| /Linux-v6.1/drivers/mtd/nand/raw/ |
| D | nand_ids.c | 18 * name, device ID, page size, chip size in MiB, eraseblock size, options
60 SZ_2K, SZ_512, SZ_128K, 0, 5, 128, NAND_ECC_INFO(8, SZ_512) },
65 LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
66 LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
67 LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE5, 4, SZ_8K, SP_OPTIONS),
68 LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xD6, 8, SZ_8K, SP_OPTIONS),
69 LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xE6, 8, SZ_8K, SP_OPTIONS),
71 LEGACY_ID_NAND("NAND 16MiB 1,8V 8-bit", 0x33, 16, SZ_16K, SP_OPTIONS),
72 LEGACY_ID_NAND("NAND 16MiB 3,3V 8-bit", 0x73, 16, SZ_16K, SP_OPTIONS),
73 LEGACY_ID_NAND("NAND 16MiB 1,8V 16-bit", 0x43, 16, SZ_16K, SP_OPTIONS16),
[all …]
|
| D | sm_common.c | 129 LEGACY_ID_NAND("SmartMedia 2MiB 3,3V ROM", 0x5d, 2, SZ_8K, NAND_ROM),
130 LEGACY_ID_NAND("SmartMedia 4MiB 3,3V", 0xe3, 4, SZ_8K, 0),
131 LEGACY_ID_NAND("SmartMedia 4MiB 3,3/5V", 0xe5, 4, SZ_8K, 0),
132 LEGACY_ID_NAND("SmartMedia 4MiB 5V", 0x6b, 4, SZ_8K, 0),
133 LEGACY_ID_NAND("SmartMedia 4MiB 3,3V ROM", 0xd5, 4, SZ_8K, NAND_ROM),
134 LEGACY_ID_NAND("SmartMedia 8MiB 3,3V", 0xe6, 8, SZ_8K, 0),
135 LEGACY_ID_NAND("SmartMedia 8MiB 3,3V ROM", 0xd6, 8, SZ_8K, NAND_ROM),
136 LEGACY_ID_NAND("SmartMedia 16MiB 3,3V", 0x73, 16, SZ_16K, 0),
137 LEGACY_ID_NAND("SmartMedia 16MiB 3,3V ROM", 0x57, 16, SZ_16K, NAND_ROM),
138 LEGACY_ID_NAND("SmartMedia 32MiB 3,3V", 0x75, 32, SZ_16K, 0),
[all …]
|
| /Linux-v6.1/arch/ia64/lib/ |
| D | memset.S | 15 we get to a 16B-aligned address, then loop on 128 B chunks using an
54 #define LINE_SIZE 128
75 } { .mib
80 { .mib
82 } { .mib
92 { .mib
95 } { .mib
99 { .mib
102 } { .mib
124 { .mib
[all …]
|
| /Linux-v6.1/drivers/soc/atmel/ |
| D | soc.c | 96 "sam9x60 64MiB DDR2 SiP", "sam9x60"),
99 "sam9x60 128MiB DDR2 SiP", "sam9x60"),
102 "sam9x60 8MiB SDRAM SiP", "sam9x60"),
113 "sama5d225c 16MiB SiP", "sama5d2"),
134 "sama5d27c 128MiB SiP", "sama5d2"),
137 "sama5d27c 64MiB SiP", "sama5d2"),
140 "sama5d27c 128MiB LPDDR2 SiP", "sama5d2"),
143 "sama5d27c 256MiB LPDDR2 SiP", "sama5d2"),
152 "sama5d28c 128MiB SiP", "sama5d2"),
155 "sama5d28c 128MiB LPDDR2 SiP", "sama5d2"),
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/pci/ |
| D | faraday,ftpci100.yaml | 21 The plain variant has 128MiB of non-prefetchable memory space, whereas the
22 "dual" variant has 64MiB. Take this into account when describing the ranges.
