Home
last modified time | relevance | path

Searched +full:0 +full:xf4000000 (Results 1 – 25 of 67) sorted by relevance

123

/Linux-v5.15/arch/arm/mach-imx/
Dhardware.h21 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0)
35 * whole address space to [0xf4000000, 0xf5ffffff]. So [0xf6000000,0xfeffffff]
41 * IO 0x00200000+0x100000 -> 0xf4000000+0x100000
43 * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
44 * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000
45 * X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000
47 * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
48 * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
49 * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
51 * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
[all …]
/Linux-v5.15/arch/xtensa/boot/dts/
Dvirt.dts14 memory@0 {
16 reg = <0x00000000 0x80000000>;
21 #size-cells = <0>;
22 cpu@0 {
24 reg = <0>;
31 #clock-cells = <0>;
40 * two cells: second cell == 0: internal irq number
43 #address-cells = <0>;
53 #interrupt-cells = <0x1>;
55 bus-range = <0x0 0x3e>;
[all …]
/Linux-v5.15/arch/arm/boot/dts/
Dimx53-ard.dts17 reg = <0x70000000 0x40000000>;
24 reg = <0xf4000000 0x3ff0000>;
29 reg = <0xf4000000 0x2000000>;
32 interrupts = <31 0x8>;
49 #size-cells = <0>;
51 reg_3p3v: regulator@0 {
53 reg = <0>;
66 gpios = <&gpio5 10 0>;
73 gpios = <&gpio5 11 0>;
80 gpios = <&gpio5 12 0>;
[all …]
Dorion5x-kuroboxpro.dts59 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
60 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
61 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>,
62 <MBUS_ID(0x01, 0x1e) 0 0xfc000000 0x1000000>;
67 reg = <0x00000000 0x8000000>;
86 reg = <MBUS_ID(0x01, 0x1e) 0 0x400>;
87 cle = <0>;
96 uImage@0 { /* 4 MB */
97 reg = <0 0x400000>;
102 reg = <0x400000 0x4000000>;
[all …]
Dorion5x-rd88f5182-nas.dts20 reg = <0x00000000 0x4000000>; /* 64 MB */
29 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
30 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
31 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
32 <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
37 pinctrl-0 = <&pmx_debug_led>;
40 led@0 {
43 gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
54 devbus,badr-skew-ps = <0>;
63 flash@0 {
[all …]
Dorion5x-linkstation.dtsi55 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
56 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
57 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
67 #size-cells = <0>;
68 pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>;
109 flash@0 {
111 reg = <0 0x40000>;
119 header@0 {
120 reg = <0 0x30000>;
125 reg = <0x30000 0xF000>;
[all …]
Dorion5x-netgear-wnr854t.dts25 reg = <0x00000000 0x2000000>; /* 32 MB */
33 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
34 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
35 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
40 pinctrl-0 = <&pmx_reset_button>;
52 pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
55 led@0 {
57 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
77 flash@0 {
79 reg = <0 0x800000>;
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/pci/
Dhisilicon,kirin-pcie.yaml64 reg = <0x0 0xf4000000 0x0 0x1000>,
65 <0x0 0xff3fe000 0x0 0x1000>,
66 <0x0 0xf3f20000 0x0 0x40000>,
67 <0x0 0xf5000000 0x0 0x2000>;
69 bus-range = <0x0 0xff>;
73 ranges = <0x02000000 0x0 0x00000000
74 0x0 0xf6000000
75 0x0 0x02000000>;
78 interrupts = <0 283 4>;
80 interrupt-map-mask = <0xf800 0 0 7>;
[all …]
Dhisilicon-histb-pcie.txt38 - phys: List of phandle and phy mode specifier, should be 0.
