| /Linux-v6.1/drivers/iio/light/ |
| D | apds9300.c | 57 /* Calculated values 1000 * (CH1/CH0)^1.4 for CH1/CH0 from 0 to 0.52 */
65 static unsigned long apds9300_calculate_lux(u16 ch0, u16 ch1) in apds9300_calculate_lux() argument
70 if (ch0 == 0) in apds9300_calculate_lux()
73 tmp = DIV_ROUND_UP(ch1 * 100, ch0); in apds9300_calculate_lux()
75 lux = 3150 * ch0 - (unsigned long)DIV_ROUND_UP_ULL(ch0 in apds9300_calculate_lux()
78 lux = 2290 * ch0 - 2910 * ch1; in apds9300_calculate_lux()
80 lux = 1570 * ch0 - 1800 * ch1; in apds9300_calculate_lux()
82 lux = 338 * ch0 - 260 * ch1; in apds9300_calculate_lux()
239 int ch0, ch1, ret = -EINVAL; in apds9300_read_raw() local
245 ch0 = apds9300_get_adc_val(data, 0); in apds9300_read_raw()
[all …]
|
| D | tsl2583.c | 70 unsigned int ch0; member
108 s16 ch0; member
152 * The raw ch0 and ch1 values of the ambient light sensed in the last
157 * of ch1 value, to the ch0 value, is calculated. The array als_device_lux[]
159 * above the ratio we just calculated. The ch0 and ch1 multiplier constants in
165 u16 ch0, ch1; /* separated ch0/ch1 data from device */ in tsl2583_get_lux() local
216 ch0 = le16_to_cpup((const __le16 *)&buf[0]); in tsl2583_get_lux()
219 chip->als_cur_info.als_ch0 = ch0; in tsl2583_get_lux()
222 if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation)) in tsl2583_get_lux()
225 if (!ch0) { in tsl2583_get_lux()
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/clock/ |
| D | allwinner,sun4i-a10-tcon-ch0-clk.yaml | 4 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml#
24 - allwinner,sun4i-a10-tcon-ch0-clk
49 const: allwinner,sun4i-a10-tcon-ch0-clk
62 compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
65 clock-output-names = "tcon-ch0-sclk";
|
| /Linux-v6.1/drivers/usb/renesas_usbhs/ |
| D | rza.c | 21 /* Input Clock Selection (NOTE: ch0 controls both ch0 and ch1) */ in usbhs_rza1_hardware_init()
40 /* Enable USB PLL (NOTE: ch0 controls both ch0 and ch1) */ in usbhs_rza1_hardware_init()
|
| /Linux-v6.1/drivers/gpu/drm/i915/ |
| D | intel_dram.c | 176 intel_is_dram_symmetric(const struct dram_channel_info *ch0, in intel_is_dram_symmetric() argument
179 return !memcmp(ch0, ch1, sizeof(*ch0)) && in intel_is_dram_symmetric()
180 (ch0->dimm_s.size == 0 || in intel_is_dram_symmetric()
181 !memcmp(&ch0->dimm_l, &ch0->dimm_s, sizeof(ch0->dimm_l))); in intel_is_dram_symmetric()
188 struct dram_channel_info ch0 = {}, ch1 = {}; in skl_dram_get_channels_info() local
194 ret = skl_dram_get_channel_info(i915, &ch0, 0, val); in skl_dram_get_channels_info()
209 if (ch0.ranks == 0 && ch1.ranks == 0) { in skl_dram_get_channels_info()
214 dram_info->wm_lv_0_adjust_needed = ch0.is_16gb_dimm || ch1.is_16gb_dimm; in skl_dram_get_channels_info()
216 dram_info->symmetric_memory = intel_is_dram_symmetric(&ch0, &ch1); in skl_dram_get_channels_info()
|
| /Linux-v6.1/Documentation/devicetree/bindings/display/ |
| D | allwinner,sun4i-a10-tcon.yaml | 186 - const: tcon-ch0
205 - const: tcon-ch0
225 - const: tcon-ch0
246 - const: tcon-ch0
390 "tcon-ch0",
464 "tcon-ch0",
532 clock-names = "ahb", "tcon-ch0";
582 clock-names = "ahb", "tcon-ch0";
|
| /Linux-v6.1/sound/soc/mediatek/mt8183/ |
| D | mt8183-dai-tdm.c | 145 "CH0", "CH1", "CH2", "CH3",
347 {"HDMI_CH0_MUX", "CH0", "HDMI"},
356 {"HDMI_CH1_MUX", "CH0", "HDMI"},
365 {"HDMI_CH2_MUX", "CH0", "HDMI"},
374 {"HDMI_CH3_MUX", "CH0", "HDMI"},
383 {"HDMI_CH4_MUX", "CH0", "HDMI"},
392 {"HDMI_CH5_MUX", "CH0", "HDMI"},
401 {"HDMI_CH6_MUX", "CH0", "HDMI"},
410 {"HDMI_CH7_MUX", "CH0", "HDMI"},
|
| /Linux-v6.1/include/linux/platform_data/ |
| D | tsl2772.h | 14 unsigned int ch0; member
54 * @als_thresh_low: CH0 'low' count to trigger interrupt.
