Home
last modified time | relevance | path

Searched +full:0 +full:x3400 (Results 1 – 25 of 80) sorted by relevance

1234

/Linux-v6.6/drivers/accel/habanalabs/include/gaudi/asic_reg/
Dgaudi_blocks.h16 #define mmNIC0_PHY0_BASE 0x0ull
17 #define NIC0_PHY0_MAX_OFFSET 0x9F13
18 #define mmMME0_ACC_BASE 0x7FFC020000ull
19 #define MME0_ACC_MAX_OFFSET 0x5C00
20 #define MME0_ACC_SECTION 0x20000
21 #define mmMME0_SBAB_BASE 0x7FFC040000ull
22 #define MME0_SBAB_MAX_OFFSET 0x5800
23 #define MME0_SBAB_SECTION 0x1000
24 #define mmMME0_PRTN_BASE 0x7FFC041000ull
25 #define MME0_PRTN_MAX_OFFSET 0x5000
[all …]
/Linux-v6.6/arch/arm/boot/dts/aspeed/
Dibm-power9-dual.dtsi5 cfam@0,0 {
6 reg = <0 0>;
9 chip-id = <0>;
13 reg = <0x1000 0x400>;
18 reg = <0x1800 0x400>;
20 #size-cells = <0>;
22 cfam0_i2c0: i2c-bus@0 {
23 reg = <0>;
85 reg = <0x2400 0x400>;
87 #size-cells = <0>;
[all …]
Dibm-power10-dual.dtsi8 #size-cells = <0>;
10 cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
12 cfam@0,0 {
13 reg = <0 0>;
16 chip-id = <0>;
20 reg = <0x1000 0x400>;
25 reg = <0x1800 0x400>;
27 #size-cells = <0>;
29 cfam0_i2c0: i2c-bus@0 {
31 #size-cells = <0>;
[all …]
Daspeed-bmc-opp-palmetto.dts17 reg = <0x40000000 0x20000000>;
27 reg = <0x5f000000 0x01000000>; /* 16M */
31 reg = <0x5ee00000 0x00200000>;
37 reg = <0x5C000000 0x02000000>; /* 32MB */
60 #size-cells = <0>;
69 enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
86 flash@0 {
98 pinctrl-0 = <&pinctrl_spi1debug_default>;
100 flash@0 {
110 pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default
[all …]
Daspeed-bmc-opp-tacoma.dts21 reg = <0x80000000 0x40000000>;
31 reg = <0xb8000000 0x4000000>; /* 64M */
36 reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
37 record-size = <0x8000>;
38 console-size = <0x8000>;
39 pmsg-size = <0x8000>;
46 reg = <0xbf000000 0x01000000>; /* 16M */
97 io-channels = <&dps 0>;
142 flash@0 {
161 pinctrl-0 = <&pinctrl_spi1_default>;
[all …]
Dibm-power10-quad.dtsi9 reg = <0x20>;
11 #size-cells = <0>;
13 cfam@0,0 {
14 reg = <0 0>;
17 chip-id = <0>;
21 reg = <0x1000 0x400>;
26 reg = <0x2400 0x400>;
28 #size-cells = <0>;
37 reg = <0x20>;
39 #size-cells = <0>;
[all …]
/Linux-v6.6/include/dt-bindings/pinctrl/
Ddra.h13 #define MUX_MODE0 0x0
14 #define MUX_MODE1 0x1
15 #define MUX_MODE2 0x2
16 #define MUX_MODE3 0x3
17 #define MUX_MODE4 0x4
18 #define MUX_MODE5 0x5
19 #define MUX_MODE6 0x6
20 #define MUX_MODE7 0x7
21 #define MUX_MODE8 0x8
22 #define MUX_MODE9 0x9
[all …]
/Linux-v6.6/arch/arm64/boot/dts/qcom/
Dpmk8350.dtsi13 #define PMK8350_SID 0
21 mode-recovery = <0x01>;
22 mode-bootloader = <0x02>;
31 #size-cells = <0>;
35 reg = <0x1300>, <0x800>;
40 interrupts = <PMK8350_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
47 interrupts = <PMK8350_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
54 reg = <0x3100>;
56 #size-cells = <0>;
57 interrupts = <PMK8350_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
[all …]
Dpm8998.dtsi35 pm8998_lsid0: pmic@0 {
37 reg = <0x0 SPMI_USID>;
39 #size-cells = <0>;
44 reg = <0x800>;
45 mode-bootloader = <0x2>;
46 mode-recovery = <0x1>;
50 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
58 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
67 reg = <0x2400>;
68 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
