Home
last modified time | relevance | path

Searched +full:0 +full:x3100 (Results 1 – 25 of 140) sorted by relevance

123456

/Linux-v6.1/arch/powerpc/boot/dts/fsl/
Dpq3-i2c-1.dtsi2 * PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
37 #size-cells = <0>;
40 reg = <0x3100 0x100>;
41 interrupts = <43 2 0 0>;
/Linux-v6.1/drivers/mfd/
Dsi476x-prop.c25 for (i = 0; i < size; i++) in si476x_core_element_is_in_array()
38 for (i = 0; i < size; i++) in si476x_core_element_is_in_range()
49 0x0000, in si476x_core_is_valid_property_a10()
50 0x0500, 0x0501, in si476x_core_is_valid_property_a10()
51 0x0600, in si476x_core_is_valid_property_a10()
52 0x0709, 0x070C, 0x070D, 0x70E, 0x710, in si476x_core_is_valid_property_a10()
53 0x0718, in si476x_core_is_valid_property_a10()
54 0x1207, 0x1208, in si476x_core_is_valid_property_a10()
55 0x2007, in si476x_core_is_valid_property_a10()
56 0x2300, in si476x_core_is_valid_property_a10()
[all …]
/Linux-v6.1/Documentation/devicetree/bindings/thermal/
Dqcom-spmi-adc-tm5.yaml33 const: 0
59 "^([-a-z0-9]*)@[0-7]$":
67 minimum: 0
80 channel will be calibrated with 0V and 1.25V reference channels,
139 "^([-a-z0-9]*)@[0-7]$":
171 #size-cells = <0>;
173 reg = <0x3100>;
176 #size-cells = <0>;
189 reg = <0x3500>;
190 interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
[all …]
/Linux-v6.1/Documentation/devicetree/bindings/virtio/
Dmmio.yaml52 reg = <0x3000 0x100>;
61 reg = <0x3100 0x100>;
/Linux-v6.1/Documentation/admin-guide/media/
Ddvb-usb-dw2102-cardlist.rst11 :stub-columns: 0
15 * - DVBWorld DVB-C 3101 USB2.0
17 * - DVBWorld DVB-S 2101 USB2.0
18 - 04b4:0x2101
19 * - DVBWorld DVB-S 2102 USB2.0
21 * - DVBWorld DW2104 USB2.0
24 - 0x1FE1:5456
25 * - Geniatech T220 DVB-T/T2 USB2.0
26 - 0x1f4d:0xD220
27 * - SU3000HD DVB-S USB2.0
[all …]
/Linux-v6.1/drivers/staging/media/meson/vdec/
Ddos_regs.h11 #define VDEC_ASSIST_AMR1_INT8 0x00b4
13 #define ASSIST_MBOX1_CLR_REG 0x01d4
14 #define ASSIST_MBOX1_MASK 0x01d8
16 #define MPSR 0x0c04
17 #define MCPU_INTR_MSK 0x0c10
18 #define CPSR 0x0c84
20 #define IMEM_DMA_CTRL 0x0d00
21 #define IMEM_DMA_ADR 0x0d04
22 #define IMEM_DMA_COUNT 0x0d08
23 #define LMEM_DMA_CTRL 0x0d40
[all …]
/Linux-v6.1/arch/arm64/boot/dts/qcom/
Dpmk8350.dtsi12 pmk8350: pmic@0 {
14 reg = <0x0 SPMI_USID>;
16 #size-cells = <0>;
20 reg = <0x1300>;
24 interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
31 interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
38 reg = <0x3100>;
40 #size-cells = <0>;
41 interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
47 reg = <0x3400>;
[all …]
Dpm8953.dtsi10 pmic@0 {
12 reg = <0 SPMI_USID>;
14 #size-cells = <0>;
18 reg = <0x800>;
19 mode-bootloader = <0x2>;
20 mode-recovery = <0x1>;
24 interrupts = <0x00 0x08 0 IRQ_TYPE_EDGE_BOTH>;
32 interrupts = <0x00 0x08 1 IRQ_TYPE_EDGE_BOTH>;
41 reg = <0x2400>;
42 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
[all …]
