| /Linux-v6.1/drivers/input/joystick/ |
| D | adi.c | 7 * Logitech ADI joystick family driver for Linux
19 #define DRIVER_DESC "Logitech ADI joystick family driver"
89 struct adi { struct
110 struct adi adi[2]; argument
116 * adi_read_packet() reads a Logitech ADI packet.
121 struct adi *adi = port->adi; in adi_read_packet() local
128 adi[i].ret = -1; in adi_read_packet()
144 if ((w & 0x30) < 0x30 && adi[i].ret < ADI_MAX_LENGTH && t[i] > 0) { in adi_read_packet()
145 adi[i].data[++adi[i].ret] = w; in adi_read_packet()
165 struct adi *adi = port->adi; in adi_move_bits() local
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/iio/dac/ |
| D | adi,ad5064.yaml | 4 $id: http://devicetree.org/schemas/iio/dac/adi,ad5064.yaml#
23 - adi,ad5024
24 - adi,ad5025
25 - adi,ad5044
26 - adi,ad5045
27 - adi,ad5064
28 - adi,ad5064-1
29 - adi,ad5065
30 - adi,ad5628-1
31 - adi,ad5628-2
[all …]
|
| D | adi,ad5686.yaml | 4 $id: http://devicetree.org/schemas/iio/dac/adi,ad5686.yaml#
18 - adi,ad5310r
19 - adi,ad5672r
20 - adi,ad5674r
21 - adi,ad5676
22 - adi,ad5676r
23 - adi,ad5679r
24 - adi,ad5681r
25 - adi,ad5682r
26 - adi,ad5683
[all …]
|
| D | adi,ad5592r.yaml | 4 $id: http://devicetree.org/schemas/iio/dac/adi,ad5592r.yaml#
15 - adi,ad5592r
16 - adi,ad5593r
61 const: adi,ad5592r
80 adi,mode:
86 <dt-bindings/iio/adi,ad5592r.h>.
97 adi,off-state:
103 <dt-bindings/iio/adi,ad5592r.h>.
111 - adi,mode
117 #include <dt-bindings/iio/adi,ad5592r.h>
[all …]
|
| D | adi,ad5755.yaml | 4 $id: http://devicetree.org/schemas/iio/dac/adi,ad5755.yaml#
15 - adi,ad5755
16 - adi,ad5755-1
17 - adi,ad5757
18 - adi,ad5735
19 - adi,ad5737
28 adi,ext-dc-dc-compenstation-resistor:
34 adi,dc-dc-phase:
47 adi,dc-dc-freq-hz:
50 adi,dc-dc-max-microvolt:
[all …]
|
| D | adi,ad5380.yaml | 4 $id: http://devicetree.org/schemas/iio/dac/adi,ad5380.yaml#
18 - adi,ad5380-3
19 - adi,ad5380-5
20 - adi,ad5381-3
21 - adi,ad5381-5
22 - adi,ad5382-3
23 - adi,ad5382-5
24 - adi,ad5383-3
25 - adi,ad5383-5
26 - adi,ad5384-3
[all …]
|
| D | adi,ad3552r.yaml | 5 $id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
22 - adi,ad3542r
23 - adi,ad3552r
44 adi,vref-out-en:
49 adi,sdo-drive-strength:
77 adi,output-range-microvolt: true
83 adi,output-range-microvolt is not present.
