| /Linux-v6.1/Documentation/devicetree/bindings/iio/adc/ |
| D | xlnx,zynqmp-ams.yaml | 25 Sysmon Block |Channel| Details |Measurement
28 AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. |Voltage
29 |1 |Battery voltage measurement, VCC_PSBATT. |Voltage
30 |2 |PL Internal voltage measurement, VCCINT. |Voltage
31 |3 |Block RAM voltage measurement, VCCBRAM. |Voltage
32 |4 |PL Aux voltage measurement, VCCAUX. |Voltage
33 |5 |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL. |Voltage
34 |6 |VCC_PSINTFP_DDR voltage measurement. |Voltage
36 PS Sysmon |7 |LPD temperature measurement. |Temperature
37 |8 |FPD temperature measurement (REMOTE). |Temperature
[all …]
|
| /Linux-v6.1/Documentation/userspace-api/media/dvb/ |
| D | frontend-stat-properties.rst | 64 measurement was not complete yet.
70 measurement for power (actually, 0 to 65535).
83 measurement was not complete yet.
88 measurement for Signal/Noise (actually, 0 to 65535).
103 In order to get the BER (Bit Error Rate) measurement, it should be
107 This measurement is monotonically increased, as the frontend gets more
114 measurement was not complete yet.
128 measurement was taken.
130 It should be noted that this measurement can be smaller than the total
132 manually restart the measurement, losing some data between each
[all …]
|
| /Linux-v6.1/drivers/net/wireless/intel/iwlwifi/fw/api/ |
| D | location.h | 111 * enum iwl_tof_algo_type - Algorithym type for range measurement request
486 * @measure_type: Measurement type: 0 - two sided, 1 - One sided
488 * number of measurement iterations (min 2^0 = 1, max 2^14)
489 * @burst_period: Recommended value to be sent to the AP. Measurement
504 * use it for its ch est measurement (this flag will be set when we
535 * @IWL_INITIATOR_AP_FLAGS_ASAP: Request for ASAP measurement.
548 * @IWL_INITIATOR_AP_FLAGS_SECURED: request secure LTF measurement
586 * @burst_period: Recommended value to be sent to the AP. Measurement
590 * the number of measurement iterations (min 2^0 = 1, max 2^14)
650 * @burst_period: Recommended value to be sent to the AP. Measurement
[all …]
|
| /Linux-v6.1/drivers/s390/char/ |
| D | uvdevice.c | 59 u8 *measurement, u8 *add_data, in uvio_copy_attest_result_to_user() argument
67 if (copy_to_user(user_buf_meas, measurement, uvio_attest->meas_len)) in uvio_copy_attest_result_to_user()
99 * uvio_attestation() - Perform a Retrieve Attestation Measurement UVC.
103 * uvio_attestation() does a Retrieve Attestation Measurement Ultravisor Call.
111 * Measurement and Additional Data are outputs for userspace generated by UV.
115 * going to be included in the Attestation Measurement calculation.
117 * Measurement is a cryptographic measurement of the callers properties,
119 * ARCB, UV will add some Additional Data to the measurement calculation.
122 * If the Retrieve Attestation Measurement UV facility is not present,
134 u8 *measurement = NULL; in uvio_attestation() local
[all …]
|
| /Linux-v6.1/Documentation/hwmon/ |
| D | adm9240.rst | 52 microprocessor-based systems, providing measurement and limit comparison
59 measurement.
68 The measurement cycle
70 The adm9240 driver will take a measurement reading no faster than once
72 measurement update rate and will receive cached data from the most
73 recent measurement.