85 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
135 ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
137 /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
142 /* 128MiB at 0x00000000-0x07ffffff */
144 /* 64MiB at 0x00000000-0x03ffffff */
146 /* 64MiB at 0x00000000-0x03ffffff */
|
| D | v3-v360epc-pci.txt | 23 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked
44 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */
46 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
48 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
|
| /Linux-v6.1/arch/arm/mach-omap2/ |
| D | iomap.h | 60 #define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
63 #define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
106 #define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
110 #define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
119 #define L4_WK_AM33XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
205 * The overall space is 24MiB (0x4400_0000<->0x457F_FFFF), but mapping
213 * L4_PER1_DRA7XX_PHYS (0x4800_000<>0x480D_2FFF) -> 0.82MiB (alloc 1MiB)
221 * L4_CFG_MPU_DRA7XX_PHYS (0x48210000<>0x482A_F2FF) -> 0.62MiB (alloc 1MiB)
230 * L4_PER2_DRA7XX_PHYS (0x4840_0000<>0x4848_8FFF) -> .53MiB (alloc 1MiB)
238 * L4_PER3_DRA7XX_PHYS (0x4880_0000<>0x489E_0FFF) -> 1.87MiB (alloc 2MiB)
[all …]
|
| /Linux-v6.1/drivers/mtd/ |
| D | ssfdc.c | 28 the 128MiB) */
43 #define MiB(x) ( KiB(x) * 1024L ) macro
46 1MiB 2MiB 4MiB 8MiB 16MiB 32MiB 64MiB 128MiB
50 SumSector 2,000 4,000 8,000 16,000 32,000 64,000 128,000 256,000
63 { MiB( 1), 125, 4, 4 },
64 { MiB( 2), 125, 4, 8 },
65 { MiB( 4), 250, 4, 8 },
66 { MiB( 8), 250, 4, 16 },
67 { MiB( 16), 500, 4, 16 },
68 { MiB( 32), 500, 8, 16 },
[all …]
|
| /Linux-v6.1/Documentation/filesystems/ext4/ |
| D | blocks.rst | 54 - 8MiB
55 - 32MiB
56 - 128MiB
116 - 8MiB
117 - 32MiB
118 - 128MiB
|
| D | bigalloc.rst | 22 means that a block group addresses 32 gigabytes instead of 128 megabytes,
29 128MiB); however, the minimum allocation unit becomes a cluster, not a
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | armada-385-linksys-caiman.dts | 75 /* 128MiB */
83 reg = <0x0000000 0x200000>; /* 2MiB */
99 reg = <0x900000 0x100000>; /* 1MiB */
106 reg = <0xa00000 0x2800000>; /* 40MiB */
111 reg = <0x1000000 0x2200000>; /* 34MiB */
117 reg = <0x3200000 0x2800000>; /* 40MiB */
122 reg = <0x3800000 0x2200000>; /* 34MiB */
126 * 38MiB, last MiB is for the BBT, not writable
141 reg = <0x280000 0x680000>; /* 6.5MiB */
|
| D | armada-385-linksys-cobra.dts | 75 /* 128MiB */
83 reg = <0x0000000 0x200000>; /* 2MiB */
99 reg = <0x900000 0x100000>; /* 1MiB */
106 reg = <0xa00000 0x2800000>; /* 40MiB */
111 reg = <0x1000000 0x2200000>; /* 34MiB */
117 reg = <0x3200000 0x2800000>; /* 40MiB */
122 reg = <0x3800000 0x2200000>; /* 34MiB */
126 * 38MiB, last MiB is for the BBT, not writable
141 reg = <0x280000 0x680000>; /* 6.5MiB */
|
| D | armada-385-linksys-shelby.dts | 75 /* 128MiB */
83 reg = <0x0000000 0x200000>; /* 2MiB */
99 reg = <0x900000 0x100000>; /* 1MiB */
