| /Linux-v5.15/Documentation/devicetree/bindings/net/ |
| D | qca,ar803x.yaml | 55 vddio-supply:
60 either connect this to the vddio-regulator (1.5V / 1.8V) or the
65 vddio-regulator:
68 Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
75 regulator to VDDIO.
96 vddio-supply = <&vddio>;
98 vddio: vddio-regulator {
119 vddio-supply = <&vddh>;
|
| D | qualcomm-bluetooth.yaml | 40 vddio-supply:
113 - vddio-supply
128 - vddio-supply
154 vddio-supply = <&vreg_s4a_1p8>;
171 vddio-supply = <&vreg_l19b_1p8>;
|
| /Linux-v5.15/arch/arm64/boot/dts/freescale/ |
| D | fsl-ls1028a-kontron-sl28-var4.dts | 37 vddio-supply = <&vddio>;
39 vddio: vddio-regulator { label
40 regulator-name = "VDDIO";
|
| D | fsl-ls1028a-kontron-sl28-var1.dts | 50 vddio-supply = <&vddio>;
52 vddio: vddio-regulator { label
53 regulator-name = "VDDIO";
|
| /Linux-v5.15/Documentation/devicetree/bindings/sound/ |
| D | sgtl5000.yaml | 33 VDDIO-supply:
34 description: the regulator provider of VDDIO
57 VDDIO 1.8V 2.5V 3.3V
70 VDDIO 1.8V 2.5V 3.3V
88 - VDDIO-supply
106 VDDIO-supply = <®_3p3v>;
|
| /Linux-v5.15/Documentation/devicetree/bindings/iio/imu/ |
| D | invensense,icm42600.yaml | 47 vddio-supply:
75 vddio-supply = <&vddio>;
94 vddio-supply = <&vddio>;
|
| /Linux-v5.15/Documentation/devicetree/bindings/iio/accel/ |
| D | bosch,bma255.yaml | 43 vddio-supply: true
86 vddio-supply = <&vddio>;
100 vddio-supply = <&vddio>;
|
| D | bosch,bma400.yaml | 29 vddio-supply:
52 vddio-supply = <&vddio>;
|
| D | fsl,mma7455.yaml | 25 vddio-supply: true
61 vddio-supply = <&iovdd>;
76 vddio-supply = <&iovdd>;
|
| /Linux-v5.15/Documentation/devicetree/bindings/display/panel/ |
| D | asus,z00t-tm5p5-nt35596.yaml | 28 vddio-supply:
29 description: vddio supply
35 - vddio-supply
53 vddio-supply = <&pm8916_l6>;
|
| /Linux-v5.15/Documentation/devicetree/bindings/media/ |
| D | samsung-s5c73m3.txt | 20 - vddio-host-supply : host I/O power supply (1.8V to 2.8V);
21 - vddio-cis-supply : CIS I/O power supply (1.2V to 1.8V);
73 vddio-host-supply = <&ldo18_reg>;
74 vddio-cis-supply = <&ldo9_reg>;
|
| /Linux-v5.15/drivers/gpu/drm/msm/dsi/ |
| D | dsi_cfg.c | 19 {"vddio", 100000, 100}, /* 1.8 V */
39 {"vddio", 100000, 100}, /* 1.8 V */
58 {"vddio", 100000, 100}, /* 1.8 V */
77 {"vddio", 100000, 100}, /* 1.8 V */
92 {"vddio", 100000, 100}, /* 1.8 V */
116 {"vddio", 100000, 100 },/* 1.8 V */
|
| /Linux-v5.15/Documentation/devicetree/bindings/display/msm/ |
| D | dsi-phy-20nm.yaml | 34 vddio-supply:
41 - vddio-supply
64 vddio-supply = <&vddio_reg>;
|
| D | dsi-phy-28nm.yaml | 34 vddio-supply:
41 - vddio-supply
62 vddio-supply = <&vddio_reg>;
|
| /Linux-v5.15/arch/arm/boot/dts/ |
| D | ste-href-tvk1281618-r2.dtsi | 93 vddio-supply = <&db8500_vsmps2_reg>;
116 vddio-supply = <&db8500_vsmps2_reg>;
135 vddio-supply = <&db8500_vsmps2_reg>;
172 vddio-supply = <&db8500_vsmps2_reg>;
184 vddio-supply = <&db8500_vsmps2_reg>;
195 vddio-supply = <&db8500_vsmps2_reg>;
|