[all …]
Dsc8280xp-pmics.dtsi14 polling-delay = <0>;
20 hysteresis = <0>;
26 hysteresis = <0>;
34 polling-delay = <0>;
40 hysteresis = <0>;
46 hysteresis = <0>;
55 pmk8280: pmic@0 {
57 reg = <0x0 SPMI_USID>;
59 #size-cells = <0>;
63 reg = <0x1300>, <0x800>;
[all …]
/Linux-v6.6/drivers/gpu/drm/mediatek/
Dmtk_dp_reg.h9 #define SEC_OFFSET 0x4000
15 /* offset: 0x0 */
16 #define DP_PHY_GLB_BIAS_GEN_00 0x0
18 #define DP_PHY_GLB_DPAUX_TX 0x8
20 #define MTK_DP_0034 0x34
36 #define DA_XTP_GLB_LDO_EN_FORCE_EN BIT(0)
37 #define DP_PHY_LANE_TX_0 0x104
40 #define DP_PHY_LANE_TX_1 0x204
43 #define DP_PHY_LANE_TX_2 0x304
46 #define DP_PHY_LANE_TX_3 0x404
[all …]
/Linux-v6.6/Documentation/devicetree/bindings/phy/
Dqcom,msm8996-qmp-pcie-phy.yaml57 "^phy@[0-9a-f]+$":
92 const: 0
98 const: 0
130 reg = <0x34000 0x488>;
133 ranges = <0x0 0x34000 0x4000>;
149 reg = <0x1000 0x130>,
150 <0x1200 0x200>,
151 <0x1400 0x1dc>;
156 #clock-cells = <0>;
159 #phy-cells = <0>;
[all …]
Dmediatek,xsphy.yaml20 u2 port0 0x0000 MISC
21 0x0100 FMREG
22 0x0300 U2PHY_COM
23 u2 port1 0x1000 MISC
24 0x1100 FMREG
25 0x1300 U2PHY_COM
26 u2 port2 0x2000 MISC
28 u31 common 0x3000 DIG_GLB
29 0x3100 PHYA_GLB
30 u31 port0 0x3400 DIG_LN_TOP
[all …]
/Linux-v6.6/Documentation/devicetree/bindings/thermal/
Dqcom-spmi-adc-tm-hc.yaml31 const: 0
55 "^([-a-z0-9]*)@[0-7]$":
63 minimum: 0
76 channel will be calibrated with 0V and 1.25V reference channels,
81 enum: [0, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 6000, 8000, 10000]
119 #size-cells = <0>;
121 reg = <0x3100>;
124 #size-cells = <0>;
135 reg = <0x3400>;
136 interrupts = <0x2 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
[all …]
Dqcom-spmi-adc-tm5.yaml34 const: 0
60 "^([-a-z0-9]*)@[0-7]$":
68 minimum: 0
81 channel will be calibrated with 0V and 1.25V reference channels,
140 "^([-a-z0-9]*)@[0-7]$":
172 #size-cells = <0>;
174 reg = <0x3100>;
177 #size-cells = <0>;
191 reg = <0x3500>;
192 interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
[all …]
/Linux-v6.6/drivers/bus/
Domap_l3_smx.h14 #define L3_COMPONENT 0x000
15 #define L3_CORE 0x018
16 #define L3_AGENT_CONTROL 0x020
17 #define L3_AGENT_STATUS 0x028
18 #define L3_ERROR_LOG 0x058
23 #define L3_ERROR_LOG_ADDR 0x060
26 #define L3_SI_CONTROL 0x020
27 #define L3_SI_FLAG_STATUS_0 0x510
31 #define L3_STATUS_0_MPUIA_BRST (shift << 0)
95 #define L3_SI_FLAG_STATUS_1 0x530
[all …]
Domap_l3_noc.h16 #define CUSTOM_ERROR 0x2
17 #define STANDARD_ERROR 0x0
18 #define INBAND_ERROR 0x0
19 #define L3_APPLICATION_ERROR 0x0
20 #define L3_DEBUG_ERROR 0x1
23 #define L3_TARG_STDERRLOG_MAIN 0x48
24 #define L3_TARG_STDERRLOG_HDR 0x4c
25 #define L3_TARG_STDERRLOG_MSTADDR 0x50
26 #define L3_TARG_STDERRLOG_INFO 0x58
27 #define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c
[all …]
/Linux-v6.6/arch/alpha/kernel/
Dsys_nautilus.c75 dev->bus->self && dev->bus->self->device == 0x700f) in nautilus_map_irq()
92 pci_bus_read_config_byte(bus, 0x38, 0x43, &t8); in nautilus_kill_arch()
93 pci_bus_write_config_byte(bus, 0x38, 0x43, t8 | 0x80); in nautilus_kill_arch()
94 outb(1, 0x92); in nautilus_kill_arch()
95 outb(0, 0x92); in nautilus_kill_arch()
102 off = 0x2000; /* SLP_TYPE = 0, SLP_EN = 1 */ in nautilus_kill_arch()
