Searched +full:2 +full:v_c210 (Results 1 – 5 of 5) sorted by relevance
/Linux-v6.1/arch/arm/boot/dts/ |
D | exynos4210-trats.dts | 39 gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; 52 cam_af_28v_reg: regulator-2 { 72 regulator-name = "8M_1.2V_EN"; 84 gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; 123 reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; 160 cooling-device = <&cpu0 2 2>, <&cpu1 2 2>; 201 vsync-len = <2>; 322 regulator-name = "VALIVE_1.1V_C210"; 329 regulator-name = "VUSB_1.1V_C210"; 354 regulator-name = "VUSB+VDAC_3.3V_C210"; [all …]
|
D | exynos4210-i9100.dts | 37 gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; 53 cam_af_28v_reg: regulator-2 { 73 regulator-name = "8M_1.2V_EN"; 85 gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; 124 reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; 157 scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 158 i2c-gpio,delay-us = <2>; 160 image-sensor@2d { 214 vback-porch = <2>; 216 hsync-len = <2>; [all …]
|
D | exynos4210-universal_c210.dts | 84 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; 151 vback-porch = <2>; 153 hsync-len = <2>; 180 sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 207 cooling-device = <&cpu0 2 2>; 333 regulator-name = "VARM_1.2V_C210"; 359 regulator-name = "VALIVE_1.2V"; 431 regulator-name = "VHIC_1.2V"; 443 regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; 483 regulator-name = "VMEM_1.2V"; [all …]
|
/Linux-v6.1/Documentation/devicetree/bindings/regulator/ |
D | maxim,max8997.yaml | 40 If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is 41 specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should 52 If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is 53 specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should 64 If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is 65 specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should 329 regulator-name = "VADC_3.3V_C210"; 336 regulator-name = "VALIVE_1.1V_C210"; 343 regulator-name = "VARM_1.2V_C210"; 431 regulator-name = "VDD_ARM_1.2V";
|
D | maxim,max8952.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 21 enum: [0, 1, 2, 3] 42 enum: [0, 1, 2, 3, 4, 5, 6, 7] 48 - 2: 8mV/us 50 - 4: 2mV/us 58 enum: [0, 1, 2] 64 - 2: 19.2 MHz 68 minItems: 2 69 maxItems: 2 103 regulator-name = "VARM_1.2V_C210";
|