/Linux-v6.1/drivers/video/fbdev/sis/ |
D | oem300.h | 55 {0x08,0x08,0x08,0x08}, 56 {0x08,0x08,0x08,0x08}, 57 {0x08,0x08,0x08,0x08}, 58 {0x2c,0x2c,0x2c,0x2c}, 59 {0x08,0x08,0x08,0x08}, 60 {0x08,0x08,0x08,0x08}, 61 {0x08,0x08,0x08,0x08}, 62 {0x20,0x20,0x20,0x20} 67 {0x20,0x20,0x20,0x20}, 68 {0x20,0x20,0x20,0x20}, [all …]
|
D | oem310.h | 55 0x00,0x00,0x00, /* 800x600 */ 56 0x0b,0x0b,0x0b, /* 1024x768 */ 57 0x08,0x08,0x08, /* 1280x1024 */ 58 0x00,0x00,0x00, /* 640x480 (unknown) */ 59 0x00,0x00,0x00, /* 1024x600 (unknown) */ 60 0x00,0x00,0x00, /* 1152x864 (unknown) */ 61 0x08,0x08,0x08, /* 1280x960 (guessed) */ 62 0x00,0x00,0x00, /* 1152x768 (unknown) */ 63 0x08,0x08,0x08, /* 1400x1050 */ 64 0x08,0x08,0x08, /* 1280x768 (guessed) */ [all …]
|
/Linux-v6.1/drivers/media/usb/gspca/gl860/ |
D | gl860-mi2020.c | 12 static u8 dat_wbal1[] = {0x8c, 0xa2, 0x0c}; 14 static u8 dat_bright1[] = {0x8c, 0xa2, 0x06}; 15 static u8 dat_bright3[] = {0x8c, 0xa1, 0x02}; 16 static u8 dat_bright4[] = {0x90, 0x00, 0x0f}; 17 static u8 dat_bright5[] = {0x8c, 0xa1, 0x03}; 18 static u8 dat_bright6[] = {0x90, 0x00, 0x05}; 20 static u8 dat_hvflip1[] = {0x8c, 0x27, 0x19}; 21 static u8 dat_hvflip3[] = {0x8c, 0x27, 0x3b}; 22 static u8 dat_hvflip5[] = {0x8c, 0xa1, 0x03}; 23 static u8 dat_hvflip6[] = {0x90, 0x00, 0x06}; [all …]
|
/Linux-v6.1/drivers/gpu/drm/panel/ |
D | panel-samsung-s6e63j0x03.c | 23 #define MCS_LEVEL2_KEY 0xf0 24 #define MCS_MTP_KEY 0xf1 25 #define MCS_MTP_SET3 0xd4 54 .flags = 0, 60 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x52, 0x6b, 0x6f, 0x26, 61 0x28, 0x2d, 0x28, 0x26, 0x27, 0x33, 0x34, 0x32, 0x36, 0x36, 62 0x35, 0x00, 0xab, 0x00, 0xae, 0x00, 0xbf 66 0x00, 0x00, 0x00, 0x70, 0x7f, 0x7f, 0x4e, 0x64, 0x69, 0x26, 67 0x27, 0x2a, 0x28, 0x29, 0x27, 0x31, 0x32, 0x31, 0x35, 0x34, 68 0x35, 0x00, 0xc4, 0x00, 0xca, 0x00, 0xdc [all …]
|
D | panel-widechips-ws2401.c | 25 #define WS2401_RESCTL 0xb8 /* Resolution select control */ 26 #define WS2401_PSMPS 0xbd /* SMPS positive control */ 27 #define WS2401_NSMPS 0xbe /* SMPS negative control */ 28 #define WS2401_SMPS 0xbf 29 #define WS2401_BCMODE 0xc1 /* Backlight control mode */ 30 #define WS2401_WRBLCTL 0xc3 /* Backlight control */ 31 #define WS2401_WRDISBV 0xc4 /* Write manual brightness */ 32 #define WS2401_WRCTRLD 0xc6 /* Write BL control */ 33 #define WS2401_WRMIE 0xc7 /* Write MIE mode */ 34 #define WS2401_READ_ID1 0xda /* Read panel ID 1 */ [all …]
|
