/Linux-v6.6/Documentation/devicetree/bindings/net/ |
D | motorcomm,yt8xxx.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Frank Sae <frank.sae@motor-comm.com> 13 - $ref: ethernet-phy.yaml# 18 - ethernet-phy-id4f51.e91a 19 - ethernet-phy-id4f51.e91b 21 rx-internal-delay-ps: 24 internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds. 25 enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650, [all …]
|
D | micrel-ksz90x1.txt | 8 Note that these settings are applied after any phy-specific fixup from 15 value is 0, the maximum value is 3000, and it can be specified in 200ps 17 skew values actually increase in 120ps steps, starting from -840ps. The 28 ----------------------------------------------------- 29 0 -840ps 0000 30 200 -720ps 0001 31 400 -600ps 0010 32 600 -480ps 0011 33 800 -360ps 0100 34 1000 -240ps 0101 [all …]
|
D | amlogic,meson-dwmac.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 4 --- 5 $id: http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 11 - Neil Armstrong <neil.armstrong@linaro.org> 12 - Martin Blumenstingl <martin.blumenstingl@googlemail.com> 20 - amlogic,meson6-dwmac 21 - amlogic,meson8b-dwmac 22 - amlogic,meson8m2-dwmac 23 - amlogic,meson-gxbb-dwmac [all …]
|
/Linux-v6.6/Documentation/devicetree/bindings/display/bridge/ |
D | adi,adv7511.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Laurent Pinchart <laurent.pinchart@ideasonboard.com> 21 - adi,adv7511 22 - adi,adv7511w 23 - adi,adv7513 37 reg-names: 40 needing a non-default address. 43 - const: main [all …]
|
/Linux-v6.6/drivers/net/wireless/ath/ |
D | dfs_pattern_detector.c | 25 * struct radar_types - contains array of patterns defined for one DFS domain 38 #define PPB_THRESH_RATE(PPB, RATE) ((PPB * RATE + 100 - RATE) / 100) 43 #define WIDTH_LOWER(X) ((X*(100-WIDTH_TOLERANCE)+50)/100) 49 (PRF2PRI(PMAX) - PRI_TOLERANCE), \ 54 /* radar types as defined by ETSI EN-301-893 v1.5.1 */ 62 ETSI_PATTERN(6, 0, 2, 400, 1200, 3, 15, false), 74 PMIN - PRI_TOLERANCE, \ 106 PMIN - PRI_TOLERANCE, \ 135 * get_dfs_domain_radar_types() - get radar types for a given DFS domain 145 if (dfs_domains[i]->region == region) in get_dfs_domain_radar_types() [all …]
|
/Linux-v6.6/arch/alpha/ |
D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0 42 The Alpha is a 64-bit general-purpose processor designed and 44 now Hewlett-Packard. The Alpha Linux project has a home page at 91 Alcor/Alpha-XLT AS 600, AS 500, XL-300, XL-366 92 Alpha-XL XL-233, XL-266 102 LX164 AlphaPC164-LX 110 Rawhide AS 1200, AS 4000, AS 4100 111 Ruffian RPX164-2, AlphaPC164-UX, AlphaPC164-BX 112 SX164 AlphaPC164-SX 129 bool "Alcor/Alpha-XLT" [all …]
|
/Linux-v6.6/drivers/net/wireless/quantenna/qtnfmac/pcie/ |
