1 /*
2 * This file is part of the Chelsio T4 Ethernet driver for Linux.
3 *
4 * Copyright (c) 2003-2016 Chelsio Communications, Inc. All rights reserved.
5 *
6 * This software is available to you under a choice of one of two
7 * licenses. You may choose to be licensed under the terms of the GNU
8 * General Public License (GPL) Version 2, available from the file
9 * COPYING in the main directory of this source tree, or the
10 * OpenIB.org BSD license below:
11 *
12 * Redistribution and use in source and binary forms, with or
13 * without modification, are permitted provided that the following
14 * conditions are met:
15 *
16 * - Redistributions of source code must retain the above
17 * copyright notice, this list of conditions and the following
18 * disclaimer.
19 *
20 * - Redistributions in binary form must reproduce the above
21 * copyright notice, this list of conditions and the following
22 * disclaimer in the documentation and/or other materials
23 * provided with the distribution.
24 *
25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
32 * SOFTWARE.
33 */
34
35 #include <linux/delay.h>
36 #include "cxgb4.h"
37 #include "t4_regs.h"
38 #include "t4_values.h"
39 #include "t4fw_api.h"
40 #include "t4fw_version.h"
41
42 /**
43 * t4_wait_op_done_val - wait until an operation is completed
44 * @adapter: the adapter performing the operation
45 * @reg: the register to check for completion
46 * @mask: a single-bit field within @reg that indicates completion
47 * @polarity: the value of the field when the operation is completed
48 * @attempts: number of check iterations
49 * @delay: delay in usecs between iterations
50 * @valp: where to store the value of the register at completion time
51 *
52 * Wait until an operation is completed by checking a bit in a register
53 * up to @attempts times. If @valp is not NULL the value of the register
54 * at the time it indicated completion is stored there. Returns 0 if the
55 * operation completes and -EAGAIN otherwise.
56 */
t4_wait_op_done_val(struct adapter * adapter,int reg,u32 mask,int polarity,int attempts,int delay,u32 * valp)57 static int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask,
58 int polarity, int attempts, int delay, u32 *valp)
59 {
60 while (1) {
61 u32 val = t4_read_reg(adapter, reg);
62
63 if (!!(val & mask) == polarity) {
64 if (valp)
65 *valp = val;
66 return 0;
67 }
68 if (--attempts == 0)
69 return -EAGAIN;
70 if (delay)
71 udelay(delay);
72 }
73 }
74
t4_wait_op_done(struct adapter * adapter,int reg,u32 mask,int polarity,int attempts,int delay)75 static inline int t4_wait_op_done(struct adapter *adapter, int reg, u32 mask,
76 int polarity, int attempts, int delay)
77 {
78 return t4_wait_op_done_val(adapter, reg, mask, polarity, attempts,
79 delay, NULL);
80 }
81
82 /**
83 * t4_set_reg_field - set a register field to a value
84 * @adapter: the adapter to program
85 * @addr: the register address
86 * @mask: specifies the portion of the register to modify
87 * @val: the new value for the register field
88 *
89 * Sets a register field specified by the supplied mask to the
90 * given value.
91 */
t4_set_reg_field(struct adapter * adapter,unsigned int addr,u32 mask,u32 val)92 void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask,
93 u32 val)
94 {
95 u32 v = t4_read_reg(adapter, addr) & ~mask;
96
97 t4_write_reg(adapter, addr, v | val);
98 (void) t4_read_reg(adapter, addr); /* flush */
99 }
100
101 /**
102 * t4_read_indirect - read indirectly addressed registers
103 * @adap: the adapter
104 * @addr_reg: register holding the indirect address
105 * @data_reg: register holding the value of the indirect register
106 * @vals: where the read register values are stored
107 * @nregs: how many indirect registers to read
108 * @start_idx: index of first indirect register to read
109 *
110 * Reads registers that are accessed indirectly through an address/data
111 * register pair.
112 */
t4_read_indirect(struct adapter * adap,unsigned int addr_reg,unsigned int data_reg,u32 * vals,unsigned int nregs,unsigned int start_idx)113 void t4_read_indirect(struct adapter *adap, unsigned int addr_reg,
114 unsigned int data_reg, u32 *vals,
115 unsigned int nregs, unsigned int start_idx)
116 {
117 while (nregs--) {
118 t4_write_reg(adap, addr_reg, start_idx);
119 *vals++ = t4_read_reg(adap, data_reg);
120 start_idx++;
121 }
122 }
123
124 /**
125 * t4_write_indirect - write indirectly addressed registers
126 * @adap: the adapter
127 * @addr_reg: register holding the indirect addresses
128 * @data_reg: register holding the value for the indirect registers
129 * @vals: values to write
130 * @nregs: how many indirect registers to write
131 * @start_idx: address of first indirect register to write
132 *
133 * Writes a sequential block of registers that are accessed indirectly
134 * through an address/data register pair.
135 */
t4_write_indirect(struct adapter * adap,unsigned int addr_reg,unsigned int data_reg,const u32 * vals,unsigned int nregs,unsigned int start_idx)136 void t4_write_indirect(struct adapter *adap, unsigned int addr_reg,
137 unsigned int data_reg, const u32 *vals,
138 unsigned int nregs, unsigned int start_idx)
139 {
140 while (nregs--) {
141 t4_write_reg(adap, addr_reg, start_idx++);
142 t4_write_reg(adap, data_reg, *vals++);
143 }
144 }
145
146 /*
147 * Read a 32-bit PCI Configuration Space register via the PCI-E backdoor
148 * mechanism. This guarantees that we get the real value even if we're
149 * operating within a Virtual Machine and the Hypervisor is trapping our
150 * Configuration Space accesses.
151 */
t4_hw_pci_read_cfg4(struct adapter * adap,int reg,u32 * val)152 void t4_hw_pci_read_cfg4(struct adapter *adap, int reg, u32 *val)
153 {
154 u32 req = FUNCTION_V(adap->pf) | REGISTER_V(reg);
155
156 if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
157 req |= ENABLE_F;
158 else
159 req |= T6_ENABLE_F;
160
161 if (is_t4(adap->params.chip))
162 req |= LOCALCFG_F;
163
164 t4_write_reg(adap, PCIE_CFG_SPACE_REQ_A, req);
165 *val = t4_read_reg(adap, PCIE_CFG_SPACE_DATA_A);
166
167 /* Reset ENABLE to 0 so reads of PCIE_CFG_SPACE_DATA won't cause a
168 * Configuration Space read. (None of the other fields matter when
169 * ENABLE is 0 so a simple register write is easier than a
170 * read-modify-write via t4_set_reg_field().)
171 */
172 t4_write_reg(adap, PCIE_CFG_SPACE_REQ_A, 0);
173 }
174
175 /*
176 * t4_report_fw_error - report firmware error
177 * @adap: the adapter
178 *
179 * The adapter firmware can indicate error conditions to the host.
180 * If the firmware has indicated an error, print out the reason for
181 * the firmware error.
182 */
t4_report_fw_error(struct adapter * adap)183 static void t4_report_fw_error(struct adapter *adap)
184 {
185 static const char *const reason[] = {
186 "Crash", /* PCIE_FW_EVAL_CRASH */
187 "During Device Preparation", /* PCIE_FW_EVAL_PREP */
188 "During Device Configuration", /* PCIE_FW_EVAL_CONF */
189 "During Device Initialization", /* PCIE_FW_EVAL_INIT */
190 "Unexpected Event", /* PCIE_FW_EVAL_UNEXPECTEDEVENT */
191 "Insufficient Airflow", /* PCIE_FW_EVAL_OVERHEAT */
192 "Device Shutdown", /* PCIE_FW_EVAL_DEVICESHUTDOWN */
193 "Reserved", /* reserved */
194 };
195 u32 pcie_fw;
196
197 pcie_fw = t4_read_reg(adap, PCIE_FW_A);
198 if (pcie_fw & PCIE_FW_ERR_F) {
199 dev_err(adap->pdev_dev, "Firmware reports adapter error: %s\n",
200 reason[PCIE_FW_EVAL_G(pcie_fw)]);
201 adap->flags &= ~FW_OK;
202 }
203 }
204
205 /*
206 * Get the reply to a mailbox command and store it in @rpl in big-endian order.
207 */
get_mbox_rpl(struct adapter * adap,__be64 * rpl,int nflit,u32 mbox_addr)208 static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit,
209 u32 mbox_addr)
210 {
211 for ( ; nflit; nflit--, mbox_addr += 8)
212 *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr));
213 }
214
215 /*
216 * Handle a FW assertion reported in a mailbox.
217 */
fw_asrt(struct adapter * adap,u32 mbox_addr)218 static void fw_asrt(struct adapter *adap, u32 mbox_addr)
219 {
220 struct fw_debug_cmd asrt;
221
222 get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr);
223 dev_alert(adap->pdev_dev,
224 "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n",
225 asrt.u.assert.filename_0_7, be32_to_cpu(asrt.u.assert.line),
226 be32_to_cpu(asrt.u.assert.x), be32_to_cpu(asrt.u.assert.y));
227 }
228
229 /**
230 * t4_record_mbox - record a Firmware Mailbox Command/Reply in the log
231 * @adapter: the adapter
232 * @cmd: the Firmware Mailbox Command or Reply
233 * @size: command length in bytes
234 * @access: the time (ms) needed to access the Firmware Mailbox
235 * @execute: the time (ms) the command spent being executed
236 */
t4_record_mbox(struct adapter * adapter,const __be64 * cmd,unsigned int size,int access,int execute)237 static void t4_record_mbox(struct adapter *adapter,
238 const __be64 *cmd, unsigned int size,
239 int access, int execute)
240 {
241 struct mbox_cmd_log *log = adapter->mbox_log;
242 struct mbox_cmd *entry;
243 int i;
244
245 entry = mbox_cmd_log_entry(log, log->cursor++);
246 if (log->cursor == log->size)
247 log->cursor = 0;
248
249 for (i = 0; i < size / 8; i++)
250 entry->cmd[i] = be64_to_cpu(cmd[i]);
251 while (i < MBOX_LEN / 8)
252 entry->cmd[i++] = 0;
253 entry->timestamp = jiffies;
254 entry->seqno = log->seqno++;
255 entry->access = access;
256 entry->execute = execute;
257 }
258
259 /**
260 * t4_wr_mbox_meat_timeout - send a command to FW through the given mailbox
261 * @adap: the adapter
262 * @mbox: index of the mailbox to use
263 * @cmd: the command to write
264 * @size: command length in bytes
265 * @rpl: where to optionally store the reply
266 * @sleep_ok: if true we may sleep while awaiting command completion
267 * @timeout: time to wait for command to finish before timing out
268 *
269 * Sends the given command to FW through the selected mailbox and waits
270 * for the FW to execute the command. If @rpl is not %NULL it is used to
271 * store the FW's reply to the command. The command and its optional
272 * reply are of the same length. FW can take up to %FW_CMD_MAX_TIMEOUT ms
273 * to respond. @sleep_ok determines whether we may sleep while awaiting
274 * the response. If sleeping is allowed we use progressive backoff
275 * otherwise we spin.
276 *
277 * The return value is 0 on success or a negative errno on failure. A
278 * failure can happen either because we are not able to execute the
279 * command or FW executes it but signals an error. In the latter case
280 * the return value is the error code indicated by FW (negated).
281 */
t4_wr_mbox_meat_timeout(struct adapter * adap,int mbox,const void * cmd,int size,void * rpl,bool sleep_ok,int timeout)282 int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, const void *cmd,
283 int size, void *rpl, bool sleep_ok, int timeout)
284 {
285 static const int delay[] = {
286 1, 1, 3, 5, 10, 10, 20, 50, 100, 200
287 };
288
289 struct mbox_list entry;
290 u16 access = 0;
291 u16 execute = 0;
292 u32 v;
293 u64 res;
294 int i, ms, delay_idx, ret;
295 const __be64 *p = cmd;
296 u32 data_reg = PF_REG(mbox, CIM_PF_MAILBOX_DATA_A);
297 u32 ctl_reg = PF_REG(mbox, CIM_PF_MAILBOX_CTRL_A);
298 __be64 cmd_rpl[MBOX_LEN / 8];
299 u32 pcie_fw;
300
301 if ((size & 15) || size > MBOX_LEN)
302 return -EINVAL;
303
304 /*
305 * If the device is off-line, as in EEH, commands will time out.
306 * Fail them early so we don't waste time waiting.
307 */
308 if (adap->pdev->error_state != pci_channel_io_normal)
309 return -EIO;
310
311 /* If we have a negative timeout, that implies that we can't sleep. */
312 if (timeout < 0) {
313 sleep_ok = false;
314 timeout = -timeout;
315 }
316
317 /* Queue ourselves onto the mailbox access list. When our entry is at
318 * the front of the list, we have rights to access the mailbox. So we
319 * wait [for a while] till we're at the front [or bail out with an
320 * EBUSY] ...
321 */
322 spin_lock_bh(&adap->mbox_lock);
323 list_add_tail(&entry.list, &adap->mlist.list);
324 spin_unlock_bh(&adap->mbox_lock);
325
326 delay_idx = 0;
327 ms = delay[0];
328
329 for (i = 0; ; i += ms) {
330 /* If we've waited too long, return a busy indication. This
331 * really ought to be based on our initial position in the
332 * mailbox access list but this is a start. We very rearely
333 * contend on access to the mailbox ...
334 */
335 pcie_fw = t4_read_reg(adap, PCIE_FW_A);
336 if (i > FW_CMD_MAX_TIMEOUT || (pcie_fw & PCIE_FW_ERR_F)) {
337 spin_lock_bh(&adap->mbox_lock);
338 list_del(&entry.list);
339 spin_unlock_bh(&adap->mbox_lock);
340 ret = (pcie_fw & PCIE_FW_ERR_F) ? -ENXIO : -EBUSY;
341 t4_record_mbox(adap, cmd, size, access, ret);
342 return ret;
343 }
344
345 /* If we're at the head, break out and start the mailbox
346 * protocol.
347 */
348 if (list_first_entry(&adap->mlist.list, struct mbox_list,
349 list) == &entry)
350 break;
351
352 /* Delay for a bit before checking again ... */
353 if (sleep_ok) {
354 ms = delay[delay_idx]; /* last element may repeat */
355 if (delay_idx < ARRAY_SIZE(delay) - 1)
356 delay_idx++;
357 msleep(ms);
358 } else {
359 mdelay(ms);
360 }
361 }
362
363 /* Loop trying to get ownership of the mailbox. Return an error
364 * if we can't gain ownership.
365 */
366 v = MBOWNER_G(t4_read_reg(adap, ctl_reg));
367 for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++)
368 v = MBOWNER_G(t4_read_reg(adap, ctl_reg));
369 if (v != MBOX_OWNER_DRV) {
370 spin_lock_bh(&adap->mbox_lock);
371 list_del(&entry.list);
372 spin_unlock_bh(&adap->mbox_lock);
373 ret = (v == MBOX_OWNER_FW) ? -EBUSY : -ETIMEDOUT;
374 t4_record_mbox(adap, cmd, size, access, ret);
375 return ret;
376 }
377
378 /* Copy in the new mailbox command and send it on its way ... */
379 t4_record_mbox(adap, cmd, size, access, 0);
380 for (i = 0; i < size; i += 8)
381 t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p++));
382
383 t4_write_reg(adap, ctl_reg, MBMSGVALID_F | MBOWNER_V(MBOX_OWNER_FW));
384 t4_read_reg(adap, ctl_reg); /* flush write */
385
386 delay_idx = 0;
387 ms = delay[0];
388
389 for (i = 0;
390 !((pcie_fw = t4_read_reg(adap, PCIE_FW_A)) & PCIE_FW_ERR_F) &&
391 i < timeout;
392 i += ms) {
393 if (sleep_ok) {
394 ms = delay[delay_idx]; /* last element may repeat */
395 if (delay_idx < ARRAY_SIZE(delay) - 1)
396 delay_idx++;
397 msleep(ms);
398 } else
399 mdelay(ms);
400
401 v = t4_read_reg(adap, ctl_reg);
402 if (MBOWNER_G(v) == MBOX_OWNER_DRV) {
403 if (!(v & MBMSGVALID_F)) {
404 t4_write_reg(adap, ctl_reg, 0);
405 continue;
406 }
407
408 get_mbox_rpl(adap, cmd_rpl, MBOX_LEN / 8, data_reg);
409 res = be64_to_cpu(cmd_rpl[0]);
410
411 if (FW_CMD_OP_G(res >> 32) == FW_DEBUG_CMD) {
412 fw_asrt(adap, data_reg);
413 res = FW_CMD_RETVAL_V(EIO);
414 } else if (rpl) {
415 memcpy(rpl, cmd_rpl, size);
416 }
417
418 t4_write_reg(adap, ctl_reg, 0);
419
420 execute = i + ms;
421 t4_record_mbox(adap, cmd_rpl,
422 MBOX_LEN, access, execute);
423 spin_lock_bh(&adap->mbox_lock);
424 list_del(&entry.list);
425 spin_unlock_bh(&adap->mbox_lock);
426 return -FW_CMD_RETVAL_G((int)res);
427 }
428 }
429
430 ret = (pcie_fw & PCIE_FW_ERR_F) ? -ENXIO : -ETIMEDOUT;
431 t4_record_mbox(adap, cmd, size, access, ret);
432 dev_err(adap->pdev_dev, "command %#x in mailbox %d timed out\n",
433 *(const u8 *)cmd, mbox);
434 t4_report_fw_error(adap);
435 spin_lock_bh(&adap->mbox_lock);
436 list_del(&entry.list);
437 spin_unlock_bh(&adap->mbox_lock);
438 t4_fatal_err(adap);
439 return ret;
440 }
441
t4_wr_mbox_meat(struct adapter * adap,int mbox,const void * cmd,int size,void * rpl,bool sleep_ok)442 int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size,
443 void *rpl, bool sleep_ok)
444 {
445 return t4_wr_mbox_meat_timeout(adap, mbox, cmd, size, rpl, sleep_ok,
446 FW_CMD_MAX_TIMEOUT);
447 }
448
t4_edc_err_read(struct adapter * adap,int idx)449 static int t4_edc_err_read(struct adapter *adap, int idx)
450 {
451 u32 edc_ecc_err_addr_reg;
452 u32 rdata_reg;
453
454 if (is_t4(adap->params.chip)) {
455 CH_WARN(adap, "%s: T4 NOT supported.\n", __func__);
456 return 0;
457 }
458 if (idx != 0 && idx != 1) {
459 CH_WARN(adap, "%s: idx %d NOT supported.\n", __func__, idx);
460 return 0;
461 }
462
463 edc_ecc_err_addr_reg = EDC_T5_REG(EDC_H_ECC_ERR_ADDR_A, idx);
464 rdata_reg = EDC_T5_REG(EDC_H_BIST_STATUS_RDATA_A, idx);
465
466 CH_WARN(adap,
467 "edc%d err addr 0x%x: 0x%x.\n",
468 idx, edc_ecc_err_addr_reg,
469 t4_read_reg(adap, edc_ecc_err_addr_reg));
470 CH_WARN(adap,
471 "bist: 0x%x, status %llx %llx %llx %llx %llx %llx %llx %llx %llx.\n",
472 rdata_reg,
473 (unsigned long long)t4_read_reg64(adap, rdata_reg),
474 (unsigned long long)t4_read_reg64(adap, rdata_reg + 8),
475 (unsigned long long)t4_read_reg64(adap, rdata_reg + 16),
476 (unsigned long long)t4_read_reg64(adap, rdata_reg + 24),
477 (unsigned long long)t4_read_reg64(adap, rdata_reg + 32),
478 (unsigned long long)t4_read_reg64(adap, rdata_reg + 40),
479 (unsigned long long)t4_read_reg64(adap, rdata_reg + 48),
480 (unsigned long long)t4_read_reg64(adap, rdata_reg + 56),
481 (unsigned long long)t4_read_reg64(adap, rdata_reg + 64));
482
483 return 0;
484 }
485
486 /**
487 * t4_memory_rw_init - Get memory window relative offset, base, and size.
