Home
last modified time | relevance | path

Searched +full:0 +full:x0a00 (Results 1 – 25 of 146) sorted by relevance

123456

/Linux-v5.15/drivers/clk/samsung/
Dclk-exynos5260.h15 #define MUX_SEL_AUD 0x0200
16 #define MUX_ENABLE_AUD 0x0300
17 #define MUX_STAT_AUD 0x0400
18 #define MUX_IGNORE_AUD 0x0500
19 #define DIV_AUD0 0x0600
20 #define DIV_AUD1 0x0604
21 #define DIV_STAT_AUD0 0x0700
22 #define DIV_STAT_AUD1 0x0704
23 #define EN_ACLK_AUD 0x0800
24 #define EN_PCLK_AUD 0x0900
[all …]
/Linux-v5.15/drivers/media/dvb-frontends/
Datbm8830_priv.h19 #define REG_CHIP_ID 0x0000
20 #define REG_TUNER_BASEBAND 0x0001
21 #define REG_DEMOD_RUN 0x0004
22 #define REG_DSP_RESET 0x0005
23 #define REG_RAM_RESET 0x0006
24 #define REG_ADC_RESET 0x0007
25 #define REG_TSPORT_RESET 0x0008
26 #define REG_BLKERR_POL 0x000C
27 #define REG_I2C_GATE 0x0103
28 #define REG_TS_SAMPLE_EDGE 0x0301
[all …]
/Linux-v5.15/arch/sh/include/mach-se/mach/
Dmrshpc.h9 if ((__raw_readw(MRSHPC_CSR) & 0x000c) != 0) in mrshpc_setup_windows()
12 if ((__raw_readw(MRSHPC_CSR) & 0x0080) == 0) { in mrshpc_setup_windows()
13 __raw_writew(0x0674, MRSHPC_CPWCR); /* Card Vcc is 3.3v? */ in mrshpc_setup_windows()
15 __raw_writew(0x0678, MRSHPC_CPWCR); /* Card Vcc is 5V */ in mrshpc_setup_windows()
23 __raw_writew(0x8a84, MRSHPC_MW0CR1); in mrshpc_setup_windows()
24 if((__raw_readw(MRSHPC_CSR) & 0x4000) != 0) in mrshpc_setup_windows()
26 __raw_writew(0x0b00, MRSHPC_MW0CR2); in mrshpc_setup_windows()
28 /* common mode & bus width 16bit SWAP = 0*/ in mrshpc_setup_windows()
29 __raw_writew(0x0300, MRSHPC_MW0CR2); in mrshpc_setup_windows()
32 __raw_writew(0x8a85, MRSHPC_MW1CR1); in mrshpc_setup_windows()
[all …]
/Linux-v5.15/arch/arm/boot/dts/
Domap3xxx-clocks.dtsi9 #clock-cells = <0>;
15 #clock-cells = <0>;
18 reg = <0x0d40>;
22 #clock-cells = <0>;
27 reg = <0x1270>;
32 #clock-cells = <0>;
35 reg = <0x0d70>;
40 #clock-cells = <0>;
48 #clock-cells = <0>;
56 #clock-cells = <0>;
[all …]
Domap3430es1-clocks.dtsi9 #clock-cells = <0>;
12 reg = <0x0b10>;
13 ti,bit-shift = <0>;
17 #clock-cells = <0>;
21 reg = <0x0b40>;
26 #clock-cells = <0>;
34 #clock-cells = <0>;
37 reg = <0x0b00>;
42 #clock-cells = <0>;
45 reg = <0x0b00>;
[all …]
Domap34xx-omap36xx-clocks.dtsi9 #clock-cells = <0>;
17 #clock-cells = <0>;
21 reg = <0x0a14>;
25 #clock-cells = <0>;
28 reg = <0x0a14>;
33 #clock-cells = <0>;
36 reg = <0x0a14>;
41 #clock-cells = <0>;
44 reg = <0x0a14>;
45 ti,bit-shift = <0>;
[all …]
Dam35xx-clocks.dtsi9 #clock-cells = <0>;
12 reg = <0x032c>;
17 #clock-cells = <0>;
20 reg = <0x032c>;
25 #clock-cells = <0>;
28 reg = <0x032c>;
33 #clock-cells = <0>;
36 reg = <0x032c>;
41 #clock-cells = <0>;
44 reg = <0x032c>;
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/clock/ti/
Dgate.txt33 - #clock-cells : from common clock binding; shall be set to 0
46 #clock-cells = <0>;
