Home
last modified time | relevance | path

Searched +full:0 +full:x36000 (Results 1 – 25 of 25) sorted by relevance

/Linux-v5.15/drivers/misc/habanalabs/include/goya/asic_reg/
Dgoya_blocks.h16 #define mmPCI_NRTR_BASE 0x7FFC000000ull
17 #define PCI_NRTR_MAX_OFFSET 0x608
18 #define PCI_NRTR_SECTION 0x4000
19 #define mmPCI_RD_REGULATOR_BASE 0x7FFC004000ull
20 #define PCI_RD_REGULATOR_MAX_OFFSET 0x74
21 #define PCI_RD_REGULATOR_SECTION 0x1000
22 #define mmPCI_WR_REGULATOR_BASE 0x7FFC005000ull
23 #define PCI_WR_REGULATOR_MAX_OFFSET 0x74
24 #define PCI_WR_REGULATOR_SECTION 0x3B000
25 #define mmMME1_RTR_BASE 0x7FFC040000ull
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/phy/
Damlogic,meson-g12a-usb2-phy.yaml37 const: 0
72 reg = <0x36000 0x2000>;
77 #phy-cells = <0>;
/Linux-v5.15/Documentation/devicetree/bindings/net/dsa/
Dbrcm,b53.yaml125 #size-cells = <0>;
133 #size-cells = <0>;
135 port@0 {
136 reg = <0>;
178 reg = <0x36000 0x1000>,
179 <0x3f308 0x8>,
180 <0x3f410 0xc>;
211 #size-cells = <0>;
213 port@0 {
215 reg = <0>;
/Linux-v5.15/drivers/misc/habanalabs/include/gaudi/asic_reg/
Dgaudi_blocks.h16 #define mmNIC0_PHY0_BASE 0x0ull
17 #define NIC0_PHY0_MAX_OFFSET 0x9F13
18 #define mmMME0_ACC_BASE 0x7FFC020000ull
19 #define MME0_ACC_MAX_OFFSET 0x5C00
20 #define MME0_ACC_SECTION 0x20000
21 #define mmMME0_SBAB_BASE 0x7FFC040000ull
22 #define MME0_SBAB_MAX_OFFSET 0x5800
23 #define MME0_SBAB_SECTION 0x1000
24 #define mmMME0_PRTN_BASE 0x7FFC041000ull
25 #define MME0_PRTN_MAX_OFFSET 0x5000
[all …]
/Linux-v5.15/drivers/net/wireless/ath/ath10k/
Dcoredump.c18 {0x800, 0x810},
19 {0x820, 0x82C},
20 {0x830, 0x8F4},
21 {0x90C, 0x91C},
22 {0xA14, 0xA18},
23 {0xA84, 0xA94},
24 {0xAA8, 0xAD4},
25 {0xADC, 0xB40},
26 {0x1000, 0x10A4},
27 {0x10BC, 0x111C},
[all …]
/Linux-v5.15/drivers/gpu/drm/msm/disp/mdp5/
Dmdp5_cfg.c22 0,
35 .base = { 0x00500, 0x00600, 0x00700, 0x00800, 0x00900 },
36 .flush_hw_mask = 0x0003ffff,
40 .base = { 0x01100, 0x01500, 0x01900 },
45 0,
49 .base = { 0x01d00, 0x02100, 0x02500 },
53 0,
57 .base = { 0x02900, 0x02d00 },
60 0,
64 .base = { 0x03100, 0x03500, 0x03900, 0x03d00, 0x04100 },
[all …]
/Linux-v5.15/arch/arm/boot/dts/
Dbcm-nsp.dtsi54 #size-cells = <0>;
56 cpu0: cpu@0 {
60 reg = <0x0>;
68 secondary-boot-reg = <0xffff0fec>;
69 reg = <0x1>;
82 ranges = <0x00000000 0x19000000 0x00023000>;
86 a9pll: arm_clk@0 {
87 #clock-cells = <0>;
90 reg = <0x00000 0x1000>;
95 reg = <0x20200 0x100>;
[all …]
Domap4-l4.dtsi2 &l4_cfg { /* 0x4a000000 */
5 clocks = <&l4_cfg_clkctrl OMAP4_L4_CFG_CLKCTRL 0>;
7 reg = <0x4a000000 0x800>,
8 <0x4a000800 0x800>,
9 <0x4a001000 0x1000>;
13 ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */
14 <0x00080000 0x4a080000 0x080000>, /* segment 1 */
15 <0x00100000 0x4a100000 0x080000>, /* segment 2 */
16 <0x00180000 0x4a180000 0x080000>, /* segment 3 */
17 <0x00200000 0x4a200000 0x080000>, /* segment 4 */
[all …]