44 reg = <0xf9860000 0x1000>,
45 <0xf0000000 0x2000>,
46 <0xf2000000 0x01000000>;
51 bus-range = <0 15>;
53 ranges=<0x81000000 0 0 0xf4000000 0 0x00010000
54 0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>;
58 interrupt-map-mask = <0 0 0 0>;
59 interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
65 resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
/Linux-v5.15/arch/arm/mach-s3c/
Dotom.h10 * ok, we've used up to 0x01300000, now we need to find space for the
18 #define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
19 #define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
/Linux-v5.15/arch/sh/include/cpu-sh4/cpu/
Daddrspace.h10 #define P0SEG 0x00000000
11 #define P1SEG 0x80000000
12 #define P2SEG 0xa0000000
13 #define P3SEG 0xc0000000
14 #define P4SEG 0xe0000000
18 #define P4SEG_IC_ADDR 0xf0000000
19 #define P4SEG_IC_DATA 0xf1000000
20 #define P4SEG_ITLB_ADDR 0xf2000000
21 #define P4SEG_ITLB_DATA 0xf3000000
22 #define P4SEG_OC_ADDR 0xf4000000
[all …]
Dcache.h17 #define SH_CCR 0xff00001c /* Address of Cache Control Register */
18 #define CCR_CACHE_OCE 0x0001 /* Operand Cache Enable */
19 #define CCR_CACHE_WT 0x0002 /* Write-Through (for P0,U0,P3) (else writeback)*/
20 #define CCR_CACHE_CB 0x0004 /* Copy-Back (for P1) (else writethrough) */
21 #define CCR_CACHE_OCI 0x0008 /* OC Invalidate */
22 #define CCR_CACHE_ORA 0x0020 /* OC RAM Mode */
23 #define CCR_CACHE_OIX 0x0080 /* OC Index Enable */
24 #define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */
25 #define CCR_CACHE_ICI 0x0800 /* IC Invalidate */
26 #define CCR_CACHE_IIX 0x8000 /* IC Index Enable */
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/mtd/
Dorion-nand.txt9 - cle : Address line number connected to CLE. Default is 0
23 cle = <0>;
28 reg = <0xf4000000 0x400>;
30 partition@0 {
32 reg = <0x0000000 0x100000>;
38 reg = <0x0100000 0x200000>;
43 reg = <0x0300000 0x100000>;
48 reg = <0x0400000 0x7d00000>;
/Linux-v5.15/Documentation/devicetree/bindings/soc/fsl/
Dbman-portals.txt44 ranges = <0 0xf 0xf4000000 0x200000>;
46 bman-portal@0 {
47 compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
48 reg = <0x0 0x4000>, <0x100000 0x1000>;
49 interrupts = <105 2 0 0>;
52 compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
53 reg = <0x4000 0x4000>, <0x101000 0x1000>;
54 interrupts = <107 2 0 0>;
/Linux-v5.15/arch/arm/include/debug/
Dimx.S20 (((x) & 0x80000000) >> 7) | \
21 (0xf4000000 + \
22 (((x) & 0x50000000) >> 6) + \
23 (((x) & 0x0b000000) >> 4) + \
24 (((x) & 0x000fffff))))
35 str \rd, [\rx, #0x40] @ TXDATA
45 1002: ldr \rd, [\rx, #0x98] @ SR2
/Linux-v5.15/Documentation/devicetree/bindings/net/
Dsmsc,lan9115.yaml103 reg = <0xf4000000 0x2000000>;
/Linux-v5.15/arch/powerpc/boot/dts/fsl/
Dcyrus_p5020.dts30 size = <0 0x1000000>;
31 alignment = <0 0x1000000>;
34 size = <0 0x400000>;
35 alignment = <0 0x400000>;
38 size = <0 0x2000000>;
39 alignment = <0 0x2000000>;
44 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
48 ranges = <0x0 0xf 0xf4000000 0x200000>;
52 ranges = <0x0 0xf 0xf4200000 0x200000>;
56 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
[all …]
Doca4080.dts58 size = <0 0x1000000>;
59 alignment = <0 0x1000000>;
62 size = <0 0x400000>;
63 alignment = <0 0x400000>;
