| /Linux-v5.10/drivers/leds/trigger/ |
| D | ledtrig-activity.c | 72 /* We come here every 100ms in the worst case, so that's 100M ns of in led_activity_function()
86 usage = 100; in led_activity_function()
88 usage = 100 * diff_used / diff_boot; in led_activity_function()
99 * (typically 10ms every second, or 10ms ON, 990ms OFF). Then we want in led_activity_function()
103 * cycle (10ms ON, 90ms OFF). After this point, the blinking frequency in led_activity_function()
105 * the activity, up to the point where we have 90ms ON, 10ms OFF when in led_activity_function()
111 * - a target CPU usage of min(50%, 100%/#CPU) for a 10% duty cycle in led_activity_function()
112 * (10ms ON, 90ms OFF) in led_activity_function()
117 * ON_ms = 10 + (usage-target)/(100%-target) * 80 in led_activity_function()
118 * OFF_ms = 90 - (usage-target)/(100%-target) * 80 in led_activity_function()
[all …]
|
| /Linux-v5.10/tools/power/cpupower/bench/ |
| D | README-BENCH | 34 You can specify load (100% CPU load) and sleep (0% CPU load) times in us which
41 This part of the configuration file will create 25ms load/sleep turns,
48 Will increase load and sleep time by 25ms 5 times.
50 25ms load/sleep time repeated 20 times (cycles).
51 50ms load/sleep time repeated 20 times (cycles).
53 100ms load/sleep time repeated 20 times (cycles).
69 100% CPU load (load) | 0 % CPU load (sleep) | round
70 25 ms | 25 ms | 1
71 50 ms | 50 ms | 2
73 For example if ondemand governor is configured to have a 50ms
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/power/reset/ |
| D | gpio-poweroff.txt | 12 triggering positive edge triggered power off. After a delay of 100ms,
14 triggering negative edge triggered power off. After another 100ms
16 the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
30 - active-delay-ms: Delay (default 100) to wait after driving gpio active
31 - inactive-delay-ms: Delay (default 100) to wait after driving gpio inactive
32 - timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is
33 specified, 3000 ms is used.
40 timeout-ms = <3000>;
|
| D | gpio-restart.txt | 40 - active-delay: Delay (default 100) to wait after driving gpio active [ms]
41 - inactive-delay: Delay (default 100) to wait after driving gpio inactive [ms]
43 sequence [ms]
51 active-delay = <100>;
52 inactive-delay = <100>;
|
| /Linux-v5.10/Documentation/fb/ |
| D | viafb.modes | 15 # Sync Width 3.813 us 0.064 ms
17 # Front Porch 0.636 us 0.318 ms
19 # Back Porch 1.907 us 1.048 ms
21 # Active Time 25.422 us 15.253 ms
23 # Blank Time 6.356 us 1.430 ms
40 # Sync Width 2.032 us 0.080 ms
42 # Front Porch 0.508 us 0.027 ms
44 # Back Porch 3.810 us 0.427 ms
46 # Active Time 20.317 us 12.800 ms
48 # Blank Time 6.349 us 0.533 ms
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/sound/ |
| D | cs35l33.txt | 23 a value of 1 and will increase at a step size of 100mV until a maximum of
31 20ms. If this property is set to 0,1,2,3 then ramp times would be 40ms,
32 60ms,100ms,175ms respectively for 48KHz sample rate.
72 from 0 to 7 for delays of 5ms, 10ms, 50ms, 100ms, 200ms, 500ms, 1000ms.
73 The default is 100ms.
81 by 100mV per step to a maximum of 5500mV.
