/Linux-v5.10/drivers/misc/habanalabs/include/goya/asic_reg/ |
D | cpu_ca53_cfg_masks.h | 23 #define CPU_CA53_CFG_ARM_CFG_AA64NAA32_SHIFT 0 24 #define CPU_CA53_CFG_ARM_CFG_AA64NAA32_MASK 0x3 26 #define CPU_CA53_CFG_ARM_CFG_END_MASK 0x30 28 #define CPU_CA53_CFG_ARM_CFG_TE_MASK 0x300 30 #define CPU_CA53_CFG_ARM_CFG_VINITHI_MASK 0x3000 33 #define CPU_CA53_CFG_RST_ADDR_LSB_VECTOR_SHIFT 0 34 #define CPU_CA53_CFG_RST_ADDR_LSB_VECTOR_MASK 0xFFFFFFFF 37 #define CPU_CA53_CFG_RST_ADDR_MSB_VECTOR_SHIFT 0 38 #define CPU_CA53_CFG_RST_ADDR_MSB_VECTOR_MASK 0xFF 41 #define CPU_CA53_CFG_ARM_RST_CONTROL_NCPUPORESET_SHIFT 0 [all …]
|
/Linux-v5.10/drivers/net/wireless/realtek/rtlwifi/btcoexist/ |
D | halbtc8822bwifionly.c | 9 halwifionly_phy_set_bb_reg(wifionlycfg, 0x4c, 0x01800000, 0x2); in ex_hal8822b_wifi_only_hw_config() 11 halwifionly_phy_set_bb_reg(wifionlycfg, 0xcb4, 0xff, 0x77); in ex_hal8822b_wifi_only_hw_config() 13 halwifionly_phy_set_bb_reg(wifionlycfg, 0x974, 0x300, 0x3); in ex_hal8822b_wifi_only_hw_config() 15 halwifionly_phy_set_bb_reg(wifionlycfg, 0x1990, 0x300, 0x0); in ex_hal8822b_wifi_only_hw_config() 17 halwifionly_phy_set_bb_reg(wifionlycfg, 0xcbc, 0x80000, 0x0); in ex_hal8822b_wifi_only_hw_config() 19 halwifionly_phy_set_bb_reg(wifionlycfg, 0x70, 0xff000000, 0x0e); in ex_hal8822b_wifi_only_hw_config() 20 /*gnt_wl=1 , gnt_bt=0*/ in ex_hal8822b_wifi_only_hw_config() 21 halwifionly_phy_set_bb_reg(wifionlycfg, 0x1704, 0xffffffff, 0x7700); in ex_hal8822b_wifi_only_hw_config() 22 halwifionly_phy_set_bb_reg(wifionlycfg, 0x1700, 0xffffffff, 0xc00f0038); in ex_hal8822b_wifi_only_hw_config() 41 halwifionly_phy_set_bb_reg(wifionlycfg, 0xcbc, 0x300, 0x1); in hal8822b_wifi_only_switch_antenna() [all …]
|
/Linux-v5.10/drivers/media/dvb-frontends/ |
D | dib0090.c | 25 MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); 31 } while (0) 40 #define EN_LNA0 0x8000 41 #define EN_LNA1 0x4000 42 #define EN_LNA2 0x2000 43 #define EN_LNA3 0x1000 44 #define EN_MIX0 0x0800 45 #define EN_MIX1 0x0400 46 #define EN_MIX2 0x0200 47 #define EN_MIX3 0x0100 [all …]
|
/Linux-v5.10/drivers/media/pci/bt8xx/ |
D | bttv-audio-hook.c | 30 for (loops = 17; loops >= 0 ; loops--) { in winview_volume() 70 gpio_inout(0x300, 0x300); in gvbctv3pci_audio() 74 con = 0x000; in gvbctv3pci_audio() 77 con = 0x300; in gvbctv3pci_audio() 80 con = 0x200; in gvbctv3pci_audio() 83 gpio_bits(0x300, con); in gvbctv3pci_audio() 97 con = 0x300; in gvbctv5pci_audio() 100 con = 0x100; in gvbctv5pci_audio() 103 con = 0x000; in gvbctv5pci_audio() 106 if (con != (val & 0x300)) { in gvbctv5pci_audio() [all …]
|
/Linux-v5.10/arch/arm/mach-orion5x/ |
D | bridge-regs.h | 14 #define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE + 0x100) 16 #define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE + 0x104) 18 #define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x108) 19 #define RSTOUTn_MASK_PHYS (ORION5X_BRIDGE_PHYS_BASE + 0x108) 21 #define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE + 0x10c) 23 #define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x110) 25 #define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE + 0x11C) 27 #define BRIDGE_INT_TIMER1_CLR (~0x0004) 29 #define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x200) 31 #define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x204) [all …]