75 ADM9240 has a very fast 320us temperature and voltage measurement cycle
76 with independent fan speed measurement cycles counting alternating rising
79 DS1780 measurement cycle is about once per second including fan speed.
81 LM81 measurement cycle is about once per 400ms including fan speed.
[all …]
|
| D | sht3x.rst | 33 1. blocking (pull the I2C clock line down while performing the measurement) or
47 2000 0.5 Hz periodic measurement
48 1000 1 Hz periodic measurement
49 500 2 Hz periodic measurement
50 250 4 Hz periodic measurement
51 100 10 Hz periodic measurement
54 In the periodic measure mode, the sensor automatically triggers a measurement
86 for periodic measurement. If the interval is not supported
|
| /Linux-v6.1/security/integrity/ima/ |
| D | Kconfig | 2 # IBM Integrity Measurement Architecture
5 bool "Integrity Measurement Architecture(IMA)"
18 Measurement Architecture(IMA) maintains a list of hash
33 bool "Enable carrying the IMA measurement list across a soft boot"
38 a TPM's quote after a soft boot, the IMA measurement list of the
41 Depending on the IMA policy, the measurement list can grow to
52 measurement list. If unsure, use the default 10.
66 Select the default IMA measurement template.
68 The original 'ima' measurement list template contains a
70 limited to 255 characters. The 'ima-ng' measurement list
[all …]
|
| D | ima_kexec.c | 78 * image for the measurement list for the next kernel.
107 pr_err("Binary measurement list too large.\n"); in ima_add_kexec_buffer()
114 pr_err("Not enough memory for the kexec measurement buffer.\n"); in ima_add_kexec_buffer()
123 pr_err("Error passing over kexec measurement buffer.\n"); in ima_add_kexec_buffer()
132 pr_debug("kexec measurement buffer for the loaded kernel at 0x%lx.\n", in ima_add_kexec_buffer()
138 * Restore the measurement list from the previous kernel.
152 pr_err("Failed to restore the measurement list: %d\n", in ima_load_kexec_buffer()
158 pr_debug("Restoring the measurement list not supported\n"); in ima_load_kexec_buffer()
161 pr_debug("No measurement list to restore\n"); in ima_load_kexec_buffer()
164 pr_debug("Error restoring the measurement list: %d\n", rc); in ima_load_kexec_buffer()
|
| D | ima_api.c | 91 * to an ordered list of measurement entries maintained inside the kernel,
93 * configured TPM PCR) over the hashes of the current list of measurement
96 * Applications retrieve the current kernel-held measurement list through
99 * and is used to validate the measurement list.
128 * ima_add_violation - add violation to measurement list.
130 * Violations are flagged in the measurement list with zero hash values.
221 * the verity digest to be included in the measurement list. A in ima_get_verity_digest()
231 * ima_collect_measurement - collect file measurement
234 * storing the measurement and i_version in the iint.
256 * measurement rule. in ima_collect_measurement()
[all …]
|
| /Linux-v6.1/net/mac80211/ |
| D | spectmgmt.c | 214 skb_put(skb, 1 + sizeof(msr_report->u.action.u.measurement)); in ieee80211_send_refuse_measurement_request()
216 msr_report->u.action.u.measurement.action_code = in ieee80211_send_refuse_measurement_request()
218 msr_report->u.action.u.measurement.dialog_token = dialog_token; in ieee80211_send_refuse_measurement_request()
220 msr_report->u.action.u.measurement.element_id = WLAN_EID_MEASURE_REPORT; in ieee80211_send_refuse_measurement_request()
221 msr_report->u.action.u.measurement.length = in ieee80211_send_refuse_measurement_request()
224 memset(&msr_report->u.action.u.measurement.msr_elem, 0, in ieee80211_send_refuse_measurement_request()
226 msr_report->u.action.u.measurement.msr_elem.token = request_ie->token; in ieee80211_send_refuse_measurement_request()
227 msr_report->u.action.u.measurement.msr_elem.mode |= in ieee80211_send_refuse_measurement_request()
229 msr_report->u.action.u.measurement.msr_elem.type = request_ie->type; in ieee80211_send_refuse_measurement_request()
239 * Ignoring measurement request is spec violation. in ieee80211_process_measurement_req()
[all …]
|
| /Linux-v6.1/drivers/hwmon/ |
| D | hih6130.c | 28 * @lock: mutex to protect measurement values
29 * @valid: only false before first measurement is taken
31 * @temperature: cached temperature measurement value
32 * @humidity: cached humidity measurement value
33 * @write_length: length for I2C measurement request
100 * While the measurement can be completed in ~40ms the sensor takes in hih6130_update_measurements()
113 * Write to slave address to request a measurement. in hih6130_update_measurements()