488 * @adap: the adapter
489 * @win: PCI-E Memory Window to use
490 * @mtype: memory type: MEM_EDC0, MEM_EDC1, MEM_HMA or MEM_MC
491 * @mem_off: memory relative offset with respect to @mtype.
492 * @mem_base: configured memory base address.
493 * @mem_aperture: configured memory window aperture.
494 *
495 * Get the configured memory window's relative offset, base, and size.
496 */
t4_memory_rw_init(struct adapter * adap,int win,int mtype,u32 * mem_off,u32 * mem_base,u32 * mem_aperture)497 int t4_memory_rw_init(struct adapter *adap, int win, int mtype, u32 *mem_off,
498 u32 *mem_base, u32 *mem_aperture)
499 {
500 u32 edc_size, mc_size, mem_reg;
501
502 /* Offset into the region of memory which is being accessed
503 * MEM_EDC0 = 0
504 * MEM_EDC1 = 1
505 * MEM_MC = 2 -- MEM_MC for chips with only 1 memory controller
506 * MEM_MC1 = 3 -- for chips with 2 memory controllers (e.g. T5)
507 * MEM_HMA = 4
508 */
509 edc_size = EDRAM0_SIZE_G(t4_read_reg(adap, MA_EDRAM0_BAR_A));
510 if (mtype == MEM_HMA) {
511 *mem_off = 2 * (edc_size * 1024 * 1024);
512 } else if (mtype != MEM_MC1) {
513 *mem_off = (mtype * (edc_size * 1024 * 1024));
514 } else {
515 mc_size = EXT_MEM0_SIZE_G(t4_read_reg(adap,
516 MA_EXT_MEMORY0_BAR_A));
517 *mem_off = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
518 }
519
520 /* Each PCI-E Memory Window is programmed with a window size -- or
521 * "aperture" -- which controls the granularity of its mapping onto
522 * adapter memory. We need to grab that aperture in order to know
523 * how to use the specified window. The window is also programmed
524 * with the base address of the Memory Window in BAR0's address
525 * space. For T4 this is an absolute PCI-E Bus Address. For T5
526 * the address is relative to BAR0.
527 */
528 mem_reg = t4_read_reg(adap,
529 PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A,
530 win));
531 /* a dead adapter will return 0xffffffff for PIO reads */
532 if (mem_reg == 0xffffffff)
533 return -ENXIO;
534
535 *mem_aperture = 1 << (WINDOW_G(mem_reg) + WINDOW_SHIFT_X);
536 *mem_base = PCIEOFST_G(mem_reg) << PCIEOFST_SHIFT_X;
537 if (is_t4(adap->params.chip))
538 *mem_base -= adap->t4_bar0;
539
540 return 0;
541 }
542
543 /**
544 * t4_memory_update_win - Move memory window to specified address.
545 * @adap: the adapter
546 * @win: PCI-E Memory Window to use
547 * @addr: location to move.
548 *
549 * Move memory window to specified address.
550 */
t4_memory_update_win(struct adapter * adap,int win,u32 addr)551 void t4_memory_update_win(struct adapter *adap, int win, u32 addr)
552 {
553 t4_write_reg(adap,
554 PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win),
555 addr);
556 /* Read it back to ensure that changes propagate before we
557 * attempt to use the new value.
558 */
559 t4_read_reg(adap,
560 PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win));
561 }
562
563 /**
564 * t4_memory_rw_residual - Read/Write residual data.
565 * @adap: the adapter
566 * @off: relative offset within residual to start read/write.
567 * @addr: address within indicated memory type.
568 * @buf: host memory buffer
569 * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
570 *
571 * Read/Write residual data less than 32-bits.
572 */
t4_memory_rw_residual(struct adapter * adap,u32 off,u32 addr,u8 * buf,int dir)573 void t4_memory_rw_residual(struct adapter *adap, u32 off, u32 addr, u8 *buf,
574 int dir)
575 {
576 union {
577 u32 word;
578 char byte[4];
579 } last;
580 unsigned char *bp;
581 int i;
582
583 if (dir == T4_MEMORY_READ) {
584 last.word = le32_to_cpu((__force __le32)
585 t4_read_reg(adap, addr));
586 for (bp = (unsigned char *)buf, i = off; i < 4; i++)
587 bp[i] = last.byte[i];
588 } else {
589 last.word = *buf;
590 for (i = off; i < 4; i++)
591 last.byte[i] = 0;
592 t4_write_reg(adap, addr,
593 (__force u32)cpu_to_le32(last.word));
594 }
595 }
596
597 /**
598 * t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
599 * @adap: the adapter
600 * @win: PCI-E Memory Window to use
601 * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
602 * @addr: address within indicated memory type
603 * @len: amount of memory to transfer
604 * @hbuf: host memory buffer
605 * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
606 *
607 * Reads/writes an [almost] arbitrary memory region in the firmware: the
608 * firmware memory address and host buffer must be aligned on 32-bit
609 * boudaries; the length may be arbitrary. The memory is transferred as
610 * a raw byte sequence from/to the firmware's memory. If this memory
611 * contains data structures which contain multi-byte integers, it's the
612 * caller's responsibility to perform appropriate byte order conversions.
613 */
t4_memory_rw(struct adapter * adap,int win,int mtype,u32 addr,u32 len,void * hbuf,int dir)614 int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr,
615 u32 len, void *hbuf, int dir)
616 {
617 u32 pos, offset, resid, memoffset;
618 u32 win_pf, mem_aperture, mem_base;
619 u32 *buf;
620 int ret;
621
622 /* Argument sanity checks ...
623 */
624 if (addr & 0x3 || (uintptr_t)hbuf & 0x3)
625 return -EINVAL;
626 buf = (u32 *)hbuf;
627
628 /* It's convenient to be able to handle lengths which aren't a
629 * multiple of 32-bits because we often end up transferring files to
630 * the firmware. So we'll handle that by normalizing the length here
631 * and then handling any residual transfer at the end.
632 */
633 resid = len & 0x3;
634 len -= resid;
635
636 ret = t4_memory_rw_init(adap, win, mtype, &memoffset, &mem_base,
637 &mem_aperture);
638 if (ret)
639 return ret;
640
641 /* Determine the PCIE_MEM_ACCESS_OFFSET */
642 addr = addr + memoffset;
643
644 win_pf = is_t4(adap->params.chip) ? 0 : PFNUM_V(adap->pf);
645
646 /* Calculate our initial PCI-E Memory Window Position and Offset into
647 * that Window.
648 */
649 pos = addr & ~(mem_aperture - 1);
650 offset = addr - pos;
651
652 /* Set up initial PCI-E Memory Window to cover the start of our
653 * transfer.
654 */
655 t4_memory_update_win(adap, win, pos | win_pf);
656
657 /* Transfer data to/from the adapter as long as there's an integral
658 * number of 32-bit transfers to complete.
659 *
660 * A note on Endianness issues:
661 *
662 * The "register" reads and writes below from/to the PCI-E Memory
663 * Window invoke the standard adapter Big-Endian to PCI-E Link
664 * Little-Endian "swizzel." As a result, if we have the following
665 * data in adapter memory:
666 *
667 * Memory: ... | b0 | b1 | b2 | b3 | ...
668 * Address: i+0 i+1 i+2 i+3
669 *
670 * Then a read of the adapter memory via the PCI-E Memory Window
671 * will yield:
672 *
673 * x = readl(i)
674 * 31 0
675 * [ b3 | b2 | b1 | b0 ]
676 *
677 * If this value is stored into local memory on a Little-Endian system
678 * it will show up correctly in local memory as:
679 *
680 * ( ..., b0, b1, b2, b3, ... )
681 *
682 * But on a Big-Endian system, the store will show up in memory
683 * incorrectly swizzled as:
684 *
685 * ( ..., b3, b2, b1, b0, ... )
686 *
687 * So we need to account for this in the reads and writes to the
688 * PCI-E Memory Window below by undoing the register read/write
689 * swizzels.
690 */
691 while (len > 0) {
692 if (dir == T4_MEMORY_READ)
693 *buf++ = le32_to_cpu((__force __le32)t4_read_reg(adap,
694 mem_base + offset));
695 else
696 t4_write_reg(adap, mem_base + offset,
697 (__force u32)cpu_to_le32(*buf++));
698 offset += sizeof(__be32);
699 len -= sizeof(__be32);
700
701 /* If we've reached the end of our current window aperture,
702 * move the PCI-E Memory Window on to the next. Note that
703 * doing this here after "len" may be 0 allows us to set up
704 * the PCI-E Memory Window for a possible final residual
705 * transfer below ...
706 */
707 if (offset == mem_aperture) {
708 pos += mem_aperture;
709 offset = 0;
710 t4_memory_update_win(adap, win, pos | win_pf);
711 }
712 }
713
714 /* If the original transfer had a length which wasn't a multiple of
715 * 32-bits, now's where we need to finish off the transfer of the
716 * residual amount. The PCI-E Memory Window has already been moved
717 * above (if necessary) to cover this final transfer.
718 */
719 if (resid)
720 t4_memory_rw_residual(adap, resid, mem_base + offset,
721 (u8 *)buf, dir);
722
723 return 0;
724 }
725
726 /* Return the specified PCI-E Configuration Space register from our Physical
727 * Function. We try first via a Firmware LDST Command since we prefer to let
728 * the firmware own all of these registers, but if that fails we go for it
729 * directly ourselves.
730 */
t4_read_pcie_cfg4(struct adapter * adap,int reg)731 u32 t4_read_pcie_cfg4(struct adapter *adap, int reg)
732 {
733 u32 val, ldst_addrspace;
734
735 /* If fw_attach != 0, construct and send the Firmware LDST Command to
736 * retrieve the specified PCI-E Configuration Space register.
737 */
738 struct fw_ldst_cmd ldst_cmd;
739 int ret;
740
741 memset(&ldst_cmd, 0, sizeof(ldst_cmd));
742 ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FUNC_PCIE);
743 ldst_cmd.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
744 FW_CMD_REQUEST_F |
745 FW_CMD_READ_F |
746 ldst_addrspace);
747 ldst_cmd.cycles_to_len16 = cpu_to_be32(FW_LEN16(ldst_cmd));
748 ldst_cmd.u.pcie.select_naccess = FW_LDST_CMD_NACCESS_V(1);
749 ldst_cmd.u.pcie.ctrl_to_fn =
750 (FW_LDST_CMD_LC_F | FW_LDST_CMD_FN_V(adap->pf));
751 ldst_cmd.u.pcie.r = reg;
752
753 /* If the LDST Command succeeds, return the result, otherwise
754 * fall through to reading it directly ourselves ...
755 */
756 ret = t4_wr_mbox(adap, adap->mbox, &ldst_cmd, sizeof(ldst_cmd),
757 &ldst_cmd);
758 if (ret == 0)
759 val = be32_to_cpu(ldst_cmd.u.pcie.data[0]);
760 else
761 /* Read the desired Configuration Space register via the PCI-E
762 * Backdoor mechanism.
763 */
764 t4_hw_pci_read_cfg4(adap, reg, &val);
765 return val;
766 }
767
768 /* Get the window based on base passed to it.
769 * Window aperture is currently unhandled, but there is no use case for it
770 * right now
771 */
t4_get_window(struct adapter * adap,u32 pci_base,u64 pci_mask,u32 memwin_base)772 static u32 t4_get_window(struct adapter *adap, u32 pci_base, u64 pci_mask,
773 u32 memwin_base)
774 {
775 u32 ret;
776
777 if (is_t4(adap->params.chip)) {
778 u32 bar0;
779
780 /* Truncation intentional: we only read the bottom 32-bits of
781 * the 64-bit BAR0/BAR1 ... We use the hardware backdoor
782 * mechanism to read BAR0 instead of using
783 * pci_resource_start() because we could be operating from
784 * within a Virtual Machine which is trapping our accesses to
785 * our Configuration Space and we need to set up the PCI-E
786 * Memory Window decoders with the actual addresses which will
787 * be coming across the PCI-E link.
788 */
789 bar0 = t4_read_pcie_cfg4(adap, pci_base);
790 bar0 &= pci_mask;
791 adap->t4_bar0 = bar0;
792
793 ret = bar0 + memwin_base;
794 } else {
795 /* For T5, only relative offset inside the PCIe BAR is passed */
796 ret = memwin_base;
797 }
798 return ret;
799 }
800
801 /* Get the default utility window (win0) used by everyone */
t4_get_util_window(struct adapter * adap)802 u32 t4_get_util_window(struct adapter *adap)
803 {
804 return t4_get_window(adap, PCI_BASE_ADDRESS_0,
805 PCI_BASE_ADDRESS_MEM_MASK, MEMWIN0_BASE);
806 }
807
808 /* Set up memory window for accessing adapter memory ranges. (Read
809 * back MA register to ensure that changes propagate before we attempt
810 * to use the new values.)
811 */
t4_setup_memwin(struct adapter * adap,u32 memwin_base,u32 window)812 void t4_setup_memwin(struct adapter *adap, u32 memwin_base, u32 window)
813 {
814 t4_write_reg(adap,
815 PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, window),
816 memwin_base | BIR_V(0) |
817 WINDOW_V(ilog2(MEMWIN0_APERTURE) - WINDOW_SHIFT_X));
818 t4_read_reg(adap,
819 PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, window));
820 }
821
822 /**
823 * t4_get_regs_len - return the size of the chips register set
824 * @adapter: the adapter
825 *
826 * Returns the size of the chip's BAR0 register space.
827 */
t4_get_regs_len(struct adapter * adapter)828 unsigned int t4_get_regs_len(struct adapter *adapter)
829 {
830 unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
831
832 switch (chip_version) {
833 case CHELSIO_T4:
834 return T4_REGMAP_SIZE;
835
836 case CHELSIO_T5:
837 case CHELSIO_T6:
838 return T5_REGMAP_SIZE;
839 }
840
841 dev_err(adapter->pdev_dev,
842 "Unsupported chip version %d\n", chip_version);
843 return 0;
844 }
845
846 /**
847 * t4_get_regs - read chip registers into provided buffer
848 * @adap: the adapter
849 * @buf: register buffer
850 * @buf_size: size (in bytes) of register buffer
851 *
852 * If the provided register buffer isn't large enough for the chip's
853 * full register range, the register dump will be truncated to the
854 * register buffer's size.