|
/Linux-v5.10/drivers/soc/tegra/fuse/ |
D | fuse-tegra30.c | 21 #define FUSE_BEGIN 0x100 24 #define FUSE_VENDOR_CODE 0x100 25 #define FUSE_FAB_CODE 0x104 26 #define FUSE_LOT_CODE_0 0x108 27 #define FUSE_LOT_CODE_1 0x10c 28 #define FUSE_WAFER_ID 0x110 29 #define FUSE_X_COORDINATE 0x114 30 #define FUSE_Y_COORDINATE 0x118 32 #define FUSE_HAS_REVISION_INFO BIT(0) 44 return 0; in tegra30_fuse_read_early() [all …]
|
/Linux-v5.10/arch/sh/drivers/pci/ |
D | fixups-snapgear.c | 26 case 11: irq = evt2irq(0x300); break; /* USB */ in pcibios_map_platform_irq() 27 case 12: irq = evt2irq(0x360); break; /* PCMCIA */ in pcibios_map_platform_irq() 28 case 13: irq = evt2irq(0x2a0); break; /* eth0 */ in pcibios_map_platform_irq() 29 case 14: irq = evt2irq(0x300); break; /* eth1 */ in pcibios_map_platform_irq() 30 case 15: irq = evt2irq(0x360); break; /* safenet (unused) */ in pcibios_map_platform_irq()
|
/Linux-v5.10/arch/arm/boot/dts/ |
D | at91sam9x5_can.dtsi | 17 reg = <0xf8000000 0x300>; 20 pinctrl-0 = <&pinctrl_can0_rx_tx>; 28 reg = <0xf8004000 0x300>; 31 pinctrl-0 = <&pinctrl_can1_rx_tx>;
|
D | sama5d3_can.dtsi | 36 reg = <0xf000c000 0x300>; 39 pinctrl-0 = <&pinctrl_can0_rx_tx>; 47 reg = <0xf8010000 0x300>; 50 pinctrl-0 = <&pinctrl_can1_rx_tx>;
|
D | omap-zoom-common.dtsi | 9 ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */ 10 <7 0 0x2c000000 0x01000000>; 17 uart@3,0 { 19 reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ 27 gpmc,mux-add-data = <0>; 48 gpmc,wait-monitoring-ns = <0>; 49 gpmc,clk-activation-ns = <0>; 55 reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ 66 reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ 77 reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ [all …]
|
/Linux-v5.10/include/dt-bindings/clock/ |
D | lpc18xx-ccu.h | 13 #define CLK_APB3_BUS 0x100 14 #define CLK_APB3_I2C1 0x108 15 #define CLK_APB3_DAC 0x110 16 #define CLK_APB3_ADC0 0x118 17 #define CLK_APB3_ADC1 0x120 18 #define CLK_APB3_CAN0 0x128 19 #define CLK_APB1_BUS 0x200 20 #define CLK_APB1_MOTOCON_PWM 0x208 21 #define CLK_APB1_I2C0 0x210 22 #define CLK_APB1_I2S 0x218 [all …]
|
/Linux-v5.10/drivers/gpu/drm/amd/include/asic_reg/gca/ |
D | gfx_7_2_sh_mask.h | 27 #define CB_BLEND_RED__BLEND_RED_MASK 0xffffffff 28 #define CB_BLEND_RED__BLEND_RED__SHIFT 0x0 29 #define CB_BLEND_GREEN__BLEND_GREEN_MASK 0xffffffff 30 #define CB_BLEND_GREEN__BLEND_GREEN__SHIFT 0x0 31 #define CB_BLEND_BLUE__BLEND_BLUE_MASK 0xffffffff 32 #define CB_BLEND_BLUE__BLEND_BLUE__SHIFT 0x0 33 #define CB_BLEND_ALPHA__BLEND_ALPHA_MASK 0xffffffff 34 #define CB_BLEND_ALPHA__BLEND_ALPHA__SHIFT 0x0 35 #define CB_COLOR_CONTROL__DEGAMMA_ENABLE_MASK 0x8 36 #define CB_COLOR_CONTROL__DEGAMMA_ENABLE__SHIFT 0x3 [all …]