Domap5-l4.dtsi1 &l4_cfg { /* 0x4a000000 */
4 clocks = <&l4cfg_clkctrl OMAP5_L4_CFG_CLKCTRL 0>;
6 reg = <0x4a000000 0x800>,
7 <0x4a000800 0x800>,
8 <0x4a001000 0x1000>;
12 ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */
13 <0x00080000 0x4a080000 0x080000>, /* segment 1 */
14 <0x00100000 0x4a100000 0x080000>, /* segment 2 */
15 <0x00180000 0x4a180000 0x080000>, /* segment 3 */
16 <0x00200000 0x4a200000 0x080000>, /* segment 4 */
[all …]
Ddra7-l4.dtsi1 &l4_cfg { /* 0x4a000000 */
4 clocks = <&l4cfg_clkctrl DRA7_L4CFG_L4_CFG_CLKCTRL 0>;
6 reg = <0x4a000000 0x800>,
7 <0x4a000800 0x800>,
8 <0x4a001000 0x1000>;
12 ranges = <0x00000000 0x4a000000 0x100000>, /* segment 0 */
13 <0x00100000 0x4a100000 0x100000>, /* segment 1 */
14 <0x00200000 0x4a200000 0x100000>; /* segment 2 */
16 segment@0 { /* 0x4a000000 */
20 ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
[all …]
Dam437x-l4.dtsi1 &l4_wkup { /* 0x44c00000 */
4 clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_L4_WKUP_CLKCTRL 0>;
6 reg = <0x44c00000 0x800>,
7 <0x44c00800 0x800>,
8 <0x44c01000 0x400>,
9 <0x44c01400 0x400>;
13 ranges = <0x00000000 0x44c00000 0x100000>, /* segment 0 */
14 <0x00100000 0x44d00000 0x100000>, /* segment 1 */
15 <0x00200000 0x44e00000 0x100000>; /* segment 2 */
17 segment@0 { /* 0x44c00000 */
[all …]
/Linux-v5.15/arch/arm64/boot/dts/amlogic/
Dmeson-g12-common.dtsi106 reg = <0x0 0x05000000 0x0 0x300000>;
113 size = <0x0 0x10000000>;
114 alignment = <0x0 0x400000>;
131 reg = <0x0 0xfc000000 0x0 0x400000>,
132 <0x0 0xff648000 0x0 0x2000>,
133 <0x0 0xfc400000 0x0 0x200000>;
137 interrupt-map-mask = <0 0 0 0>;
138 interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
139 bus-range = <0x0 0xff>;
143 ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>,
[all …]
/Linux-v5.15/drivers/clk/qcom/
Dgcc-msm8998.c39 { P_XO, 0 },
53 { P_XO, 0 },
65 { P_XO, 0 },
81 { P_XO, 0 },
93 { P_XO, 0 },
107 { P_XO, 0 },
132 { 250000000, 2000000000, 0 },
137 .offset = 0x0,
142 .enable_reg = 0x52000,
143 .enable_mask = BIT(0),
[all …]
Dgcc-sm8250.c36 .offset = 0x0,
39 .enable_reg = 0x52018,
40 .enable_mask = BIT(0),
53 { 0x1, 2 },
58 .offset = 0x0,
75 .offset = 0x76000,
78 .enable_reg = 0x52018,
92 .offset = 0x1c000,
95 .enable_reg = 0x52018,
109 { P_BI_TCXO, 0 },
[all …]
Dgcc-sdm845.c38 .offset = 0x0,
41 .enable_reg = 0x52000,
42 .enable_mask = BIT(0),
55 .offset = 0x76000,
58 .enable_reg = 0x52000,
72 { 0x0, 1 },
73 { 0x1, 2 },
74 { 0x3, 4 },
75 { 0x7, 8 },
80 .offset = 0x0,
[all …]
Dgcc-msm8996.c50 { P_XO, 0 },
60 { P_XO, 0 },
70 { P_XO, 0 },
82 { P_XO, 0 },
94 { P_XO, 0 },
106 { P_XO, 0 },
120 { P_XO, 0 },
134 { P_XO, 0 },
152 { P_XO, 0 },
183 .offset = 0x00000,
[all …]
Dgcc-sm8150.c38 .offset = 0x0,
41 .enable_reg = 0x52000,
42 .enable_mask = BIT(0),
56 { 0x0, 1 },
57 { 0x1, 2 },
58 { 0x3, 4 },
59 { 0x7, 8 },
64 .offset = 0x0,
81 .offset = 0x1a000,
84 .enable_reg = 0x52000,
[all …]