D | pearl_pcie.c | 1 // SPDX-License-Identifier: GPL-2.0+ 100 static inline void qtnf_init_hdp_irqs(struct qtnf_pcie_pearl_state *ps) in qtnf_init_hdp_irqs() argument 104 spin_lock_irqsave(&ps->irq_lock, flags); in qtnf_init_hdp_irqs() 105 ps->pcie_irq_mask = (PCIE_HDP_INT_RX_BITS | PCIE_HDP_INT_TX_BITS); in qtnf_init_hdp_irqs() 106 spin_unlock_irqrestore(&ps->irq_lock, flags); in qtnf_init_hdp_irqs() 109 static inline void qtnf_enable_hdp_irqs(struct qtnf_pcie_pearl_state *ps) in qtnf_enable_hdp_irqs() argument 113 spin_lock_irqsave(&ps->irq_lock, flags); in qtnf_enable_hdp_irqs() 114 writel(ps->pcie_irq_mask, PCIE_HDP_INT_EN(ps->pcie_reg_base)); in qtnf_enable_hdp_irqs() 115 spin_unlock_irqrestore(&ps->irq_lock, flags); in qtnf_enable_hdp_irqs() 118 static inline void qtnf_disable_hdp_irqs(struct qtnf_pcie_pearl_state *ps) in qtnf_disable_hdp_irqs() argument [all …]
|
/Linux-v6.6/drivers/gpu/drm/amd/pm/powerplay/hwmgr/ |
D | smu10_hwmgr.c | 27 #include "atom-types.h" 54 struct smu10_hwmgr *smu10_data = (struct smu10_hwmgr *)(hwmgr->backend); in smu10_display_clock_voltage_request() 55 enum amd_pp_clock_type clk_type = clock_req->clock_type; in smu10_display_clock_voltage_request() 56 uint32_t clk_freq = clock_req->clock_freq_in_khz / 1000; in smu10_display_clock_voltage_request() 61 if (clk_freq == smu10_data->dcf_actual_hard_min_freq) in smu10_display_clock_voltage_request() 64 smu10_data->dcf_actual_hard_min_freq = clk_freq; in smu10_display_clock_voltage_request() 70 if (clk_freq == smu10_data->f_actual_hard_min_freq) in smu10_display_clock_voltage_request() 72 smu10_data->f_actual_hard_min_freq = clk_freq; in smu10_display_clock_voltage_request() 77 return -EINVAL; in smu10_display_clock_voltage_request() 86 if (SMU10_Magic != hw_ps->magic) in cast_smu10_ps() [all …]
|
D | smu7_hwmgr.c | 30 #include <asm/intel-family.h> 180 PP_ASSERT_WITH_CODE((PhwVIslands_Magic == hw_ps->magic), in cast_phw_smu7_power_state() 190 PP_ASSERT_WITH_CODE((PhwVIslands_Magic == hw_ps->magic), in cast_const_phw_smu7_power_state() 198 * smu7_get_mc_microcode_version - Find the MC microcode version and store it in the HwMgr struct 205 cgs_write_register(hwmgr->device, mmMC_SEQ_IO_DEBUG_INDEX, 0x9F); in smu7_get_mc_microcode_version() 207 hwmgr->microcode_version_info.MC = cgs_read_register(hwmgr->device, mmMC_SEQ_IO_DEBUG_DATA); in smu7_get_mc_microcode_version() 217 speedCntl = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__PCIE, in smu7_get_current_pcie_speed() 228 link_width = PHM_READ_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__PCIE, in smu7_get_current_pcie_lane_number() 238 * smu7_enable_smc_voltage_controller - Enable voltage control 245 if (hwmgr->chip_id >= CHIP_POLARIS10 && in smu7_enable_smc_voltage_controller() [all …]
|
/Linux-v6.6/tools/power/x86/intel_pstate_tracer/ |
D | intel_pstate_tracer.py | 2 # SPDX-License-Identifier: GPL-2.0-only 3 # -*- coding: utf-8 -*- 7 - If there is Linux trace file with pstate_sample events enabled, then 9 - If user has not specified a trace file as input via command line parameters, 16 gnuplot-py 1.8 or higher 18 gnuplot-py, phython-gnuplot or phython3-gnuplot, gnuplot-nox, ... ) 20 HWP (Hardware P-States are disabled) 79 print(' ./%s_tracer.py [-c cpus] -t <trace_file> -n <test_name>'%driver_name) 81 …print(' ./%s_tracer.py [--cpu cpus] ---trace_file <trace_file> --name <test_name>'%driver_nam… 83 … print(' sudo ./%s_tracer.py [-c cpus] -i <interval> -n <test_name> -m <kbytes>'%driver_name) [all …]