55 * @als_thresh_high: CH0 'high' count to trigger interrupt.
|
| /Linux-v6.1/Documentation/devicetree/bindings/memory-controllers/ |
| D | nvidia,tegra186-mc.yaml | 156 - const: ch0
175 - const: ch0
206 - const: ch0
250 reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3";
|
| /Linux-v6.1/sound/soc/mediatek/mt8192/ |
| D | mt8192-dai-tdm.c | 137 "CH0", "CH1", "CH2", "CH3",
395 {"HDMI_CH0_MUX", "CH0", "HDMI"},
404 {"HDMI_CH1_MUX", "CH0", "HDMI"},
413 {"HDMI_CH2_MUX", "CH0", "HDMI"},
422 {"HDMI_CH3_MUX", "CH0", "HDMI"},
431 {"HDMI_CH4_MUX", "CH0", "HDMI"},
440 {"HDMI_CH5_MUX", "CH0", "HDMI"},
449 {"HDMI_CH6_MUX", "CH0", "HDMI"},
458 {"HDMI_CH7_MUX", "CH0", "HDMI"},
|
| /Linux-v6.1/include/linux/usb/ |
| D | r8a66597.h | 441 #define CH0STCLR 0x0001 /* b1: Ch0 DMA Status Clear */
445 #define CH0BUFW 0x0100 /* b8: Ch0 DMA Buffer Data Transfer Enable */
447 #define CH0BUFS 0x0001 /* b1: Ch0 DMA Buffer Data Status */
451 #define CH0ERRE 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Enable */
453 #define CH0ENDE 0x0001 /* b1: Ch0 DMA Transfer End Int Enable */
457 #define CH0ERRS 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Status */
459 #define CH0ENDS 0x0001 /* b1: Ch0 DMA Transfer End Int Status */
463 #define CH0ERRC 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Stat Clear */
465 #define CH0ENDC 0x0001 /* b1: Ch0 DMA Transfer End Int Stat Clear */
|
| /Linux-v6.1/drivers/misc/ |
| D | tsl2550.c | 143 static int tsl2550_calculate_lux(u8 ch0, u8 ch1) in tsl2550_calculate_lux() argument
148 u16 c0 = count_lut[ch0]; in tsl2550_calculate_lux()
245 u8 ch0, ch1; in __tsl2550_show_lux() local
251 ch0 = ret; in __tsl2550_show_lux()
259 ret = tsl2550_calculate_lux(ch0, ch1); in __tsl2550_show_lux()
|
| /Linux-v6.1/Documentation/firmware-guide/acpi/ |
| D | intel-pmc-mux.rst | 37 Device (CH0)
56 Device (CH0)
123 Device (CH0)
|
| /Linux-v6.1/Documentation/devicetree/bindings/input/ |
| D | iqs62x-keys.yaml | 46 | 0 | CH0 Touch | x | x | x | x | x |
49 | 1 | CH0 Proximity | x | x | x | x | x |
84 * Two-channel SAR. Replaces CH0-2 plus metal touch and proximity events
88 *** One-channel SAR. Replaces CH0-2 touch and proximity events if enabled
|
| /Linux-v6.1/Documentation/devicetree/bindings/dma/ |
| D | renesas,usb-dmac.yaml | 49 - pattern: ch0
98 interrupt-names = "ch0", "ch1";
|
| D | renesas,rz-dmac.yaml | 35 - const: ch0
121 "ch0", "ch1", "ch2", "ch3",
|
| /Linux-v6.1/drivers/gpu/drm/i915/display/ |
