| /Linux-v5.10/drivers/clk/tegra/ |
| D | clk-tegra114.c | 637 [tegra_clk_rtc] = { .dt_id = TEGRA114_CLK_RTC, .present = true },
638 [tegra_clk_timer] = { .dt_id = TEGRA114_CLK_TIMER, .present = true },
639 [tegra_clk_uarta] = { .dt_id = TEGRA114_CLK_UARTA, .present = true },
640 [tegra_clk_uartd] = { .dt_id = TEGRA114_CLK_UARTD, .present = true },
641 [tegra_clk_sdmmc2_8] = { .dt_id = TEGRA114_CLK_SDMMC2, .present = true },
642 [tegra_clk_i2s1] = { .dt_id = TEGRA114_CLK_I2S1, .present = true },
643 [tegra_clk_i2c1] = { .dt_id = TEGRA114_CLK_I2C1, .present = true },
644 [tegra_clk_ndflash] = { .dt_id = TEGRA114_CLK_NDFLASH, .present = true },
645 [tegra_clk_sdmmc1_8] = { .dt_id = TEGRA114_CLK_SDMMC1, .present = true },
646 [tegra_clk_sdmmc4_8] = { .dt_id = TEGRA114_CLK_SDMMC4, .present = true },
[all …]
|
| D | clk-tegra124.c | 22 * banks present in the Tegra124/132 CAR IP block. The banks are
748 [tegra_clk_ispb] = { .dt_id = TEGRA124_CLK_ISPB, .present = true },
749 [tegra_clk_rtc] = { .dt_id = TEGRA124_CLK_RTC, .present = true },
750 [tegra_clk_timer] = { .dt_id = TEGRA124_CLK_TIMER, .present = true },
751 [tegra_clk_uarta] = { .dt_id = TEGRA124_CLK_UARTA, .present = true },
752 [tegra_clk_sdmmc2_8] = { .dt_id = TEGRA124_CLK_SDMMC2, .present = true },
753 [tegra_clk_i2s1] = { .dt_id = TEGRA124_CLK_I2S1, .present = true },
754 [tegra_clk_i2c1] = { .dt_id = TEGRA124_CLK_I2C1, .present = true },
755 [tegra_clk_sdmmc1_8] = { .dt_id = TEGRA124_CLK_SDMMC1, .present = true },
756 [tegra_clk_sdmmc4_8] = { .dt_id = TEGRA124_CLK_SDMMC4, .present = true },
[all …]
|
| D | clk-tegra30.c | 686 [tegra_clk_clk_32k] = { .dt_id = TEGRA30_CLK_CLK_32K, .present = true },
687 [tegra_clk_clk_m] = { .dt_id = TEGRA30_CLK_CLK_M, .present = true },
688 [tegra_clk_osc] = { .dt_id = TEGRA30_CLK_OSC, .present = true },
689 [tegra_clk_osc_div2] = { .dt_id = TEGRA30_CLK_OSC_DIV2, .present = true },
690 [tegra_clk_osc_div4] = { .dt_id = TEGRA30_CLK_OSC_DIV4, .present = true },
691 [tegra_clk_pll_ref] = { .dt_id = TEGRA30_CLK_PLL_REF, .present = true },
692 [tegra_clk_spdif_in_sync] = { .dt_id = TEGRA30_CLK_SPDIF_IN_SYNC, .present = true },
693 [tegra_clk_i2s0_sync] = { .dt_id = TEGRA30_CLK_I2S0_SYNC, .present = true },
694 [tegra_clk_i2s1_sync] = { .dt_id = TEGRA30_CLK_I2S1_SYNC, .present = true },
695 [tegra_clk_i2s2_sync] = { .dt_id = TEGRA30_CLK_I2S2_SYNC, .present = true },
[all …]
|
| D | clk-tegra210.c | 27 * banks present in the Tegra210 CAR IP block. The banks are
2308 [tegra_clk_ispb] = { .dt_id = TEGRA210_CLK_ISPB, .present = true },
2309 [tegra_clk_rtc] = { .dt_id = TEGRA210_CLK_RTC, .present = true },
2310 [tegra_clk_timer] = { .dt_id = TEGRA210_CLK_TIMER, .present = true },
2311 [tegra_clk_uarta_8] = { .dt_id = TEGRA210_CLK_UARTA, .present = true },
2312 [tegra_clk_i2s1] = { .dt_id = TEGRA210_CLK_I2S1, .present = true },
2313 [tegra_clk_i2c1] = { .dt_id = TEGRA210_CLK_I2C1, .present = true },
2314 [tegra_clk_sdmmc1_9] = { .dt_id = TEGRA210_CLK_SDMMC1, .present = true },
2315 [tegra_clk_pwm] = { .dt_id = TEGRA210_CLK_PWM, .present = true },
2316 [tegra_clk_i2s2] = { .dt_id = TEGRA210_CLK_I2S2, .present = true },
[all …]
|
| D | clk-tegra20.c | 515 [tegra_clk_ahbdma] = { .dt_id = TEGRA20_CLK_AHBDMA, .present = true },
516 [tegra_clk_apbdma] = { .dt_id = TEGRA20_CLK_APBDMA, .present = true },