|
| D | cs42l42.txt | 33 0 - 0ms,
34 1 - 125ms,
35 2 - 250ms,
36 3 - 500ms,
37 4 - 750ms,
45 0 - 0ms,
46 1 - 125ms,
47 2 - 250ms,
48 3 - 500ms,
49 4 - 750ms,
[all …]
|
| /Linux-v5.10/sound/soc/codecs/ |
| D | max98373.c | 86 9, 10, TLV_DB_SCALE_ITEM(500, 100, 0),
89 0, 9, TLV_DB_SCALE_ITEM(800, 100, 0),
93 2, 4, TLV_DB_SCALE_ITEM(100, 100, 0),
96 0, 9, TLV_DB_SCALE_ITEM(800, 100, 0),
103 10, 13, TLV_DB_SCALE_ITEM(-500, 100, 0),
104 14, 15, TLV_DB_SCALE_ITEM(-100, 50, 0),
107 0, 15, TLV_DB_SCALE_ITEM(-1500, 100, 0),
133 "45ms", "225ms", "450ms", "1150ms",
134 "2250ms", "3100ms", "4500ms", "6750ms"
143 "160us", "320us", "640us", "1.28ms",
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/input/touchscreen/ |
| D | stmpe.txt | 16 2 -> 100 us
18 4 -> 1 ms
19 5 -> 5 ms
20 6 -> 10 ms
21 7 -> 50 ms
24 1 -> 100 us
26 3 -> 1 ms
27 4 -> 5 ms
28 5 -> 10 ms
29 6 -> 50 ms
[all …]
|
| D | cyttsp.txt | 27 - active-interval-ms : the minimum period in ms between consecutive
30 - lowpower-interval-ms : the minimum period in ms between consecutive
33 - touch-timeout-ms : minimum time in ms spent in the active power state while no
62 active-interval-ms = <0>;
63 lowpower-interval-ms = <200>;
64 touch-timeout-ms = <100>;
87 active-interval-ms = <0>;
88 lowpower-interval-ms = <200>;
89 touch-timeout-ms = <100>;
|
| /Linux-v5.10/include/linux/usb/ |
| D | pd.h | 275 #define PDO_PPS_APDO_MAX_VOLT_SHIFT 17 /* 100mV units */
276 #define PDO_PPS_APDO_MIN_VOLT_SHIFT 8 /* 100mV units */
283 ((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MIN_VOLT_SHIFT)
285 ((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MAX_VOLT_SHIFT)
332 PDO_PPS_APDO_VOLT_MASK) * 100; in pdo_pps_apdo_min_voltage()
338 PDO_PPS_APDO_VOLT_MASK) * 100; in pdo_pps_apdo_max_voltage()
457 #define PD_T_SEND_SOURCE_CAP 150 /* 100 - 200 ms */
458 #define PD_T_SENDER_RESPONSE 60 /* 24 - 30 ms, relaxed */
459 #define PD_T_RECEIVER_RESPONSE 15 /* 15ms max */
474 #define PD_T_VCONN_SOURCE_ON 100
[all …]
|
| /Linux-v5.10/net/mac80211/ |
| D | rc80211_minstrel_debugfs.c | 61 struct minstrel_debugfs_info *ms; in minstrel_stats_open() local
65 ms = kmalloc(2048, GFP_KERNEL); in minstrel_stats_open()
66 if (!ms) in minstrel_stats_open()
69 file->private_data = ms; in minstrel_stats_open()
70 p = ms->buf; in minstrel_stats_open()
92 tp_max = minstrel_get_tp_avg(mr, MINSTREL_FRAC(100,100)); in minstrel_stats_open()
112 ms->len = p - ms->buf; in minstrel_stats_open()
114 WARN_ON(ms->len + sizeof(*ms) > 2048); in minstrel_stats_open()
123 struct minstrel_debugfs_info *ms; in minstrel_stats_csv_open() local
127 ms = kmalloc(2048, GFP_KERNEL); in minstrel_stats_csv_open()
[all …]
|
| D | rc80211_minstrel_ht_debugfs.c | 18 struct minstrel_debugfs_info *ms; in minstrel_stats_read() local
20 ms = file->private_data; in minstrel_stats_read()
21 return simple_read_from_buffer(buf, len, ppos, ms->buf, ms->len); in minstrel_stats_read()
100 tp_max = minstrel_ht_get_tp_avg(mi, i, j, MINSTREL_FRAC(100, 100)); in minstrel_ht_stats_dump()
125 struct minstrel_debugfs_info *ms; in minstrel_ht_stats_open() local
137 ms = kmalloc(32768, GFP_KERNEL); in minstrel_ht_stats_open()
138 if (!ms) in minstrel_ht_stats_open()
141 file->private_data = ms; in minstrel_ht_stats_open()
142 p = ms->buf; in minstrel_ht_stats_open()
164 ms->len = p - ms->buf; in minstrel_ht_stats_open()
[all …]
|
| /Linux-v5.10/samples/bpf/ |
| D | tracex3_user.c | 16 #define SLOTS 100
68 printf("|1ns |10ns |100ns |1us |10us |100us" in print_banner()
69 " |1ms |10ms |100ms |1s |10s\n"); in print_banner()
71 printf("|1us |10us |100us |1ms |10ms " in print_banner()
72 "|100ms |1s |10s\n"); in print_banner()
|
| /Linux-v5.10/Documentation/ABI/testing/ |
| D | sysfs-class-led-trigger-oneshot | 8 Defaults to 100 ms.
17 Defaults to 100 ms.
25 delay_on ms, then blink off for delay_off ms, leaving the LED
26 normally off. If set to 1, blink off for delay_off ms, then
27 blink on for delay_on ms, leaving the LED normally on.
|
| /Linux-v5.10/drivers/usb/chipidea/ |
| D | otg_fsm.h | 18 #define TA_WAIT_VRISE (100) /* a_wait_vrise: section 7.1.2
20 * TA_VBUS_RISE <= 100ms, section 4.4
31 * and 30000 ms, section 5.5, Table 5-1
34 #define TA_AIDL_BDIS (5000) /* a_suspend min 200 ms, section 5.2.1
39 * 500ms is used for B switch to host
48 #define TB_DATA_PLS (10) /* b_srp_init,continue 5~10ms
56 #define TB_ASE0_BRST (155) /* minimum 155 ms, section:5.3.1 */
62 #define TB_AIDL_BDIS (20) /* 4ms ~ 150ms, section 5.2.1 */
|
| /Linux-v5.10/Documentation/devicetree/bindings/serial/ |
| D | pl011.yaml | 87 poll-rate-ms:
90 default 100ms.