|
/Linux-v6.6/drivers/input/mouse/ |
D | sermouse.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * Copyright (c) 1999-2001 Vojtech Pavlik 39 * second, which is as good as a PS/2 or USB mouse. 44 struct input_dev *dev = sermouse->dev; in sermouse_process_msc() 45 signed char *buf = sermouse->buf; in sermouse_process_msc() 47 switch (sermouse->count) { in sermouse_process_msc() 60 input_report_rel(dev, REL_Y, -buf[1]); in sermouse_process_msc() 61 buf[0] = data - data / 2; in sermouse_process_msc() 67 input_report_rel(dev, REL_Y, buf[1] - data); in sermouse_process_msc() 74 if (++sermouse->count == 5) in sermouse_process_msc() [all …]
|
/Linux-v6.6/drivers/net/phy/ |
D | motorcomm.c | 1 // SPDX-License-Identifier: GPL-2.0+ 6 * Author: Frank <Frank.Sae@motor-comm.com> 22 * ------------------------------------------------------------ 26 * ------------------------------------------------------------ 28 * ------------------------------------------------------------ 104 /* FIBER Auto-Negotiation link partner ability */ 125 /* TX Gig-E Delay is bits 7:4, default 0x5 126 * TX Fast-E Delay is bits 15:12, default 0xf 127 * Delay = 150ps * N - 250ps 128 * On = 2000ps, off = 50ps [all …]
|
/Linux-v6.6/drivers/eisa/ |
D | eisa.ids | 6 # Marc Zyngier <maz@wild-wind.fr.eu.org> 10 ABP0510 "Advansys ABP-510 ISA SCSI Host Adapter" 11 ABP0540 "Advansys ABP-540/542 ISA SCSI Host Adapter" 12 ABP7401 "AdvanSys ABP-740/742 EISA Single Channel SCSI Host Adapter" 13 ABP7501 "AdvanSys ABP-750/752 EISA Dual Channel SCSI Host Adapter" 14 ACC1200 "ACCTON EtherCombo-32 Ethernet Adapter" 15 ACC120A "ACCTON EtherCombo-32 Ethernet Adapter" 25 ACE7010 "ACME Multi-Function Board" 26 ACR1201 "Acer 1200 486/25 EISA System Board" 39 ACR1711 "AcerFrame 1000 486/33 SYSTEM-2" [all …]
|
/Linux-v6.6/arch/sparc/kernel/ |
D | pcic.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * pcic.c: MicroSPARC-IIep PCI controller support 11 * CP-1200 by Eric Brower. 48 * schematics. And this actually sucks. -- zaitcev 1999/05/12 73 * JavaEngine-1 apparently has different versions. 75 * According to communications with Sun folks, for P2 build 501-4628-03: 76 * pin 0 - parallel, audio; 77 * pin 1 - Ethernet; 78 * pin 2 - su; 79 * pin 3 - PS/2 kbd and mouse. [all …]
|
/Linux-v6.6/Documentation/admin-guide/ |
D | devices.txt | 1 0 Unnamed devices (e.g. non-device mounts) 7 2 = /dev/kmem OBSOLETE - replaced by /proc/kcore 11 6 = /dev/core OBSOLETE - replaced by /proc/kcore 18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore 31 2 char Pseudo-TTY masters 37 Pseudo-tty's are named as follows: 40 the 1st through 16th series of 16 pseudo-ttys each, and 44 These are the old-style (BSD) PTY devices; Unix98 62 20 = /dev/fd?h360 5.25" 360K in a 1200K drive(1) 63 48 = /dev/fd?h410 5.25" 410K in a 1200K drive [all …]
|
/Linux-v6.6/drivers/bluetooth/ |