|
D | gfx_8_0_sh_mask.h | 27 #define CB_BLEND_RED__BLEND_RED_MASK 0xffffffff 28 #define CB_BLEND_RED__BLEND_RED__SHIFT 0x0 29 #define CB_BLEND_GREEN__BLEND_GREEN_MASK 0xffffffff 30 #define CB_BLEND_GREEN__BLEND_GREEN__SHIFT 0x0 31 #define CB_BLEND_BLUE__BLEND_BLUE_MASK 0xffffffff 32 #define CB_BLEND_BLUE__BLEND_BLUE__SHIFT 0x0 33 #define CB_BLEND_ALPHA__BLEND_ALPHA_MASK 0xffffffff 34 #define CB_BLEND_ALPHA__BLEND_ALPHA__SHIFT 0x0 35 #define CB_DCC_CONTROL__OVERWRITE_COMBINER_DISABLE_MASK 0x1 36 #define CB_DCC_CONTROL__OVERWRITE_COMBINER_DISABLE__SHIFT 0x0 [all …]
|
D | gfx_8_1_sh_mask.h | 27 #define CB_BLEND_RED__BLEND_RED_MASK 0xffffffff 28 #define CB_BLEND_RED__BLEND_RED__SHIFT 0x0 29 #define CB_BLEND_GREEN__BLEND_GREEN_MASK 0xffffffff 30 #define CB_BLEND_GREEN__BLEND_GREEN__SHIFT 0x0 31 #define CB_BLEND_BLUE__BLEND_BLUE_MASK 0xffffffff 32 #define CB_BLEND_BLUE__BLEND_BLUE__SHIFT 0x0 33 #define CB_BLEND_ALPHA__BLEND_ALPHA_MASK 0xffffffff 34 #define CB_BLEND_ALPHA__BLEND_ALPHA__SHIFT 0x0 35 #define CB_DCC_CONTROL__OVERWRITE_COMBINER_DISABLE_MASK 0x1 36 #define CB_DCC_CONTROL__OVERWRITE_COMBINER_DISABLE__SHIFT 0x0 [all …]
|
/Linux-v5.10/arch/sh/boards/mach-se/7206/ |
D | setup.c | 20 [0] = { 22 .start = PA_SMSC + 0x300, 23 .end = PA_SMSC + 0x300 + 0x020 - 1, 42 .coherent_dma_mask = 0xffffffff,
|
/Linux-v5.10/arch/mips/kernel/ |
D | cevt-ds1287.c | 17 return (CMOS_READ(RTC_REG_C) & RTC_PF) != 0; in ds1287_timer_state() 26 rate = 0x9; in ds1287_set_base_clock() 29 rate = 0x8; in ds1287_set_base_clock() 32 rate = 0x6; in ds1287_set_base_clock() 40 return 0; in ds1287_set_base_clock() 60 return 0; in ds1287_shutdown() 74 return 0; in ds1287_set_periodic() 112 cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); in ds1287_clockevent_init() 113 cd->max_delta_ticks = 0x7fffffff; in ds1287_clockevent_init() 114 cd->min_delta_ns = clockevent_delta2ns(0x300, cd); in ds1287_clockevent_init() [all …]
|
D | cevt-gt641xx.c | 27 return 0; in gt641xx_timer0_state() 51 return 0; in gt641xx_timer0_set_next_event() 65 return 0; in gt641xx_timer0_shutdown() 80 return 0; in gt641xx_timer0_set_oneshot() 94 return 0; in gt641xx_timer0_set_periodic() 128 return 0; in gt641xx_timer0_clockevent_init() 135 cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); in gt641xx_timer0_clockevent_init() 136 cd->max_delta_ticks = 0x7fffffff; in gt641xx_timer0_clockevent_init() 137 cd->min_delta_ns = clockevent_delta2ns(0x300, cd); in gt641xx_timer0_clockevent_init() 138 cd->min_delta_ticks = 0x300; in gt641xx_timer0_clockevent_init() [all …]
|
/Linux-v5.10/drivers/staging/rtl8192e/rtl8192e/ |
D | r8192E_phyreg.h | 11 #define RF_DATA 0x1d4 13 #define rPMAC_Reset 0x100 14 #define rPMAC_TxStart 0x104 15 #define rPMAC_TxLegacySIG 0x108 16 #define rPMAC_TxHTSIG1 0x10c 17 #define rPMAC_TxHTSIG2 0x110 18 #define rPMAC_PHYDebug 0x114 19 #define rPMAC_TxPacketNum 0x118 20 #define rPMAC_TxIdle 0x11c 21 #define rPMAC_TxMACHeader0 0x120 [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/mmc/ |
