Home
last modified time | relevance | path

Searched +full:3000 +full:ms (Results 1 – 25 of 205) sorted by relevance

123456789

/Linux-v6.1/Documentation/devicetree/bindings/power/reset/
Dgpio-poweroff.yaml15 from inactive to active. After a delay (active-delay-ms) it
17 delay (inactive-delay-ms) it is configured as active again.
19 the system is still running after waiting some time (timeout-ms).
35 active-delay-ms:
39 inactive-delay-ms:
43 timeout-ms:
44 default: 3000
58 timeout-ms = <3000>;
Dgpio-restart.yaml58 description: Delay (default 100) to wait after driving gpio active [ms]
63 description: Delay (default 100) to wait after driving gpio inactive [ms]
68 description: Delay (default 3000) to wait after completing restart sequence [ms]
85 wait-delay = <3000>;
Dregulator-poweroff.yaml15 CPU still running after a 3000ms delay, a warning is emitted.
/Linux-v6.1/Documentation/devicetree/bindings/serial/
Dpl011.yaml82 poll-rate-ms:
85 default 100ms.
88 poll-timeout-ms:
91 3000ms.
92 default: 3000
109 poll-rate-ms: [ auto-poll ]
110 poll-timeout-ms: [ auto-poll ]
/Linux-v6.1/Documentation/devicetree/bindings/mfd/
Drohm,bd71847-pmic.yaml65 # Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s
67 # Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s
71 rohm,short-press-ms:
81 - 3000
92 rohm,long-press-ms:
99 - 3000
146 rohm,short-press-ms = <10>;
147 rohm,long-press-ms = <2000>;
Drohm,bd71837-pmic.yaml65 # Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s
67 # Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s
71 rohm,short-press-ms:
81 - 3000
91 rohm,long-press-ms:
98 - 3000
142 rohm,short-press-ms = <10>;
143 rohm,long-press-ms = <2000>;
/Linux-v6.1/Documentation/devicetree/bindings/input/
Dinput-reset.txt18 timeout-ms: duration keys must be pressed together in milliseconds before
29 timeout-ms = <3000>;
Dazoteq,iqs7222.yaml128 azoteq,timeout-ati-ms:
133 Specifies the delay (in ms) before ATI is retried following an ATI error.
135 azoteq,rate-ati-ms:
138 description: Specifies the rate (in ms) at which ATI status is evaluated.
140 azoteq,timeout-np-ms:
144 Specifies the length of time (in ms) to wait for an event before moving
147 azoteq,rate-np-ms:
149 maximum: 3000
150 description: Specifies the report rate (in ms) during normal-power mode.
152 azoteq,timeout-lp-ms:
[all …]
/Linux-v6.1/net/hsr/
Dhsr_main.h22 #define HSR_LIFE_CHECK_INTERVAL 2000 /* ms */
23 #define HSR_NODE_FORGET_TIME 60000 /* ms */
24 #define HSR_ANNOUNCE_INTERVAL 100 /* ms */
25 #define HSR_ENTRY_FORGET_TIME 400 /* ms */
30 #define MAX_SLAVE_DIFF 3000 /* ms */
37 #define PRUNE_PERIOD 3000 /* ms */
/Linux-v6.1/drivers/power/reset/
Dgpio-poweroff.c18 #define DEFAULT_TIMEOUT_MS 3000
68 device_property_read_u32(&pdev->dev, "active-delay-ms", &active_delay); in gpio_poweroff_probe()
69 device_property_read_u32(&pdev->dev, "inactive-delay-ms", in gpio_poweroff_probe()
71 device_property_read_u32(&pdev->dev, "timeout-ms", &timeout); in gpio_poweroff_probe()
/Linux-v6.1/Documentation/devicetree/bindings/sound/
Dcs35l33.txt31 20ms. If this property is set to 0,1,2,3 then ramp times would be 40ms,
32 60ms,100ms,175ms respectively for 48KHz sample rate.
72 from 0 to 7 for delays of 5ms, 10ms, 50ms, 100ms, 200ms, 500ms, 1000ms.
73 The default is 100ms.
80 The reference voltage starts at 3000mV with a value of 0x3 and is increased
/Linux-v6.1/drivers/net/wwan/iosm/
Diosm_ipc_imem_ops.h12 #define IPC_READ_TIMEOUT 3000
14 /* The delay in ms for defering the unregister */
21 #define PSI_START_DEFAULT_TIMEOUT 3000
/Linux-v6.1/drivers/leds/
Dleds-lp5523.c133 /* Chip startup time is 500 us, 1 - 2 ms gives some margin */ in lp5523_post_init_device()
306 /* Let the programs run for couple of ms and check the engine status */ in lp5523_init_program_engine()
307 usleep_range(3000, 6000); in lp5523_init_program_engine()
601 usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */ in lp5523_selftest()
607 usleep_range(3000, 6000); /* Was not ready. Wait little bit */ in lp5523_selftest()
625 /* let current stabilize 2 - 4ms before measurements start */ in lp5523_selftest()
629 /* ADC conversion time is 2.7 ms typically */ in lp5523_selftest()
630 usleep_range(3000, 6000); in lp5523_selftest()
636 usleep_range(3000, 6000);/* Was not ready. Wait. */ in lp5523_selftest()