89 adi,gain-offset:
95 adi,gain-scaling-p-inv-log2:
96 description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
[all …]
|
| D | adi,ad5360.yaml | 4 $id: http://devicetree.org/schemas/iio/dac/adi,ad5360.yaml#
16 - adi,ad5360
17 - adi,ad5361
18 - adi,ad5363
19 - adi,ad5370
20 - adi,ad5371
21 - adi,ad5372
22 - adi,ad5373
44 - adi,ad5360
45 - adi,ad5361
[all …]
|
| D | adi,ad5696.yaml | 4 $id: http://devicetree.org/schemas/iio/dac/adi,ad5696.yaml#
18 - adi,ad5311r
19 - adi,ad5338r
20 - adi,ad5671r
21 - adi,ad5675r
22 - adi,ad5691r
23 - adi,ad5692r
24 - adi,ad5693
25 - adi,ad5693r
26 - adi,ad5694
[all …]
|
| D | adi,ad5449.yaml | 4 $id: http://devicetree.org/schemas/iio/dac/adi,ad5449.yaml#
19 - adi,ad5415
20 - adi,ad5426
21 - adi,ad5429
22 - adi,ad5432
23 - adi,ad5439
24 - adi,ad5443
25 - adi,ad5449
45 - adi,ad5415
46 - adi,ad5426
[all …]
|
| D | adi,ad5758.yaml | 4 $id: http://devicetree.org/schemas/iio/dac/adi,ad5758.yaml#
14 const: adi,ad5758
21 adi,dc-dc-mode:
47 adi,range-microvolt:
61 adi,range-microamp:
83 adi,dc-dc-ilim-microamp:
88 adi,slew-time-us:
98 - adi,dc-dc-mode
104 adi,dc-dc-mode:
109 adi,range-microvolt: false
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/iio/adc/ |
| D | adi,ad7476.yaml | 5 $id: http://devicetree.org/schemas/iio/adc/adi,ad7476.yaml#
21 - adi,ad7091
22 - adi,ad7091r
23 - adi,ad7273
24 - adi,ad7274
25 - adi,ad7276
26 - adi,ad7277
27 - adi,ad7278
28 - adi,ad7466
29 - adi,ad7467
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/iio/imu/ |
| D | adi,adis16475.yaml | 4 $id: http://devicetree.org/schemas/iio/imu/adi,adis16475.yaml#
19 - adi,adis16475-1
20 - adi,adis16475-2
21 - adi,adis16475-3
22 - adi,adis16477-1
23 - adi,adis16477-2
24 - adi,adis16477-3
25 - adi,adis16470
26 - adi,adis16465-1
27 - adi,adis16465-2
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/iio/temperature/ |
| D | adi,ltc2983.yaml | 4 $id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml#
19 - adi,ltc2983
27 adi,mux-delay-config-us:
38 adi,filter-notch-freq:
67 adi,sensor-type:
73 - adi,sensor-type
82 adi,sensor-type:
97 adi,single-ended:
102 adi,sensor-oc-current-microamp:
108 adi,cold-junction-handle:
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/hwmon/ |
| D | adi,adm1275.yaml | 5 $id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
25 - adi,adm1075
26 - adi,adm1272
27 - adi,adm1275
28 - adi,adm1276
29 - adi,adm1278
30 - adi,adm1293
31 - adi,adm1294
40 adi,volt-curr-sample-average:
46 adi,power-sample-average:
[all …]
|
| D | adt7475.yaml | 34 - adi,adt7473
35 - adi,adt7475
36 - adi,adt7476
37 - adi,adt7490
42 adi,pwm-active-state:
55 "^adi,bypass-attenuator-in[0-4]$":
64 "adi,pin(5|10)-function":
66 Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or
67 pin 10 on the adi,adt7476 and adi,adt7490.