D | arasan,sdhci.yaml | 129 enum: [0, 1] 150 enum: [0, 2] 151 default: 0 172 reg = <0xe0100000 0x1000>; 176 interrupts = <0 24 4>; 182 reg = <0xe2800000 0x1000>; 186 interrupts = <0 24 4>; 197 reg = <0xfe330000 0x10000>; 207 #clock-cells = <0>; 214 interrupts = <0 48 4>; [all …]
|
/Linux-v5.10/arch/sh/boards/mach-sdk7780/ |
D | setup.c | 18 #define GPIO_PECR 0xFFEA0008 36 [0] = { 38 .start = PA_LAN + 0x300, 39 .end = PA_LAN + 0x300 + 0x10 , 51 .id = 0, 54 .coherent_dma_mask = 0xffffffff, 80 (ver >> 12) & 0xf, (ver >> 8) & 0xf, in sdk7780_setup() 81 (ver >> 4) & 0xf, ver & 0xf, in sdk7780_setup() 85 __raw_writew(0x0000, GPIO_PECR); in sdk7780_setup()
|
/Linux-v5.10/arch/sh/boards/mach-se/7780/ |
D | setup.c | 32 [0] = { 34 .start = PA_LAN + 0x300, 35 .end = PA_LAN + 0x300 + 0x10 , 47 .id = 0, 50 .coherent_dma_mask = 0xffffffff, 68 #define GPIO_PHCR 0xFFEA000E 69 #define GPIO_PMSELR 0xFFEA0080 70 #define GPIO_PECR 0xFFEA0008 93 __raw_writew(0x0213, FPGA_REQSEL); in se7780_setup() 96 __raw_writew(0x0000, GPIO_PECR); in se7780_setup() [all …]
|
/Linux-v5.10/arch/mips/boot/dts/ralink/ |
D | mt7628a.dtsi | 10 #size-cells = <0>; 12 cpu@0 { 15 reg = <0>; 25 #address-cells = <0>; 33 reg = <0x10000000 0x200000>; 34 ranges = <0x0 0x10000000 0x1FFFFF>; 39 sysc: system-controller@0 { 41 reg = <0x0 0x60>; 46 reg = <0x60 0x8>; 48 #size-cells = <0>; [all …]
|
/Linux-v5.10/drivers/net/ethernet/hisilicon/hns3/hns3pf/ |
D | hclge_err.h | 15 #define HCLGE_RAS_PF_OTHER_INT_STS_REG 0x20B00 16 #define HCLGE_RAS_REG_NFE_MASK 0xFF00 17 #define HCLGE_RAS_REG_ROCEE_ERR_MASK 0x3000000 19 #define HCLGE_VECTOR0_REG_MSIX_MASK 0x1FF00 21 #define HCLGE_IMP_TCM_ECC_ERR_INT_EN 0xFFFF0000 22 #define HCLGE_IMP_TCM_ECC_ERR_INT_EN_MASK 0xFFFF0000 23 #define HCLGE_IMP_ITCM4_ECC_ERR_INT_EN 0x300 24 #define HCLGE_IMP_ITCM4_ECC_ERR_INT_EN_MASK 0x300 25 #define HCLGE_CMDQ_NIC_ECC_ERR_INT_EN 0xFFFF 26 #define HCLGE_CMDQ_NIC_ECC_ERR_INT_EN_MASK 0xFFFF [all …]
|
/Linux-v5.10/arch/mips/loongson2ef/common/cs5536/ |
D | cs5536_acc.c | 17 u32 hi = 0, lo = value; in pci_acc_write_reg() 23 lo |= (0x03 << 8); in pci_acc_write_reg() 25 lo &= ~(0x03 << 8); in pci_acc_write_reg() 32 lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; in pci_acc_write_reg() 42 } else if (value & 0x01) { in pci_acc_write_reg() 43 value &= 0xfffffffc; in pci_acc_write_reg() 44 hi = 0xA0000000 | ((value & 0x000ff000) >> 12); in pci_acc_write_reg() 45 lo = 0x000fff80 | ((value & 0x00000fff) << 20); in pci_acc_write_reg() 52 lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT); in pci_acc_write_reg() 65 u32 conf_data = 0; in pci_acc_read_reg() [all …]
|
/Linux-v5.10/arch/powerpc/boot/dts/ |
D | akebono.dts | 14 /memreserve/ 0x01f00000 0x00100000; // spin table 21 dcr-parent = <&{/cpus/cpu@0}>; 29 #size-cells = <0>; 31 cpu@0 { 34 reg = <0>; 59 cpu-release-addr = <0x0 0x01f00000>; 65 reg = <0x0 0x0 0x0 0x0>; // filled in by zImage 71 dcr-reg = <0xffc00000 0x00040000>; 72 #address-cells = <0>; 73 #size-cells = <0>; [all …]
|