/Linux-v6.1/crypto/ |
D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key) 103 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When 207 "\x00\xC9\x7F\xB1\xF0\x27\xF4\x53\xF6\x34\x12\x33\xEA\xAA\xD1\xD9" 246 "\xF8\x3F\x31\x25\x1E\x06\x68\xB4\x27\x84\x81\x38\x01\x57\x96\x41" 261 "\x00\xC9\x7F\xB1\xF0\x27\xF4\x53\xF6\x34\x12\x33\xEA\xAA\xD1\xD9" 302 "\x13\xC7\x88\xDA\x70\x6B\x54\xF1\xE8\x27\xDC\xC3\x0F\x99\x6A\xFA" 321 "\xB3\x27\xDF\xEA\xEE\x2C\x82\xBB\xF7\x40\x32\xD5\x14\xC4\x94\x12" 331 "\x77\xAF\x51\x27\x5B\x5E\x69\xB8\x81\xE6\x11\xC5\x43\x23\x81\x04" 339 "\x68\x27\xE2\x96\xB5\x72\xC9\xC3\xD4\x42\xAA\xAA\xCA\x95\x8F\xFF" 342 "\x42\x21\x5E\xA0\xA1\x2A\x58\x35\xBB\x10\xE7\xBA\x27\x0A\x3B\xB3" [all …]
|
/Linux-v6.1/drivers/infiniband/hw/qib/ |
D | qib_7322_regs.h | 35 #define QIB_7322_Revision_OFFS 0x0 36 #define QIB_7322_Revision_DEF 0x0000000002010601 37 #define QIB_7322_Revision_R_Simulator_LSB 0x3F 38 #define QIB_7322_Revision_R_Simulator_MSB 0x3F 39 #define QIB_7322_Revision_R_Simulator_RMASK 0x1 40 #define QIB_7322_Revision_R_Emulation_LSB 0x3E 41 #define QIB_7322_Revision_R_Emulation_MSB 0x3E 42 #define QIB_7322_Revision_R_Emulation_RMASK 0x1 43 #define QIB_7322_Revision_R_Emulation_Revcode_LSB 0x28 44 #define QIB_7322_Revision_R_Emulation_Revcode_MSB 0x3D [all …]
|
/Linux-v6.1/drivers/video/backlight/ |
D | ams369fg06.c | 19 #define SLEEPMSEC 0x1000 20 #define ENDDEF 0x2000 21 #define DEFMASK 0xFF00 22 #define COMMAND_ONLY 0xFE 23 #define DATA_ONLY 0xFF 28 #define MIN_BRIGHTNESS 0 42 0x14, 0x03, 43 ENDDEF, 0x0000 47 0x14, 0x00, 48 ENDDEF, 0x0000 [all …]
|
/Linux-v6.1/lib/crypto/ |
D | curve25519-fiat32.c | 18 * entries t[0]...t[9], represents the integer t[0]+2^26 t[1]+2^51 t[2]+2^77 41 h[0] = a0&((1<<26)-1); /* 26 used, 32-26 left. 26 */ in fe_frombytes_impl() 104 t = -!!t; /* all set if nonzero, 0 if 0 */ in cmovznz32() 119 { const u32 x2 = in1[0]; in fe_freeze() 120 { u32 x20; u8/*bool*/ x21 = subborrow_u26(0x0, x2, 0x3ffffed, &x20); in fe_freeze() 121 { u32 x23; u8/*bool*/ x24 = subborrow_u25(x21, x4, 0x1ffffff, &x23); in fe_freeze() 122 { u32 x26; u8/*bool*/ x27 = subborrow_u26(x24, x6, 0x3ffffff, &x26); in fe_freeze() local 123 { u32 x29; u8/*bool*/ x30 = subborrow_u25(x27, x8, 0x1ffffff, &x29); in fe_freeze() 124 { u32 x32; u8/*bool*/ x33 = subborrow_u26(x30, x10, 0x3ffffff, &x32); in fe_freeze() 125 { u32 x35; u8/*bool*/ x36 = subborrow_u25(x33, x12, 0x1ffffff, &x35); in fe_freeze() [all …]