73 "adi,pin(9|14)-function":
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/iio/frequency/ |
| D | adi,adf4350.yaml | 4 $id: http://devicetree.org/schemas/iio/frequency/adi,adf4350.yaml#
15 - adi,adf4350
16 - adi,adf4351
35 adi,channel-spacing:
40 adi,power-up-frequency:
45 adi,reference-div-factor:
51 adi,reference-doubler-enable:
55 adi,reference-div2-enable:
59 adi,phase-detector-polarity-positive-enable:
63 adi,lock-detect-precision-6ns-enable:
[all …]
|
| D | adi,adrf6780.yaml | 4 $id: http://devicetree.org/schemas/iio/frequency/adi,adrf6780.yaml#
21 - adi,adrf6780
41 adi,vga-buff-en:
47 adi,lo-buff-en:
53 adi,if-mode-en:
59 adi,iq-mode-en:
65 adi,lo-x2-en:
72 adi,lo-ppf-en:
79 adi,lo-en:
85 adi,uc-bias-en:
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/media/i2c/ |
| D | adv7180.yaml | 20 - adi,adv7180
21 - adi,adv7180cp
22 - adi,adv7180st
23 - adi,adv7182
24 - adi,adv7280
25 - adi,adv7280-m
26 - adi,adv7281
27 - adi,adv7281-m
28 - adi,adv7281-ma
29 - adi,adv7282
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/input/touchscreen/ |
| D | ad7879.txt | 4 - compatible : for SPI slave, use "adi,ad7879"
5 for I2C slave, use "adi,ad7879-1"
10 - adi,resistance-plate-x : total resistance of X-plate (for pressure
14 - adi,first-conversion-delay : 0-12: In 128us steps (starting with 128us)
19 - adi,acquisition-time : 0: 2us
24 - adi,median-filter-size : 0: disabled
29 - adi,averaging : 0: 2 middle values (1 if median disabled)
34 - adi,conversion-interval: : 0 : convert one time only
42 compatible = "adi,ad7879-1";
47 adi,resistance-plate-x = <120>;
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/display/bridge/ |
| D | adi,adv7511.yaml | 4 $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
21 - adi,adv7511
22 - adi,adv7511w
23 - adi,adv7513
77 adi,input-depth:
82 adi,input-colorspace:
86 adi,input-clock:
94 adi,clock-delay:
101 adi,embedded-sync:
107 adi,input-style:
[all …]
|
| /Linux-v6.1/Documentation/sparc/ |
| D | adi.rst | 2 Application Data Integrity (ADI)
5 SPARC M7 processor adds the Application Data Integrity (ADI) feature.
6 ADI allows a task to set version tags on any subset of its address
7 space. Once ADI is enabled and version tags are set for ranges of
14 Following steps must be taken by a task to enable ADI fully:
17 the task's entire address space to enable/disable ADI for the task.
20 addresses ADI is being enabled on. MMU checks the version tag only
25 given tag for one ADI block size number of bytes. This step must
28 ADI block size for the platform is provided by the hypervisor to kernel
32 physical memory and the same tag must be present in the ADI version tag
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/spi/ |
| D | sprd,spi-adi.yaml | 5 $id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#"
8 title: Spreadtrum ADI controller
16 ADI is the abbreviation of Anolog-Digital interface, which is used to access
17 analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
21 ADI controller has 50 channels including 2 software read/write channels and
23 users should set ADI registers to access analog chip. For hardware channels,
27 triggered by hardware components instead of ADI software channels.
34 Since we have multi-subsystems will use unique ADI to access analog chip, when
35 one system is reading/writing data by ADI software channels, that should be under
37 data by ADI software channels at the same time, or two parallel routine of setting
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/dma/ |
| D | adi,axi-dmac.txt | 4 - compatible: Must be "adi,axi-dmac-1.00.a".
11 - adi,channels: This sub-node must contain a sub-node for each DMA channel. For
15 Required properties for adi,channels sub-node:
21 - adi,source-bus-width,
22 adi,destination-bus-width: Width of the source or destination bus in bits.
23 - adi,source-bus-type,
24 adi,destination-bus-type: Type of the source or destination bus. Must be one
31 - adi,length-width: Width of the DMA transfer length register.
32 - adi,cyclic: Must be set if the channel supports hardware cyclic DMA
34 - adi,2d: Must be set if the channel supports hardware 2D DMA transfers.
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/iio/cdc/ |
| D | adi,ad7746.yaml | 4 $id: http://devicetree.org/schemas/iio/cdc/adi,ad7746.yaml#
21 - adi,ad7745
22 - adi,ad7746
23 - adi,ad7747
28 adi,excitation-vdd-permille:
34 adi,exca-output-en:
38 adi,exca-output-invert:
46 adi,excb-output-en:
50 adi,excb-output-invert:
67 compatible = "adi,ad7746";
[all …]
|
