| /Linux-v6.1/arch/arm/boot/dts/ |
| D | bcm4708-buffalo-wzr-1750dhp.dts | 4 * DTS for Buffalo WZR-1750DHP
15 compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708";
16 model = "Buffalo WZR-1750DHP (BCM4708)";
|
| D | armada-370-synology-ds213j.dts | 122 1750 6
|
| /Linux-v6.1/Documentation/devicetree/bindings/rtc/ |
| D | microcrystal,rv3032.yaml | 37 - 1750
60 trickle-voltage-millivolt = <1750>;
|
| /Linux-v6.1/Documentation/devicetree/bindings/net/ |
| D | ti,dp83869.yaml | 69 enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000,
75 enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000,
|
| /Linux-v6.1/drivers/phy/cadence/ |
| D | cdns-dphy-rx.c | 66 { 1500, 1750 }, { 1750, 2000 }, { 2000, 2250 }, { 2250, 2500 }
|
| /Linux-v6.1/Documentation/devicetree/bindings/arm/bcm/ |
| D | brcm,bcm4708.yaml | 28 - buffalo,wzr-1750dhp
|
| /Linux-v6.1/Documentation/devicetree/bindings/sound/ |
| D | sgtl5000.yaml | 51 enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ]
|
| D | cs35l33.txt | 91 1800mV with a step size of 50mV up to a maximum value of 1750mV.
|
| /Linux-v6.1/drivers/regulator/ |
| D | ltc3589.c | 97 880, 1750, 3500, 7000
235 .ramp_delay = 1750, \
|
| /Linux-v6.1/tools/power/cpupower/debug/i386/ |
| D | dump_psb.c | 32 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
|
| /Linux-v6.1/drivers/cpufreq/ |
| D | longhaul.h | 319 {1050, 0}, {1800, 30}, {1750, 28}, {1700, 26},
336 {1750, 31}, {1700, 30}, {1650, 29}, {1600, 28},
|
| D | powernow-k7.c | 71 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
|
| /Linux-v6.1/sound/soc/codecs/ |
| D | max9768.c | 91 31, 31, TLV_DB_SCALE_ITEM(-1750, 0, 0),
|
| /Linux-v6.1/drivers/iio/potentiostat/ |
| D | lmp91000.c | 46 1797, 1789, 1782, 1774, 1766, 1758, 1750, 1742, 1734, 1727,
|
| /Linux-v6.1/drivers/comedi/drivers/ |
| D | adv_pci_dio.c | 14 * PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U, PCI-1750,
45 /* PCI-1739U, PCI-1750, PCI1751 interrupt control registers */
|
| /Linux-v6.1/drivers/iio/adc/ |
| D | ad9467.c | 180 {1250, 0x00}, {1500, 0x40}, {1750, 0x80}, {2000, 0xC0},
|
| /Linux-v6.1/drivers/hwmon/ |
| D | hwmon-vid.c | 134 1750 - val * 50; in vid_from_reg()
|
| /Linux-v6.1/drivers/gpu/drm/amd/pm/ |
| D | amdgpu_pm.c | 631 * memory_controller_clock = 1750 Mhz
633 * effective_memory_clock = 1750 Mhz * 1 = 1750 Mhz
635 * data rate = 1750 * 4 = 7000 MT/s
643 * effective_memory_clock = 875 Mhz * 2 = 1750 Mhz
645 * data rate = 1750 * 8 = 14000 MT/s
|
| /Linux-v6.1/arch/mips/bcm47xx/ |
| D | board.c | 163 {{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
|
| /Linux-v6.1/drivers/iio/frequency/ |
| D | adf4371.c | 305 cp_bleed = DIV_ROUND_UP(400 * 1750, st->integer * 375); in adf4371_set_freq()
|
| /Linux-v6.1/drivers/net/phy/ |
| D | dp83869.c | 525 1750, 2000, 2250, 2500, 2750, 3000,
|
| /Linux-v6.1/arch/arm64/boot/dts/rockchip/ |
| D | rk3566-anbernic-rgxx3.dtsi | 75 press-threshold-microvolt = <1750>;
|
| /Linux-v6.1/drivers/media/platform/renesas/rcar-vin/ |
| D | rcar-csi2.c | 152 { .mbps = 1750, .reg = 0x42 },
283 { .mbps = 1750, .reg = 0x3e },
|
| /Linux-v6.1/drivers/rtc/ |
| D | rtc-rv3032.c | 116 static u16 rv3032_trickle_voltages[] = {0, 1750, 3000, 4400};
|
| /Linux-v6.1/drivers/media/dvb-frontends/drx39xyj/ |
| D | drxj.h | 571 #define DRXJ_NTSC_CARRIER_FREQ_OFFSET ((s32)(1750))
|