92 default: 100
94 poll-timeout-ms:
97 3000ms.
107 poll-rate-ms: [ auto-poll ]
108 poll-timeout-ms: [ auto-poll ]
|
| /Linux-v5.10/arch/microblaze/kernel/ |
| D | mcount.S | 16 /* FIXME MS: I think that I don't need to save all regs */
44 swi r28, r1, 100; \
75 lwi r28, r1, 100; \
88 /* MS: It is just barrier which is removed from C code */
109 /* MS: jump over graph function - replaced from C code */
112 addik r5, r1, 120; /* MS: load parent addr */
113 addik r6, r15, 0; /* MS: load current function addr */
116 /* MS: graph was taken that's why - can jump over function trace */
122 /* MS: test function trace if is taken or not */
126 beqid r5, end; /* MS: not taken -> jump over */
[all …]
|
| /Linux-v5.10/tools/testing/selftests/rseq/ |
| D | run_param_test.sh | 34 SLOW_REPS=100
107 echo "Yield injection (100%)"
116 echo "Kill injection (100%)"
119 echo "Sleep injection (1ms, 25%)"
122 echo "Sleep injection (1ms, 50%)"
125 echo "Sleep injection (1ms, 100%)"
|
| /Linux-v5.10/Documentation/input/devices/ |
| D | cma3000_d0x.rst | 26 axis and supports 400, 100, 40 Hz sample frequency.
112 1: 100 Hz Measurement mode
116 5: 100 Hz Free fall mode
132 X: (X & 0x70) * 100 ms (MDTMR)
133 (X & 0x0F) * 2.5 ms (FFTMR 400 Hz)
134 (X & 0x0F) * 10 ms (FFTMR 100 Hz)
|
| /Linux-v5.10/drivers/thermal/ |
| D | cpuidle_cooling.c | 37 * which is fixed. If we reach 100% of idle injection ratio, that
44 * running = idle x ((100 / ratio) - 1)
48 * running = (idle x 100) / ratio - idle
51 * with 10ms of idle injection and 10ms of running duration.
61 return ((idle_duration_us * 100) / state) - idle_duration_us; in cpuidle_cooling_runtime()
69 * The function always returns 100 as the injection ratio. It is
80 * unify that to an 0..100 interval, so the set state in cpuidle_cooling_get_max_state()
83 * The state 100% will make the cluster 100% ... idle. A 0% in cpuidle_cooling_get_max_state()
85 * means for 10ms of idle injection, we have 10ms of running in cpuidle_cooling_get_max_state()
88 *state = 100; in cpuidle_cooling_get_max_state()
|
| /Linux-v5.10/Documentation/devicetree/bindings/phy/ |
| D | ti,phy-j721e-wiz.yaml | 66 typec-dir-debounce-ms:
67 minimum: 100
69 default: 100
72 If not specified, the default debounce of 100ms will be used.
73 Type-C spec states minimum CC pin debounce of 100 ms and maximum
74 of 200 ms. However, some solutions might need more than 200 ms.
|
| /Linux-v5.10/drivers/hid/ |
| D | hid-microsoft.c | 62 struct ms_data *ms = hid_get_drvdata(hdev); in ms_report_fixup() local
63 unsigned long quirks = ms->quirks; in ms_report_fixup()
89 * the MS office kb labelled "Office Home" and "Task Pane". in ms_ergonomy_kb_quirk()
186 struct ms_data *ms = hid_get_drvdata(hdev); in ms_input_mapping() local
187 unsigned long quirks = ms->quirks; in ms_input_mapping()
213 struct ms_data *ms = hid_get_drvdata(hdev); in ms_input_mapped() local
214 unsigned long quirks = ms->quirks; in ms_input_mapped()
225 struct ms_data *ms = hid_get_drvdata(hdev); in ms_event() local
226 unsigned long quirks = ms->quirks; in ms_event()
235 /* Handling MS keyboards special buttons */ in ms_event()
[all …]
|
| /Linux-v5.10/drivers/net/wireless/ti/wl12xx/ |
| D | conf.h | 41 * Range: 0 - 255 (ms)
50 * Range: 0 - 255 (ms)
59 * Range: 0 - 255 (ms)
68 * Range: 0 - 255 (ms)
77 * Range: 0 - 255 (ms)
86 * Range: 0 - 255 (ms)
179 * Range: 0 - 100 (%)
186 * Range: 0 - 100000 (ms)
220 * Range: 0 - 100
227 * Range: 0 - 255 (ms)
[all …]
|
| /Linux-v5.10/tools/testing/selftests/timers/ |
| D | mqueue-lat.c | 36 #define TARGET_TIMEOUT 100000000 /* 100ms in nanoseconds */
37 #define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */
74 count = 100; in mqueue_lat_test()
82 target = timespec_add(now, TARGET_TIMEOUT); /* 100ms */ in mqueue_lat_test()
|