D | btnxpuart.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 65 /* Default ps timeout period in milliseconds */ 114 u8 target_ps_mode; /* ps mode to be set */ 291 struct ps_data *psdata = &nxpdev->psdata; in nxp_drv_send_cmd() 297 psdata->driver_sent_cmd = true; in nxp_drv_send_cmd() 299 psdata->driver_sent_cmd = false; in nxp_drv_send_cmd() 306 if (schedule_work(&nxpdev->tx_work)) in btnxpuart_tx_wakeup() 307 set_bit(BTNXPUART_TX_STATE_ACTIVE, &nxpdev->tx_state); in btnxpuart_tx_wakeup() 313 struct ps_data *psdata = &nxpdev->psdata; in ps_start_timer() 318 if (psdata->cur_psmode == PS_MODE_ENABLE) in ps_start_timer() [all …]
|
/Linux-v6.6/drivers/net/wireless/ath/ath10k/ |
D | mac.c | 1 // SPDX-License-Identifier: ISC 3 * Copyright (c) 2005-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. 24 #include "wmi-tlv.h" 25 #include "wmi-ops.h" 98 #define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - \ 133 for (i = 0; i < sband->n_bitrates; i++) { in ath10k_mac_hw_rate_to_idx() 134 rate = &sband->bitrates[i]; in ath10k_mac_hw_rate_to_idx() 136 if (ath10k_mac_bitrate_is_cck(rate->bitrate) != cck) in ath10k_mac_hw_rate_to_idx() [all …]
|
/Linux-v6.6/drivers/staging/rtl8192u/ieee80211/ |
D | rtl819x_HTProc.c | 1 // SPDX-License-Identifier: GPL-2.0 30 90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200, 61 PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; in HTUpdateDefaultSetting() 62 //const typeof( ((struct ieee80211_device *)0)->pHTInfo ) *__mptr = &pHTInfo; in HTUpdateDefaultSetting() 67 pHTInfo->bRegShortGI20MHz = 1; in HTUpdateDefaultSetting() 68 pHTInfo->bRegShortGI40MHz = 1; in HTUpdateDefaultSetting() 71 pHTInfo->bRegBW40MHz = 1; in HTUpdateDefaultSetting() 74 if (pHTInfo->bRegBW40MHz) in HTUpdateDefaultSetting() 75 pHTInfo->bRegSuppCCK = 1; in HTUpdateDefaultSetting() 77 pHTInfo->bRegSuppCCK = true; in HTUpdateDefaultSetting() [all …]
|
/Linux-v6.6/drivers/gpu/drm/kmb/ |
D | kmb_dsi.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright © 2019-2020 Intel Corporation 147 {.default_bit_rate_mbps = 1200, .hsfreqrange_code = 0x0B}, 178 clk_disable_unprepare(kmb_dsi->clk_mipi); in kmb_dsi_clk_disable() 179 clk_disable_unprepare(kmb_dsi->clk_mipi_ecfg); in kmb_dsi_clk_disable() 180 clk_disable_unprepare(kmb_dsi->clk_mipi_cfg); in kmb_dsi_clk_disable() 186 mipi_dsi_host_unregister(kmb_dsi->host); in kmb_dsi_host_unregister() 225 return -ENOMEM; in kmb_dsi_host_bridge_init() 227 dsi_host->ops = &kmb_dsi_host_ops; in kmb_dsi_host_bridge_init() 233 return -ENOMEM; in kmb_dsi_host_bridge_init() [all …]
|
/Linux-v6.6/drivers/net/wireless/intel/iwlwifi/dvm/ |
D | commands.h | 1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 3 * Copyright (C) 2005-2014 Intel Corporation 7 * Please use iwl-xxxx-hw.h for hardware-related definitions. 29 /* Multi-Station support */ 93 /* RF-KILL commands and notifications */ 138 * - 4 standard TX queues 139 * - the command queue 140 * - 4 PAN TX queues 141 * - the PAN multicast queue, and 142 * - the AUX (TX during scan dwell) queue. [all …]
|
/Linux-v6.6/ |