517 [tegra_clk_spdif_out] = { .dt_id = TEGRA20_CLK_SPDIF_OUT, .present = true },
518 [tegra_clk_spdif_in] = { .dt_id = TEGRA20_CLK_SPDIF_IN, .present = true },
519 [tegra_clk_sdmmc1] = { .dt_id = TEGRA20_CLK_SDMMC1, .present = true },
520 [tegra_clk_sdmmc2] = { .dt_id = TEGRA20_CLK_SDMMC2, .present = true },
521 [tegra_clk_sdmmc3] = { .dt_id = TEGRA20_CLK_SDMMC3, .present = true },
522 [tegra_clk_sdmmc4] = { .dt_id = TEGRA20_CLK_SDMMC4, .present = true },
523 [tegra_clk_la] = { .dt_id = TEGRA20_CLK_LA, .present = true },
524 [tegra_clk_csite] = { .dt_id = TEGRA20_CLK_CSITE, .present = true },
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/sound/ |
| D | st,sta350.txt | 40 If present, thermal warning recovery is enabled.
43 If present, thermal warning adjustment is enabled.
46 If present, then fault recovery will be enabled.
64 If present, overcurrent warning adjustment is enabled.
67 If present, then MPCC bits are used for MPC coefficients,
71 If present, power bridge correction for THD reduction near maximum
75 If present, FFX mode runs in AM reduction mode, otherwise normal
79 If present, PWM speed mode run on odd speed mode (341.3 kHz) on all
80 channels. If not present, normal PWM spped mode (384 kHz) will be used.
83 If present, distortion compensation variable uses DCC coefficient.
[all …]
|
| D | st,sta32x.txt | 44 If present, thermal warning recovery is enabled.
47 If present, fault detect recovery is enabled.
50 If present, thermal warning adjustment is enabled.
53 If present, then fault recovery will be enabled.
63 If present, then MPCC bits are used for MPC coefficients,
67 If present, power bridge correction for THD reduction near maximum
71 If present, FFX mode runs in AM reduction mode, otherwise normal
75 If present, PWM speed mode run on odd speed mode (341.3 kHz) on all
76 channels. If not present, normal PWM spped mode (384 kHz) will be used.
79 If present, automatic invalid input detect mute is enabled.
|
| D | wm8994.txt | 46 over 0xffff then the register will be left as default. If present 11
55 - wlf,lineout1-se : If present LINEOUT1 is in single ended mode.
56 - wlf,lineout2-se : If present LINEOUT2 is in single ended mode.
58 - wlf,lineout1-feedback : If present LINEOUT1 has common mode feedback
60 - wlf,lineout2-feedback : If present LINEOUT2 has common mode feedback
63 - wlf,ldoena-always-driven : If present LDOENA is always driven.
65 - wlf,spkmode-pu : If present enable the internal pull-up resistor on
68 - wlf,csnaddr-pd : If present enable the internal pull-down resistor on
|
| /Linux-v5.10/Documentation/ABI/testing/ |
| D | sysfs-bus-acpi | 9 This file is not present for device objects representing
27 This file is present for device objects having the _HID
35 _STR control method, if present.
42 _ADR control method, which is present for ACPI device
51 _UID control method, if present.
66 functioning or present, if the method _STA is present.
72 Bit [0] Set if the device is present.
78 Bit [4] Set if the battery is present.
83 that is not present cannot be enabled).
85 Bit 0 can be clear (not present) with bit [3] set (device is
[all …]
|
| D | sysfs-devices-power | 32 events this file is not present. In that case the device cannot
87 the system from sleep states, this attribute is not present.