Dgcc-sc8180x.c44 { 249600000, 2000000000, 0 },
48 .offset = 0x0,
53 .enable_reg = 0x52000,
54 .enable_mask = BIT(0),
67 { 0x0, 1 },
68 { 0x1, 2 },
69 { 0x3, 4 },
70 { 0x7, 8 },
75 .offset = 0x0,
90 .offset = 0x1000,
[all …]
/Linux-v5.15/drivers/net/ethernet/broadcom/bnx2x/
Dbnx2x_dump.h22 #define DRV_DUMP_XSTORM_WAITP_ADDRESS 0x2b8a80
23 #define DRV_DUMP_TSTORM_WAITP_ADDRESS 0x1b8a80
24 #define DRV_DUMP_USTORM_WAITP_ADDRESS 0x338a80
25 #define DRV_DUMP_CSTORM_WAITP_ADDRESS 0x238a80
45 #define BNX2X_DUMP_VERSION 0x61111111
65 static const u32 page_vals_e2[] = {0, 128};
68 {0x58000, 4608, DUMP_CHIP_E2, 0x30}
74 static const u32 page_vals_e3[] = {0, 128};
77 {0x58000, 4608, DUMP_CHIP_E3A0 | DUMP_CHIP_E3B0, 0x30}
81 { 0x2000, 1, 0x1f, 0xfff},
[all …]
/Linux-v5.15/drivers/gpu/drm/amd/include/asic_reg/gc/
Dgc_9_4_2_offset.h29 // base address: 0x0
30 …DIDT_SQ_CTRL0 0x0000
31 …DIDT_SQ_CTRL2 0x0002
32 …DIDT_SQ_STALL_CTRL 0x0004
33 …DIDT_SQ_TUNING_CTRL 0x0005
34 …DIDT_SQ_STALL_AUTO_RELEASE_CTRL 0x0006
35 …DIDT_SQ_CTRL3 0x0007
36 …DIDT_SQ_STALL_PATTERN_1_2 0x0008
37 …DIDT_SQ_STALL_PATTERN_3_4 0x0009
38 …DIDT_SQ_STALL_PATTERN_5_6 0x000a
[all …]
Dgc_9_1_offset.h24 …SQ_DEBUG_STS_GLOBAL 0x0309
25 …ne mmSQ_DEBUG_STS_GLOBAL_BASE_IDX 0
26 …SQ_DEBUG_STS_GLOBAL2 0x0310
27 …ne mmSQ_DEBUG_STS_GLOBAL2_BASE_IDX 0
28 …SQ_DEBUG_STS_GLOBAL3 0x0311
29 …ne mmSQ_DEBUG_STS_GLOBAL3_BASE_IDX 0
32 // base address: 0x8000
33 …GRBM_CNTL 0x0000
34 …ne mmGRBM_CNTL_BASE_IDX 0
35 …GRBM_SKEW_CNTL 0x0001
[all …]
Dgc_9_2_1_offset.h24 …SQ_DEBUG_STS_GLOBAL 0x0309
25 …ne mmSQ_DEBUG_STS_GLOBAL_BASE_IDX 0
26 …SQ_DEBUG_STS_GLOBAL2 0x0310
27 …ne mmSQ_DEBUG_STS_GLOBAL2_BASE_IDX 0
28 …SQ_DEBUG_STS_GLOBAL3 0x0311
29 …ne mmSQ_DEBUG_STS_GLOBAL3_BASE_IDX 0
32 // base address: 0x8000
33 …GRBM_CNTL 0x0000
34 …ne mmGRBM_CNTL_BASE_IDX 0
35 …GRBM_SKEW_CNTL 0x0001
[all …]
Dgc_9_0_offset.h24 …SQ_DEBUG_STS_GLOBAL 0x0309
25 …ne mmSQ_DEBUG_STS_GLOBAL_BASE_IDX 0
26 …SQ_DEBUG_STS_GLOBAL2 0x0310
27 …ne mmSQ_DEBUG_STS_GLOBAL2_BASE_IDX 0
28 …SQ_DEBUG_STS_GLOBAL3 0x0311
29 …ne mmSQ_DEBUG_STS_GLOBAL3_BASE_IDX 0
32 // base address: 0x8000
33 …GRBM_CNTL 0x0000
34 …ne mmGRBM_CNTL_BASE_IDX 0
35 …GRBM_SKEW_CNTL 0x0001
[all …]
Dgc_10_1_0_offset.h24 …SQ_DEBUG_STS_GLOBAL 0x10A9
25 …ne mmSQ_DEBUG_STS_GLOBAL_BASE_IDX 0
26 …SQ_DEBUG_STS_GLOBAL2 0x10B0
27 …ne mmSQ_DEBUG_STS_GLOBAL2_BASE_IDX 0
30 // base address: 0x4980
31 …SDMA0_DEC_START 0x0000
32 …ne mmSDMA0_DEC_START_BASE_IDX 0
33 …SDMA0_PG_CNTL 0x0016
34 …ne mmSDMA0_PG_CNTL_BASE_IDX 0
35 …SDMA0_PG_CTX_LO 0x0017
[all …]
Dgc_10_3_0_offset.h25 …SQ_DEBUG_STS_GLOBAL 0x10A9
26 …ne mmSQ_DEBUG_STS_GLOBAL_BASE_IDX 0
27 …SQ_DEBUG_STS_GLOBAL2 0x10B0
28 …ne mmSQ_DEBUG_STS_GLOBAL2_BASE_IDX 0
31 // base address: 0x4980
32 …SDMA0_DEC_START 0x0000
33 …ne mmSDMA0_DEC_START_BASE_IDX 0
34 …SDMA0_GLOBAL_TIMESTAMP_LO 0x000f
35 …ne mmSDMA0_GLOBAL_TIMESTAMP_LO_BASE_IDX 0
36 …SDMA0_GLOBAL_TIMESTAMP_HI 0x0010
[all …]