|
/Linux-v6.1/drivers/gpu/drm/bridge/adv7511/ |
D | adv7533.c | 11 { 0x16, 0x20 }, 12 { 0x9a, 0xe0 }, 13 { 0xba, 0x70 }, 14 { 0xde, 0x82 }, 15 { 0xe4, 0x40 }, 16 { 0xe5, 0x80 }, 20 { 0x15, 0xd0 }, 21 { 0x17, 0xd0 }, 22 { 0x24, 0x20 }, 23 { 0x57, 0x11 }, [all …]
|
/Linux-v6.1/arch/arm/mach-omap2/ |
D | opp4xxx_data.c | 32 VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c), 33 VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16), 34 VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23), 35 VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27), 36 VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITROSB_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB, 0xfa, 0x27), 37 VOLT_DATA_DEFINE(0, 0, 0, 0), 45 VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c), 46 VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16), 47 VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23), 48 VOLT_DATA_DEFINE(0, 0, 0, 0), [all …]
|
/Linux-v6.1/arch/powerpc/boot/dts/ |
D | mpc7448hpc2.dts | 29 #size-cells =<0>; 31 PowerPC,7448@0 { 33 reg = <0x0>; 36 d-cache-size = <0x8000>; // L1, 32K bytes 37 i-cache-size = <0x8000>; // L1, 32K bytes 38 timebase-frequency = <0>; // 33 MHz, from uboot 39 clock-frequency = <0>; // From U-Boot 40 bus-frequency = <0>; // From U-Boot 46 reg = <0x0 0x20000000 // DDR2 512M at 0 54 ranges = <0x0 0xc0000000 0x10000>; [all …]
|
D | holly.dts | 23 #size-cells =<0>; 24 PowerPC,750CL@0 { 26 reg = <0x00000000>; 39 memory@0 { 41 reg = <0x00000000 0x20000000>; 49 ranges = <0x00000000 0xc0000000 0x00010000>; 50 reg = <0xc0000000 0x00010000>; 56 interrupts = <0xe 0x2>; 57 reg = <0x00007000 0x00000400>; 62 reg = <0x00006000 0x00000050>; [all …]
|
/Linux-v6.1/fs/nls/ |
D | nls_ascii.c | 17 /* 0x00*/ 18 0x0000, 0x0001, 0x0002, 0x0003, 19 0x0004, 0x0005, 0x0006, 0x0007, 20 0x0008, 0x0009, 0x000a, 0x000b, 21 0x000c, 0x000d, 0x000e, 0x000f, 22 /* 0x10*/ 23 0x0010, 0x0011, 0x0012, 0x0013, 24 0x0014, 0x0015, 0x0016, 0x0017, 25 0x0018, 0x0019, 0x001a, 0x001b, 26 0x001c, 0x001d, 0x001e, 0x001f, [all …]
|
D | nls_koi8-r.c | 17 /* 0x00*/ 18 0x0000, 0x0001, 0x0002, 0x0003, 19 0x0004, 0x0005, 0x0006, 0x0007, 20 0x0008, 0x0009, 0x000a, 0x000b, 21 0x000c, 0x000d, 0x000e, 0x000f, 22 /* 0x10*/ 23 0x0010, 0x0011, 0x0012, 0x0013, 24 0x0014, 0x0015, 0x0016, 0x0017, 25 0x0018, 0x0019, 0x001a, 0x001b, 26 0x001c, 0x001d, 0x001e, 0x001f, [all …]
|
