/Linux-v5.15/Documentation/devicetree/bindings/pci/ |
D | microchip,pcie-host.yaml | 66 reg = <0x0 0x70000000 0x0 0x08000000>, 67 <0x0 0x43000000 0x0 0x00010000>; 74 interrupt-map-mask = <0x0 0x0 0x0 0x7>; 75 interrupt-map = <0 0 0 1 &pcie_intc0 0>, 76 <0 0 0 2 &pcie_intc0 1>, 77 <0 0 0 3 &pcie_intc0 2>, 78 <0 0 0 4 &pcie_intc0 3>; 82 bus-range = <0x00 0x7f>; 83 ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>; 85 #address-cells = <0>;
|
/Linux-v5.15/arch/arm/mach-footbridge/include/mach/ |
D | hardware.h | 13 * 0xff800000 0x40000000 1MB X-Bus 14 * 0xff000000 0x7c000000 1MB PCI I/O space 15 * 0xfe000000 0x42000000 1MB CSR 16 * 0xfd000000 0x78000000 1MB Outbound write flush (not supported) 17 * 0xfc000000 0x79000000 1MB PCI IACK/special space 18 * 0xfb000000 0x7a000000 16MB PCI Config type 1 19 * 0xfa000000 0x7b000000 16MB PCI Config type 0 20 * 0xf9000000 0x50000000 1MB Cache flush 21 * 0xf0000000 0x80000000 16MB ISA memory 30 #define XBUS_SIZE 0x00100000 [all …]
|
/Linux-v5.15/arch/arm/mach-sa1100/ |
D | pci-nanoengine.c | 22 if (bus->number != 0 || (devfn >> 3) != 0) in nanoengine_pci_map_bus() 42 DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO"); 62 pci 0000:00:00.0: [8086:1209] type 0 class 0x000200 63 pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff] 64 pci 0000:00:00.0: reg 14: [io 0x0000-0x003f] 65 pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff] 66 pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref] 71 pci 0000:00:00.0: BAR 6: can't assign mem pref (size 0x100000) 72 pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff] 73 pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff]) [all …]
|
/Linux-v5.15/arch/arm64/boot/dts/ti/ |
D | k3-am64.dtsi | 66 ranges = <0x00 0x000f4000 0x00 0x000f4000 0x00 0x000002d0>, /* PINCTRL */ 67 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ 68 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ 69 <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */ 70 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ 71 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */ 72 <0x00 0x0f000000 0x00 0x0f000000 0x00 0x00c44200>, /* Second peripheral window */ 73 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ 74 <0x00 0x30000000 0x00 0x30000000 0x00 0x000bc100>, /* ICSSG0/1 */ 75 <0x00 0x37000000 0x00 0x37000000 0x00 0x00040000>, /* TIMERMGR0 TIMERS */ [all …]
|
/Linux-v5.15/arch/arm64/boot/dts/renesas/ |
D | r9a07g044l2-smarc.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>;
|
D | r8a77965-salvator-x.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>; 30 clock-names = "du.0", "du.1", "du.3", 31 "dclkin.0", "dclkin.1", "dclkin.3";
|
D | r8a77965-ulcb.dts | 20 reg = <0x0 0x48000000 0x0 0x78000000>; 31 clock-names = "du.0", "du.1", "du.3", 32 "dclkin.0", "dclkin.1", "dclkin.3";
|
D | r8a77965-salvator-xs.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>; 30 clock-names = "du.0", "du.1", "du.3", 31 "dclkin.0", "dclkin.1", "dclkin.3";
