/Linux-v6.1/arch/powerpc/boot/dts/ |
D | arches.dts | 3 * Device Tree Source for AMCC Arches (dual 460GT board) 39 model = "PowerPC,460GT"; 59 compatible = "ibm,uic-460gt","ibm,uic"; 69 compatible = "ibm,uic-460gt","ibm,uic"; 81 compatible = "ibm,uic-460gt","ibm,uic"; 93 compatible = "ibm,uic-460gt","ibm,uic"; 105 compatible = "ibm,sdr-460gt"; 110 compatible = "ibm,cpr-460gt"; 115 compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; 125 compatible = "ibm,plb-460gt", "ibm,plb4"; [all …]
|
D | eiger.dts | 2 * Device Tree Source for AMCC (AppliedMicro) Eiger(460SX) 35 model = "PowerPC,460SX"; 54 compatible = "ibm,uic-460sx","ibm,uic"; 64 compatible = "ibm,uic-460sx","ibm,uic"; 76 compatible = "ibm,uic-460sx","ibm,uic"; 88 compatible = "ibm,uic-460sx","ibm,uic"; 100 compatible = "ibm,sdr-460sx"; 105 compatible = "ibm,cpr-460sx"; 110 compatible = "ibm,plb-460sx", "ibm,plb4"; 117 compatible = "ibm,sdram-460sx", "ibm,sdram-405gp"; [all …]
|
D | canyonlands.dts | 2 * Device Tree Source for AMCC Canyonlands (460EX) 33 model = "PowerPC,460EX"; 53 compatible = "ibm,uic-460ex","ibm,uic"; 63 compatible = "ibm,uic-460ex","ibm,uic"; 75 compatible = "ibm,uic-460ex","ibm,uic"; 87 compatible = "ibm,uic-460ex","ibm,uic"; 99 compatible = "ibm,sdr-460ex"; 104 compatible = "ibm,cpr-460ex"; 118 compatible = "ibm,l2-cache-460ex", "ibm,l2-cache"; 128 compatible = "ibm,plb-460ex", "ibm,plb4"; [all …]
|
D | glacier.dts | 2 * Device Tree Source for AMCC Glacier (460GT) 35 model = "PowerPC,460GT"; 55 compatible = "ibm,uic-460gt","ibm,uic"; 65 compatible = "ibm,uic-460gt","ibm,uic"; 77 compatible = "ibm,uic-460gt","ibm,uic"; 89 compatible = "ibm,uic-460gt","ibm,uic"; 101 compatible = "ibm,sdr-460gt"; 106 compatible = "ibm,cpr-460gt"; 111 compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; 121 compatible = "ibm,plb-460gt", "ibm,plb4"; [all …]
|
D | redwood.dts | 2 * Device Tree Source for AMCC Redwood(460SX) 31 model = "PowerPC,460SX"; 50 compatible = "ibm,uic-460sx","ibm,uic"; 60 compatible = "ibm,uic-460sx","ibm,uic"; 72 compatible = "ibm,uic-460sx","ibm,uic"; 84 compatible = "ibm,uic-460sx","ibm,uic"; 96 compatible = "ibm,sdr-460sx"; 101 compatible = "ibm,cpr-460sx"; 106 compatible = "ibm,plb-460sx", "ibm,plb4"; 113 compatible = "ibm,sdram-460sx", "ibm,sdram-405gp"; [all …]
|
/Linux-v6.1/arch/powerpc/platforms/44x/ |
D | Kconfig | 103 select 460EX # Odd since it uses 460GT but the effects are the same 112 select 460EX 125 select 460EX # Odd since it uses 460GT but the effects are the same 137 select 460SX 148 select 460SX 276 config 460EX 282 config 460SX
|
/Linux-v6.1/arch/powerpc/kernel/ |
D | cpu_specs_44x.h | 213 { /* 460EX */ 216 .cpu_name = "460EX", 226 { /* 460EX Rev B */ 229 .cpu_name = "460EX Rev. B", 239 { /* 460GT */ 242 .cpu_name = "460GT", 252 { /* 460GT Rev B */ 255 .cpu_name = "460GT Rev. B", 265 { /* 460SX */ 268 .cpu_name = "460SX",
|
/Linux-v6.1/drivers/char/agp/ |
D | i460-agp.c | 3 * the "Intel 460GTX Chipset Software Developer's Manual": 7 * 460GX support by Chris Ahna <christopher.j.ahna@intel.com> 58 * The 460 spec says we have to read the last location written to make sure that all 130 printk(KERN_ERR PFX "GART SRAMS disabled on 460GX chipset\n"); in i460_fetch_size() 169 /* There isn't anything to do here since 460 has no GART TLB. */ 177 * which are stored along with the aperture size in 460's AGPSIZ register 217 * 460 based systems. in i460_configure() 608 printk(KERN_INFO PFX "Detected Intel 460GX chipset\n"); in agp_intel_i460_probe()
|
D | Kconfig | 113 tristate "Intel 460GX chipset support" 116 This option gives you AGP GART support for the Intel 460GX chipset
|
/Linux-v6.1/arch/powerpc/include/asm/ |