D | nls_cp1251.c | 17 /* 0x00*/ 18 0x0000, 0x0001, 0x0002, 0x0003, 19 0x0004, 0x0005, 0x0006, 0x0007, 20 0x0008, 0x0009, 0x000a, 0x000b, 21 0x000c, 0x000d, 0x000e, 0x000f, 22 /* 0x10*/ 23 0x0010, 0x0011, 0x0012, 0x0013, 24 0x0014, 0x0015, 0x0016, 0x0017, 25 0x0018, 0x0019, 0x001a, 0x001b, 26 0x001c, 0x001d, 0x001e, 0x001f, [all …]
|
/Linux-v6.1/drivers/net/wireless/zydas/zd1211rw/ |
D | zd_rf_rf2959.c | 15 RF_CHANNEL( 1) = { 0x181979, 0x1e6666 }, 16 RF_CHANNEL( 2) = { 0x181989, 0x1e6666 }, 17 RF_CHANNEL( 3) = { 0x181999, 0x1e6666 }, 18 RF_CHANNEL( 4) = { 0x1819a9, 0x1e6666 }, 19 RF_CHANNEL( 5) = { 0x1819b9, 0x1e6666 }, 20 RF_CHANNEL( 6) = { 0x1819c9, 0x1e6666 }, 21 RF_CHANNEL( 7) = { 0x1819d9, 0x1e6666 }, 22 RF_CHANNEL( 8) = { 0x1819e9, 0x1e6666 }, 23 RF_CHANNEL( 9) = { 0x1819f9, 0x1e6666 }, 24 RF_CHANNEL(10) = { 0x181a09, 0x1e6666 }, [all …]
|
D | zd_rf_al2230.c | 17 RF_CHANNEL( 1) = { 0x03f790, 0x033331, 0x00000d, }, 18 RF_CHANNEL( 2) = { 0x03f790, 0x0b3331, 0x00000d, }, 19 RF_CHANNEL( 3) = { 0x03e790, 0x033331, 0x00000d, }, 20 RF_CHANNEL( 4) = { 0x03e790, 0x0b3331, 0x00000d, }, 21 RF_CHANNEL( 5) = { 0x03f7a0, 0x033331, 0x00000d, }, 22 RF_CHANNEL( 6) = { 0x03f7a0, 0x0b3331, 0x00000d, }, 23 RF_CHANNEL( 7) = { 0x03e7a0, 0x033331, 0x00000d, }, 24 RF_CHANNEL( 8) = { 0x03e7a0, 0x0b3331, 0x00000d, }, 25 RF_CHANNEL( 9) = { 0x03f7b0, 0x033331, 0x00000d, }, 26 RF_CHANNEL(10) = { 0x03f7b0, 0x0b3331, 0x00000d, }, [all …]
|
D | zd_rf_al7230b.c | 15 RF_CHANNEL( 1) = { 0x09ec00, 0x8cccc8 }, 16 RF_CHANNEL( 2) = { 0x09ec00, 0x8cccd8 }, 17 RF_CHANNEL( 3) = { 0x09ec00, 0x8cccc0 }, 18 RF_CHANNEL( 4) = { 0x09ec00, 0x8cccd0 }, 19 RF_CHANNEL( 5) = { 0x05ec00, 0x8cccc8 }, 20 RF_CHANNEL( 6) = { 0x05ec00, 0x8cccd8 }, 21 RF_CHANNEL( 7) = { 0x05ec00, 0x8cccc0 }, 22 RF_CHANNEL( 8) = { 0x05ec00, 0x8cccd0 }, 23 RF_CHANNEL( 9) = { 0x0dec00, 0x8cccc8 }, 24 RF_CHANNEL(10) = { 0x0dec00, 0x8cccd8 }, [all …]
|
/Linux-v6.1/arch/alpha/kernel/ |
D | sys_eb64p.c | 42 outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26)); in eb64p_update_irq_hw() 71 pld = inb(0x26) | (inb(0x27) << 8); in eb64p_device_interrupt() 100 if (inw(0x806) != 0xffff) { in eb64p_init_irq() 114 outb(0xff, 0x26); in eb64p_init_irq() 115 outb(0xff, 0x27); in eb64p_init_irq() 125 if (request_irq(16 + 5, no_action, 0, "isa-cascade", NULL)) in eb64p_init_irq() 134 * Summary @ 0x26: 136 * 0 Interrupt Line A from slot 0 138 * 2 Interrupt Line B from slot 0 140 * 4 Interrupt Line C from slot 0 [all …]