49 reg = <0x0a00>;
54 #clock-cells = <0>;
57 reg = <0x0a00>;
62 #clock-cells = <0>;
65 reg = <0x0e00>;
66 ti,bit-shift = <0>;
70 #clock-cells = <0>;
73 reg = <0x059c>;
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/phy/
Dmediatek,tphy.yaml15 controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
22 shared 0x0000 SPLLC
23 0x0100 FMREG
24 u2 port0 0x0800 U2PHY_COM
25 u3 port0 0x0900 U3PHYD
26 0x0a00 U3PHYD_BANK2
27 0x0b00 U3PHYA
28 0x0c00 U3PHYA_DA
29 u2 port1 0x1000 U2PHY_COM
30 u3 port1 0x1100 U3PHYD
[all …]
/Linux-v5.15/arch/arm/mach-omap2/
Dprcm_mpu7xx.h24 #define DRA7XX_PRCM_MPU_BASE 0x48243000
30 #define DRA7XX_MPU_PRCM_OCP_SOCKET_INST 0x0000
31 #define DRA7XX_MPU_PRCM_DEVICE_INST 0x0200
32 #define DRA7XX_MPU_PRCM_PRM_C0_INST 0x0400
33 #define DRA7XX_MPU_PRCM_CM_C0_INST 0x0600
34 #define DRA7XX_MPU_PRCM_PRM_C1_INST 0x0800
35 #define DRA7XX_MPU_PRCM_CM_C1_INST 0x0a00
38 #define DRA7XX_MPU_PRCM_CM_C0_CPU0_CDOFFS 0x0000
39 #define DRA7XX_MPU_PRCM_CM_C1_CPU1_CDOFFS 0x0000
45 #define DRA7XX_REVISION_PRCM_MPU_OFFSET 0x0000
[all …]
Dprcm_mpu54xx.h24 #define OMAP54XX_PRCM_MPU_BASE 0x48243000
30 #define OMAP54XX_PRCM_MPU_OCP_SOCKET_INST 0x0000
31 #define OMAP54XX_PRCM_MPU_DEVICE_INST 0x0200
32 #define OMAP54XX_PRCM_MPU_PRM_C0_INST 0x0400
33 #define OMAP54XX_PRCM_MPU_CM_C0_INST 0x0600
34 #define OMAP54XX_PRCM_MPU_PRM_C1_INST 0x0800
35 #define OMAP54XX_PRCM_MPU_CM_C1_INST 0x0a00
38 #define OMAP54XX_PRCM_MPU_CM_C0_CPU0_CDOFFS 0x0000
39 #define OMAP54XX_PRCM_MPU_CM_C1_CPU1_CDOFFS 0x0000
52 #define OMAP54XX_REVISION_PRCM_MPU_OFFSET 0x0000
[all …]
Dcm2_54xx.h22 #define OMAP54XX_CM_CORE_BASE 0x4a008000
28 #define OMAP54XX_CM_CORE_OCP_SOCKET_INST 0x0000
29 #define OMAP54XX_CM_CORE_CKGEN_INST 0x0100
30 #define OMAP54XX_CM_CORE_COREAON_INST 0x0600
31 #define OMAP54XX_CM_CORE_CORE_INST 0x0700
32 #define OMAP54XX_CM_CORE_IVA_INST 0x1200
33 #define OMAP54XX_CM_CORE_CAM_INST 0x1300
34 #define OMAP54XX_CM_CORE_DSS_INST 0x1400
35 #define OMAP54XX_CM_CORE_GPU_INST 0x1500
36 #define OMAP54XX_CM_CORE_L3INIT_INST 0x1600
[all …]
Dprcm43xx.h18 #define AM43XX_PRM_OCP_SOCKET_INST 0x0000
19 #define AM43XX_PRM_MPU_INST 0x0300
20 #define AM43XX_PRM_GFX_INST 0x0400
21 #define AM43XX_PRM_RTC_INST 0x0500
22 #define AM43XX_PRM_TAMPER_INST 0x0600
23 #define AM43XX_PRM_CEFUSE_INST 0x0700
24 #define AM43XX_PRM_PER_INST 0x0800
25 #define AM43XX_PRM_WKUP_INST 0x2000
26 #define AM43XX_PRM_DEVICE_INST 0x4000
29 #define AM43XX_PRM_IRQSTATUS_MPU_OFFSET 0x0004
[all …]
/Linux-v5.15/drivers/clk/bcm/
Dclk-bcm281xx.c24 .gate = HW_SW_GATE(0x214, 16, 0, 1),
25 .trig = TRIGGER(0x0e04, 0),
26 .div = FRAC_DIVIDER(0x0e00, 0, 22, 16),
42 .gate = HW_SW_GATE(0x0414, 16, 0, 1),
46 .sel = SELECTOR(0x0a10, 0, 2),
47 .trig = TRIGGER(0x0a40, 4),
51 .gate = HW_SW_GATE(0x0418, 16, 0, 1),
55 .sel = SELECTOR(0x0a04, 0, 2),
56 .div = DIVIDER(0x0a04, 3, 4),