855 */
t4_get_regs(struct adapter * adap,void * buf,size_t buf_size)856 void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
857 {
858 static const unsigned int t4_reg_ranges[] = {
859 0x1008, 0x1108,
860 0x1180, 0x1184,
861 0x1190, 0x1194,
862 0x11a0, 0x11a4,
863 0x11b0, 0x11b4,
864 0x11fc, 0x123c,
865 0x1300, 0x173c,
866 0x1800, 0x18fc,
867 0x3000, 0x30d8,
868 0x30e0, 0x30e4,
869 0x30ec, 0x5910,
870 0x5920, 0x5924,
871 0x5960, 0x5960,
872 0x5968, 0x5968,
873 0x5970, 0x5970,
874 0x5978, 0x5978,
875 0x5980, 0x5980,
876 0x5988, 0x5988,
877 0x5990, 0x5990,
878 0x5998, 0x5998,
879 0x59a0, 0x59d4,
880 0x5a00, 0x5ae0,
881 0x5ae8, 0x5ae8,
882 0x5af0, 0x5af0,
883 0x5af8, 0x5af8,
884 0x6000, 0x6098,
885 0x6100, 0x6150,
886 0x6200, 0x6208,
887 0x6240, 0x6248,
888 0x6280, 0x62b0,
889 0x62c0, 0x6338,
890 0x6370, 0x638c,
891 0x6400, 0x643c,
892 0x6500, 0x6524,
893 0x6a00, 0x6a04,
894 0x6a14, 0x6a38,
895 0x6a60, 0x6a70,
896 0x6a78, 0x6a78,
897 0x6b00, 0x6b0c,
898 0x6b1c, 0x6b84,
899 0x6bf0, 0x6bf8,
900 0x6c00, 0x6c0c,
901 0x6c1c, 0x6c84,
902 0x6cf0, 0x6cf8,
903 0x6d00, 0x6d0c,
904 0x6d1c, 0x6d84,
905 0x6df0, 0x6df8,
906 0x6e00, 0x6e0c,
907 0x6e1c, 0x6e84,
908 0x6ef0, 0x6ef8,
909 0x6f00, 0x6f0c,
910 0x6f1c, 0x6f84,
911 0x6ff0, 0x6ff8,
912 0x7000, 0x700c,
913 0x701c, 0x7084,
914 0x70f0, 0x70f8,
915 0x7100, 0x710c,
916 0x711c, 0x7184,
917 0x71f0, 0x71f8,
918 0x7200, 0x720c,
919 0x721c, 0x7284,
920 0x72f0, 0x72f8,
921 0x7300, 0x730c,
922 0x731c, 0x7384,
923 0x73f0, 0x73f8,
924 0x7400, 0x7450,
925 0x7500, 0x7530,
926 0x7600, 0x760c,
927 0x7614, 0x761c,
928 0x7680, 0x76cc,
929 0x7700, 0x7798,
930 0x77c0, 0x77fc,
931 0x7900, 0x79fc,
932 0x7b00, 0x7b58,
933 0x7b60, 0x7b84,
934 0x7b8c, 0x7c38,
935 0x7d00, 0x7d38,
936 0x7d40, 0x7d80,
937 0x7d8c, 0x7ddc,
938 0x7de4, 0x7e04,
939 0x7e10, 0x7e1c,
940 0x7e24, 0x7e38,
941 0x7e40, 0x7e44,
942 0x7e4c, 0x7e78,
943 0x7e80, 0x7ea4,
944 0x7eac, 0x7edc,
945 0x7ee8, 0x7efc,
946 0x8dc0, 0x8e04,
947 0x8e10, 0x8e1c,
948 0x8e30, 0x8e78,
949 0x8ea0, 0x8eb8,
950 0x8ec0, 0x8f6c,
951 0x8fc0, 0x9008,
952 0x9010, 0x9058,
953 0x9060, 0x9060,
954 0x9068, 0x9074,
955 0x90fc, 0x90fc,
956 0x9400, 0x9408,
957 0x9410, 0x9458,
958 0x9600, 0x9600,
959 0x9608, 0x9638,
960 0x9640, 0x96bc,
961 0x9800, 0x9808,
962 0x9820, 0x983c,
963 0x9850, 0x9864,
964 0x9c00, 0x9c6c,
965 0x9c80, 0x9cec,
966 0x9d00, 0x9d6c,
967 0x9d80, 0x9dec,
968 0x9e00, 0x9e6c,
969 0x9e80, 0x9eec,
970 0x9f00, 0x9f6c,
971 0x9f80, 0x9fec,
972 0xd004, 0xd004,
973 0xd010, 0xd03c,
974 0xdfc0, 0xdfe0,
975 0xe000, 0xea7c,
976 0xf000, 0x11110,
977 0x11118, 0x11190,
978 0x19040, 0x1906c,
979 0x19078, 0x19080,
980 0x1908c, 0x190e4,
981 0x190f0, 0x190f8,
982 0x19100, 0x19110,
983 0x19120, 0x19124,
984 0x19150, 0x19194,
985 0x1919c, 0x191b0,
986 0x191d0, 0x191e8,
987 0x19238, 0x1924c,
988 0x193f8, 0x1943c,
989 0x1944c, 0x19474,
990 0x19490, 0x194e0,
991 0x194f0, 0x194f8,
992 0x19800, 0x19c08,
993 0x19c10, 0x19c90,
994 0x19ca0, 0x19ce4,
995 0x19cf0, 0x19d40,
996 0x19d50, 0x19d94,
997 0x19da0, 0x19de8,
998 0x19df0, 0x19e40,
999 0x19e50, 0x19e90,
1000 0x19ea0, 0x19f4c,
1001 0x1a000, 0x1a004,
1002 0x1a010, 0x1a06c,
1003 0x1a0b0, 0x1a0e4,
1004 0x1a0ec, 0x1a0f4,
1005 0x1a100, 0x1a108,
1006 0x1a114, 0x1a120,
1007 0x1a128, 0x1a130,
1008 0x1a138, 0x1a138,
1009 0x1a190, 0x1a1c4,
1010 0x1a1fc, 0x1a1fc,
1011 0x1e040, 0x1e04c,
1012 0x1e284, 0x1e28c,
1013 0x1e2c0, 0x1e2c0,
1014 0x1e2e0, 0x1e2e0,
1015 0x1e300, 0x1e384,
1016 0x1e3c0, 0x1e3c8,
1017 0x1e440, 0x1e44c,
1018 0x1e684, 0x1e68c,
1019 0x1e6c0, 0x1e6c0,
1020 0x1e6e0, 0x1e6e0,
1021 0x1e700, 0x1e784,
1022 0x1e7c0, 0x1e7c8,
1023 0x1e840, 0x1e84c,
1024 0x1ea84, 0x1ea8c,
1025 0x1eac0, 0x1eac0,
1026 0x1eae0, 0x1eae0,
1027 0x1eb00, 0x1eb84,
1028 0x1ebc0, 0x1ebc8,
1029 0x1ec40, 0x1ec4c,
1030 0x1ee84, 0x1ee8c,
1031 0x1eec0, 0x1eec0,
1032 0x1eee0, 0x1eee0,
1033 0x1ef00, 0x1ef84,
1034 0x1efc0, 0x1efc8,
1035 0x1f040, 0x1f04c,
1036 0x1f284, 0x1f28c,
1037 0x1f2c0, 0x1f2c0,
1038 0x1f2e0, 0x1f2e0,
1039 0x1f300, 0x1f384,
1040 0x1f3c0, 0x1f3c8,
1041 0x1f440, 0x1f44c,
1042 0x1f684, 0x1f68c,
1043 0x1f6c0, 0x1f6c0,
1044 0x1f6e0, 0x1f6e0,
1045 0x1f700, 0x1f784,
1046 0x1f7c0, 0x1f7c8,
1047 0x1f840, 0x1f84c,
1048 0x1fa84, 0x1fa8c,
1049 0x1fac0, 0x1fac0,
1050 0x1fae0, 0x1fae0,
1051 0x1fb00, 0x1fb84,
1052 0x1fbc0, 0x1fbc8,
1053 0x1fc40, 0x1fc4c,
1054 0x1fe84, 0x1fe8c,
1055 0x1fec0, 0x1fec0,
1056 0x1fee0, 0x1fee0,
1057 0x1ff00, 0x1ff84,
1058 0x1ffc0, 0x1ffc8,
1059 0x20000, 0x2002c,
1060 0x20100, 0x2013c,
1061 0x20190, 0x201a0,
1062 0x201a8, 0x201b8,
1063 0x201c4, 0x201c8,
1064 0x20200, 0x20318,
1065 0x20400, 0x204b4,
1066 0x204c0, 0x20528,
1067 0x20540, 0x20614,
1068 0x21000, 0x21040,
1069 0x2104c, 0x21060,
1070 0x210c0, 0x210ec,
1071 0x21200, 0x21268,
1072 0x21270, 0x21284,
1073 0x212fc, 0x21388,
1074 0x21400, 0x21404,
1075 0x21500, 0x21500,
1076 0x21510, 0x21518,
1077 0x2152c, 0x21530,
1078 0x2153c, 0x2153c,
1079 0x21550, 0x21554,
1080 0x21600, 0x21600,
1081 0x21608, 0x2161c,
1082 0x21624, 0x21628,
1083 0x21630, 0x21634,
1084 0x2163c, 0x2163c,
1085 0x21700, 0x2171c,
1086 0x21780, 0x2178c,
1087 0x21800, 0x21818,
1088 0x21820, 0x21828,
1089 0x21830, 0x21848,
1090 0x21850, 0x21854,
1091 0x21860, 0x21868,
1092 0x21870, 0x21870,
1093 0x21878, 0x21898,
1094 0x218a0, 0x218a8,
1095 0x218b0, 0x218c8,
1096 0x218d0, 0x218d4,
1097 0x218e0, 0x218e8,
1098 0x218f0, 0x218f0,
1099 0x218f8, 0x21a18,
1100 0x21a20, 0x21a28,
1101 0x21a30, 0x21a48,
1102 0x21a50, 0x21a54,
1103 0x21a60, 0x21a68,
1104 0x21a70, 0x21a70,
1105 0x21a78, 0x21a98,
1106 0x21aa0, 0x21aa8,
1107 0x21ab0, 0x21ac8,
1108 0x21ad0, 0x21ad4,
1109 0x21ae0, 0x21ae8,
1110 0x21af0, 0x21af0,
1111 0x21af8, 0x21c18,
1112 0x21c20, 0x21c20,
1113 0x21c28, 0x21c30,
1114 0x21c38, 0x21c38,
1115 0x21c80, 0x21c98,
1116 0x21ca0, 0x21ca8,
1117 0x21cb0, 0x21cc8,
1118 0x21cd0, 0x21cd4,
1119 0x21ce0, 0x21ce8,
1120 0x21cf0, 0x21cf0,
1121 0x21cf8, 0x21d7c,
1122 0x21e00, 0x21e04,
1123 0x22000, 0x2202c,
1124 0x22100, 0x2213c,
1125 0x22190, 0x221a0,
1126 0x221a8, 0x221b8,
1127 0x221c4, 0x221c8,
1128 0x22200, 0x22318,
1129 0x22400, 0x224b4,
1130 0x224c0, 0x22528,
1131 0x22540, 0x22614,
1132 0x23000, 0x23040,
1133 0x2304c, 0x23060,
1134 0x230c0, 0x230ec,
1135 0x23200, 0x23268,
1136 0x23270, 0x23284,
1137 0x232fc, 0x23388,
1138 0x23400, 0x23404,
1139 0x23500, 0x23500,
1140 0x23510, 0x23518,
1141 0x2352c, 0x23530,
1142 0x2353c, 0x2353c,
1143 0x23550, 0x23554,
1144 0x23600, 0x23600,
1145 0x23608, 0x2361c,
1146 0x23624, 0x23628,
1147 0x23630, 0x23634,
1148 0x2363c, 0x2363c,
1149 0x23700, 0x2371c,
1150 0x23780, 0x2378c,
1151 0x23800, 0x23818,
1152 0x23820, 0x23828,
1153 0x23830, 0x23848,
1154 0x23850, 0x23854,
1155 0x23860, 0x23868,
1156 0x23870, 0x23870,
1157 0x23878, 0x23898,
1158 0x238a0, 0x238a8,
1159 0x238b0, 0x238c8,
1160 0x238d0, 0x238d4,
1161 0x238e0, 0x238e8,
1162 0x238f0, 0x238f0,
1163 0x238f8, 0x23a18,
1164 0x23a20, 0x23a28,
1165 0x23a30, 0x23a48,
1166 0x23a50, 0x23a54,
1167 0x23a60, 0x23a68,
1168 0x23a70, 0x23a70,
1169 0x23a78, 0x23a98,
1170 0x23aa0, 0x23aa8,
1171 0x23ab0, 0x23ac8,
1172 0x23ad0, 0x23ad4,
1173 0x23ae0, 0x23ae8,
1174 0x23af0, 0x23af0,
1175 0x23af8, 0x23c18,
1176 0x23c20, 0x23c20,
1177 0x23c28, 0x23c30,
1178 0x23c38, 0x23c38,
1179 0x23c80, 0x23c98,
1180 0x23ca0, 0x23ca8,
1181 0x23cb0, 0x23cc8,
1182 0x23cd0, 0x23cd4,
1183 0x23ce0, 0x23ce8,
1184 0x23cf0, 0x23cf0,
1185 0x23cf8, 0x23d7c,
1186 0x23e00, 0x23e04,
1187 0x24000, 0x2402c,
1188 0x24100, 0x2413c,
1189 0x24190, 0x241a0,
1190 0x241a8, 0x241b8,
1191 0x241c4, 0x241c8,
1192 0x24200, 0x24318,
1193 0x24400, 0x244b4,
1194 0x244c0, 0x24528,
1195 0x24540, 0x24614,
1196 0x25000, 0x25040,
1197 0x2504c, 0x25060,
1198 0x250c0, 0x250ec,
1199 0x25200, 0x25268,
1200 0x25270, 0x25284,
1201 0x252fc, 0x25388,
1202 0x25400, 0x25404,
1203 0x25500, 0x25500,
1204 0x25510, 0x25518,
1205 0x2552c, 0x25530,
1206 0x2553c, 0x2553c,
1207 0x25550, 0x25554,
1208 0x25600, 0x25600,
1209 0x25608, 0x2561c,
1210 0x25624, 0x25628,
1211 0x25630, 0x25634,
1212 0x2563c, 0x2563c,
1213 0x25700, 0x2571c,
1214 0x25780, 0x2578c,
1215 0x25800, 0x25818,
1216 0x25820, 0x25828,
1217 0x25830, 0x25848,
1218 0x25850, 0x25854,
1219 0x25860, 0x25868,
1220 0x25870, 0x25870,
1221 0x25878, 0x25898,
1222 0x258a0, 0x258a8,
1223 0x258b0, 0x258c8,
1224 0x258d0, 0x258d4,
1225 0x258e0, 0x258e8,
1226 0x258f0, 0x258f0,
1227 0x258f8, 0x25a18,
1228 0x25a20, 0x25a28,
1229 0x25a30, 0x25a48,
1230 0x25a50, 0x25a54,
1231 0x25a60, 0x25a68,
1232 0x25a70, 0x25a70,
1233 0x25a78, 0x25a98,
1234 0x25aa0, 0x25aa8,
1235 0x25ab0, 0x25ac8,
1236 0x25ad0, 0x25ad4,
1237 0x25ae0, 0x25ae8,
1238 0x25af0, 0x25af0,
1239 0x25af8, 0x25c18,
1240 0x25c20, 0x25c20,
1241 0x25c28, 0x25c30,
1242 0x25c38, 0x25c38,
1243 0x25c80, 0x25c98,
1244 0x25ca0, 0x25ca8,
1245 0x25cb0, 0x25cc8,
1246 0x25cd0, 0x25cd4,
1247 0x25ce0, 0x25ce8,
1248 0x25cf0, 0x25cf0,
1249 0x25cf8, 0x25d7c,
1250 0x25e00, 0x25e04,
1251 0x26000, 0x2602c,
1252 0x26100, 0x2613c,
1253 0x26190, 0x261a0,
1254 0x261a8, 0x261b8,
1255 0x261c4, 0x261c8,
1256 0x26200, 0x26318,
1257 0x26400, 0x264b4,
1258 0x264c0, 0x26528,
1259 0x26540, 0x26614,
1260 0x27000, 0x27040,
1261 0x2704c, 0x27060,
1262 0x270c0, 0x270ec,
1263 0x27200, 0x27268,
1264 0x27270, 0x27284,
1265 0x272fc, 0x27388,
1266 0x27400, 0x27404,
1267 0x27500, 0x27500,
1268 0x27510, 0x27518,
1269 0x2752c, 0x27530,
1270 0x2753c, 0x2753c,
1271 0x27550, 0x27554,
1272 0x27600, 0x27600,
1273 0x27608, 0x2761c,
1274 0x27624, 0x27628,
1275 0x27630, 0x27634,
1276 0x2763c, 0x2763c,
1277 0x27700, 0x2771c,
1278 0x27780, 0x2778c,
1279 0x27800, 0x27818,
1280 0x27820, 0x27828,
1281 0x27830, 0x27848,
1282 0x27850, 0x27854,
1283 0x27860, 0x27868,
1284 0x27870, 0x27870,
1285 0x27878, 0x27898,
1286 0x278a0, 0x278a8,
1287 0x278b0, 0x278c8,
1288 0x278d0, 0x278d4,
1289 0x278e0, 0x278e8,
1290 0x278f0, 0x278f0,
1291 0x278f8, 0x27a18,
1292 0x27a20, 0x27a28,
1293 0x27a30, 0x27a48,
1294 0x27a50, 0x27a54,
1295 0x27a60, 0x27a68,
1296 0x27a70, 0x27a70,
1297 0x27a78, 0x27a98,
1298 0x27aa0, 0x27aa8,
1299 0x27ab0, 0x27ac8,
1300 0x27ad0, 0x27ad4,
1301 0x27ae0, 0x27ae8,
1302 0x27af0, 0x27af0,
1303 0x27af8, 0x27c18,
1304 0x27c20, 0x27c20,
1305 0x27c28, 0x27c30,
1306 0x27c38, 0x27c38,
1307 0x27c80, 0x27c98,
1308 0x27ca0, 0x27ca8,
1309 0x27cb0, 0x27cc8,