Dpm6150l.dtsi11 reg = <0x4 SPMI_USID>;
13 #size-cells = <0>;
17 reg = <0x3100>;
18 interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
20 #size-cells = <0>;
23 adc-chan@0 {
50 reg = <0x3500>;
51 interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
54 #size-cells = <0>;
60 reg = <0xc000>;
[all …]
Dpmm8155au_2.dtsi14 polling-delay = <0>;
21 hysteresis = <0>;
27 hysteresis = <0>;
33 hysteresis = <0>;
44 reg = <0x4 SPMI_USID>;
46 #size-cells = <0>;
50 reg = <0x0800>;
57 reg = <0x2400>;
58 interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
61 #thermal-sensor-cells = <0>;
[all …]
Dpm6150.dtsi14 polling-delay = <0>;
20 hysteresis = <0>;
26 hysteresis = <0>;
35 pm6150_lsid0: pmic@0 {
37 reg = <0x0 SPMI_USID>;
39 #size-cells = <0>;
43 reg = <0x800>;
44 mode-bootloader = <0x2>;
45 mode-recovery = <0x1>;
49 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
[all …]
Dpm8150l.dtsi15 polling-delay = <0>;
22 hysteresis = <0>;
28 hysteresis = <0>;
34 hysteresis = <0>;
45 reg = <0x4 SPMI_USID>;
47 #size-cells = <0>;
51 reg = <0x0800>;
58 reg = <0x2400>;
59 interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
62 #thermal-sensor-cells = <0>;
[all …]
Dpmm8155au_1.dtsi15 polling-delay = <0>;
22 hysteresis = <0>;
28 hysteresis = <0>;
34 hysteresis = <0>;
43 pmic@0 {
45 reg = <0x0 SPMI_USID>;
47 #size-cells = <0>;
51 reg = <0x0800>;
54 interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
65 reg = <0x2400>;
[all …]
Dpm8998.dtsi35 pm8998_lsid0: pmic@0 {
37 reg = <0x0 SPMI_USID>;
39 #size-cells = <0>;
44 reg = <0x800>;
45 mode-bootloader = <0x2>;
46 mode-recovery = <0x1>;
50 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
59 reg = <0x2400>;
60 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
63 #thermal-sensor-cells = <0>;
[all …]
Dpm8150b.dtsi15 polling-delay = <0>;
22 hysteresis = <0>;
28 hysteresis = <0>;
34 hysteresis = <0>;
45 reg = <0x2 SPMI_USID>;
47 #size-cells = <0>;
51 reg = <0x0800>;
59 reg = <0x1100>;
64 reg = <0x2400>;
65 interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
[all …]
Dpm8150.dtsi16 polling-delay = <0>;
23 hysteresis = <0>;
29 hysteresis = <0>;
35 hysteresis = <0>;
44 pm8150_0: pmic@0 {
46 reg = <0x0 SPMI_USID>;
48 #size-cells = <0>;
52 reg = <0x0800>;
53 mode-bootloader = <0x2>;
54 mode-recovery = <0x1>;
[all …]
Dpms405.dtsi34 pms405_0: pms405@0 {
36 reg = <0x0 SPMI_USID>;
38 #size-cells = <0>;
42 reg = <0xc000>;
44 gpio-ranges = <&pms405_gpios 0 0 12>;
52 reg = <0x0800>;
53 mode-bootloader = <0x2>;
54 mode-recovery = <0x1>;
58 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
67 reg = <0x2400>;
[all …]
/Linux-v6.1/arch/arm/boot/dts/
Dqcom-pmx55.dtsi15 reg = <0x8 SPMI_USID>;
17 #size-cells = <0>;
21 reg = <0x0800>;
28 reg = <0x2400>;
29 interrupts = <0x8 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
32 #thermal-sensor-cells = <0>;
37 reg = <0x3100>;
39 #size-cells = <0>;