57 .trig = TRIGGER(0x0a40, 0),
[all …]
/Linux-v5.15/drivers/media/rc/keymaps/
Drc-technisat-usb2.c32 {0x0a0c, KEY_POWER},
33 {0x0a01, KEY_NUMERIC_1},
34 {0x0a02, KEY_NUMERIC_2},
35 {0x0a03, KEY_NUMERIC_3},
36 {0x0a0d, KEY_MUTE},
37 {0x0a04, KEY_NUMERIC_4},
38 {0x0a05, KEY_NUMERIC_5},
39 {0x0a06, KEY_NUMERIC_6},
40 {0x0a38, KEY_VIDEO}, /* EXT */
41 {0x0a07, KEY_NUMERIC_7},
[all …]
/Linux-v5.15/sound/soc/codecs/
Dmt6351.h12 #define MT6351_AFE_UL_DL_CON0 (0x2000 + 0x0000)
13 #define MT6351_AFE_DL_SRC2_CON0_H (0x2000 + 0x0002)
14 #define MT6351_AFE_DL_SRC2_CON0_L (0x2000 + 0x0004)
15 #define MT6351_AFE_DL_SDM_CON0 (0x2000 + 0x0006)
16 #define MT6351_AFE_DL_SDM_CON1 (0x2000 + 0x0008)
17 #define MT6351_AFE_UL_SRC_CON0_H (0x2000 + 0x000a)
18 #define MT6351_AFE_UL_SRC_CON0_L (0x2000 + 0x000c)
19 #define MT6351_AFE_UL_SRC_CON1_H (0x2000 + 0x000e)
20 #define MT6351_AFE_UL_SRC_CON1_L (0x2000 + 0x0010)
21 #define MT6351_AFE_TOP_CON0 (0x2000 + 0x0012)
[all …]
/Linux-v5.15/arch/m68k/include/asm/
Dmcfpit.h18 #define MCFPIT_PCSR 0x0 /* PIT control register */
19 #define MCFPIT_PMR 0x2 /* PIT modulus register */
20 #define MCFPIT_PCNTR 0x4 /* PIT count register */
25 #define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */
26 #define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */
27 #define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */
28 #define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */
29 #define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */
30 #define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */
31 #define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */
[all …]
/Linux-v5.15/drivers/net/dsa/mv88e6xxx/
Dport.h16 /* Offset 0x00: Port Status Register */
17 #define MV88E6XXX_PORT_STS 0x00
18 #define MV88E6XXX_PORT_STS_PAUSE_EN 0x8000
19 #define MV88E6XXX_PORT_STS_MY_PAUSE 0x4000
20 #define MV88E6XXX_PORT_STS_HD_FLOW 0x2000
21 #define MV88E6XXX_PORT_STS_PHY_DETECT 0x1000
22 #define MV88E6250_PORT_STS_LINK 0x1000
23 #define MV88E6250_PORT_STS_PORTMODE_MASK 0x0f00
24 #define MV88E6250_PORT_STS_PORTMODE_PHY_10_HALF 0x0800
25 #define MV88E6250_PORT_STS_PORTMODE_PHY_100_HALF 0x0900
[all …]
/Linux-v5.15/lib/
Dcrc16.c10 /** CRC table for the CRC-16. The poly is 0x8005 (x^16 + x^15 + x^2 + 1) */
12 0x0000, 0xC0C1, 0xC181, 0x0140, 0xC301, 0x03C0, 0x0280, 0xC241,
13 0xC601, 0x06C0, 0x0780, 0xC741, 0x0500, 0xC5C1, 0xC481, 0x0440,
14 0xCC01, 0x0CC0, 0x0D80, 0xCD41, 0x0F00, 0xCFC1, 0xCE81, 0x0E40,
15 0x0A00, 0xCAC1, 0xCB81, 0x0B40, 0xC901, 0x09C0, 0x0880, 0xC841,
16 0xD801, 0x18C0, 0x1980, 0xD941, 0x1B00, 0xDBC1, 0xDA81, 0x1A40,
17 0x1E00, 0xDEC1, 0xDF81, 0x1F40, 0xDD01, 0x1DC0, 0x1C80, 0xDC41,
18 0x1400, 0xD4C1, 0xD581, 0x1540, 0xD701, 0x17C0, 0x1680, 0xD641,
19 0xD201, 0x12C0, 0x1380, 0xD341, 0x1100, 0xD1C1, 0xD081, 0x1040,
20 0xF001, 0x30C0, 0x3180, 0xF141, 0x3300, 0xF3C1, 0xF281, 0x3240,