1310 0x27cd0, 0x27cd4,
1311 0x27ce0, 0x27ce8,
1312 0x27cf0, 0x27cf0,
1313 0x27cf8, 0x27d7c,
1314 0x27e00, 0x27e04,
1315 };
1316
1317 static const unsigned int t5_reg_ranges[] = {
1318 0x1008, 0x10c0,
1319 0x10cc, 0x10f8,
1320 0x1100, 0x1100,
1321 0x110c, 0x1148,
1322 0x1180, 0x1184,
1323 0x1190, 0x1194,
1324 0x11a0, 0x11a4,
1325 0x11b0, 0x11b4,
1326 0x11fc, 0x123c,
1327 0x1280, 0x173c,
1328 0x1800, 0x18fc,
1329 0x3000, 0x3028,
1330 0x3060, 0x30b0,
1331 0x30b8, 0x30d8,
1332 0x30e0, 0x30fc,
1333 0x3140, 0x357c,
1334 0x35a8, 0x35cc,
1335 0x35ec, 0x35ec,
1336 0x3600, 0x5624,
1337 0x56cc, 0x56ec,
1338 0x56f4, 0x5720,
1339 0x5728, 0x575c,
1340 0x580c, 0x5814,
1341 0x5890, 0x589c,
1342 0x58a4, 0x58ac,
1343 0x58b8, 0x58bc,
1344 0x5940, 0x59c8,
1345 0x59d0, 0x59dc,
1346 0x59fc, 0x5a18,
1347 0x5a60, 0x5a70,
1348 0x5a80, 0x5a9c,
1349 0x5b94, 0x5bfc,
1350 0x6000, 0x6020,
1351 0x6028, 0x6040,
1352 0x6058, 0x609c,
1353 0x60a8, 0x614c,
1354 0x7700, 0x7798,
1355 0x77c0, 0x78fc,
1356 0x7b00, 0x7b58,
1357 0x7b60, 0x7b84,
1358 0x7b8c, 0x7c54,
1359 0x7d00, 0x7d38,
1360 0x7d40, 0x7d80,
1361 0x7d8c, 0x7ddc,
1362 0x7de4, 0x7e04,
1363 0x7e10, 0x7e1c,
1364 0x7e24, 0x7e38,
1365 0x7e40, 0x7e44,
1366 0x7e4c, 0x7e78,
1367 0x7e80, 0x7edc,
1368 0x7ee8, 0x7efc,
1369 0x8dc0, 0x8de0,
1370 0x8df8, 0x8e04,
1371 0x8e10, 0x8e84,
1372 0x8ea0, 0x8f84,
1373 0x8fc0, 0x9058,
1374 0x9060, 0x9060,
1375 0x9068, 0x90f8,
1376 0x9400, 0x9408,
1377 0x9410, 0x9470,
1378 0x9600, 0x9600,
1379 0x9608, 0x9638,
1380 0x9640, 0x96f4,
1381 0x9800, 0x9808,
1382 0x9820, 0x983c,
1383 0x9850, 0x9864,
1384 0x9c00, 0x9c6c,
1385 0x9c80, 0x9cec,
1386 0x9d00, 0x9d6c,
1387 0x9d80, 0x9dec,
1388 0x9e00, 0x9e6c,
1389 0x9e80, 0x9eec,
1390 0x9f00, 0x9f6c,
1391 0x9f80, 0xa020,
1392 0xd004, 0xd004,
1393 0xd010, 0xd03c,
1394 0xdfc0, 0xdfe0,
1395 0xe000, 0x1106c,
1396 0x11074, 0x11088,
1397 0x1109c, 0x1117c,
1398 0x11190, 0x11204,
1399 0x19040, 0x1906c,
1400 0x19078, 0x19080,
1401 0x1908c, 0x190e8,
1402 0x190f0, 0x190f8,
1403 0x19100, 0x19110,
1404 0x19120, 0x19124,
1405 0x19150, 0x19194,
1406 0x1919c, 0x191b0,
1407 0x191d0, 0x191e8,
1408 0x19238, 0x19290,
1409 0x193f8, 0x19428,
1410 0x19430, 0x19444,
1411 0x1944c, 0x1946c,
1412 0x19474, 0x19474,
1413 0x19490, 0x194cc,
1414 0x194f0, 0x194f8,
1415 0x19c00, 0x19c08,
1416 0x19c10, 0x19c60,
1417 0x19c94, 0x19ce4,
1418 0x19cf0, 0x19d40,
1419 0x19d50, 0x19d94,
1420 0x19da0, 0x19de8,
1421 0x19df0, 0x19e10,
1422 0x19e50, 0x19e90,
1423 0x19ea0, 0x19f24,
1424 0x19f34, 0x19f34,
1425 0x19f40, 0x19f50,
1426 0x19f90, 0x19fb4,
1427 0x19fc4, 0x19fe4,
1428 0x1a000, 0x1a004,
1429 0x1a010, 0x1a06c,
1430 0x1a0b0, 0x1a0e4,
1431 0x1a0ec, 0x1a0f8,
1432 0x1a100, 0x1a108,
1433 0x1a114, 0x1a120,
1434 0x1a128, 0x1a130,
1435 0x1a138, 0x1a138,
1436 0x1a190, 0x1a1c4,
1437 0x1a1fc, 0x1a1fc,
1438 0x1e008, 0x1e00c,
1439 0x1e040, 0x1e044,
1440 0x1e04c, 0x1e04c,
1441 0x1e284, 0x1e290,
1442 0x1e2c0, 0x1e2c0,
1443 0x1e2e0, 0x1e2e0,
1444 0x1e300, 0x1e384,
1445 0x1e3c0, 0x1e3c8,
1446 0x1e408, 0x1e40c,
1447 0x1e440, 0x1e444,
1448 0x1e44c, 0x1e44c,
1449 0x1e684, 0x1e690,
1450 0x1e6c0, 0x1e6c0,
1451 0x1e6e0, 0x1e6e0,
1452 0x1e700, 0x1e784,
1453 0x1e7c0, 0x1e7c8,
1454 0x1e808, 0x1e80c,
1455 0x1e840, 0x1e844,
1456 0x1e84c, 0x1e84c,
1457 0x1ea84, 0x1ea90,
1458 0x1eac0, 0x1eac0,
1459 0x1eae0, 0x1eae0,
1460 0x1eb00, 0x1eb84,
1461 0x1ebc0, 0x1ebc8,
1462 0x1ec08, 0x1ec0c,
1463 0x1ec40, 0x1ec44,
1464 0x1ec4c, 0x1ec4c,
1465 0x1ee84, 0x1ee90,
1466 0x1eec0, 0x1eec0,
1467 0x1eee0, 0x1eee0,
1468 0x1ef00, 0x1ef84,
1469 0x1efc0, 0x1efc8,
1470 0x1f008, 0x1f00c,
1471 0x1f040, 0x1f044,
1472 0x1f04c, 0x1f04c,
1473 0x1f284, 0x1f290,
1474 0x1f2c0, 0x1f2c0,
1475 0x1f2e0, 0x1f2e0,
1476 0x1f300, 0x1f384,
1477 0x1f3c0, 0x1f3c8,
1478 0x1f408, 0x1f40c,
1479 0x1f440, 0x1f444,
1480 0x1f44c, 0x1f44c,
1481 0x1f684, 0x1f690,
1482 0x1f6c0, 0x1f6c0,
1483 0x1f6e0, 0x1f6e0,
1484 0x1f700, 0x1f784,
1485 0x1f7c0, 0x1f7c8,
1486 0x1f808, 0x1f80c,
1487 0x1f840, 0x1f844,
1488 0x1f84c, 0x1f84c,
1489 0x1fa84, 0x1fa90,
1490 0x1fac0, 0x1fac0,
1491 0x1fae0, 0x1fae0,
1492 0x1fb00, 0x1fb84,
1493 0x1fbc0, 0x1fbc8,
1494 0x1fc08, 0x1fc0c,
1495 0x1fc40, 0x1fc44,
1496 0x1fc4c, 0x1fc4c,
1497 0x1fe84, 0x1fe90,
1498 0x1fec0, 0x1fec0,
1499 0x1fee0, 0x1fee0,
1500 0x1ff00, 0x1ff84,
1501 0x1ffc0, 0x1ffc8,
1502 0x30000, 0x30030,
1503 0x30100, 0x30144,
1504 0x30190, 0x301a0,
1505 0x301a8, 0x301b8,
1506 0x301c4, 0x301c8,
1507 0x301d0, 0x301d0,
1508 0x30200, 0x30318,
1509 0x30400, 0x304b4,
1510 0x304c0, 0x3052c,
1511 0x30540, 0x3061c,
1512 0x30800, 0x30828,
1513 0x30834, 0x30834,
1514 0x308c0, 0x30908,
1515 0x30910, 0x309ac,
1516 0x30a00, 0x30a14,
1517 0x30a1c, 0x30a2c,
1518 0x30a44, 0x30a50,
1519 0x30a74, 0x30a74,
1520 0x30a7c, 0x30afc,
1521 0x30b08, 0x30c24,
1522 0x30d00, 0x30d00,
1523 0x30d08, 0x30d14,
1524 0x30d1c, 0x30d20,
1525 0x30d3c, 0x30d3c,
1526 0x30d48, 0x30d50,
1527 0x31200, 0x3120c,
1528 0x31220, 0x31220,
1529 0x31240, 0x31240,
1530 0x31600, 0x3160c,
1531 0x31a00, 0x31a1c,
1532 0x31e00, 0x31e20,
1533 0x31e38, 0x31e3c,
1534 0x31e80, 0x31e80,
1535 0x31e88, 0x31ea8,
1536 0x31eb0, 0x31eb4,
1537 0x31ec8, 0x31ed4,
1538 0x31fb8, 0x32004,
1539 0x32200, 0x32200,
1540 0x32208, 0x32240,
1541 0x32248, 0x32280,
1542 0x32288, 0x322c0,
1543 0x322c8, 0x322fc,
1544 0x32600, 0x32630,
1545 0x32a00, 0x32abc,
1546 0x32b00, 0x32b10,
1547 0x32b20, 0x32b30,
1548 0x32b40, 0x32b50,
1549 0x32b60, 0x32b70,
1550 0x33000, 0x33028,
1551 0x33030, 0x33048,
1552 0x33060, 0x33068,
1553 0x33070, 0x3309c,
1554 0x330f0, 0x33128,
1555 0x33130, 0x33148,
1556 0x33160, 0x33168,
1557 0x33170, 0x3319c,
1558 0x331f0, 0x33238,
1559 0x33240, 0x33240,
1560 0x33248, 0x33250,
1561 0x3325c, 0x33264,
1562 0x33270, 0x332b8,
1563 0x332c0, 0x332e4,
1564 0x332f8, 0x33338,
1565 0x33340, 0x33340,
1566 0x33348, 0x33350,
1567 0x3335c, 0x33364,
1568 0x33370, 0x333b8,
1569 0x333c0, 0x333e4,
1570 0x333f8, 0x33428,
1571 0x33430, 0x33448,
1572 0x33460, 0x33468,
1573 0x33470, 0x3349c,
1574 0x334f0, 0x33528,
1575 0x33530, 0x33548,
1576 0x33560, 0x33568,
1577 0x33570, 0x3359c,
1578 0x335f0, 0x33638,
1579 0x33640, 0x33640,
1580 0x33648, 0x33650,
1581 0x3365c, 0x33664,
1582 0x33670, 0x336b8,
1583 0x336c0, 0x336e4,
1584 0x336f8, 0x33738,
1585 0x33740, 0x33740,
1586 0x33748, 0x33750,
1587 0x3375c, 0x33764,
1588 0x33770, 0x337b8,
1589 0x337c0, 0x337e4,
1590 0x337f8, 0x337fc,
1591 0x33814, 0x33814,
1592 0x3382c, 0x3382c,
1593 0x33880, 0x3388c,
1594 0x338e8, 0x338ec,
1595 0x33900, 0x33928,
1596 0x33930, 0x33948,
1597 0x33960, 0x33968,
1598 0x33970, 0x3399c,
1599 0x339f0, 0x33a38,
1600 0x33a40, 0x33a40,
1601 0x33a48, 0x33a50,
1602 0x33a5c, 0x33a64,
1603 0x33a70, 0x33ab8,
1604 0x33ac0, 0x33ae4,
1605 0x33af8, 0x33b10,
1606 0x33b28, 0x33b28,
1607 0x33b3c, 0x33b50,
1608 0x33bf0, 0x33c10,
1609 0x33c28, 0x33c28,
1610 0x33c3c, 0x33c50,
1611 0x33cf0, 0x33cfc,
1612 0x34000, 0x34030,
1613 0x34100, 0x34144,
1614 0x34190, 0x341a0,
1615 0x341a8, 0x341b8,
1616 0x341c4, 0x341c8,
1617 0x341d0, 0x341d0,
1618 0x34200, 0x34318,
1619 0x34400, 0x344b4,
1620 0x344c0, 0x3452c,
1621 0x34540, 0x3461c,
1622 0x34800, 0x34828,
1623 0x34834, 0x34834,
1624 0x348c0, 0x34908,
1625 0x34910, 0x349ac,
1626 0x34a00, 0x34a14,
1627 0x34a1c, 0x34a2c,
1628 0x34a44, 0x34a50,
1629 0x34a74, 0x34a74,
1630 0x34a7c, 0x34afc,
1631 0x34b08, 0x34c24,
1632 0x34d00, 0x34d00,
1633 0x34d08, 0x34d14,
1634 0x34d1c, 0x34d20,
1635 0x34d3c, 0x34d3c,
1636 0x34d48, 0x34d50,
1637 0x35200, 0x3520c,
1638 0x35220, 0x35220,
1639 0x35240, 0x35240,
1640 0x35600, 0x3560c,
1641 0x35a00, 0x35a1c,
1642 0x35e00, 0x35e20,
1643 0x35e38, 0x35e3c,
1644 0x35e80, 0x35e80,
1645 0x35e88, 0x35ea8,
1646 0x35eb0, 0x35eb4,
1647 0x35ec8, 0x35ed4,
1648 0x35fb8, 0x36004,
1649 0x36200, 0x36200,
1650 0x36208, 0x36240,
1651 0x36248, 0x36280,
1652 0x36288, 0x362c0,
1653 0x362c8, 0x362fc,
1654 0x36600, 0x36630,
1655 0x36a00, 0x36abc,
1656 0x36b00, 0x36b10,
1657 0x36b20, 0x36b30,
1658 0x36b40, 0x36b50,
1659 0x36b60, 0x36b70,
1660 0x37000, 0x37028,
1661 0x37030, 0x37048,
1662 0x37060, 0x37068,
1663 0x37070, 0x3709c,
1664 0x370f0, 0x37128,
1665 0x37130, 0x37148,
1666 0x37160, 0x37168,
1667 0x37170, 0x3719c,
1668 0x371f0, 0x37238,
1669 0x37240, 0x37240,
1670 0x37248, 0x37250,
1671 0x3725c, 0x37264,
1672 0x37270, 0x372b8,
1673 0x372c0, 0x372e4,
1674 0x372f8, 0x37338,
1675 0x37340, 0x37340,
1676 0x37348, 0x37350,
1677 0x3735c, 0x37364,
1678 0x37370, 0x373b8,
1679 0x373c0, 0x373e4,
1680 0x373f8, 0x37428,
1681 0x37430, 0x37448,
1682 0x37460, 0x37468,
1683 0x37470, 0x3749c,
1684 0x374f0, 0x37528,
1685 0x37530, 0x37548,
1686 0x37560, 0x37568,
1687 0x37570, 0x3759c,
1688 0x375f0, 0x37638,
1689 0x37640, 0x37640,
1690 0x37648, 0x37650,
1691 0x3765c, 0x37664,
1692 0x37670, 0x376b8,
1693 0x376c0, 0x376e4,
1694 0x376f8, 0x37738,
1695 0x37740, 0x37740,
1696 0x37748, 0x37750,
1697 0x3775c, 0x37764,
1698 0x37770, 0x377b8,
1699 0x377c0, 0x377e4,
1700 0x377f8, 0x377fc,
1701 0x37814, 0x37814,
1702 0x3782c, 0x3782c,
1703 0x37880, 0x3788c,
1704 0x378e8, 0x378ec,
1705 0x37900, 0x37928,
1706 0x37930, 0x37948,
1707 0x37960, 0x37968,
1708 0x37970, 0x3799c,
1709 0x379f0, 0x37a38,
1710 0x37a40, 0x37a40,
1711 0x37a48, 0x37a50,
1712 0x37a5c, 0x37a64,
1713 0x37a70, 0x37ab8,
1714 0x37ac0, 0x37ae4,
1715 0x37af8, 0x37b10,
1716 0x37b28, 0x37b28,
1717 0x37b3c, 0x37b50,
1718 0x37bf0, 0x37c10,
1719 0x37c28, 0x37c28,
1720 0x37c3c, 0x37c50,
1721 0x37cf0, 0x37cfc,
1722 0x38000, 0x38030,
1723 0x38100, 0x38144,
1724 0x38190, 0x381a0,
1725 0x381a8, 0x381b8,
1726 0x381c4, 0x381c8,
1727 0x381d0, 0x381d0,
1728 0x38200, 0x38318,
1729 0x38400, 0x384b4,
1730 0x384c0, 0x3852c,
1731 0x38540, 0x3861c,
1732 0x38800, 0x38828,
1733 0x38834, 0x38834,
1734 0x388c0, 0x38908,
1735 0x38910, 0x389ac,
1736 0x38a00, 0x38a14,
1737 0x38a1c, 0x38a2c,
1738 0x38a44, 0x38a50,
1739 0x38a74, 0x38a74,
1740 0x38a7c, 0x38afc,
1741 0x38b08, 0x38c24,
1742 0x38d00, 0x38d00,
1743 0x38d08, 0x38d14,
1744 0x38d1c, 0x38d20,
1745 0x38d3c, 0x38d3c,
1746 0x38d48, 0x38d50,
1747 0x39200, 0x3920c,
1748 0x39220, 0x39220,
1749 0x39240, 0x39240,
1750 0x39600, 0x3960c,
1751 0x39a00, 0x39a1c,
1752 0x39e00, 0x39e20,
1753 0x39e38, 0x39e3c,
1754 0x39e80, 0x39e80,
1755 0x39e88, 0x39ea8,
1756 0x39eb0, 0x39eb4,
1757 0x39ec8, 0x39ed4,
1758 0x39fb8, 0x3a004,
1759 0x3a200, 0x3a200,