41 interrupts = <0x8 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
43 ref-gnd@0 {
[all …]
Dqcom-pma8084.dtsi8 pma8084_0: pma8084@0 {
10 reg = <0x0 SPMI_USID>;
12 #size-cells = <0>;
16 reg = <0x6000>,
17 <0x6100>;
19 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
24 reg = <0x800>;
25 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
32 reg = <0xc000>;
34 gpio-ranges = <&pma8084_gpios 0 0 22>;
[all …]
Dqcom-pm8226.dtsi7 pm8226_0: pm8226@0 {
9 reg = <0x0 SPMI_USID>;
11 #size-cells = <0>;
15 reg = <0x800>;
16 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
23 reg = <0x1000>;
24 interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
25 <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
26 <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
27 <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
[all …]
/Linux-v6.1/Documentation/devicetree/bindings/i2c/
Di2c-mpc.yaml68 #size-cells = <0>;
70 reg = <0x1740 0x20>;
71 interrupts = <11 0x8>;
80 #size-cells = <0>;
82 reg = <0x3d00 0x40>;
83 interrupts = <2 15 0>;
92 #size-cells = <0>;
94 reg = <0x3100 0x100>;
/Linux-v6.1/drivers/net/ethernet/intel/ixgbevf/
Dregs.h7 #define IXGBE_VFCTRL 0x00000
8 #define IXGBE_VFSTATUS 0x00008
9 #define IXGBE_VFLINKS 0x00010
10 #define IXGBE_VFFRTIMER 0x00048
11 #define IXGBE_VFRXMEMWRAP 0x03190
12 #define IXGBE_VTEICR 0x00100
13 #define IXGBE_VTEICS 0x00104
14 #define IXGBE_VTEIMS 0x00108
15 #define IXGBE_VTEIMC 0x0010C
16 #define IXGBE_VTEIAC 0x00110
[all …]
/Linux-v6.1/drivers/gpu/drm/msm/adreno/
Da4xx_gpu.c30 for (i = 0; i < submit->nr_cmds; i++) { in a4xx_submit()
61 OUT_RING(ring, 0x00000000); in a4xx_submit()
80 for (i = 0; i < 4; i++) in a4xx_enable_hwcg()
81 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_CTL_TP(i), 0x02222202); in a4xx_enable_hwcg()
82 for (i = 0; i < 4; i++) in a4xx_enable_hwcg()
83 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_CTL2_TP(i), 0x00002222); in a4xx_enable_hwcg()
84 for (i = 0; i < 4; i++) in a4xx_enable_hwcg()
85 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_HYST_TP(i), 0x0E739CE7); in a4xx_enable_hwcg()
86 for (i = 0; i < 4; i++) in a4xx_enable_hwcg()
87 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_DELAY_TP(i), 0x00111111); in a4xx_enable_hwcg()
[all …]
/Linux-v6.1/sound/soc/codecs/
Drt700.h35 #define RT700_AUDIO_FUNCTION_GROUP 0x01
36 #define RT700_DAC_OUT1 0x02
37 #define RT700_DAC_OUT2 0x03
38 #define RT700_ADC_IN1 0x09
39 #define RT700_ADC_IN2 0x08
40 #define RT700_DMIC1 0x12
41 #define RT700_DMIC2 0x13
42 #define RT700_SPK_OUT 0x14
43 #define RT700_MIC2 0x19
44 #define RT700_LINE1 0x1a
[all …]
/Linux-v6.1/Documentation/devicetree/bindings/net/dsa/
Dlantiq-gswip.txt50 #size-cells = <0>;
52 reg = < 0xe108000 0x3100 /* switch */
53 0xe10b100 0xd8 /* mdio */
54 0xe10b1d8 0x130 /* mii */
56 dsa,member = <0 0>;
60 #size-cells = <0>;
62 port@0 {
63 reg = <0>;
98 reg = <0x6>;
105 #size-cells = <0>;
[all …]

123456