124 /* measurement cycle time is ~36.65msec */ in hih6130_update_measurements()
132 dev_err(&client->dev, "Error while reading measurement result\n"); in hih6130_update_measurements()
153 * hih6130_show_temperature() - show temperature measurement value in sysfs
[all …]
|
| D | sht21.c | 31 * @lock: mutex to protect measurement values
33 * @temperature: cached temperature measurement value
34 * @humidity: cached humidity measurement value
35 * @valid: only 0 before first measurement is taken
117 * sht21_show_temperature() - show temperature measurement value in sysfs
120 * @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to
139 * sht21_show_humidity() - show humidity measurement value in sysfs
142 * @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to
|
| /Linux-v6.1/arch/s390/kernel/ |
| D | perf_cpum_cf_common.c | 3 * CPU-Measurement Counter Facility Support - Common Layer
38 /* Indicator whether the CPU-Measurement Counter Facility Support is ready */
41 /* CPU-measurement alerts for the counter facility */
53 /* Measurement alerts are shared and might happen when the PMU in cpumf_measurement_alert()
103 /* Initialize the CPU-measurement counter facility */
115 /* Obtain the CPU-measurement alerts for the counter facility */
129 /* Release the CPU-measurement counter facility */
213 * extract measurement counters */ in cpum_cf_init()
216 /* register handler for measurement-alert interruptions */ in cpum_cf_init()
220 pr_err("Registering for CPU-measurement alerts " in cpum_cf_init()
|
| /Linux-v6.1/arch/s390/include/uapi/asm/ |
| D | cmb.h | 8 * struct cmbdata - channel measurement block data for user space
26 * the extended channel measurement facility (first shipped in
47 /* enable channel measurement */
49 /* enable channel measurement */
51 /* read channel measurement data */
|
| /Linux-v6.1/Documentation/misc-devices/ |
| D | apds990x.rst | 20 functionality are highly connected. ALS measurement path must be running
23 ALS produces raw measurement values for two channels: Clear channel
35 selects suitable gain step. After each measurement, reliability of the results
36 is estimated and new measurement is triggered if necessary.
72 RW - measurement rate in Hz
75 RO - supported measurement rates
|
| D | bh1770glc.rst | 46 so that measurement produces about the expected lux value.
71 RW - measurement rate in Hz
74 RO - supported measurement rates
119 RW - Measurement rate (in Hz) when the level is above threshold
123 RW - Measurement rate (in Hz) when the level is below threshold
127 RO - Supported proximity measurement rates in Hz
|
| /Linux-v6.1/drivers/iio/chemical/ |
| D | scd30.h | 15 /* start continuous measurement with pressure compensation */
17 /* stop continuous measurement */
19 /* set/get measurement interval */
21 /* check whether new measurement is ready */
23 /* get measurement */
|
| D | scd4x.c | 100 * Measurement needs to be stopped before sending commands. in scd4x_send_command()
109 /* execution time for stopping measurement */ in scd4x_send_command()
137 * Measurement needs to be stopped before sending commands. in scd4x_read()
138 * Except for reading measurement and data ready command. in scd4x_read()
145 /* execution time for stopping measurement */ in scd4x_read()
168 /* start measurement */ in scd4x_read()
190 /* measurement needs to be stopped before sending commands */ in scd4x_write()
202 /* start measurement, except for forced calibration command */ in scd4x_write()
255 * on error try to start the measurement, in scd4x_write_and_fetch()
256 * puts sensor back into continuous measurement in scd4x_write_and_fetch()
[all …]
|
| /Linux-v6.1/drivers/s390/cio/ |
| D | cmf.c | 3 * Linux on zSeries Channel Measurement Facility support
63 * enum cmb_format - types of supported measurement block formats
65 * @CMF_BASIC: traditional channel measurement blocks supported
80 * format - actual format for all measurement blocks
93 * one instance of struct cmb_operations because the format of the measurement
96 * @alloc: allocate memory for a channel measurement block,
99 * @set: enable or disable measurement
100 * @read: read a measurement entry at an index
101 * @readall: read a measurement block in a common format
102 * @reset: clear the data in the associated measurement block and
[all …]
|
| /Linux-v6.1/drivers/iio/temperature/ |
| D | Kconfig | 18 tristate "Analog Devices Multi-Sensor Digital Temperature Measurement System"
23 high accuracy digital temperature measurement system.