1760 0x3a208, 0x3a240,
1761 0x3a248, 0x3a280,
1762 0x3a288, 0x3a2c0,
1763 0x3a2c8, 0x3a2fc,
1764 0x3a600, 0x3a630,
1765 0x3aa00, 0x3aabc,
1766 0x3ab00, 0x3ab10,
1767 0x3ab20, 0x3ab30,
1768 0x3ab40, 0x3ab50,
1769 0x3ab60, 0x3ab70,
1770 0x3b000, 0x3b028,
1771 0x3b030, 0x3b048,
1772 0x3b060, 0x3b068,
1773 0x3b070, 0x3b09c,
1774 0x3b0f0, 0x3b128,
1775 0x3b130, 0x3b148,
1776 0x3b160, 0x3b168,
1777 0x3b170, 0x3b19c,
1778 0x3b1f0, 0x3b238,
1779 0x3b240, 0x3b240,
1780 0x3b248, 0x3b250,
1781 0x3b25c, 0x3b264,
1782 0x3b270, 0x3b2b8,
1783 0x3b2c0, 0x3b2e4,
1784 0x3b2f8, 0x3b338,
1785 0x3b340, 0x3b340,
1786 0x3b348, 0x3b350,
1787 0x3b35c, 0x3b364,
1788 0x3b370, 0x3b3b8,
1789 0x3b3c0, 0x3b3e4,
1790 0x3b3f8, 0x3b428,
1791 0x3b430, 0x3b448,
1792 0x3b460, 0x3b468,
1793 0x3b470, 0x3b49c,
1794 0x3b4f0, 0x3b528,
1795 0x3b530, 0x3b548,
1796 0x3b560, 0x3b568,
1797 0x3b570, 0x3b59c,
1798 0x3b5f0, 0x3b638,
1799 0x3b640, 0x3b640,
1800 0x3b648, 0x3b650,
1801 0x3b65c, 0x3b664,
1802 0x3b670, 0x3b6b8,
1803 0x3b6c0, 0x3b6e4,
1804 0x3b6f8, 0x3b738,
1805 0x3b740, 0x3b740,
1806 0x3b748, 0x3b750,
1807 0x3b75c, 0x3b764,
1808 0x3b770, 0x3b7b8,
1809 0x3b7c0, 0x3b7e4,
1810 0x3b7f8, 0x3b7fc,
1811 0x3b814, 0x3b814,
1812 0x3b82c, 0x3b82c,
1813 0x3b880, 0x3b88c,
1814 0x3b8e8, 0x3b8ec,
1815 0x3b900, 0x3b928,
1816 0x3b930, 0x3b948,
1817 0x3b960, 0x3b968,
1818 0x3b970, 0x3b99c,
1819 0x3b9f0, 0x3ba38,
1820 0x3ba40, 0x3ba40,
1821 0x3ba48, 0x3ba50,
1822 0x3ba5c, 0x3ba64,
1823 0x3ba70, 0x3bab8,
1824 0x3bac0, 0x3bae4,
1825 0x3baf8, 0x3bb10,
1826 0x3bb28, 0x3bb28,
1827 0x3bb3c, 0x3bb50,
1828 0x3bbf0, 0x3bc10,
1829 0x3bc28, 0x3bc28,
1830 0x3bc3c, 0x3bc50,
1831 0x3bcf0, 0x3bcfc,
1832 0x3c000, 0x3c030,
1833 0x3c100, 0x3c144,
1834 0x3c190, 0x3c1a0,
1835 0x3c1a8, 0x3c1b8,
1836 0x3c1c4, 0x3c1c8,
1837 0x3c1d0, 0x3c1d0,
1838 0x3c200, 0x3c318,
1839 0x3c400, 0x3c4b4,
1840 0x3c4c0, 0x3c52c,
1841 0x3c540, 0x3c61c,
1842 0x3c800, 0x3c828,
1843 0x3c834, 0x3c834,
1844 0x3c8c0, 0x3c908,
1845 0x3c910, 0x3c9ac,
1846 0x3ca00, 0x3ca14,
1847 0x3ca1c, 0x3ca2c,
1848 0x3ca44, 0x3ca50,
1849 0x3ca74, 0x3ca74,
1850 0x3ca7c, 0x3cafc,
1851 0x3cb08, 0x3cc24,
1852 0x3cd00, 0x3cd00,
1853 0x3cd08, 0x3cd14,
1854 0x3cd1c, 0x3cd20,
1855 0x3cd3c, 0x3cd3c,
1856 0x3cd48, 0x3cd50,
1857 0x3d200, 0x3d20c,
1858 0x3d220, 0x3d220,
1859 0x3d240, 0x3d240,
1860 0x3d600, 0x3d60c,
1861 0x3da00, 0x3da1c,
1862 0x3de00, 0x3de20,
1863 0x3de38, 0x3de3c,
1864 0x3de80, 0x3de80,
1865 0x3de88, 0x3dea8,
1866 0x3deb0, 0x3deb4,
1867 0x3dec8, 0x3ded4,
1868 0x3dfb8, 0x3e004,
1869 0x3e200, 0x3e200,
1870 0x3e208, 0x3e240,
1871 0x3e248, 0x3e280,
1872 0x3e288, 0x3e2c0,
1873 0x3e2c8, 0x3e2fc,
1874 0x3e600, 0x3e630,
1875 0x3ea00, 0x3eabc,
1876 0x3eb00, 0x3eb10,
1877 0x3eb20, 0x3eb30,
1878 0x3eb40, 0x3eb50,
1879 0x3eb60, 0x3eb70,
1880 0x3f000, 0x3f028,
1881 0x3f030, 0x3f048,
1882 0x3f060, 0x3f068,
1883 0x3f070, 0x3f09c,
1884 0x3f0f0, 0x3f128,
1885 0x3f130, 0x3f148,
1886 0x3f160, 0x3f168,
1887 0x3f170, 0x3f19c,
1888 0x3f1f0, 0x3f238,
1889 0x3f240, 0x3f240,
1890 0x3f248, 0x3f250,
1891 0x3f25c, 0x3f264,
1892 0x3f270, 0x3f2b8,
1893 0x3f2c0, 0x3f2e4,
1894 0x3f2f8, 0x3f338,
1895 0x3f340, 0x3f340,
1896 0x3f348, 0x3f350,
1897 0x3f35c, 0x3f364,
1898 0x3f370, 0x3f3b8,
1899 0x3f3c0, 0x3f3e4,
1900 0x3f3f8, 0x3f428,
1901 0x3f430, 0x3f448,
1902 0x3f460, 0x3f468,
1903 0x3f470, 0x3f49c,
1904 0x3f4f0, 0x3f528,
1905 0x3f530, 0x3f548,
1906 0x3f560, 0x3f568,
1907 0x3f570, 0x3f59c,
1908 0x3f5f0, 0x3f638,
1909 0x3f640, 0x3f640,
1910 0x3f648, 0x3f650,
1911 0x3f65c, 0x3f664,
1912 0x3f670, 0x3f6b8,
1913 0x3f6c0, 0x3f6e4,
1914 0x3f6f8, 0x3f738,
1915 0x3f740, 0x3f740,
1916 0x3f748, 0x3f750,
1917 0x3f75c, 0x3f764,
1918 0x3f770, 0x3f7b8,
1919 0x3f7c0, 0x3f7e4,
1920 0x3f7f8, 0x3f7fc,
1921 0x3f814, 0x3f814,
1922 0x3f82c, 0x3f82c,
1923 0x3f880, 0x3f88c,
1924 0x3f8e8, 0x3f8ec,
1925 0x3f900, 0x3f928,
1926 0x3f930, 0x3f948,
1927 0x3f960, 0x3f968,
1928 0x3f970, 0x3f99c,
1929 0x3f9f0, 0x3fa38,
1930 0x3fa40, 0x3fa40,
1931 0x3fa48, 0x3fa50,
1932 0x3fa5c, 0x3fa64,
1933 0x3fa70, 0x3fab8,
1934 0x3fac0, 0x3fae4,
1935 0x3faf8, 0x3fb10,
1936 0x3fb28, 0x3fb28,
1937 0x3fb3c, 0x3fb50,
1938 0x3fbf0, 0x3fc10,
1939 0x3fc28, 0x3fc28,
1940 0x3fc3c, 0x3fc50,
1941 0x3fcf0, 0x3fcfc,
1942 0x40000, 0x4000c,
1943 0x40040, 0x40050,
1944 0x40060, 0x40068,
1945 0x4007c, 0x4008c,
1946 0x40094, 0x400b0,
1947 0x400c0, 0x40144,
1948 0x40180, 0x4018c,
1949 0x40200, 0x40254,
1950 0x40260, 0x40264,
1951 0x40270, 0x40288,
1952 0x40290, 0x40298,
1953 0x402ac, 0x402c8,
1954 0x402d0, 0x402e0,
1955 0x402f0, 0x402f0,
1956 0x40300, 0x4033c,
1957 0x403f8, 0x403fc,
1958 0x41304, 0x413c4,
1959 0x41400, 0x4140c,
1960 0x41414, 0x4141c,
1961 0x41480, 0x414d0,
1962 0x44000, 0x44054,
1963 0x4405c, 0x44078,
1964 0x440c0, 0x44174,
1965 0x44180, 0x441ac,
1966 0x441b4, 0x441b8,
1967 0x441c0, 0x44254,
1968 0x4425c, 0x44278,
1969 0x442c0, 0x44374,
1970 0x44380, 0x443ac,
1971 0x443b4, 0x443b8,
1972 0x443c0, 0x44454,
1973 0x4445c, 0x44478,
1974 0x444c0, 0x44574,
1975 0x44580, 0x445ac,
1976 0x445b4, 0x445b8,
1977 0x445c0, 0x44654,
1978 0x4465c, 0x44678,
1979 0x446c0, 0x44774,
1980 0x44780, 0x447ac,
1981 0x447b4, 0x447b8,
1982 0x447c0, 0x44854,
1983 0x4485c, 0x44878,
1984 0x448c0, 0x44974,
1985 0x44980, 0x449ac,
1986 0x449b4, 0x449b8,
1987 0x449c0, 0x449fc,
1988 0x45000, 0x45004,
1989 0x45010, 0x45030,
1990 0x45040, 0x45060,
1991 0x45068, 0x45068,
1992 0x45080, 0x45084,
1993 0x450a0, 0x450b0,
1994 0x45200, 0x45204,
1995 0x45210, 0x45230,
1996 0x45240, 0x45260,
1997 0x45268, 0x45268,
1998 0x45280, 0x45284,
1999 0x452a0, 0x452b0,
2000 0x460c0, 0x460e4,
2001 0x47000, 0x4703c,
2002 0x47044, 0x4708c,
2003 0x47200, 0x47250,
2004 0x47400, 0x47408,
2005 0x47414, 0x47420,
2006 0x47600, 0x47618,
2007 0x47800, 0x47814,
2008 0x48000, 0x4800c,
2009 0x48040, 0x48050,
2010 0x48060, 0x48068,
2011 0x4807c, 0x4808c,
2012 0x48094, 0x480b0,
2013 0x480c0, 0x48144,
2014 0x48180, 0x4818c,
2015 0x48200, 0x48254,
2016 0x48260, 0x48264,
2017 0x48270, 0x48288,
2018 0x48290, 0x48298,
2019 0x482ac, 0x482c8,
2020 0x482d0, 0x482e0,
2021 0x482f0, 0x482f0,
2022 0x48300, 0x4833c,
2023 0x483f8, 0x483fc,
2024 0x49304, 0x493c4,
2025 0x49400, 0x4940c,
2026 0x49414, 0x4941c,
2027 0x49480, 0x494d0,
2028 0x4c000, 0x4c054,
2029 0x4c05c, 0x4c078,
2030 0x4c0c0, 0x4c174,
2031 0x4c180, 0x4c1ac,
2032 0x4c1b4, 0x4c1b8,
2033 0x4c1c0, 0x4c254,
2034 0x4c25c, 0x4c278,
2035 0x4c2c0, 0x4c374,
2036 0x4c380, 0x4c3ac,
2037 0x4c3b4, 0x4c3b8,
2038 0x4c3c0, 0x4c454,
2039 0x4c45c, 0x4c478,
2040 0x4c4c0, 0x4c574,
2041 0x4c580, 0x4c5ac,
2042 0x4c5b4, 0x4c5b8,
2043 0x4c5c0, 0x4c654,
2044 0x4c65c, 0x4c678,
2045 0x4c6c0, 0x4c774,
2046 0x4c780, 0x4c7ac,
2047 0x4c7b4, 0x4c7b8,
2048 0x4c7c0, 0x4c854,
2049 0x4c85c, 0x4c878,
2050 0x4c8c0, 0x4c974,
2051 0x4c980, 0x4c9ac,
2052 0x4c9b4, 0x4c9b8,
2053 0x4c9c0, 0x4c9fc,
2054 0x4d000, 0x4d004,
2055 0x4d010, 0x4d030,
2056 0x4d040, 0x4d060,
2057 0x4d068, 0x4d068,
2058 0x4d080, 0x4d084,
2059 0x4d0a0, 0x4d0b0,
2060 0x4d200, 0x4d204,
2061 0x4d210, 0x4d230,
2062 0x4d240, 0x4d260,
2063 0x4d268, 0x4d268,
2064 0x4d280, 0x4d284,
2065 0x4d2a0, 0x4d2b0,
2066 0x4e0c0, 0x4e0e4,
2067 0x4f000, 0x4f03c,
2068 0x4f044, 0x4f08c,
2069 0x4f200, 0x4f250,
2070 0x4f400, 0x4f408,
2071 0x4f414, 0x4f420,
2072 0x4f600, 0x4f618,
2073 0x4f800, 0x4f814,
2074 0x50000, 0x50084,
2075 0x50090, 0x500cc,
2076 0x50400, 0x50400,
2077 0x50800, 0x50884,
2078 0x50890, 0x508cc,
2079 0x50c00, 0x50c00,
2080 0x51000, 0x5101c,
2081 0x51300, 0x51308,
2082 };
2083
2084 static const unsigned int t6_reg_ranges[] = {
2085 0x1008, 0x101c,
2086 0x1024, 0x10a8,
2087 0x10b4, 0x10f8,
2088 0x1100, 0x1114,
2089 0x111c, 0x112c,
2090 0x1138, 0x113c,
2091 0x1144, 0x114c,
2092 0x1180, 0x1184,
2093 0x1190, 0x1194,
2094 0x11a0, 0x11a4,
2095 0x11b0, 0x11b4,
2096 0x11fc, 0x1274,
2097 0x1280, 0x133c,
2098 0x1800, 0x18fc,
2099 0x3000, 0x302c,
2100 0x3060, 0x30b0,
2101 0x30b8, 0x30d8,
2102 0x30e0, 0x30fc,
2103 0x3140, 0x357c,
2104 0x35a8, 0x35cc,
2105 0x35ec, 0x35ec,
2106 0x3600, 0x5624,
2107 0x56cc, 0x56ec,
2108 0x56f4, 0x5720,
2109 0x5728, 0x575c,
2110 0x580c, 0x5814,
2111 0x5890, 0x589c,
2112 0x58a4, 0x58ac,
2113 0x58b8, 0x58bc,
2114 0x5940, 0x595c,
2115 0x5980, 0x598c,
2116 0x59b0, 0x59c8,
2117 0x59d0, 0x59dc,
2118 0x59fc, 0x5a18,
2119 0x5a60, 0x5a6c,
2120 0x5a80, 0x5a8c,
2121 0x5a94, 0x5a9c,
2122 0x5b94, 0x5bfc,
2123 0x5c10, 0x5e48,
2124 0x5e50, 0x5e94,
2125 0x5ea0, 0x5eb0,
2126 0x5ec0, 0x5ec0,
2127 0x5ec8, 0x5ed0,
2128 0x5ee0, 0x5ee0,
2129 0x5ef0, 0x5ef0,
2130 0x5f00, 0x5f00,
2131 0x6000, 0x6020,
2132 0x6028, 0x6040,
2133 0x6058, 0x609c,
2134 0x60a8, 0x619c,
2135 0x7700, 0x7798,
2136 0x77c0, 0x7880,
2137 0x78cc, 0x78fc,
2138 0x7b00, 0x7b58,
2139 0x7b60, 0x7b84,
2140 0x7b8c, 0x7c54,
2141 0x7d00, 0x7d38,
2142 0x7d40, 0x7d84,
2143 0x7d8c, 0x7ddc,
2144 0x7de4, 0x7e04,
2145 0x7e10, 0x7e1c,
2146 0x7e24, 0x7e38,
2147 0x7e40, 0x7e44,
2148 0x7e4c, 0x7e78,
2149 0x7e80, 0x7edc,
2150 0x7ee8, 0x7efc,
2151 0x8dc0, 0x8de4,
2152 0x8df8, 0x8e04,
2153 0x8e10, 0x8e84,
2154 0x8ea0, 0x8f88,
2155 0x8fb8, 0x9058,
2156 0x9060, 0x9060,
2157 0x9068, 0x90f8,
2158 0x9100, 0x9124,
2159 0x9400, 0x9470,
2160 0x9600, 0x9600,
2161 0x9608, 0x9638,
2162 0x9640, 0x9704,
2163 0x9710, 0x971c,
2164 0x9800, 0x9808,
2165 0x9820, 0x983c,
2166 0x9850, 0x9864,
2167 0x9c00, 0x9c6c,
2168 0x9c80, 0x9cec,
2169 0x9d00, 0x9d6c,
2170 0x9d80, 0x9dec,
2171 0x9e00, 0x9e6c,
2172 0x9e80, 0x9eec,
2173 0x9f00, 0x9f6c,
2174 0x9f80, 0xa020,
2175 0xd004, 0xd03c,
2176 0xd100, 0xd118,
2177 0xd200, 0xd214,
2178 0xd220, 0xd234,
2179 0xd240, 0xd254,
2180 0xd260, 0xd274,
2181 0xd280, 0xd294,
2182 0xd2a0, 0xd2b4,
2183 0xd2c0, 0xd2d4,
2184 0xd2e0, 0xd2f4,
2185 0xd300, 0xd31c,
2186 0xdfc0, 0xdfe0,
2187 0xe000, 0xf008,
2188 0xf010, 0xf018,
2189 0xf020, 0xf028,
2190 0x11000, 0x11014,
2191 0x11048, 0x1106c,
2192 0x11074, 0x11088,
2193 0x11098, 0x11120,
2194 0x1112c, 0x1117c,
2195 0x11190, 0x112e0,
2196 0x11300, 0x1130c,
2197 0x12000, 0x1206c,
2198 0x19040, 0x1906c,
2199 0x19078, 0x19080,
2200 0x1908c, 0x190e8,
2201 0x190f0, 0x190f8,
2202 0x19100, 0x19110,
2203 0x19120, 0x19124,
2204 0x19150, 0x19194,
2205 0x1919c, 0x191b0,
2206 0x191d0, 0x191e8,
2207 0x19238, 0x19290,
2208 0x192a4, 0x192b0,
2209 0x192bc, 0x192bc,
2210 0x19348, 0x1934c,
2211 0x193f8, 0x19418,
2212 0x19420, 0x19428,