99 system from sleep states, this attribute is not present. If
112 attribute is not present. If the device is not enabled to wake
123 from sleep states, this attribute is not present. If the
135 states, this attribute is not present. If the device is not
147 this attribute is not present. If the device is not enabled to
158 states, this attribute is not present. If the device is not
171 attribute is not present. If the device is not enabled to wake
183 present. If the device is not enabled to wake up the system
[all …]
|
| D | sysfs-platform-ts5500 | 6 Indicates the presence of an A/D Converter. If it is present,
14 Indicates the presence of an external reset. If it is present,
29 Bitfield showing the jumpers' state. If a jumper is present,
45 Indicates the presence of the RS485 option. If it is present,
53 Indicates the presence of the SRAM option. If it is present,
|
| /Linux-v5.10/drivers/media/cec/platform/ |
| D | Kconfig | 14 The CEC bus is present in the HDMI connector and enables communication
25 CEC bus is present in the HDMI connector and enables communication
40 CEC bus is present in the HDMI connector and enables communication
52 The CEC bus is present in the HDMI connector and enables communication
63 CEC bus is present in the HDMI connector and enables communication
74 CEC bus is present in the HDMI connector and enables communication
86 CEC bus is present in the HDMI connector and enables communication
97 The CEC bus is present in the HDMI connector and enables communication
109 CEC bus is present in the HDMI connector and enables communication
|
| /Linux-v5.10/Documentation/devicetree/bindings/media/ |
| D | s5p-mfc.txt | 3 Multi Format Codec (MFC) is the IP present in Samsung SoCs which
11 (a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs
12 (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
13 (c) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
14 (d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
15 (e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
16 (f) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC
32 support is available; used only by MFC v5 present in Exynos4 SoCs
|
| D | coda.txt | 4 Coda codec IPs are present in i.MX SoCs in various versions,
9 (a) "fsl,imx27-vpu" for CodaDx6 present in i.MX27
10 (b) "fsl,imx51-vpu" for CodaHx4 present in i.MX51
11 (c) "fsl,imx53-vpu" for CODA7541 present in i.MX53
12 (d) "fsl,imx6q-vpu" for CODA960 present in i.MX6q
|
| /Linux-v5.10/drivers/acpi/acpica/ |
| D | nsinit.c | 98 * This means running _INI on all present devices.
208 /* Walk namespace to execute all _INIs on present devices */ in acpi_ns_initialize_devices()
476 * present under Device, Processor, and Thermal objects. in acpi_ns_find_ini_methods()
484 /* Mark parent and bubble up the INI present flag to the root */ in acpi_ns_find_ini_methods()
510 * present, and if so, calls _INI.
548 * Run _STA to determine if this device is present and functioning. We in acpi_ns_init_one_device()
551 * 1) We can only run _INI if the device is present. in acpi_ns_init_one_device()
553 * not present and is not functional (we will not examine the children) in acpi_ns_init_one_device()
555 * The _STA method is not required to be present under the device, we in acpi_ns_init_one_device()
556 * assume the device is present if _STA does not exist. in acpi_ns_init_one_device()
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/phy/ |
| D | nvidia,tegra20-usb-phy.txt | 12 Always present.
14 Present if-and-only-if phy_type == utmi.
17 - clock-names : The following clock names must be present:
19 associated EHCI controller's clock. Always present.
20 - pll_u: PLL_U. Always present.
21 - timer: The timeout clock (clk_m). Present if phy_type == utmi.
23 Present if phy_type == utmi.
27 Present if phy_type == ulpi, and ULPI link mode is in use.
|
| /Linux-v5.10/Documentation/virt/kvm/ |
| D | msr.rst | 181 return PRESENT;
185 return PRESENT;
200 /* Used for 'page not present' events delivered via #PF */
215 present in CPUID. Bit 3 enables interrupt based delivery of 'page ready'
216 events. Bit 3 can only be set if KVM_FEATURE_ASYNC_PF_INT is present in
219 'Page not present' events are currently always delivered as synthetic
226 with asynchronous 'page not present' event. If during a page fault APF
231 Note, since APF 'page not present' events use the same exception vector
238 present' event. The event indicates the page in now available. Guest is
247 available if KVM_FEATURE_ASYNC_PF_INT is present in CPUID.
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/slimbus/ |
| D | bus.txt | 15 If child node is not present and it is instantiated after device
16 discovery (slave device reporting itself present).