[all …]
/Linux-v5.15/drivers/tty/serial/
Ddz.h18 #define DZ_TRDY 0x8000 /* Transmitter empty */
19 #define DZ_TIE 0x4000 /* Transmitter Interrupt Enbl */
20 #define DZ_TLINE 0x0300 /* Transmitter Line Number */
21 #define DZ_RDONE 0x0080 /* Receiver data ready */
22 #define DZ_RIE 0x0040 /* Receive Interrupt Enable */
23 #define DZ_MSE 0x0020 /* Master Scan Enable */
24 #define DZ_CLR 0x0010 /* Master reset */
25 #define DZ_MAINT 0x0008 /* Loop Back Mode */
30 #define DZ_RBUF_MASK 0x00FF /* Data Mask */
31 #define DZ_LINE_MASK 0x0300 /* Line Mask */
[all …]
/Linux-v5.15/arch/mips/include/asm/mach-ar7/
Dar7.h16 #define AR7_SDRAM_BASE 0x14000000
18 #define AR7_REGS_BASE 0x08610000
20 #define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000)
21 #define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900)
22 /* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */
23 #define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00)
24 #define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80)
25 #define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20)
26 #define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00)
27 #define AR7_REGS_USB (AR7_REGS_BASE + 0x1200)
[all …]
/Linux-v5.15/drivers/media/i2c/
Dhi556.c23 #define HI556_REG_CHIP_ID 0x0f16
24 #define HI556_CHIP_ID 0x0556
26 #define HI556_REG_MODE_SELECT 0x0a00
27 #define HI556_MODE_STANDBY 0x0000
28 #define HI556_MODE_STREAMING 0x0100
31 #define HI556_REG_FLL 0x0006
32 #define HI556_FLL_30FPS 0x0814
33 #define HI556_FLL_30FPS_MIN 0x0814
34 #define HI556_FLL_MAX 0x7fff
37 #define HI556_REG_LLP 0x0008
[all …]
/Linux-v5.15/sound/pci/cs46xx/
Ddsp_spos.h18 #define DSP_CODE_BYTE_SIZE 0x00007000UL
19 #define DSP_PARAMETER_BYTE_SIZE 0x00003000UL
20 #define DSP_SAMPLE_BYTE_SIZE 0x00003800UL
21 #define DSP_PARAMETER_BYTE_OFFSET 0x00000000UL
22 #define DSP_SAMPLE_BYTE_OFFSET 0x00010000UL
23 #define DSP_CODE_BYTE_OFFSET 0x00020000UL
25 #define WIDE_INSTR_MASK 0x0040
26 #define WIDE_LADD_INSTR_MASK 0x0380
32 WIDE_FOR_BEGIN_LOOP = 0x20,
35 WIDE_COND_GOTO_ADDR = 0x30,
[all …]
/Linux-v5.15/drivers/net/ethernet/ti/
Dnetcp_xgbepcsr.c13 #define XGBE_CTRL_OFFSET 0x0c
14 #define XGBE_SGMII_1_OFFSET 0x0114
15 #define XGBE_SGMII_2_OFFSET 0x0214
18 #define PCSR_CPU_CTRL_OFFSET 0x1fd0
31 #define PHY_A(serdes) 0
40 {0x0000, 0x00800002, 0x00ff00ff},
41 {0x0014, 0x00003838, 0x0000ffff},
42 {0x0060, 0x1c44e438, 0xffffffff},
43 {0x0064, 0x00c18400, 0x00ffffff},
44 {0x0068, 0x17078200, 0xffffff00},
[all …]
/Linux-v5.15/drivers/block/
Dswim_asm.S17 .equ write_data, 0x0000
18 .equ write_mark, 0x0200
19 .equ write_CRC, 0x0400
20 .equ write_parameter,0x0600
21 .equ write_phase, 0x0800
22 .equ write_setup, 0x0a00
23 .equ write_mode0, 0x0c00
24 .equ write_mode1, 0x0e00
25 .equ read_data, 0x1000
26 .equ read_mark, 0x1200
[all …]

123456