/Linux-v6.1/sound/xen/
Dxen_snd_front_evtchnl.h18 /* Timeout in ms to wait for backend to respond. */
19 #define VSND_WAIT_BACK_MS 3000
/Linux-v6.1/arch/arm/boot/dts/
Daspeed-bmc-facebook-bletchley.dts311 source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
312 sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
313 PDO_VAR(3000, 12000, 3000)
314 PDO_PPS_APDO(3000, 11000, 3000)>;
397 source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
398 sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
399 PDO_VAR(3000, 12000, 3000)
400 PDO_PPS_APDO(3000, 11000, 3000)>;
483 source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
484 sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
[all …]
/Linux-v6.1/drivers/gpu/drm/amd/display/modules/hdcp/
Dhdcp2_transition.c215 set_watchdog_in_ms(hdcp, 3000, output); in mod_hdcp_hdcp2_transition()
220 * 200 ms, so delay 210 ms instead of 200 ms in mod_hdcp_hdcp2_transition()
269 * measurement is slightly greater than 3000 ms. in mod_hdcp_hdcp2_transition()
270 * Delay 100 ms to ensure it is fully timeout in mod_hdcp_hdcp2_transition()
524 set_watchdog_in_ms(hdcp, 3000, output); in mod_hdcp_hdcp2_dp_transition()
/Linux-v6.1/tools/perf/tests/
Dhists_cumulate.c153 #define DSO(he) (he->ms.map->dso->short_name)
154 #define SYM(he) (he->ms.sym->name)
158 #define CDSO(cl) (cl->ms.map->dso->short_name)
159 #define CSYM(cl) (cl->ms.sym->name)
474 { 3000, 1000, "bash", "bash", "main" }, in test3()
475 { 3000, 1000, "perf", "perf", "cmd_record" }, in test3()
594 { 3000, 1000, "bash", "bash", "main" }, in test4()
595 { 3000, 1000, "perf", "perf", "cmd_record" }, in test4()
/Linux-v6.1/tools/testing/selftests/tc-testing/tc-tests/qdiscs/
Dfq.json38 "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq limit 3000",
41 "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 3000p",
176 "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq refill_delay 100ms",
179 … "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*refill_delay 100ms",
/Linux-v6.1/drivers/scsi/bnx2fc/
Dbnx2fc_constants.h75 /* E_D_TOV timer resolution in ms */
82 /* REC timer resolution in ms */
88 /* E_D_TOV timer default wraparound value (2 sec) in 20 ms resolution */
92 /* REC_TOV timer default wraparound value (3 sec) in 20 ms resolution */
94 (3000 / FCOE_REC_TIMER_RESOLUTION_MS)
/Linux-v6.1/drivers/iio/imu/bno055/
Dbno055_ser_core.c71 * 10: bus RX byte timeout (timeout is 30mS)
78 * On the other hand, it is also picky on timeout: if there is a pause > 30mS in
108 * 60/115200 = ~520uS + about 2500mS delay -> ~3mS
109 * In 3mS we could read back about 34 bytes that means 17 samples, this means
195 usleep_range(2000, 3000); in bno055_ser_do_send_cmd()
205 usleep_range(2000, 3000); in bno055_ser_do_send_cmd()
215 /* waiting more than 30mS should clear the BNO055 internal state */ in bno055_ser_do_send_cmd()
/Linux-v6.1/drivers/mfd/
Dlp87565.c82 /* Min 1.2 ms before first I2C transaction */ in lp87565_probe()
83 usleep_range(1500, 3000); in lp87565_probe()
/Linux-v6.1/Documentation/admin-guide/device-mapper/
Dwritecache.rst40 autocommit_time ms (default: 1000)
73 pause_writeback n (default: 3000)
/Linux-v6.1/drivers/gpu/drm/xen/
Dxen_drm_front.h80 /* timeout in ms to wait for backend to respond */
81 #define XEN_DRM_FRONT_WAIT_BACK_MS 3000
/Linux-v6.1/sound/soc/codecs/
Dmax98373.c102 0, 1, TLV_DB_SCALE_ITEM(-3000, 500, 0),
136 "45ms", "225ms", "450ms", "1150ms",
137 "2250ms", "3100ms", "4500ms", "6750ms"
146 "160us", "320us", "640us", "1.28ms",
147 "2.56ms", "5.12ms", "10.24ms", "20.48ms",
148 "40.96ms", "81.92ms", "16.384ms", "32.768ms"
157 "640us", "1.28ms", "2.56ms", "5.120ms",
158 "10.24ms", "20.48ms", "40.96ms", "81.92ms",
159 "163.84ms", "327.68ms", "655.36ms", "1310.72ms"
/Linux-v6.1/drivers/media/dvb-frontends/
Dhorus3a.c173 u32 ms = 0; in horus3a_set_params() local
196 ms = DIV_ROUND_CLOSEST((frequency * mixdiv) / 2, 1000); in horus3a_set_params()
197 if (ms > 0x7FFF) { /* 15 bit */ in horus3a_set_params()
292 data[0] = (u8)((ms >> 7) & 0xFF); in horus3a_set_params()
293 data[1] = (u8)((ms << 1) & 0xFF); in horus3a_set_params()
309 priv->frequency = ms * 2 * 1000 / mixdiv; in horus3a_set_params()
353 /* wait 4ms after power on */ in horus3a_attach()
385 usleep_range(3000, 5000); in horus3a_attach()

123456789