20 such cases, child nodes for those devices will be present as
23 Required property for SLIMbus child node if it is present:
35 Optional property for SLIMbus child node if it is present:
|
| /Linux-v5.10/Documentation/devicetree/bindings/net/nfc/ |
| D | st-nci-spi.txt | 12 - ese-present: Specifies that an ese is physically connected to the nfc
14 - uicc-present: Specifies that the uicc swp signal can be physically
33 ese-present;
34 uicc-present;
|
| D | st21nfca.txt | 12 - ese-present: Specifies that an ese is physically connected to the nfc
14 - uicc-present: Specifies that the uicc swp signal can be physically
34 ese-present;
35 uicc-present;
|
| D | st-nci-i2c.txt | 13 - ese-present: Specifies that an ese is physically connected to the nfc
15 - uicc-present: Specifies that the uicc swp signal can be physically
35 ese-present;
36 uicc-present;
|
| /Linux-v5.10/arch/arm/mach-orion5x/ |
| D | ts78xx-setup.c | 351 ts78xx_fpga.supports.ts_rtc.present = 1; in ts78xx_fpga_supports()
352 ts78xx_fpga.supports.ts_nand.present = 1; in ts78xx_fpga_supports()
353 ts78xx_fpga.supports.ts_rng.present = 1; in ts78xx_fpga_supports()
361 ts78xx_fpga.supports.ts_rtc.present = 1; in ts78xx_fpga_supports()
362 ts78xx_fpga.supports.ts_nand.present = 1; in ts78xx_fpga_supports()
363 ts78xx_fpga.supports.ts_rng.present = 1; in ts78xx_fpga_supports()
366 ts78xx_fpga.supports.ts_rtc.present = 0; in ts78xx_fpga_supports()
367 ts78xx_fpga.supports.ts_nand.present = 0; in ts78xx_fpga_supports()
368 ts78xx_fpga.supports.ts_rng.present = 0; in ts78xx_fpga_supports()
377 if (ts78xx_fpga.supports.ts_rtc.present == 1) { in ts78xx_fpga_load_devices()
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/net/ |
| D | fsl-fec.txt | 20 - fsl,magic-packet : If present, indicates that the hardware supports waking
22 - fsl,err006687-workaround-present: If present indicates that the system has
52 - phy-reset-duration : Reset duration in milliseconds. Should present
56 - phy-reset-active-high : If present then the reset sequence using the GPIO
59 - phy-reset-post-delay : Post reset delay in milliseconds. If present then
|
| /Linux-v5.10/tools/testing/selftests/firmware/ |
| D | fw_filesystem.sh | 32 echo "$0: empty filename: async trigger not present, ignoring test" >&2
72 echo "$0: firmware loading: async trigger not present, ignoring test" >&2
91 echo "$0: firmware loading: platform trigger not present, ignoring test" >&2
116 echo "Configuration triggers not present, ignoring test"
438 # Only continue if batched request triggers are present on the
442 # test with the file present
444 echo "Testing with the file present..."
503 # test with both files present
507 echo "Testing with both plain and xz files present..."
528 # test with only xz file present
[all …]
|
| /Linux-v5.10/sound/core/oss/ |
| D | mixer_oss.c | 485 unsigned int present; member
590 if (slot->present & SNDRV_MIXER_OSS_PRESENT_PVOLUME) { in snd_mixer_oss_get_volume1()
592 } else if (slot->present & SNDRV_MIXER_OSS_PRESENT_GVOLUME) { in snd_mixer_oss_get_volume1()
594 } else if (slot->present & SNDRV_MIXER_OSS_PRESENT_GLOBAL) { in snd_mixer_oss_get_volume1()
597 if (slot->present & SNDRV_MIXER_OSS_PRESENT_PSWITCH) { in snd_mixer_oss_get_volume1()
599 } else if (slot->present & SNDRV_MIXER_OSS_PRESENT_GSWITCH) { in snd_mixer_oss_get_volume1()
601 } else if (slot->present & SNDRV_MIXER_OSS_PRESENT_PROUTE) { in snd_mixer_oss_get_volume1()
603 } else if (slot->present & SNDRV_MIXER_OSS_PRESENT_GROUTE) { in snd_mixer_oss_get_volume1()
700 if (slot->present & SNDRV_MIXER_OSS_PRESENT_PVOLUME) { in snd_mixer_oss_put_volume1()
702 if (slot->present & SNDRV_MIXER_OSS_PRESENT_CVOLUME) in snd_mixer_oss_put_volume1()
[all …]
|