106 reg = <0xa00000 0x2800000>; /* 40MiB */
111 reg = <0x1000000 0x2200000>; /* 34MiB */
117 reg = <0x3200000 0x2800000>; /* 40MiB */
122 reg = <0x3800000 0x2200000>; /* 34MiB */
126 * 38MiB, last MiB is for the BBT, not writable
141 reg = <0x280000 0x680000>; /* 6.5MiB */
|
| D | armada-385-linksys-rango.dts | 83 /* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
91 reg = <0x0000000 0x200000>; /* 2MiB */
97 reg = <0x200000 0x20000>; /* 128KiB */
120 reg = <0xa00000 0x5000000>; /* 80MiB */
125 reg = <0x1000000 0x4a00000>; /* 74MiB */
131 reg = <0x5a00000 0x5000000>; /* 80MiB */
136 reg = <0x6000000 0x4a00000>; /* 74MiB */
140 * 86MiB, last MiB is for the BBT, not writable
155 reg = <0x260000 0x5c0000>; /* 5.75MiB */
|
| D | nuvoton-wpcm450-supermicro-x9sci-ln4f.dts | 6 /* The last 16 MiB are dedicated to the GPU */
24 reg = <0 0x08000000>; /* 128 MiB */
|
| D | armada-370-dlink-dns327l.dts | 30 reg = <0x00000000 0x20000000>; /* 512 MiB */
286 /* 1.0 MiB */
293 /* 128 KiB */
300 /* 7 MiB */
306 /* ~ 84 MiB */
313 /* 5 MiB */
319 /* 29 MiB */
325 /* 1 MiB for BBT */
|
| D | gemini.dtsi | 317 /* 1MiB I/O space 0x50000000-0x500fffff */
319 /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
324 /* 128MiB at 0x00000000-0x07ffffff */
326 /* 64MiB at 0x00000000-0x03ffffff */
328 /* 64MiB at 0x00000000-0x03ffffff */
|
| D | armada-385-linksys.dtsi | 23 reg = <0x00000000 0x20000000>; /* 512 MiB */
142 /* 128MiB or 256MiB */
|
| /Linux-v6.1/arch/mips/bcm47xx/ |
| D | prom.c | 71 * BCM47XX uses 128MB for addressing the ram, if the system contains in prom_init_mem()
79 /* Accessing memory after 128 MiB will cause an exception */ in prom_init_mem()
80 max = 128 << 20; in prom_init_mem()
83 /* Loop condition may be not enough, off may be over 1 MiB */ in prom_init_mem()
86 pr_debug("Assume 128MB RAM\n"); in prom_init_mem()
94 /* Ignoring the last page when ddr size is 128M. Cached in prom_init_mem()
96 * using address above 128M stepping out of the ddr address in prom_init_mem()
99 if (c->cputype == CPU_74K && (mem == (128 << 20))) in prom_init_mem()
146 if (lowmem != 128 << 20 || !highmem_region) in bcm47xx_prom_highmem_init()
161 for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) { in bcm47xx_prom_highmem_init()
[all …]
|
| /Linux-v6.1/drivers/net/ethernet/broadcom/ |
| D | b44.h | 160 #define EMAC_INT_MIB 0x00000002 /* MIB Interrupt */
184 #define B44_MIB_CTRL 0x0438UL /* EMAC MIB Control */
186 #define B44_TX_GOOD_O 0x0500UL /* MIB TX Good Octets */
187 #define B44_TX_GOOD_P 0x0504UL /* MIB TX Good Packets */
188 #define B44_TX_O 0x0508UL /* MIB TX Octets */
189 #define B44_TX_P 0x050CUL /* MIB TX Packets */
190 #define B44_TX_BCAST 0x0510UL /* MIB TX Broadcast Packets */
191 #define B44_TX_MCAST 0x0514UL /* MIB TX Multicast Packets */
192 #define B44_TX_64 0x0518UL /* MIB TX <= 64 byte Packets */
193 #define B44_TX_65_127 0x051CUL /* MIB TX 65 to 127 byte Packets */
[all …]
|
| /Linux-v6.1/Documentation/arm/ |
| D | booting.rst | 142 A safe location is just above the 128MiB boundary from start of RAM.