103 pci_bus_read_config_dword(bus, 0x88, 0x10, &pmuport); in nautilus_kill_arch()
106 off = 0x3400; /* SLP_TYPE = 5, SLP_EN = 1 */ in nautilus_kill_arch()
107 pci_bus_read_config_dword(bus, 0x88, 0xe0, &pmuport); in nautilus_kill_arch()
109 pmuport &= 0xfffe; in nautilus_kill_arch()
[all …]
/Linux-v6.6/arch/powerpc/boot/dts/fsl/
Dmpc8569si-post.dtsi39 interrupts = <19 2 0 0>;
40 sleep = <&pmc 0x08000000>;
43 /* controller at 0xa000 */
49 bus-range = <0 255>;
51 interrupts = <26 2 0 0>;
52 sleep = <&pmc 0x20000000>;
54 pcie@0 {
55 reg = <0 0 0 0 0>;
60 interrupts = <26 2 0 0>;
61 interrupt-map-mask = <0xf800 0 0 7>;
[all …]
/Linux-v6.6/drivers/gpu/drm/amd/include/asic_reg/oss/
Doss_2_4_d.h27 #define mmIH_VMID_0_LUT 0xe00
28 #define mmIH_VMID_1_LUT 0xe01
29 #define mmIH_VMID_2_LUT 0xe02
30 #define mmIH_VMID_3_LUT 0xe03
31 #define mmIH_VMID_4_LUT 0xe04
32 #define mmIH_VMID_5_LUT 0xe05
33 #define mmIH_VMID_6_LUT 0xe06
34 #define mmIH_VMID_7_LUT 0xe07
35 #define mmIH_VMID_8_LUT 0xe08
36 #define mmIH_VMID_9_LUT 0xe09
[all …]
Doss_3_0_1_d.h27 #define mmIH_VMID_0_LUT 0xe00
28 #define mmIH_VMID_1_LUT 0xe01
29 #define mmIH_VMID_2_LUT 0xe02
30 #define mmIH_VMID_3_LUT 0xe03
31 #define mmIH_VMID_4_LUT 0xe04
32 #define mmIH_VMID_5_LUT 0xe05
33 #define mmIH_VMID_6_LUT 0xe06
34 #define mmIH_VMID_7_LUT 0xe07
35 #define mmIH_VMID_8_LUT 0xe08
36 #define mmIH_VMID_9_LUT 0xe09
[all …]
Doss_2_0_d.h27 #define mmIH_VMID_0_LUT 0xf50
28 #define mmIH_VMID_1_LUT 0xf51
29 #define mmIH_VMID_2_LUT 0xf52
30 #define mmIH_VMID_3_LUT 0xf53
31 #define mmIH_VMID_4_LUT 0xf54
32 #define mmIH_VMID_5_LUT 0xf55
33 #define mmIH_VMID_6_LUT 0xf56
34 #define mmIH_VMID_7_LUT 0xf57
35 #define mmIH_VMID_8_LUT 0xf58
36 #define mmIH_VMID_9_LUT 0xf59
[all …]
/Linux-v6.6/drivers/gpu/drm/nouveau/nvkm/engine/gr/
Dga102.c38 u32 invalid[] = { 0, 0, 0, 0 }, *color; in ga102_gr_zbc_clear_color()
45 nvkm_mask(device, 0x41bcb4, 0x0000001f, zbc); in ga102_gr_zbc_clear_color()
46 nvkm_wr32(device, 0x41bcec, color[0]); in ga102_gr_zbc_clear_color()
47 nvkm_wr32(device, 0x41bcf0, color[1]); in ga102_gr_zbc_clear_color()
48 nvkm_wr32(device, 0x41bcf4, color[2]); in ga102_gr_zbc_clear_color()
49 nvkm_wr32(device, 0x41bcf8, color[3]); in ga102_gr_zbc_clear_color()
65 nvkm_wr32(device, 0x41a610, 0x00000000); in ga102_gr_gpccs_reset()
67 nvkm_wr32(device, 0x41a610, 0x00000001); in ga102_gr_gpccs_reset()
73 .bl_entry = 0x3400,
84 nvkm_wr32(device, 0x409614, 0x00000010); in ga102_gr_fecs_reset()
[all …]
/Linux-v6.6/drivers/net/dsa/mv88e6xxx/
Dport.h16 /* Offset 0x00: Port Status Register */
17 #define MV88E6XXX_PORT_STS 0x00
18 #define MV88E6XXX_PORT_STS_PAUSE_EN 0x8000
19 #define MV88E6XXX_PORT_STS_MY_PAUSE 0x4000
20 #define MV88E6XXX_PORT_STS_HD_FLOW 0x2000
21 #define MV88E6XXX_PORT_STS_PHY_DETECT 0x1000
22 #define MV88E6250_PORT_STS_LINK 0x1000
23 #define MV88E6250_PORT_STS_PORTMODE_MASK 0x0f00
24 #define MV88E6250_PORT_STS_PORTMODE_PHY_10_HALF 0x0800
25 #define MV88E6250_PORT_STS_PORTMODE_PHY_100_HALF 0x0900
[all …]
/Linux-v6.6/arch/powerpc/boot/dts/
Dmpc836x_rdk.dts32 #size-cells = <0>;
34 PowerPC,8360@0 {
36 reg = <0>;
42 timebase-frequency = <0>;
43 bus-frequency = <0>;
44 clock-frequency = <0>;
51 reg = <0 0>;
60 ranges = <0 0xe0000000 0x200000>;
61 reg = <0xe0000000 0x200>;
63 bus-frequency = <0>;
[all …]

1234