2213 0x19430, 0x19444,
2214 0x1944c, 0x1946c,
2215 0x19474, 0x19474,
2216 0x19490, 0x194cc,
2217 0x194f0, 0x194f8,
2218 0x19c00, 0x19c48,
2219 0x19c50, 0x19c80,
2220 0x19c94, 0x19c98,
2221 0x19ca0, 0x19cbc,
2222 0x19ce4, 0x19ce4,
2223 0x19cf0, 0x19cf8,
2224 0x19d00, 0x19d28,
2225 0x19d50, 0x19d78,
2226 0x19d94, 0x19d98,
2227 0x19da0, 0x19dc8,
2228 0x19df0, 0x19e10,
2229 0x19e50, 0x19e6c,
2230 0x19ea0, 0x19ebc,
2231 0x19ec4, 0x19ef4,
2232 0x19f04, 0x19f2c,
2233 0x19f34, 0x19f34,
2234 0x19f40, 0x19f50,
2235 0x19f90, 0x19fac,
2236 0x19fc4, 0x19fc8,
2237 0x19fd0, 0x19fe4,
2238 0x1a000, 0x1a004,
2239 0x1a010, 0x1a06c,
2240 0x1a0b0, 0x1a0e4,
2241 0x1a0ec, 0x1a0f8,
2242 0x1a100, 0x1a108,
2243 0x1a114, 0x1a120,
2244 0x1a128, 0x1a130,
2245 0x1a138, 0x1a138,
2246 0x1a190, 0x1a1c4,
2247 0x1a1fc, 0x1a1fc,
2248 0x1e008, 0x1e00c,
2249 0x1e040, 0x1e044,
2250 0x1e04c, 0x1e04c,
2251 0x1e284, 0x1e290,
2252 0x1e2c0, 0x1e2c0,
2253 0x1e2e0, 0x1e2e0,
2254 0x1e300, 0x1e384,
2255 0x1e3c0, 0x1e3c8,
2256 0x1e408, 0x1e40c,
2257 0x1e440, 0x1e444,
2258 0x1e44c, 0x1e44c,
2259 0x1e684, 0x1e690,
2260 0x1e6c0, 0x1e6c0,
2261 0x1e6e0, 0x1e6e0,
2262 0x1e700, 0x1e784,
2263 0x1e7c0, 0x1e7c8,
2264 0x1e808, 0x1e80c,
2265 0x1e840, 0x1e844,
2266 0x1e84c, 0x1e84c,
2267 0x1ea84, 0x1ea90,
2268 0x1eac0, 0x1eac0,
2269 0x1eae0, 0x1eae0,
2270 0x1eb00, 0x1eb84,
2271 0x1ebc0, 0x1ebc8,
2272 0x1ec08, 0x1ec0c,
2273 0x1ec40, 0x1ec44,
2274 0x1ec4c, 0x1ec4c,
2275 0x1ee84, 0x1ee90,
2276 0x1eec0, 0x1eec0,
2277 0x1eee0, 0x1eee0,
2278 0x1ef00, 0x1ef84,
2279 0x1efc0, 0x1efc8,
2280 0x1f008, 0x1f00c,
2281 0x1f040, 0x1f044,
2282 0x1f04c, 0x1f04c,
2283 0x1f284, 0x1f290,
2284 0x1f2c0, 0x1f2c0,
2285 0x1f2e0, 0x1f2e0,
2286 0x1f300, 0x1f384,
2287 0x1f3c0, 0x1f3c8,
2288 0x1f408, 0x1f40c,
2289 0x1f440, 0x1f444,
2290 0x1f44c, 0x1f44c,
2291 0x1f684, 0x1f690,
2292 0x1f6c0, 0x1f6c0,
2293 0x1f6e0, 0x1f6e0,
2294 0x1f700, 0x1f784,
2295 0x1f7c0, 0x1f7c8,
2296 0x1f808, 0x1f80c,
2297 0x1f840, 0x1f844,
2298 0x1f84c, 0x1f84c,
2299 0x1fa84, 0x1fa90,
2300 0x1fac0, 0x1fac0,
2301 0x1fae0, 0x1fae0,
2302 0x1fb00, 0x1fb84,
2303 0x1fbc0, 0x1fbc8,
2304 0x1fc08, 0x1fc0c,
2305 0x1fc40, 0x1fc44,
2306 0x1fc4c, 0x1fc4c,
2307 0x1fe84, 0x1fe90,
2308 0x1fec0, 0x1fec0,
2309 0x1fee0, 0x1fee0,
2310 0x1ff00, 0x1ff84,
2311 0x1ffc0, 0x1ffc8,
2312 0x30000, 0x30030,
2313 0x30100, 0x30168,
2314 0x30190, 0x301a0,
2315 0x301a8, 0x301b8,
2316 0x301c4, 0x301c8,
2317 0x301d0, 0x301d0,
2318 0x30200, 0x30320,
2319 0x30400, 0x304b4,
2320 0x304c0, 0x3052c,
2321 0x30540, 0x3061c,
2322 0x30800, 0x308a0,
2323 0x308c0, 0x30908,
2324 0x30910, 0x309b8,
2325 0x30a00, 0x30a04,
2326 0x30a0c, 0x30a14,
2327 0x30a1c, 0x30a2c,
2328 0x30a44, 0x30a50,
2329 0x30a74, 0x30a74,
2330 0x30a7c, 0x30afc,
2331 0x30b08, 0x30c24,
2332 0x30d00, 0x30d14,
2333 0x30d1c, 0x30d3c,
2334 0x30d44, 0x30d4c,
2335 0x30d54, 0x30d74,
2336 0x30d7c, 0x30d7c,
2337 0x30de0, 0x30de0,
2338 0x30e00, 0x30ed4,
2339 0x30f00, 0x30fa4,
2340 0x30fc0, 0x30fc4,
2341 0x31000, 0x31004,
2342 0x31080, 0x310fc,
2343 0x31208, 0x31220,
2344 0x3123c, 0x31254,
2345 0x31300, 0x31300,
2346 0x31308, 0x3131c,
2347 0x31338, 0x3133c,
2348 0x31380, 0x31380,
2349 0x31388, 0x313a8,
2350 0x313b4, 0x313b4,
2351 0x31400, 0x31420,
2352 0x31438, 0x3143c,
2353 0x31480, 0x31480,
2354 0x314a8, 0x314a8,
2355 0x314b0, 0x314b4,
2356 0x314c8, 0x314d4,
2357 0x31a40, 0x31a4c,
2358 0x31af0, 0x31b20,
2359 0x31b38, 0x31b3c,
2360 0x31b80, 0x31b80,
2361 0x31ba8, 0x31ba8,
2362 0x31bb0, 0x31bb4,
2363 0x31bc8, 0x31bd4,
2364 0x32140, 0x3218c,
2365 0x321f0, 0x321f4,
2366 0x32200, 0x32200,
2367 0x32218, 0x32218,
2368 0x32400, 0x32400,
2369 0x32408, 0x3241c,
2370 0x32618, 0x32620,
2371 0x32664, 0x32664,
2372 0x326a8, 0x326a8,
2373 0x326ec, 0x326ec,
2374 0x32a00, 0x32abc,
2375 0x32b00, 0x32b18,
2376 0x32b20, 0x32b38,
2377 0x32b40, 0x32b58,
2378 0x32b60, 0x32b78,
2379 0x32c00, 0x32c00,
2380 0x32c08, 0x32c3c,
2381 0x33000, 0x3302c,
2382 0x33034, 0x33050,
2383 0x33058, 0x33058,
2384 0x33060, 0x3308c,
2385 0x3309c, 0x330ac,
2386 0x330c0, 0x330c0,
2387 0x330c8, 0x330d0,
2388 0x330d8, 0x330e0,
2389 0x330ec, 0x3312c,
2390 0x33134, 0x33150,
2391 0x33158, 0x33158,
2392 0x33160, 0x3318c,
2393 0x3319c, 0x331ac,
2394 0x331c0, 0x331c0,
2395 0x331c8, 0x331d0,
2396 0x331d8, 0x331e0,
2397 0x331ec, 0x33290,
2398 0x33298, 0x332c4,
2399 0x332e4, 0x33390,
2400 0x33398, 0x333c4,
2401 0x333e4, 0x3342c,
2402 0x33434, 0x33450,
2403 0x33458, 0x33458,
2404 0x33460, 0x3348c,
2405 0x3349c, 0x334ac,
2406 0x334c0, 0x334c0,
2407 0x334c8, 0x334d0,
2408 0x334d8, 0x334e0,
2409 0x334ec, 0x3352c,
2410 0x33534, 0x33550,
2411 0x33558, 0x33558,
2412 0x33560, 0x3358c,
2413 0x3359c, 0x335ac,
2414 0x335c0, 0x335c0,
2415 0x335c8, 0x335d0,
2416 0x335d8, 0x335e0,
2417 0x335ec, 0x33690,
2418 0x33698, 0x336c4,
2419 0x336e4, 0x33790,
2420 0x33798, 0x337c4,
2421 0x337e4, 0x337fc,
2422 0x33814, 0x33814,
2423 0x33854, 0x33868,
2424 0x33880, 0x3388c,
2425 0x338c0, 0x338d0,
2426 0x338e8, 0x338ec,
2427 0x33900, 0x3392c,
2428 0x33934, 0x33950,
2429 0x33958, 0x33958,
2430 0x33960, 0x3398c,
2431 0x3399c, 0x339ac,
2432 0x339c0, 0x339c0,
2433 0x339c8, 0x339d0,
2434 0x339d8, 0x339e0,
2435 0x339ec, 0x33a90,
2436 0x33a98, 0x33ac4,
2437 0x33ae4, 0x33b10,
2438 0x33b24, 0x33b28,
2439 0x33b38, 0x33b50,
2440 0x33bf0, 0x33c10,
2441 0x33c24, 0x33c28,
2442 0x33c38, 0x33c50,
2443 0x33cf0, 0x33cfc,
2444 0x34000, 0x34030,
2445 0x34100, 0x34168,
2446 0x34190, 0x341a0,
2447 0x341a8, 0x341b8,
2448 0x341c4, 0x341c8,
2449 0x341d0, 0x341d0,
2450 0x34200, 0x34320,
2451 0x34400, 0x344b4,
2452 0x344c0, 0x3452c,
2453 0x34540, 0x3461c,
2454 0x34800, 0x348a0,
2455 0x348c0, 0x34908,
2456 0x34910, 0x349b8,
2457 0x34a00, 0x34a04,
2458 0x34a0c, 0x34a14,
2459 0x34a1c, 0x34a2c,
2460 0x34a44, 0x34a50,
2461 0x34a74, 0x34a74,
2462 0x34a7c, 0x34afc,
2463 0x34b08, 0x34c24,
2464 0x34d00, 0x34d14,
2465 0x34d1c, 0x34d3c,
2466 0x34d44, 0x34d4c,
2467 0x34d54, 0x34d74,
2468 0x34d7c, 0x34d7c,
2469 0x34de0, 0x34de0,
2470 0x34e00, 0x34ed4,
2471 0x34f00, 0x34fa4,
2472 0x34fc0, 0x34fc4,
2473 0x35000, 0x35004,
2474 0x35080, 0x350fc,
2475 0x35208, 0x35220,
2476 0x3523c, 0x35254,
2477 0x35300, 0x35300,
2478 0x35308, 0x3531c,
2479 0x35338, 0x3533c,
2480 0x35380, 0x35380,
2481 0x35388, 0x353a8,
2482 0x353b4, 0x353b4,
2483 0x35400, 0x35420,
2484 0x35438, 0x3543c,
2485 0x35480, 0x35480,
2486 0x354a8, 0x354a8,
2487 0x354b0, 0x354b4,
2488 0x354c8, 0x354d4,
2489 0x35a40, 0x35a4c,
2490 0x35af0, 0x35b20,
2491 0x35b38, 0x35b3c,
2492 0x35b80, 0x35b80,
2493 0x35ba8, 0x35ba8,
2494 0x35bb0, 0x35bb4,
2495 0x35bc8, 0x35bd4,
2496 0x36140, 0x3618c,
2497 0x361f0, 0x361f4,
2498 0x36200, 0x36200,
2499 0x36218, 0x36218,
2500 0x36400, 0x36400,
2501 0x36408, 0x3641c,
2502 0x36618, 0x36620,
2503 0x36664, 0x36664,
2504 0x366a8, 0x366a8,
2505 0x366ec, 0x366ec,
2506 0x36a00, 0x36abc,
2507 0x36b00, 0x36b18,
2508 0x36b20, 0x36b38,
2509 0x36b40, 0x36b58,
2510 0x36b60, 0x36b78,
2511 0x36c00, 0x36c00,
2512 0x36c08, 0x36c3c,
2513 0x37000, 0x3702c,
2514 0x37034, 0x37050,
2515 0x37058, 0x37058,
2516 0x37060, 0x3708c,
2517 0x3709c, 0x370ac,
2518 0x370c0, 0x370c0,
2519 0x370c8, 0x370d0,
2520 0x370d8, 0x370e0,
2521 0x370ec, 0x3712c,
2522 0x37134, 0x37150,
2523 0x37158, 0x37158,
2524 0x37160, 0x3718c,
2525 0x3719c, 0x371ac,
2526 0x371c0, 0x371c0,
2527 0x371c8, 0x371d0,
2528 0x371d8, 0x371e0,
2529 0x371ec, 0x37290,
2530 0x37298, 0x372c4,
2531 0x372e4, 0x37390,
2532 0x37398, 0x373c4,
2533 0x373e4, 0x3742c,
2534 0x37434, 0x37450,
2535 0x37458, 0x37458,
2536 0x37460, 0x3748c,
2537 0x3749c, 0x374ac,
2538 0x374c0, 0x374c0,
2539 0x374c8, 0x374d0,
2540 0x374d8, 0x374e0,
2541 0x374ec, 0x3752c,
2542 0x37534, 0x37550,
2543 0x37558, 0x37558,
2544 0x37560, 0x3758c,
2545 0x3759c, 0x375ac,
2546 0x375c0, 0x375c0,
2547 0x375c8, 0x375d0,
2548 0x375d8, 0x375e0,
2549 0x375ec, 0x37690,
2550 0x37698, 0x376c4,
2551 0x376e4, 0x37790,
2552 0x37798, 0x377c4,
2553 0x377e4, 0x377fc,
2554 0x37814, 0x37814,
2555 0x37854, 0x37868,
2556 0x37880, 0x3788c,
2557 0x378c0, 0x378d0,
2558 0x378e8, 0x378ec,
2559 0x37900, 0x3792c,
2560 0x37934, 0x37950,
2561 0x37958, 0x37958,
2562 0x37960, 0x3798c,
2563 0x3799c, 0x379ac,
2564 0x379c0, 0x379c0,
2565 0x379c8, 0x379d0,
2566 0x379d8, 0x379e0,
2567 0x379ec, 0x37a90,
2568 0x37a98, 0x37ac4,
2569 0x37ae4, 0x37b10,
2570 0x37b24, 0x37b28,
2571 0x37b38, 0x37b50,
2572 0x37bf0, 0x37c10,
2573 0x37c24, 0x37c28,
2574 0x37c38, 0x37c50,
2575 0x37cf0, 0x37cfc,
2576 0x40040, 0x40040,
2577 0x40080, 0x40084,
2578 0x40100, 0x40100,
2579 0x40140, 0x401bc,
2580 0x40200, 0x40214,
2581 0x40228, 0x40228,
2582 0x40240, 0x40258,
2583 0x40280, 0x40280,
2584 0x40304, 0x40304,
2585 0x40330, 0x4033c,
2586 0x41304, 0x413c8,
2587 0x413d0, 0x413dc,
2588 0x413f0, 0x413f0,
2589 0x41400, 0x4140c,
2590 0x41414, 0x4141c,
2591 0x41480, 0x414d0,
2592 0x44000, 0x4407c,
2593 0x440c0, 0x441ac,
2594 0x441b4, 0x4427c,
2595 0x442c0, 0x443ac,
2596 0x443b4, 0x4447c,
2597 0x444c0, 0x445ac,
2598 0x445b4, 0x4467c,
2599 0x446c0, 0x447ac,
2600 0x447b4, 0x4487c,
2601 0x448c0, 0x449ac,
2602 0x449b4, 0x44a7c,
2603 0x44ac0, 0x44bac,
2604 0x44bb4, 0x44c7c,
2605 0x44cc0, 0x44dac,
2606 0x44db4, 0x44e7c,
2607 0x44ec0, 0x44fac,
2608 0x44fb4, 0x4507c,
2609 0x450c0, 0x451ac,
2610 0x451b4, 0x451fc,
2611 0x45800, 0x45804,
2612 0x45810, 0x45830,
2613 0x45840, 0x45860,
2614 0x45868, 0x45868,
2615 0x45880, 0x45884,
2616 0x458a0, 0x458b0,
2617 0x45a00, 0x45a04,
2618 0x45a10, 0x45a30,
2619 0x45a40, 0x45a60,
2620 0x45a68, 0x45a68,
2621 0x45a80, 0x45a84,
2622 0x45aa0, 0x45ab0,
2623 0x460c0, 0x460e4,
2624 0x47000, 0x4703c,
2625 0x47044, 0x4708c,
2626 0x47200, 0x47250,
2627 0x47400, 0x47408,
2628 0x47414, 0x47420,
2629 0x47600, 0x47618,
2630 0x47800, 0x47814,
2631 0x47820, 0x4782c,
2632 0x50000, 0x50084,
2633 0x50090, 0x500cc,
2634 0x50300, 0x50384,
2635 0x50400, 0x50400,
2636 0x50800, 0x50884,
2637 0x50890, 0x508cc,
2638 0x50b00, 0x50b84,
2639 0x50c00, 0x50c00,
2640 0x51000, 0x51020,
2641 0x51028, 0x510b0,
2642 0x51300, 0x51324,
2643 };
2644
2645 u32 *buf_end = (u32 *)((char *)buf + buf_size);
2646 const unsigned int *reg_ranges;
2647 int reg_ranges_size, range;
2648 unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
2649
2650 /* Select the right set of register ranges to dump depending on the
2651 * adapter chip type.