| D | intel_dpio_phy.c | 46 * logic. CH0 common lane also contains the IOSF-SB logic for the
72 * pipe A == CMN/PLL/REF CH0
76 * port B == PCS/TX CH0
85 * pipe C == CMN/PLL/REF CH0
87 * port D == PCS/TX CH0
101 * | CH0 | CH1 |
113 * | CH0 |
727 * The document said it needs to set bit 27 for ch0 and bit 26 in chv_set_phy_signal_level()
730 * 27 for ch0 and ch1. in chv_set_phy_signal_level()
|
| /Linux-v6.1/sound/oss/dmasound/ |
| D | dmasound_paula.c | 464 u_char *start, *ch0, *ch1, *ch2, *ch3; in AmiPlayNextFrame() local
475 ch0 = start; in AmiPlayNextFrame()
479 ch0 = start; in AmiPlayNextFrame()
487 custom.aud[0].audlc = (u_short *)ZTWO_PADDR(ch0); in AmiPlayNextFrame()
494 custom.aud[0].audlc = (u_short *)ZTWO_PADDR(ch0); in AmiPlayNextFrame()
500 ch3 = ch0+write_sq_block_size_quarter; in AmiPlayNextFrame()
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | r8a77470.dtsi | 351 dma-names = "ch0", "ch1", "ch2", "ch3";
386 dma-names = "ch0", "ch1", "ch2", "ch3";
420 interrupt-names = "ch0", "ch1";
434 interrupt-names = "ch0", "ch1";
448 interrupt-names = "ch0", "ch1";
462 interrupt-names = "ch0", "ch1";
491 "ch0", "ch1", "ch2", "ch3",
524 "ch0", "ch1", "ch2", "ch3",
|
| /Linux-v6.1/drivers/clk/ |
| D | clk-cs2000-cp.c | 300 int ch = 0; /* it uses ch0 only at this point */ in cs2000_recalc_rate()
376 int ch = 0; /* it uses ch0 only at this point */ in cs2000_set_rate()
383 int ch = 0; /* it uses ch0 only at this point */ in cs2000_set_saved_rate()
469 int ch = 0; /* it uses ch0 only at this point */ in cs2000_clk_register()
|
| /Linux-v6.1/sound/soc/codecs/ |
| D | max98926.c | 145 SND_SOC_DAPM_MUX("PDM CH0 Source",
161 {"PDM CH0 Source", "Current", "DAI_OUT"},
162 {"PDM CH0 Source", "Voltage", "DAI_OUT"},
164 {"PCM Sel", "Analog", "PDM CH0 Source"},
|
| /Linux-v6.1/drivers/iio/adc/ |
| D | intel_mrfld_adc.c | 156 BCOVE_ADC_CHANNEL(IIO_VOLTAGE, 0, "CH0", 0xE9),
168 IIO_MAP("CH0", "bcove-battery", "VBATRSLT"),
|
| /Linux-v6.1/arch/arm64/boot/dts/renesas/ |
| D | r9a09g011.dtsi | 68 interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */
97 interrupt-names = "ch0", "ch1", "ch2", "ch3",
|
| /Linux-v6.1/Documentation/devicetree/bindings/clock/st/ |
| D | st,quadfs.txt | 44 clock-output-names = "clk-s-c0-fs0-ch0",
|
| /Linux-v6.1/Documentation/devicetree/bindings/net/wireless/ |
| D | qcom,ath10k.txt | 68 "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0",
207 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