|
D | r8a774a1-hihope-rzg2m-rev2.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>; 24 reg = <0x6 0x00000000 0x0 0x80000000>; 35 clock-names = "du.0", "du.1", "du.2", 36 "dclkin.0", "dclkin.1", "dclkin.2";
|
D | r8a774a1-hihope-rzg2m.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>; 24 reg = <0x6 0x00000000 0x0 0x80000000>; 35 clock-names = "du.0", "du.1", "du.2", 36 "dclkin.0", "dclkin.1", "dclkin.2";
|
D | r8a77960-salvator-x.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>; 24 reg = <0x6 0x00000000 0x0 0x80000000>; 35 clock-names = "du.0", "du.1", "du.2", 36 "dclkin.0", "dclkin.1", "dclkin.2";
|
D | r8a77960-salvator-xs.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>; 24 reg = <0x6 0x00000000 0x0 0x80000000>; 35 clock-names = "du.0", "du.1", "du.2", 36 "dclkin.0", "dclkin.1", "dclkin.2";
|
D | r8a774e1-hihope-rzg2h.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>; 24 reg = <0x5 0x00000000 0x0 0x80000000>; 35 clock-names = "du.0", "du.1", "du.3", 36 "dclkin.0", "dclkin.1", "dclkin.3";
|
D | r8a77961-ulcb.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>; 24 reg = <0x4 0x80000000 0x0 0x80000000>; 29 reg = <0x6 0x00000000 0x1 0x00000000>; 40 clock-names = "du.0", "du.1", "du.2", 41 "dclkin.0", "dclkin.1", "dclkin.2";
|
D | r8a774b1-hihope-rzg2n-rev2.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>; 24 reg = <0x4 0x80000000 0x0 0x80000000>; 35 clock-names = "du.0", "du.1", "du.3", 36 "dclkin.0", "dclkin.1", "dclkin.3";
|
D | r8a774b1-hihope-rzg2n.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>; 24 reg = <0x4 0x80000000 0x0 0x80000000>; 35 clock-names = "du.0", "du.1", "du.3", 36 "dclkin.0", "dclkin.1", "dclkin.3";
|
D | r8a77961-salvator-xs.dts | 19 reg = <0x0 0x48000000 0x0 0x78000000>; 24 reg = <0x4 0x80000000 0x0 0x80000000>; 29 reg = <0x6 0x00000000 0x1 0x00000000>; 40 clock-names = "du.0", "du.1", "du.2", 41 "dclkin.0", "dclkin.1", "dclkin.2";
|
D | r8a779m3-salvator-xs.dts | 23 reg = <0x0 0x48000000 0x0 0x78000000>; 28 reg = <0x4 0x80000000 0x0 0x80000000>; 33 reg = <0x6 0x00000000 0x1 0x00000000>; 44 clock-names = "du.0", "du.1", "du.2", 45 "dclkin.0", "dclkin.1", "dclkin.2";
|
D | r8a779m3-ulcb.dts | 22 reg = <0x0 0x48000000 0x0 0x78000000>; 27 reg = <0x4 0x80000000 0x0 0x80000000>; 32 reg = <0x6 0x00000000 0x1 0x00000000>; 43 clock-names = "du.0", "du.1", "du.2", 44 "dclkin.0", "dclkin.1", "dclkin.2";
|
D | r8a779a0-falcon-cpu.dtsi | 51 reg = <0x0 0x48000000 0x0 0x78000000>; 56 reg = <0x5 0x00000000 0x0 0x80000000>; 61 reg = <0x6 0x00000000 0x0 0x80000000>; 66 reg = <0x7 0x00000000 0x0 0x80000000>; 97 pinctrl-0 = <&i2c0_pins>; 106 reg = <0x50>; 112 pinctrl-0 = <&i2c1_pins>; 120 pinctrl-0 = <&i2c6_pins>; 128 pinctrl-0 = <&mmc_pins>; 145 pinctrl-0 = <&scif_clk_pins>; [all …]
|
/Linux-v5.15/drivers/net/ethernet/dec/tulip/ |