D | dcr-regs.h | 79 /* SDRs (460EX/460GT) */ 134 #define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */
|
/Linux-v6.1/arch/powerpc/include/asm/nohash/32/ |
D | pte-44x.h | 35 * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional 49 * because it doesn't support SMP. However, some later 460 variants
|
/Linux-v6.1/arch/powerpc/platforms/4xx/ |
D | soc.c | 172 /* Check for 460EX/GT special handling */ in ppc4xx_l2c_probe() 173 if (of_device_is_compatible(np, "ibm,l2-cache-460ex") || in ppc4xx_l2c_probe() 174 of_device_is_compatible(np, "ibm,l2-cache-460gt")) in ppc4xx_l2c_probe()
|
D | pci.h | 274 * 460EX additional DCRs 327 * 460SX additional DCRs 467 /* 460sx only */ 470 /* 460sx Bit Mappings */
|
D | pci.c | 178 * running on a 460sx or 476fpe which have 64 bit bus addresses. in ppc4xx_parse_dma_ranges() 181 !(of_device_is_compatible(hose->dn, "ibm,plb-pciex-460sx") in ppc4xx_parse_dma_ranges() 627 * ibm,plb-pciex-460ex 1426 if (of_device_is_compatible(np, "ibm,plb-pciex-460ex")) in ppc4xx_pciex_check_core_init() 1428 if (of_device_is_compatible(np, "ibm,plb-pciex-460sx")) in ppc4xx_pciex_check_core_init() 1525 "ibm,plb-pciex-460sx")){ in ppc4xx_pciex_port_init() 1744 if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx")) in ppc4xx_setup_one_pciex_POM() 1880 if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") || in ppc4xx_configure_pciex_PIMs() 2049 if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx")) in ppc4xx_pciex_port_setup_hose()
|
/Linux-v6.1/drivers/edac/ |
D | ppc4xx_edac.h | 8 * 440SPe, 460EX, 460GT and 460SX.
|
D | Kconfig | 319 440SP, 440SPe, 460EX, 460GT and 460SX.
|
/Linux-v6.1/arch/m68k/include/asm/ |
D | machines.h | 54 #define SM_3_460 0x01 /* Sun 3/460 (460,470,480) series */
|
/Linux-v6.1/drivers/net/ethernet/ibm/emac/ |
D | core.h | 313 * The 405EX and 460EX contain the EMAC4SYNC core 317 * Set if we need phy clock workaround for 460ex or 460gt
|
/Linux-v6.1/Documentation/devicetree/bindings/sound/ |
D | ics43432.txt | 5 frequency (460 kHz to 3.379 MHz according to the data sheet) there must be
|
/Linux-v6.1/sound/pci/ |
D | cs4281.c | 515 * 3. Write ACCTL = Control Register = 460h for initiating the write in snd_cs4281_ac97_write() 516 * 4. Read ACCTL = 460h, DCV should be reset by now and 460h = 07h in snd_cs4281_ac97_write() 527 * ACCTL = Control Register = 460h in snd_cs4281_ac97_write() 545 * ACCTL = 460h, DCV should be reset by now and 460h = 07h in snd_cs4281_ac97_write() 568 * 3. Write ACCTL = Control Register = 460h for initiating the write in snd_cs4281_ac97_read() 569 * 4. Read ACCTL = 460h, DCV should be reset by now and 460h = 17h in snd_cs4281_ac97_read() 581 * ACCTL = Control Register = 460h in snd_cs4281_ac97_read() 606 * ACCTL = 460h, DCV should be reset by now and 460h = 17h in snd_cs4281_ac97_read()
|
/Linux-v6.1/drivers/clocksource/ |
D | timer-tegra.c | 380 return tegra_init_timer(np, false, 460); in tegra210_init_timer() 398 rating = 460; in tegra20_init_timer()
|
/Linux-v6.1/include/dt-bindings/clock/ |
D | rk3036-cru.h | 88 #define HCLK_MAC 460
|
/Linux-v6.1/Documentation/devicetree/bindings/interrupt-controller/ |
D | renesas,rzg2l-irqc.yaml | 113 <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
|
/Linux-v6.1/drivers/pci/controller/dwc/ |
D | pcie-designware.c | 334 if (dw_pcie_ver_is_ge(pci, 460A)) in __dw_pcie_prog_outbound_atu() 345 dw_pcie_ver_is_ge(pci, 460A)) in __dw_pcie_prog_outbound_atu() 575 if (dw_pcie_ver_is_ge(pci, 460A)) { in dw_pcie_iatu_detect_regions()
|
/Linux-v6.1/Documentation/gpu/amdgpu/ |
D | dgpu-asic-info-table.csv | 13 Radeon (TM) (RX|Pro WX) E9260 /460 /V5300X /550 /560(X) Series, POLARIS11, DCE 11.2, 8, VCE 3.4 / U…
|