158 be loaded just above the 128MiB boundary from the start of RAM as
175 kernel should be placed in the first 128MiB of RAM. It is recommended
176 that it is loaded above 32MiB in order to avoid the need to relocate
|
| /Linux-v6.1/Documentation/networking/ |
| D | smc-sysctl.rst | 50 only allowed 512KiB for SMC-R and 1MiB for SMC-D.
59 only allowed 512KiB for SMC-R and 1MiB for SMC-D.
61 Default: 128K
|
| /Linux-v6.1/tools/perf/arch/arm64/util/ |
| D | arm-spe.c | 29 #define MiB(x) ((x) * 1024 * 1024) macro
96 * snapshot size is specified, then the default is 4MiB for privileged users, 128KiB for in arm_spe_snapshot_resolve_auxtrace_defaults()
99 * The default auxtrace mmap size is 4MiB/page_size for privileged users, 128KiB for in arm_spe_snapshot_resolve_auxtrace_defaults()
110 opts->auxtrace_mmap_pages = MiB(4) / page_size; in arm_spe_snapshot_resolve_auxtrace_defaults()
112 opts->auxtrace_mmap_pages = KiB(128) / page_size; in arm_spe_snapshot_resolve_auxtrace_defaults()
205 opts->auxtrace_mmap_pages = MiB(4) / page_size; in arm_spe_recording_options()
207 opts->auxtrace_mmap_pages = KiB(128) / page_size; in arm_spe_recording_options()
|
| /Linux-v6.1/drivers/net/wireless/mediatek/mt76/mt7915/ |
| D | mac.c | 14 .pulse_th = { 110, -10, -80, 40, 5200, 128, 5200 },
28 .pulse_th = { 110, -10, -80, 40, 5200, 128, 5200 },
39 .pulse_th = { 110, -10, -80, 40, 5200, 128, 5200 },
1468 struct mib_stats *mib = &phy->mib; in mt7915_mac_update_stats() local
1473 mib->fcs_err_cnt += is_mt7915(&dev->mt76) ? in mt7915_mac_update_stats()
1478 mib->rx_fifo_full_cnt += FIELD_GET(MT_MIB_SDR4_RX_FIFO_FULL_MASK, cnt); in mt7915_mac_update_stats()
1481 mib->rx_mpdu_cnt += cnt; in mt7915_mac_update_stats()
1484 mib->channel_idle_cnt += FIELD_GET(MT_MIB_SDR6_CHANNEL_IDL_CNT_MASK, cnt); in mt7915_mac_update_stats()
1487 mib->rx_vector_mismatch_cnt += in mt7915_mac_update_stats()
1491 mib->rx_delimiter_fail_cnt += in mt7915_mac_update_stats()
[all …]
|
| /Linux-v6.1/drivers/net/ethernet/broadcom/genet/ |
| D | bcmgenet.c | 1060 STAT_GENET_MIB_RX("rx_64_octets", mib.rx.pkt_cnt.cnt_64),
1061 STAT_GENET_MIB_RX("rx_65_127_oct", mib.rx.pkt_cnt.cnt_127),
1062 STAT_GENET_MIB_RX("rx_128_255_oct", mib.rx.pkt_cnt.cnt_255),
1063 STAT_GENET_MIB_RX("rx_256_511_oct", mib.rx.pkt_cnt.cnt_511),
1064 STAT_GENET_MIB_RX("rx_512_1023_oct", mib.rx.pkt_cnt.cnt_1023),
1065 STAT_GENET_MIB_RX("rx_1024_1518_oct", mib.rx.pkt_cnt.cnt_1518),
1066 STAT_GENET_MIB_RX("rx_vlan_1519_1522_oct", mib.rx.pkt_cnt.cnt_mgv),
1067 STAT_GENET_MIB_RX("rx_1522_2047_oct", mib.rx.pkt_cnt.cnt_2047),
1068 STAT_GENET_MIB_RX("rx_2048_4095_oct", mib.rx.pkt_cnt.cnt_4095),
1069 STAT_GENET_MIB_RX("rx_4096_9216_oct", mib.rx.pkt_cnt.cnt_9216),
[all …]
|