D | pnic.c | 23 u32 phy_reg = ioread32(ioaddr + 0xB8); in pnic_do_nway() 24 u32 new_csr6 = tp->csr6 & ~0x40C40200; in pnic_do_nway() 26 if (phy_reg & 0x78000000) { /* Ignore baseT4 */ in pnic_do_nway() 27 if (phy_reg & 0x20000000) dev->if_port = 5; in pnic_do_nway() 28 else if (phy_reg & 0x40000000) dev->if_port = 3; in pnic_do_nway() 29 else if (phy_reg & 0x10000000) dev->if_port = 4; in pnic_do_nway() 30 else if (phy_reg & 0x08000000) dev->if_port = 0; in pnic_do_nway() 32 new_csr6 = (dev->if_port & 1) ? 0x01860000 : 0x00420000; in pnic_do_nway() 33 iowrite32(0x32 | (dev->if_port & 1), ioaddr + CSR12); in pnic_do_nway() 35 iowrite32(0x1F868, ioaddr + 0xB8); in pnic_do_nway() [all …]
|
/Linux-v5.15/arch/sparc/include/asm/ |
D | pcr.h | 19 #define PCR_PIC_PRIV 0x00000001 /* PIC access is privileged */ 20 #define PCR_STRACE 0x00000002 /* Trace supervisor events */ 21 #define PCR_UTRACE 0x00000004 /* Trace user events */ 22 #define PCR_N2_HTRACE 0x00000008 /* Trace hypervisor events */ 23 #define PCR_N2_TOE_OV0 0x00000010 /* Trap if PIC 0 overflows */ 24 #define PCR_N2_TOE_OV1 0x00000020 /* Trap if PIC 1 overflows */ 25 #define PCR_N2_MASK0 0x00003fc0 27 #define PCR_N2_SL0 0x0003c000 29 #define PCR_N2_OV0 0x00040000 30 #define PCR_N2_MASK1 0x07f80000 [all …]
|
/Linux-v5.15/drivers/staging/wfx/ |
D | hwio.h | 30 #define CFG_ERR_SPI_FRAME 0x00000001 // only with SPI 31 #define CFG_ERR_SDIO_BUF_MISMATCH 0x00000001 // only with SDIO 32 #define CFG_ERR_BUF_UNDERRUN 0x00000002 33 #define CFG_ERR_DATA_IN_TOO_LARGE 0x00000004 34 #define CFG_ERR_HOST_NO_OUT_QUEUE 0x00000008 35 #define CFG_ERR_BUF_OVERRUN 0x00000010 36 #define CFG_ERR_DATA_OUT_TOO_LARGE 0x00000020 37 #define CFG_ERR_HOST_NO_IN_QUEUE 0x00000040 38 #define CFG_ERR_HOST_CRC_MISS 0x00000080 // only with SDIO 39 #define CFG_SPI_IGNORE_CS 0x00000080 // only with SPI [all …]
|
/Linux-v5.15/arch/powerpc/include/asm/ |
D | disassemble.h | 21 return (inst >> 1) & 0x3ff; in get_xop() 26 return ((inst >> 16) & 0x1f) | ((inst >> 6) & 0x3e0); in get_sprn() 31 return ((inst >> 16) & 0x1f) | ((inst >> 6) & 0x3e0); in get_dcrn() 36 return ((inst >> 16) & 0x1f) | ((inst >> 6) & 0x3e0); in get_tmrn() 41 return (inst >> 21) & 0x1f; in get_rt() 46 return (inst >> 21) & 0x1f; in get_rs() 51 return (inst >> 16) & 0x1f; in get_ra() 56 return (inst >> 11) & 0x1f; in get_rb() 61 return inst & 0x1; in get_rc() 66 return (inst >> 11) & 0x1f; in get_ws() [all …]
|
/Linux-v5.15/drivers/media/platform/qcom/venus/ |
D | hfi_venus_io.h | 9 #define VBIF_BASE 0x80000 11 #define VBIF_AXI_HALT_CTRL0 0x208 12 #define VBIF_AXI_HALT_CTRL1 0x20c 14 #define VBIF_AXI_HALT_CTRL0_HALT_REQ BIT(0) 15 #define VBIF_AXI_HALT_CTRL1_HALT_ACK BIT(0) 18 #define CPU_BASE 0xc0000 20 #define CPU_CS_BASE (CPU_BASE + 0x12000) 21 #define CPU_IC_BASE (CPU_BASE + 0x1f000) 22 #define CPU_BASE_V6 0xa0000 24 #define CPU_IC_BASE_V6 (CPU_BASE_V6 + 0x138) [all …]
|