|
/Linux-v6.1/arch/arm64/kernel/ |
D | sigreturn32.S | 25 .byte __NR_compat_sigreturn, 0x70, 0xa0, 0xe3 // mov r7, #__NR_compat_sigreturn 26 .byte __NR_compat_sigreturn, 0x00, 0x00, 0xef // svc #__NR_compat_sigreturn 31 .byte __NR_compat_sigreturn, 0x27 // svc #__NR_compat_sigreturn 32 .byte __NR_compat_sigreturn, 0xdf // mov r7, #__NR_compat_sigreturn 37 .byte __NR_compat_rt_sigreturn, 0x70, 0xa0, 0xe3 // mov r7, #__NR_compat_rt_sigreturn 38 .byte __NR_compat_rt_sigreturn, 0x00, 0x00, 0xef // svc #__NR_compat_rt_sigreturn 43 .byte __NR_compat_rt_sigreturn, 0x27 // svc #__NR_compat_rt_sigreturn 44 .byte __NR_compat_rt_sigreturn, 0xdf // mov r7, #__NR_compat_rt_sigreturn
|
/Linux-v6.1/Documentation/hwmon/ |
D | hih6130.rst | 27 I2C address 0x27 by default, so an entry with I2C_BOARD_INFO("hih6130", 0x27)
|
/Linux-v6.1/drivers/media/usb/gspca/ |
D | sn9c2028.c | 37 unsigned char to_read; /* length to read. 0 means no reply requested */ 46 .priv = 0}, 55 .priv = 0}, 64 command[0], command[1], command[2], in sn9c2028_command() 69 usb_sndctrlpipe(gspca_dev->dev, 0), in sn9c2028_command() 72 2, 0, gspca_dev->usb_buf, 6, 500); in sn9c2028_command() 73 if (rc < 0) { in sn9c2028_command() 75 gspca_dev->usb_buf[0], rc); in sn9c2028_command() 79 return 0; in sn9c2028_command() 87 usb_rcvctrlpipe(gspca_dev->dev, 0), in sn9c2028_read1() [all …]
|
/Linux-v6.1/drivers/hid/ |
D | hid-uclogic-rdesc-test.c | 22 [UCLOGIC_RDESC_PEN_PH_ID_X_LM] = 0xAA, 23 [UCLOGIC_RDESC_PEN_PH_ID_X_PM] = 0xBB, 24 [UCLOGIC_RDESC_PEN_PH_ID_Y_LM] = 0xCC, 25 [UCLOGIC_RDESC_PEN_PH_ID_Y_PM] = 0xDD, 26 [UCLOGIC_RDESC_PEN_PH_ID_PRESSURE_LM] = 0xEE, 30 [UCLOGIC_RDESC_PEN_PH_ID_X_LM] = 0xAA, 31 [UCLOGIC_RDESC_PEN_PH_ID_X_PM] = 0xBB, 35 [UCLOGIC_RDESC_FRAME_PH_ID_UM] = 0xFF, 39 static const __u8 template_small[] = { 0x00 }; 40 static const __u8 template_no_ph[] = { 0xAA, 0xFE, 0xAA, 0xED, 0x1D }; [all …]
|
/Linux-v6.1/drivers/hid/amd-sfh-hid/hid_descriptor/ |
D | amd_sfh_hid_report_desc.h | 15 0x05, 0x20, /* Usage page */ 16 0x09, 0x73, /* Motion type Accel 3D */ 17 0xA1, 0x00, /* HID Collection (Physical) */ 20 0x85, 1, /* HID Report ID */ 21 0x05, 0x20, /* HID usage page sensor */ 22 0x0A, 0x09, 0x03, /* Sensor property and sensor connection type */ 23 0x15, 0, /* HID logical MIN_8(0) */ 24 0x25, 2, /* HID logical MAX_8(2) */ 25 0x75, 8, /* HID report size(8) */ 26 0x95, 1, /* HID report count(1) */ [all …]
|