Searched full:lfps (Results 1 – 10 of 10) sorted by relevance
132 description: Set if we want to enable u2exit lfps quirk155 description: When set core will filter LFPS reception.160 when set core will disable a 400us delay to start Polling LFPS after
913 * time required for decoding the received LFPS as an LFPS.U1_Exit.918 * phytxelecidle deassertion when LFPS.U1_Exit931 /* LFPS_GEN_PING value This parameter configures the LFPS.Ping generation */
2861 * Driver needs to modify LFPS minimal U1 Exit time for DEV_VER_TI_V1 in cdns3_gadget_config()
1078 * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk1083 * @lfps_filter_quirk: set if we enable LFPS filter quirk1084 * @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk
1365 * detecting LFPS timeout may be controlled by an in xhci_hub_control()1369 * compliance mode the next time LFPS timeout is in xhci_hub_control()
631 * wait 500us for LFPS detector to be disabled before in tegra_xusb_mbox_handle()640 "failed to %s LFPS detection on USB3#%u: %d\n", in tegra_xusb_mbox_handle()
1277 * USB 3 devices resend U3 LFPS wake after a 100ms delay if in xhci_resume()
250 * First, the device sends an LFPS to transition the link between the in usb_set_lpm_pel()260 * When the hub starts to receive the LFPS, there is a slight delay for in usb_set_lpm_pel()261 * it to figure out that one of the ports is sending an LFPS. Then it in usb_set_lpm_pel()262 * will forward the LFPS to its upstream link. The exit latency is the in usb_set_lpm_pel()
3409 /* Default ping LFPS tBurst is too large. */ in tegra_xudc_device_params_init()3430 * Compliance suite appears to be violating polling LFPS tBurst max in tegra_xudc_device_params_init()
2269 * AB errata. Errata 11. Workaround for Default Duration of LFPS in usb_reinit_338x()