D | CREDITS | 1 This is at least a partial credits-file of people that have 4 scripts. The fields are: name (N), email (E), web-address 6 snail-mail address (S). 10 ---------- 51 D: in-kernel DRM Maintainer 71 E: tim_alpaerts@toyota-motor-europe.com 75 S: B-2610 Wilrijk-Antwerpen 80 W: http://www-stu.christs.cam.ac.uk/~aia21/ 101 D: Maintainer of ide-cd and Uniform CD-ROM driver, 102 D: ATAPI CD-Changer support, Major 2.1.x CD-ROM update. [all …]
|
/Linux-v6.6/drivers/net/wireless/realtek/rtw88/ |
D | fw.c | 1 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause 2 /* Copyright(c) 2018-2019 Realtek Corporation 16 #include "ps.h" 27 sub_cmd_id = c2h->payload[0]; in rtw_fw_c2h_cmd_handle_ext() 52 return 1200; in get_max_amsdu_len() 74 struct rtw_sta_info *si = (struct rtw_sta_info *)sta->drv_priv; in rtw_fw_ra_report_iter() 79 mac_id = GET_RA_REPORT_MACID(ra_data->payload); in rtw_fw_ra_report_iter() 80 if (si->mac_id != mac_id) in rtw_fw_ra_report_iter() 83 si->ra_report.txrate.flags = 0; in rtw_fw_ra_report_iter() 85 rate = GET_RA_REPORT_RATE(ra_data->payload); in rtw_fw_ra_report_iter() [all …]
|
/Linux-v6.6/drivers/net/wireless/realtek/rtw89/ |
D | phy.c | 1 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause 2 /* Copyright(c) 2019-2020 Realtek Corporation 10 #include "ps.h" 19 u32 bit_rate = report->bit_rate; in get_max_amsdu_len() 26 if (report->might_fallback_legacy) in get_max_amsdu_len() 31 return 1200; in get_max_amsdu_len() 41 return rtwdev->chip->max_amsdu_limit; in get_max_amsdu_len() 57 ra_mask |= GENMASK_ULL(highest_mcs - gap, 0) << nss; in get_mcs_ra_mask() 60 ra_mask |= GENMASK_ULL(highest_mcs - gap * 2, 0) << nss; in get_mcs_ra_mask() 72 struct ieee80211_sta_he_cap cap = sta->deflink.he_cap; in get_he_ra_mask() [all …]
|
/Linux-v6.6/drivers/net/ethernet/sfc/ |
D | mcdi_pcol.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */ 4 * Copyright 2009-2018 Solarflare Communications Inc. 5 * Copyright 2019-2020 Xilinx Inc. 13 /* Power-on reset state */ 35 /* The 'doorbell' addresses are hard-wired to alert the MC when written */ 38 /* The rest of these are firmware-defined */ 46 /* Values to be written to the per-port status dword in shared 71 * | | \--- Response 72 * | \------- Error 73 * \------------------------------ Resync (always set) [all …]
|
/Linux-v6.6/drivers/scsi/lpfc/ |
D | lpfc_sli.c | 4 * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term * 6 * Copyright (C) 2004-2016 Emulex. All rights reserved. * 9 * Portions Copyright (C) 2004-2005 Christoph Hellwig * 17 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * 110 /* Word 0, 1, 2 - BDE is variable */ in lpfc_wqe_cmd_template() 112 /* Word 3 - cmd_buff_len, payload_offset_len is zero */ in lpfc_wqe_cmd_template() 114 /* Word 4 - total_xfer_len is variable */ in lpfc_wqe_cmd_template() 116 /* Word 5 - is zero */ in lpfc_wqe_cmd_template() 118 /* Word 6 - ctxt_tag, xri_tag is variable */ in lpfc_wqe_cmd_template() 121 bf_set(wqe_cmnd, &wqe->fcp_iread.wqe_com, CMD_FCP_IREAD64_WQE); in lpfc_wqe_cmd_template() [all …]
|