66 size = <0 0x2000000>;
67 alignment = <0 0x2000000>;
72 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
76 ranges = <0x0 0xf 0xf4000000 0x200000>;
80 ranges = <0x0 0xf 0xf4200000 0x200000>;
84 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
[all …]
Dkmcoge4.dts30 size = <0 0x1000000>;
31 alignment = <0 0x1000000>;
34 size = <0 0x400000>;
35 alignment = <0 0x400000>;
38 size = <0 0x2000000>;
39 alignment = <0 0x2000000>;
44 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
48 ranges = <0x0 0xf 0xf4000000 0x200000>;
52 ranges = <0x0 0xf 0xf4200000 0x200000>;
56 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
[all …]
Dt208xrdb.dtsi48 size = <0 0x1000000>;
49 alignment = <0 0x1000000>;
52 size = <0 0x400000>;
53 alignment = <0 0x400000>;
56 size = <0 0x2000000>;
57 alignment = <0 0x2000000>;
62 reg = <0xf 0xfe124000 0 0x2000>;
63 ranges = <0 0 0xf 0xe8000000 0x08000000
64 2 0 0xf 0xff800000 0x00010000
65 3 0 0xf 0xffdf0000 0x00008000>;
[all …]
Dt1023rdb.dts50 size = <0 0x1000000>;
51 alignment = <0 0x1000000>;
55 size = <0 0x400000>;
56 alignment = <0 0x400000>;
60 size = <0 0x2000000>;
61 alignment = <0 0x2000000>;
66 reg = <0xf 0xfe124000 0 0x2000>;
67 ranges = <0 0 0xf 0xe8000000 0x08000000
68 1 0 0xf 0xff800000 0x00010000>;
70 nor@0,0 {
[all …]
/Linux-v5.15/arch/arm/mach-orion5x/
Dwnr854t-setup.c27 MPP0_GPIO, /* Power LED green (0=on) */
28 MPP1_GPIO, /* Reset Button (0=off) */
29 MPP2_GPIO, /* Power LED blink (0=off) */
30 MPP3_GPIO, /* WAN Status LED amber (0=off) */
47 0,
53 #define WNR854T_NOR_BOOT_BASE 0xf4000000
59 .offset = 0x00000000,
60 .size = 0x00100000,
63 .offset = 0x00100000,
64 .size = 0x00660000,
[all …]
Dwrt350n-v2-setup.c35 .gpio = 0,
94 .num_resources = 0,
104 MPP0_GPIO, /* Power LED green (0=on) */
105 MPP1_GPIO, /* Security LED (0=on) */
106 MPP2_GPIO, /* Internal Button (0=on) */
107 MPP3_GPIO, /* Reset Button (0=on) */
109 MPP5_GPIO, /* Power LED orange (0=on) */
110 MPP6_GPIO, /* USB LED (0=on) */
111 MPP7_GPIO, /* Wireless LED (0=on) */
124 0,
[all …]
/Linux-v5.15/arch/arm/mach-pxa/include/mach/
Dhardware.h19 #define UNCACHED_PHYS_0 0xfe000000
20 #define UNCACHED_PHYS_0_SIZE 0x00100000
25 * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
26 * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
27 * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
28 * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
29 * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
30 * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
31 * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
36 #define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
[all …]
/Linux-v5.15/tools/testing/selftests/powerpc/include/
Dinstructions.h10 (0x7c00060c | (RA) << (31-15) | (RB) << (31-20) | (L) << (31-10))
16 asm volatile(str(COPY(0, %0, 0))";" in copy()
25 asm volatile(str(COPY(0, %0, 1))";" in copy_first()
34 (0x7c00070c | (RA) << (31-15) | (RB) << (31-20) | (L) << (31-10) | (RC) << (31-31))
42 asm volatile(str(PASTE(0, %1, 0, 0))";" in paste()
43 "mfcr %0;" in paste()
55 asm volatile(str(PASTE(0, %1, 1, 1))";" in paste_last()
56 "mfcr %0;" in paste_last()
64 #define PPC_INST_COPY __COPY(0, 0, 0)
65 #define PPC_INST_COPY_FIRST __COPY(0, 0, 1)
[all …]

123