110 tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection"
114 If you say yes here you get support for the Measurement Specialties
121 tristate "Measurement Specialties TSYS02D temperature sensor"
125 If you say yes here you get support for the Measurement Specialties
|
| /Linux-v6.1/include/linux/ |
| D | wm97xx.h | 38 #define WM97XX_POLL 0x8000 /* initiate a polling measurement */
39 #define WM97XX_ADCSEL_X 0x1000 /* x coord measurement */
40 #define WM97XX_ADCSEL_Y 0x2000 /* y coord measurement */
41 #define WM97XX_ADCSEL_PRES 0x3000 /* pressure measurement */
74 #define WM9712_PIL 0x0100 /* current used for pressure measurement. set 400uA else 200uA */
91 #define WM9705_PIL 0x0080 /* current used for pressure measurement. set 400uA else 200uA */
101 #define WM9713_POLL 0x0200 /* initiate a polling measurement */
103 #define WM9713_ADCSEL_X 0x0002 /* X measurement */
104 #define WM9713_ADCSEL_Y 0x0004 /* Y measurement */
105 #define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */
[all …]
|
| /Linux-v6.1/Documentation/admin-guide/device-mapper/ |
| D | dm-ima.rst | 52 Then IMA ASCII measurement log has the following format:
83 | The Kernel configuration CONFIG_IMA_DISABLE_HTABLE allows measurement of duplicate records.
103 The IMA measurement log has the following format for 'dm_table_load':
156 Then IMA ASCII measurement log will have the following entry:
173 The IMA measurement log has the following format for 'dm_device_resume':
197 then IMA ASCII measurement log will have an entry with:
211 The IMA measurement log has the following format for 'dm_device_remove':
235 then IMA ASCII measurement log will have the following entry:
252 The IMA measurement log has the following format for 'dm_table_clear':
269 then IMA ASCII measurement log will have an entry with:
[all …]
|
| /Linux-v6.1/Documentation/input/devices/ |
| D | cma3000_d0x.rst | 17 CMA3000 Tri-axis accelerometer supports Motion detect, Measurement and
24 Measurement Mode:
112 1: 100 Hz Measurement mode
113 2: 400 Hz Measurement mode
114 3: 40 Hz Measurement mode
|
| /Linux-v6.1/Documentation/virt/kvm/x86/ |
| D | amd-memory-encryption.rst | 131 calculates a measurement of the memory contents. The measurement is a signature
151 The KVM_SEV_LAUNCH_MEASURE command is used to retrieve the measurement of the
154 measurement. Since the guest owner knows the initial contents of the guest at
155 boot, the measurement can be verified by comparing it to what the guest owner
158 If len is zero on entry, the measurement blob length is written to len and
168 __u64 uaddr; /* where to copy the measurement */
169 __u32 len; /* length of measurement blob */
172 For more details on the measurement verification flow, see SEV spec Section 6.4.
257 data after the measurement has been validated by the guest owner.
284 If len is zero on entry, the measurement blob length is written to len and
|
| /Linux-v6.1/Documentation/devicetree/bindings/power/supply/ |
| D | stericsson,ab8500-battery.txt | 12 measurement, 'btemp' signal is used when NTC(negative temperature
21 for thermal measurement.
25 for thermal measurement.
|