2652 */
2653 switch (chip_version) {
2654 case CHELSIO_T4:
2655 reg_ranges = t4_reg_ranges;
2656 reg_ranges_size = ARRAY_SIZE(t4_reg_ranges);
2657 break;
2658
2659 case CHELSIO_T5:
2660 reg_ranges = t5_reg_ranges;
2661 reg_ranges_size = ARRAY_SIZE(t5_reg_ranges);
2662 break;
2663
2664 case CHELSIO_T6:
2665 reg_ranges = t6_reg_ranges;
2666 reg_ranges_size = ARRAY_SIZE(t6_reg_ranges);
2667 break;
2668
2669 default:
2670 dev_err(adap->pdev_dev,
2671 "Unsupported chip version %d\n", chip_version);
2672 return;
2673 }
2674
2675 /* Clear the register buffer and insert the appropriate register
2676 * values selected by the above register ranges.
2677 */
2678 memset(buf, 0, buf_size);
2679 for (range = 0; range < reg_ranges_size; range += 2) {
2680 unsigned int reg = reg_ranges[range];
2681 unsigned int last_reg = reg_ranges[range + 1];
2682 u32 *bufp = (u32 *)((char *)buf + reg);
2683
2684 /* Iterate across the register range filling in the register
2685 * buffer but don't write past the end of the register buffer.
2686 */
2687 while (reg <= last_reg && bufp < buf_end) {
2688 *bufp++ = t4_read_reg(adap, reg);
2689 reg += sizeof(u32);
2690 }
2691 }
2692 }
2693
2694 #define EEPROM_STAT_ADDR 0x7bfc
2695 #define VPD_BASE 0x400
2696 #define VPD_BASE_OLD 0
2697 #define VPD_LEN 1024
2698 #define CHELSIO_VPD_UNIQUE_ID 0x82
2699
2700 /**
2701 * t4_eeprom_ptov - translate a physical EEPROM address to virtual
2702 * @phys_addr: the physical EEPROM address
2703 * @fn: the PCI function number
2704 * @sz: size of function-specific area
2705 *
2706 * Translate a physical EEPROM address to virtual. The first 1K is
2707 * accessed through virtual addresses starting at 31K, the rest is
2708 * accessed through virtual addresses starting at 0.
2709 *
2710 * The mapping is as follows:
2711 * [0..1K) -> [31K..32K)
2712 * [1K..1K+A) -> [31K-A..31K)
2713 * [1K+A..ES) -> [0..ES-A-1K)
2714 *
2715 * where A = @fn * @sz, and ES = EEPROM size.
2716 */
t4_eeprom_ptov(unsigned int phys_addr,unsigned int fn,unsigned int sz)2717 int t4_eeprom_ptov(unsigned int phys_addr, unsigned int fn, unsigned int sz)
2718 {
2719 fn *= sz;
2720 if (phys_addr < 1024)
2721 return phys_addr + (31 << 10);
2722 if (phys_addr < 1024 + fn)
2723 return 31744 - fn + phys_addr - 1024;
2724 if (phys_addr < EEPROMSIZE)
2725 return phys_addr - 1024 - fn;
2726 return -EINVAL;
2727 }
2728
2729 /**
2730 * t4_seeprom_wp - enable/disable EEPROM write protection
2731 * @adapter: the adapter
2732 * @enable: whether to enable or disable write protection
2733 *
2734 * Enables or disables write protection on the serial EEPROM.
2735 */
t4_seeprom_wp(struct adapter * adapter,bool enable)2736 int t4_seeprom_wp(struct adapter *adapter, bool enable)
2737 {
2738 unsigned int v = enable ? 0xc : 0;
2739 int ret = pci_write_vpd(adapter->pdev, EEPROM_STAT_ADDR, 4, &v);
2740 return ret < 0 ? ret : 0;
2741 }
2742
2743 /**
2744 * t4_get_raw_vpd_params - read VPD parameters from VPD EEPROM
2745 * @adapter: adapter to read
2746 * @p: where to store the parameters
2747 *
2748 * Reads card parameters stored in VPD EEPROM.
2749 */
t4_get_raw_vpd_params(struct adapter * adapter,struct vpd_params * p)2750 int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
2751 {
2752 int i, ret = 0, addr;
2753 int ec, sn, pn, na;
2754 u8 *vpd, csum;
2755 unsigned int vpdr_len, kw_offset, id_len;
2756
2757 vpd = vmalloc(VPD_LEN);
2758 if (!vpd)
2759 return -ENOMEM;
2760
2761 /* Card information normally starts at VPD_BASE but early cards had
2762 * it at 0.
2763 */
2764 ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd);
2765 if (ret < 0)
2766 goto out;
2767
2768 /* The VPD shall have a unique identifier specified by the PCI SIG.
2769 * For chelsio adapters, the identifier is 0x82. The first byte of a VPD
2770 * shall be CHELSIO_VPD_UNIQUE_ID (0x82). The VPD programming software
2771 * is expected to automatically put this entry at the
2772 * beginning of the VPD.
2773 */
2774 addr = *vpd == CHELSIO_VPD_UNIQUE_ID ? VPD_BASE : VPD_BASE_OLD;
2775
2776 ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd);
2777 if (ret < 0)
2778 goto out;
2779
2780 if (vpd[0] != PCI_VPD_LRDT_ID_STRING) {
2781 dev_err(adapter->pdev_dev, "missing VPD ID string\n");
2782 ret = -EINVAL;
2783 goto out;
2784 }
2785
2786 id_len = pci_vpd_lrdt_size(vpd);
2787 if (id_len > ID_LEN)
2788 id_len = ID_LEN;
2789
2790 i = pci_vpd_find_tag(vpd, 0, VPD_LEN, PCI_VPD_LRDT_RO_DATA);
2791 if (i < 0) {
2792 dev_err(adapter->pdev_dev, "missing VPD-R section\n");
2793 ret = -EINVAL;
2794 goto out;
2795 }
2796
2797 vpdr_len = pci_vpd_lrdt_size(&vpd[i]);
2798 kw_offset = i + PCI_VPD_LRDT_TAG_SIZE;
2799 if (vpdr_len + kw_offset > VPD_LEN) {
2800 dev_err(adapter->pdev_dev, "bad VPD-R length %u\n", vpdr_len);
2801 ret = -EINVAL;
2802 goto out;
2803 }
2804
2805 #define FIND_VPD_KW(var, name) do { \
2806 var = pci_vpd_find_info_keyword(vpd, kw_offset, vpdr_len, name); \
2807 if (var < 0) { \
2808 dev_err(adapter->pdev_dev, "missing VPD keyword " name "\n"); \
2809 ret = -EINVAL; \
2810 goto out; \
2811 } \
2812 var += PCI_VPD_INFO_FLD_HDR_SIZE; \
2813 } while (0)
2814
2815 FIND_VPD_KW(i, "RV");
2816 for (csum = 0; i >= 0; i--)
2817 csum += vpd[i];
2818
2819 if (csum) {
2820 dev_err(adapter->pdev_dev,
2821 "corrupted VPD EEPROM, actual csum %u\n", csum);
2822 ret = -EINVAL;
2823 goto out;
2824 }
2825
2826 FIND_VPD_KW(ec, "EC");
2827 FIND_VPD_KW(sn, "SN");
2828 FIND_VPD_KW(pn, "PN");
2829 FIND_VPD_KW(na, "NA");
2830 #undef FIND_VPD_KW
2831
2832 memcpy(p->id, vpd + PCI_VPD_LRDT_TAG_SIZE, id_len);
2833 strim(p->id);
2834 memcpy(p->ec, vpd + ec, EC_LEN);
2835 strim(p->ec);
2836 i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE);
2837 memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN));
2838 strim(p->sn);
2839 i = pci_vpd_info_field_size(vpd + pn - PCI_VPD_INFO_FLD_HDR_SIZE);
2840 memcpy(p->pn, vpd + pn, min(i, PN_LEN));
2841 strim(p->pn);
2842 memcpy(p->na, vpd + na, min(i, MACADDR_LEN));
2843 strim((char *)p->na);
2844
2845 out:
2846 vfree(vpd);
2847 return ret < 0 ? ret : 0;
2848 }
2849
2850 /**
2851 * t4_get_vpd_params - read VPD parameters & retrieve Core Clock
2852 * @adapter: adapter to read
2853 * @p: where to store the parameters
2854 *
2855 * Reads card parameters stored in VPD EEPROM and retrieves the Core
2856 * Clock. This can only be called after a connection to the firmware
2857 * is established.
2858 */
t4_get_vpd_params(struct adapter * adapter,struct vpd_params * p)2859 int t4_get_vpd_params(struct adapter *adapter, struct vpd_params *p)
2860 {
2861 u32 cclk_param, cclk_val;
2862 int ret;
2863
2864 /* Grab the raw VPD parameters.
2865 */
2866 ret = t4_get_raw_vpd_params(adapter, p);
2867 if (ret)
2868 return ret;
2869
2870 /* Ask firmware for the Core Clock since it knows how to translate the
2871 * Reference Clock ('V2') VPD field into a Core Clock value ...
2872 */
2873 cclk_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
2874 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CCLK));
2875 ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
2876 1, &cclk_param, &cclk_val);
2877
2878 if (ret)
2879 return ret;
2880 p->cclk = cclk_val;
2881
2882 return 0;
2883 }
2884
2885 /**
2886 * t4_get_pfres - retrieve VF resource limits
2887 * @adapter: the adapter
2888 *
2889 * Retrieves configured resource limits and capabilities for a physical
2890 * function. The results are stored in @adapter->pfres.
2891 */
t4_get_pfres(struct adapter * adapter)2892 int t4_get_pfres(struct adapter *adapter)
2893 {
2894 struct pf_resources *pfres = &adapter->params.pfres;
2895 struct fw_pfvf_cmd cmd, rpl;
2896 int v;
2897 u32 word;
2898
2899 /* Execute PFVF Read command to get VF resource limits; bail out early
2900 * with error on command failure.
2901 */
2902 memset(&cmd, 0, sizeof(cmd));
2903 cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PFVF_CMD) |
2904 FW_CMD_REQUEST_F |
2905 FW_CMD_READ_F |
2906 FW_PFVF_CMD_PFN_V(adapter->pf) |
2907 FW_PFVF_CMD_VFN_V(0));
2908 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
2909 v = t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &rpl);
2910 if (v != FW_SUCCESS)
2911 return v;
2912
2913 /* Extract PF resource limits and return success.
2914 */
2915 word = be32_to_cpu(rpl.niqflint_niq);
2916 pfres->niqflint = FW_PFVF_CMD_NIQFLINT_G(word);
2917 pfres->niq = FW_PFVF_CMD_NIQ_G(word);
2918
2919 word = be32_to_cpu(rpl.type_to_neq);
2920 pfres->neq = FW_PFVF_CMD_NEQ_G(word);
2921 pfres->pmask = FW_PFVF_CMD_PMASK_G(word);
2922
2923 word = be32_to_cpu(rpl.tc_to_nexactf);
2924 pfres->tc = FW_PFVF_CMD_TC_G(word);
2925 pfres->nvi = FW_PFVF_CMD_NVI_G(word);
2926 pfres->nexactf = FW_PFVF_CMD_NEXACTF_G(word);
2927
2928 word = be32_to_cpu(rpl.r_caps_to_nethctrl);
2929 pfres->r_caps = FW_PFVF_CMD_R_CAPS_G(word);
2930 pfres->wx_caps = FW_PFVF_CMD_WX_CAPS_G(word);
2931 pfres->nethctrl = FW_PFVF_CMD_NETHCTRL_G(word);
2932
2933 return 0;
2934 }
2935
2936 /* serial flash and firmware constants */
2937 enum {
2938 SF_ATTEMPTS = 10, /* max retries for SF operations */
2939
2940 /* flash command opcodes */
2941 SF_PROG_PAGE = 2, /* program page */
2942 SF_WR_DISABLE = 4, /* disable writes */
2943 SF_RD_STATUS = 5, /* read status register */
2944 SF_WR_ENABLE = 6, /* enable writes */
2945 SF_RD_DATA_FAST = 0xb, /* read flash */
2946 SF_RD_ID = 0x9f, /* read ID */
2947 SF_ERASE_SECTOR = 0xd8, /* erase sector */
2948 };
2949
2950 /**
2951 * sf1_read - read data from the serial flash
2952 * @adapter: the adapter
2953 * @byte_cnt: number of bytes to read
2954 * @cont: whether another operation will be chained
2955 * @lock: whether to lock SF for PL access only
2956 * @valp: where to store the read data
2957 *
2958 * Reads up to 4 bytes of data from the serial flash. The location of
2959 * the read needs to be specified prior to calling this by issuing the
2960 * appropriate commands to the serial flash.
2961 */
sf1_read(struct adapter * adapter,unsigned int byte_cnt,int cont,int lock,u32 * valp)2962 static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont,
2963 int lock, u32 *valp)
2964 {
2965 int ret;
2966
2967 if (!byte_cnt || byte_cnt > 4)
2968 return -EINVAL;
2969 if (t4_read_reg(adapter, SF_OP_A) & SF_BUSY_F)
2970 return -EBUSY;
2971 t4_write_reg(adapter, SF_OP_A, SF_LOCK_V(lock) |
2972 SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1));
2973 ret = t4_wait_op_done(adapter, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 5);
2974 if (!ret)
2975 *valp = t4_read_reg(adapter, SF_DATA_A);
2976 return ret;
2977 }
2978
2979 /**
2980 * sf1_write - write data to the serial flash
2981 * @adapter: the adapter
2982 * @byte_cnt: number of bytes to write
2983 * @cont: whether another operation will be chained
2984 * @lock: whether to lock SF for PL access only
2985 * @val: value to write
2986 *
2987 * Writes up to 4 bytes of data to the serial flash. The location of
2988 * the write needs to be specified prior to calling this by issuing the
2989 * appropriate commands to the serial flash.
2990 */
sf1_write(struct adapter * adapter,unsigned int byte_cnt,int cont,int lock,u32 val)2991 static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont,
2992 int lock, u32 val)
2993 {
2994 if (!byte_cnt || byte_cnt > 4)
2995 return -EINVAL;
2996 if (t4_read_reg(adapter, SF_OP_A) & SF_BUSY_F)
2997 return -EBUSY;
2998 t4_write_reg(adapter, SF_DATA_A, val);
2999 t4_write_reg(adapter, SF_OP_A, SF_LOCK_V(lock) |
3000 SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1) | OP_V(1));
3001 return t4_wait_op_done(adapter, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 5);
3002 }
3003
3004 /**
3005 * flash_wait_op - wait for a flash operation to complete
3006 * @adapter: the adapter
3007 * @attempts: max number of polls of the status register
3008 * @delay: delay between polls in ms
3009 *
3010 * Wait for a flash operation to complete by polling the status register.
3011 */
flash_wait_op(struct adapter * adapter,int attempts,int delay)3012 static int flash_wait_op(struct adapter *adapter, int attempts, int delay)
3013 {
3014 int ret;
3015 u32 status;
3016
3017 while (1) {
3018 if ((ret = sf1_write(adapter, 1, 1, 1, SF_RD_STATUS)) != 0 ||
3019 (ret = sf1_read(adapter, 1, 0, 1, &status)) != 0)
3020 return ret;
3021 if (!(status & 1))
3022 return 0;
3023 if (--attempts == 0)
3024 return -EAGAIN;
3025 if (delay)
3026 msleep(delay);
3027 }
3028 }
3029
3030 /**
3031 * t4_read_flash - read words from serial flash
3032 * @adapter: the adapter
3033 * @addr: the start address for the read
3034 * @nwords: how many 32-bit words to read
3035 * @data: where to store the read data
3036 * @byte_oriented: whether to store data as bytes or as words
3037 *
3038 * Read the specified number of 32-bit words from the serial flash.
3039 * If @byte_oriented is set the read data is stored as a byte array
3040 * (i.e., big-endian), otherwise as 32-bit words in the platform's
3041 * natural endianness.
3042 */
t4_read_flash(struct adapter * adapter,unsigned int addr,unsigned int nwords,u32 * data,int byte_oriented)3043 int t4_read_flash(struct adapter *adapter, unsigned int addr,
3044 unsigned int nwords, u32 *data, int byte_oriented)
3045 {
3046 int ret;
3047
3048 if (addr + nwords * sizeof(u32) > adapter->params.sf_size || (addr & 3))
3049 return -EINVAL;
3050
3051 addr = swab32(addr) | SF_RD_DATA_FAST;
3052
3053 if ((ret = sf1_write(adapter, 4, 1, 0, addr)) != 0 ||
3054 (ret = sf1_read(adapter, 1, 1, 0, data)) != 0)
3055 return ret;
3056
3057 for ( ; nwords; nwords--, data++) {
3058 ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data);
3059 if (nwords == 1)
3060 t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */
3061 if (ret)
3062 return ret;
3063 if (byte_oriented)
3064 *data = (__force __u32)(cpu_to_be32(*data));
3065 }
3066 return 0;
3067 }
3068
3069 /**
3070 * t4_write_flash - write up to a page of data to the serial flash
3071 * @adapter: the adapter
3072 * @addr: the start address to write
3073 * @n: length of data to write in bytes
3074 * @data: the data to write
3075 *
3076 * Writes up to a page of data (256 bytes) to the serial flash starting
3077 * at the given address. All the data must be written to the same page.
