqmp-firmware.txt | 5 The zynqmp-firmware node describes the interface to platform firmware.
6 ZynqMP has an interface to communicate with secure firmware. Firmware
15 "xlnx,zynqmp-firmware" for Zynq Ultrascale+ MPSoC
29 zynqmp_firmware: zynqmp-firmware {
30 compatible = "xlnx,zynqmp-firmware";
|
| /Linux-v5.10/drivers/nvmem/ |
| D | zynqmp_nvmem.c | 10 #include <linux/firmware/xlnx-zynqmp.h>
37 .name = "zynqmp-nvmem",
45 { .compatible = "xlnx,zynqmp-nvmem-fw", },
72 .name = "zynqmp-nvmem",
80 MODULE_DESCRIPTION("ZynqMP NVMEM driver");
|