| D | imx23-sansa.dts | 133 reg_vddio_sd0: regulator-vddio-sd0 {
135 regulator-name = "vddio-sd0";
141 reg_vddio_sd1: regulator-vddio-sd1 {
143 regulator-name = "vddio-sd1";
|
| D | ste-href-tvk1281618-r3.dtsi | 86 vddio-supply = <&db8500_vsmps2_reg>;
100 vddio-supply = <&db8500_vsmps2_reg>;
112 vddio-supply = <&db8500_vsmps2_reg>;
119 vddio-supply = <&db8500_vsmps2_reg>;
|
| /Linux-v5.15/Documentation/devicetree/bindings/display/bridge/ |
| D | toshiba,tc358775.yaml | 33 vddio-supply:
72 - vddio-supply
98 vddio-supply = <&pm8916_l6>;
157 vddio-supply = <&pm8916_l6>;
|
| D | toshiba,tc358768.yaml | 35 vddio-supply:
77 - vddio-supply
101 vddio-supply = <&v3_3d>;
|
| D | toshiba,tc358764.txt | 7 - vddio-supply: I/O voltage supply, 1.8V or 3.3V
24 vddio-supply = <&vcc_1v8_reg>;
|
| /Linux-v5.15/drivers/net/phy/ |
| D | at803x.c | 196 struct regulator *vddio; member
489 .name = "vddio",
490 .of_match = of_match_ptr("vddio-regulator"),
522 phydev_err(phydev, "failed to register VDDIO regulator\n"); in at8031_register_regulators()
636 priv->vddio = devm_regulator_get_optional(&phydev->mdio.dev, in at803x_parse_dt()
637 "vddio"); in at803x_parse_dt()
638 if (IS_ERR(priv->vddio)) { in at803x_parse_dt()
639 phydev_err(phydev, "failed to get VDDIO regulator\n"); in at803x_parse_dt()
640 return PTR_ERR(priv->vddio); in at803x_parse_dt()
663 if (priv->vddio) { in at803x_probe()
[all …]
|
| /Linux-v5.15/Documentation/devicetree/bindings/ata/ |
| D | nvidia,tegra-ahci.yaml | 75 vddio-supply:
76 description: SATA VDDIO regulator supply.
116 - vddio-supply
|
| /Linux-v5.15/sound/soc/codecs/ |
| D | sgtl5000.c | 97 VDDIO, enumerator
105 "VDDIO",
1282 * according to voltage of vdda and vddio
1283 * 3. line out VAG, normally set to vddio/2
1287 * 2. vdda and vddio voltage value. > 3.1v or not
1293 int vddio; in sgtl5000_set_power_regs() local
1304 vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer); in sgtl5000_set_power_regs()
1310 vddio = vddio / 1000; in sgtl5000_set_power_regs()
1313 if (vdda <= 0 || vddio <= 0 || vddd < 0) { in sgtl5000_set_power_regs()
1320 if (vdda > 3600 || vddio > 3600 || vddd > 1980) { in sgtl5000_set_power_regs()
[all …]
|
| /Linux-v5.15/drivers/gpu/drm/bridge/ |
| D | tc358775.c | 269 struct regulator *vddio; member
287 ret = regulator_enable(tc->vddio); in tc_bridge_pre_enable()
289 dev_err(dev, "regulator vddio enable failed, %d\n", ret); in tc_bridge_pre_enable()
321 ret = regulator_disable(tc->vddio); in tc_bridge_post_disable()
323 dev_err(dev, "regulator vddio disable failed, %d\n", ret); in tc_bridge_post_disable()
678 tc->vddio = devm_regulator_get(dev, "vddio-supply"); in tc_probe()
679 if (IS_ERR(tc->vddio)) { in tc_probe()
680 ret = PTR_ERR(tc->vddio); in tc_probe()
681 dev_err(dev, "vddio-supply not found\n"); in tc_probe()
|
| /Linux-v5.15/Documentation/devicetree/bindings/input/touchscreen/ |
| D | silead_gsl1680.txt | 26 - vddio-supply : regulator phandle for controller VDDIO
|