3078 */
t4_write_flash(struct adapter * adapter,unsigned int addr,unsigned int n,const u8 * data)3079 static int t4_write_flash(struct adapter *adapter, unsigned int addr,
3080 unsigned int n, const u8 *data)
3081 {
3082 int ret;
3083 u32 buf[64];
3084 unsigned int i, c, left, val, offset = addr & 0xff;
3085
3086 if (addr >= adapter->params.sf_size || offset + n > SF_PAGE_SIZE)
3087 return -EINVAL;
3088
3089 val = swab32(addr) | SF_PROG_PAGE;
3090
3091 if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 ||
3092 (ret = sf1_write(adapter, 4, 1, 1, val)) != 0)
3093 goto unlock;
3094
3095 for (left = n; left; left -= c) {
3096 c = min(left, 4U);
3097 for (val = 0, i = 0; i < c; ++i)
3098 val = (val << 8) + *data++;
3099
3100 ret = sf1_write(adapter, c, c != left, 1, val);
3101 if (ret)
3102 goto unlock;
3103 }
3104 ret = flash_wait_op(adapter, 8, 1);
3105 if (ret)
3106 goto unlock;
3107
3108 t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */
3109
3110 /* Read the page to verify the write succeeded */
3111 ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1);
3112 if (ret)
3113 return ret;
3114
3115 if (memcmp(data - n, (u8 *)buf + offset, n)) {
3116 dev_err(adapter->pdev_dev,
3117 "failed to correctly write the flash page at %#x\n",
3118 addr);
3119 return -EIO;
3120 }
3121 return 0;
3122
3123 unlock:
3124 t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */
3125 return ret;
3126 }
3127
3128 /**
3129 * t4_get_fw_version - read the firmware version
3130 * @adapter: the adapter
3131 * @vers: where to place the version
3132 *
3133 * Reads the FW version from flash.
3134 */
t4_get_fw_version(struct adapter * adapter,u32 * vers)3135 int t4_get_fw_version(struct adapter *adapter, u32 *vers)
3136 {
3137 return t4_read_flash(adapter, FLASH_FW_START +
3138 offsetof(struct fw_hdr, fw_ver), 1,
3139 vers, 0);
3140 }
3141
3142 /**
3143 * t4_get_bs_version - read the firmware bootstrap version
3144 * @adapter: the adapter
3145 * @vers: where to place the version
3146 *
3147 * Reads the FW Bootstrap version from flash.
3148 */
t4_get_bs_version(struct adapter * adapter,u32 * vers)3149 int t4_get_bs_version(struct adapter *adapter, u32 *vers)
3150 {
3151 return t4_read_flash(adapter, FLASH_FWBOOTSTRAP_START +
3152 offsetof(struct fw_hdr, fw_ver), 1,
3153 vers, 0);
3154 }
3155
3156 /**
3157 * t4_get_tp_version - read the TP microcode version
3158 * @adapter: the adapter
3159 * @vers: where to place the version
3160 *
3161 * Reads the TP microcode version from flash.
3162 */
t4_get_tp_version(struct adapter * adapter,u32 * vers)3163 int t4_get_tp_version(struct adapter *adapter, u32 *vers)
3164 {
3165 return t4_read_flash(adapter, FLASH_FW_START +
3166 offsetof(struct fw_hdr, tp_microcode_ver),
3167 1, vers, 0);
3168 }
3169
3170 /**
3171 * t4_get_exprom_version - return the Expansion ROM version (if any)
3172 * @adapter: the adapter
3173 * @vers: where to place the version
3174 *
3175 * Reads the Expansion ROM header from FLASH and returns the version
3176 * number (if present) through the @vers return value pointer. We return
3177 * this in the Firmware Version Format since it's convenient. Return
3178 * 0 on success, -ENOENT if no Expansion ROM is present.
3179 */
t4_get_exprom_version(struct adapter * adap,u32 * vers)3180 int t4_get_exprom_version(struct adapter *adap, u32 *vers)
3181 {
3182 struct exprom_header {
3183 unsigned char hdr_arr[16]; /* must start with 0x55aa */
3184 unsigned char hdr_ver[4]; /* Expansion ROM version */
3185 } *hdr;
3186 u32 exprom_header_buf[DIV_ROUND_UP(sizeof(struct exprom_header),
3187 sizeof(u32))];
3188 int ret;
3189
3190 ret = t4_read_flash(adap, FLASH_EXP_ROM_START,
3191 ARRAY_SIZE(exprom_header_buf), exprom_header_buf,
3192 0);
3193 if (ret)
3194 return ret;
3195
3196 hdr = (struct exprom_header *)exprom_header_buf;
3197 if (hdr->hdr_arr[0] != 0x55 || hdr->hdr_arr[1] != 0xaa)
3198 return -ENOENT;
3199
3200 *vers = (FW_HDR_FW_VER_MAJOR_V(hdr->hdr_ver[0]) |
3201 FW_HDR_FW_VER_MINOR_V(hdr->hdr_ver[1]) |
3202 FW_HDR_FW_VER_MICRO_V(hdr->hdr_ver[2]) |
3203 FW_HDR_FW_VER_BUILD_V(hdr->hdr_ver[3]));
3204 return 0;
3205 }
3206
3207 /**
3208 * t4_get_vpd_version - return the VPD version
3209 * @adapter: the adapter
3210 * @vers: where to place the version
3211 *
3212 * Reads the VPD via the Firmware interface (thus this can only be called
3213 * once we're ready to issue Firmware commands). The format of the
3214 * VPD version is adapter specific. Returns 0 on success, an error on
3215 * failure.
3216 *
3217 * Note that early versions of the Firmware didn't include the ability
3218 * to retrieve the VPD version, so we zero-out the return-value parameter
3219 * in that case to avoid leaving it with garbage in it.
3220 *
3221 * Also note that the Firmware will return its cached copy of the VPD
3222 * Revision ID, not the actual Revision ID as written in the Serial
3223 * EEPROM. This is only an issue if a new VPD has been written and the
3224 * Firmware/Chip haven't yet gone through a RESET sequence. So it's best
3225 * to defer calling this routine till after a FW_RESET_CMD has been issued
3226 * if the Host Driver will be performing a full adapter initialization.
3227 */
t4_get_vpd_version(struct adapter * adapter,u32 * vers)3228 int t4_get_vpd_version(struct adapter *adapter, u32 *vers)
3229 {
3230 u32 vpdrev_param;
3231 int ret;
3232
3233 vpdrev_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3234 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_VPDREV));
3235 ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
3236 1, &vpdrev_param, vers);
3237 if (ret)
3238 *vers = 0;
3239 return ret;
3240 }
3241
3242 /**
3243 * t4_get_scfg_version - return the Serial Configuration version
3244 * @adapter: the adapter
3245 * @vers: where to place the version
3246 *
3247 * Reads the Serial Configuration Version via the Firmware interface
3248 * (thus this can only be called once we're ready to issue Firmware
3249 * commands). The format of the Serial Configuration version is
3250 * adapter specific. Returns 0 on success, an error on failure.
3251 *
3252 * Note that early versions of the Firmware didn't include the ability
3253 * to retrieve the Serial Configuration version, so we zero-out the
3254 * return-value parameter in that case to avoid leaving it with
3255 * garbage in it.
3256 *
3257 * Also note that the Firmware will return its cached copy of the Serial
3258 * Initialization Revision ID, not the actual Revision ID as written in
3259 * the Serial EEPROM. This is only an issue if a new VPD has been written
3260 * and the Firmware/Chip haven't yet gone through a RESET sequence. So
3261 * it's best to defer calling this routine till after a FW_RESET_CMD has
3262 * been issued if the Host Driver will be performing a full adapter
3263 * initialization.
3264 */
t4_get_scfg_version(struct adapter * adapter,u32 * vers)3265 int t4_get_scfg_version(struct adapter *adapter, u32 *vers)
3266 {
3267 u32 scfgrev_param;
3268 int ret;
3269
3270 scfgrev_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3271 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_SCFGREV));
3272 ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
3273 1, &scfgrev_param, vers);
3274 if (ret)
3275 *vers = 0;
3276 return ret;
3277 }
3278
3279 /**
3280 * t4_get_version_info - extract various chip/firmware version information
3281 * @adapter: the adapter
3282 *
3283 * Reads various chip/firmware version numbers and stores them into the
3284 * adapter Adapter Parameters structure. If any of the efforts fails
3285 * the first failure will be returned, but all of the version numbers
3286 * will be read.
3287 */
t4_get_version_info(struct adapter * adapter)3288 int t4_get_version_info(struct adapter *adapter)
3289 {
3290 int ret = 0;
3291
3292 #define FIRST_RET(__getvinfo) \
3293 do { \
3294 int __ret = __getvinfo; \
3295 if (__ret && !ret) \
3296 ret = __ret; \
3297 } while (0)
3298
3299 FIRST_RET(t4_get_fw_version(adapter, &adapter->params.fw_vers));
3300 FIRST_RET(t4_get_bs_version(adapter, &adapter->params.bs_vers));
3301 FIRST_RET(t4_get_tp_version(adapter, &adapter->params.tp_vers));
3302 FIRST_RET(t4_get_exprom_version(adapter, &adapter->params.er_vers));
3303 FIRST_RET(t4_get_scfg_version(adapter, &adapter->params.scfg_vers));
3304 FIRST_RET(t4_get_vpd_version(adapter, &adapter->params.vpd_vers));
3305
3306 #undef FIRST_RET
3307 return ret;
3308 }
3309
3310 /**
3311 * t4_dump_version_info - dump all of the adapter configuration IDs
3312 * @adapter: the adapter
3313 *
3314 * Dumps all of the various bits of adapter configuration version/revision
3315 * IDs information. This is typically called at some point after
3316 * t4_get_version_info() has been called.
3317 */
t4_dump_version_info(struct adapter * adapter)3318 void t4_dump_version_info(struct adapter *adapter)
3319 {
3320 /* Device information */
3321 dev_info(adapter->pdev_dev, "Chelsio %s rev %d\n",
3322 adapter->params.vpd.id,
3323 CHELSIO_CHIP_RELEASE(adapter->params.chip));
3324 dev_info(adapter->pdev_dev, "S/N: %s, P/N: %s\n",
3325 adapter->params.vpd.sn, adapter->params.vpd.pn);
3326
3327 /* Firmware Version */
3328 if (!adapter->params.fw_vers)
3329 dev_warn(adapter->pdev_dev, "No firmware loaded\n");
3330 else
3331 dev_info(adapter->pdev_dev, "Firmware version: %u.%u.%u.%u\n",
3332 FW_HDR_FW_VER_MAJOR_G(adapter->params.fw_vers),
3333 FW_HDR_FW_VER_MINOR_G(adapter->params.fw_vers),
3334 FW_HDR_FW_VER_MICRO_G(adapter->params.fw_vers),
3335 FW_HDR_FW_VER_BUILD_G(adapter->params.fw_vers));
3336
3337 /* Bootstrap Firmware Version. (Some adapters don't have Bootstrap
3338 * Firmware, so dev_info() is more appropriate here.)
3339 */
3340 if (!adapter->params.bs_vers)
3341 dev_info(adapter->pdev_dev, "No bootstrap loaded\n");
3342 else
3343 dev_info(adapter->pdev_dev, "Bootstrap version: %u.%u.%u.%u\n",
3344 FW_HDR_FW_VER_MAJOR_G(adapter->params.bs_vers),
3345 FW_HDR_FW_VER_MINOR_G(adapter->params.bs_vers),
3346 FW_HDR_FW_VER_MICRO_G(adapter->params.bs_vers),
3347 FW_HDR_FW_VER_BUILD_G(adapter->params.bs_vers));
3348
3349 /* TP Microcode Version */
3350 if (!adapter->params.tp_vers)
3351 dev_warn(adapter->pdev_dev, "No TP Microcode loaded\n");
3352 else
3353 dev_info(adapter->pdev_dev,
3354 "TP Microcode version: %u.%u.%u.%u\n",
3355 FW_HDR_FW_VER_MAJOR_G(adapter->params.tp_vers),
3356 FW_HDR_FW_VER_MINOR_G(adapter->params.tp_vers),
3357 FW_HDR_FW_VER_MICRO_G(adapter->params.tp_vers),
3358 FW_HDR_FW_VER_BUILD_G(adapter->params.tp_vers));
3359
3360 /* Expansion ROM version */
3361 if (!adapter->params.er_vers)
3362 dev_info(adapter->pdev_dev, "No Expansion ROM loaded\n");
3363 else
3364 dev_info(adapter->pdev_dev,
3365 "Expansion ROM version: %u.%u.%u.%u\n",
3366 FW_HDR_FW_VER_MAJOR_G(adapter->params.er_vers),
3367 FW_HDR_FW_VER_MINOR_G(adapter->params.er_vers),
3368 FW_HDR_FW_VER_MICRO_G(adapter->params.er_vers),
3369 FW_HDR_FW_VER_BUILD_G(adapter->params.er_vers));
3370
3371 /* Serial Configuration version */
3372 dev_info(adapter->pdev_dev, "Serial Configuration version: %#x\n",
3373 adapter->params.scfg_vers);
3374
3375 /* VPD Version */
3376 dev_info(adapter->pdev_dev, "VPD version: %#x\n",
3377 adapter->params.vpd_vers);
3378 }
3379
3380 /**
3381 * t4_check_fw_version - check if the FW is supported with this driver
3382 * @adap: the adapter
3383 *
3384 * Checks if an adapter's FW is compatible with the driver. Returns 0
3385 * if there's exact match, a negative error if the version could not be
3386 * read or there's a major version mismatch
3387 */
t4_check_fw_version(struct adapter * adap)3388 int t4_check_fw_version(struct adapter *adap)
3389 {
3390 int i, ret, major, minor, micro;
3391 int exp_major, exp_minor, exp_micro;
3392 unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
3393
3394 ret = t4_get_fw_version(adap, &adap->params.fw_vers);
3395 /* Try multiple times before returning error */
3396 for (i = 0; (ret == -EBUSY || ret == -EAGAIN) && i < 3; i++)
3397 ret = t4_get_fw_version(adap, &adap->params.fw_vers);
3398
3399 if (ret)
3400 return ret;
3401
3402 major = FW_HDR_FW_VER_MAJOR_G(adap->params.fw_vers);
3403 minor = FW_HDR_FW_VER_MINOR_G(adap->params.fw_vers);
3404 micro = FW_HDR_FW_VER_MICRO_G(adap->params.fw_vers);
3405
3406 switch (chip_version) {
3407 case CHELSIO_T4:
3408 exp_major = T4FW_MIN_VERSION_MAJOR;
3409 exp_minor = T4FW_MIN_VERSION_MINOR;
3410 exp_micro = T4FW_MIN_VERSION_MICRO;
3411 break;
3412 case CHELSIO_T5:
3413 exp_major = T5FW_MIN_VERSION_MAJOR;
3414 exp_minor = T5FW_MIN_VERSION_MINOR;
3415 exp_micro = T5FW_MIN_VERSION_MICRO;
3416 break;
3417 case CHELSIO_T6:
3418 exp_major = T6FW_MIN_VERSION_MAJOR;
3419 exp_minor = T6FW_MIN_VERSION_MINOR;
3420 exp_micro = T6FW_MIN_VERSION_MICRO;
3421 break;
3422 default:
3423 dev_err(adap->pdev_dev, "Unsupported chip type, %x\n",
3424 adap->chip);
3425 return -EINVAL;
3426 }
3427
3428 if (major < exp_major || (major == exp_major && minor < exp_minor) ||
3429 (major == exp_major && minor == exp_minor && micro < exp_micro)) {
3430 dev_err(adap->pdev_dev,
3431 "Card has firmware version %u.%u.%u, minimum "
3432 "supported firmware is %u.%u.%u.\n", major, minor,
3433 micro, exp_major, exp_minor, exp_micro);
3434 return -EFAULT;
3435 }
3436 return 0;
3437 }
3438
3439 /* Is the given firmware API compatible with the one the driver was compiled
3440 * with?
3441 */
fw_compatible(const struct fw_hdr * hdr1,const struct fw_hdr * hdr2)3442 static int fw_compatible(const struct fw_hdr *hdr1, const struct fw_hdr *hdr2)
3443 {
3444
3445 /* short circuit if it's the exact same firmware version */
3446 if (hdr1->chip == hdr2->chip && hdr1->fw_ver == hdr2->fw_ver)
3447 return 1;
3448
3449 #define SAME_INTF(x) (hdr1->intfver_##x == hdr2->intfver_##x)
3450 if (hdr1->chip == hdr2->chip && SAME_INTF(nic) && SAME_INTF(vnic) &&
3451 SAME_INTF(ri) && SAME_INTF(iscsi) && SAME_INTF(fcoe))
3452 return 1;
3453 #undef SAME_INTF
3454
3455 return 0;
3456 }
3457
3458 /* The firmware in the filesystem is usable, but should it be installed?
3459 * This routine explains itself in detail if it indicates the filesystem
3460 * firmware should be installed.
3461 */
should_install_fs_fw(struct adapter * adap,int card_fw_usable,int k,int c)3462 static int should_install_fs_fw(struct adapter *adap, int card_fw_usable,
3463 int k, int c)
3464 {
3465 const char *reason;
3466
3467 if (!card_fw_usable) {
3468 reason = "incompatible or unusable";
3469 goto install;
3470 }
3471
3472 if (k > c) {
3473 reason = "older than the version supported with this driver";
3474 goto install;
3475 }
3476
3477 return 0;
3478
3479 install:
3480 dev_err(adap->pdev_dev, "firmware on card (%u.%u.%u.%u) is %s, "
3481 "installing firmware %u.%u.%u.%u on card.\n",
3482 FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c),
3483 FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), reason,
3484 FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
3485 FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));
3486
3487 return 1;
3488 }
3489
t4_prep_fw(struct adapter * adap,struct fw_info * fw_info,const u8 * fw_data,unsigned int fw_size,struct fw_hdr * card_fw,enum dev_state state,int * reset)3490 int t4_prep_fw(struct adapter *adap, struct fw_info *fw_info,
3491 const u8 *fw_data, unsigned int fw_size,
3492 struct fw_hdr *card_fw, enum dev_state state,
3493 int *reset)
3494 {
3495 int ret, card_fw_usable, fs_fw_usable;
3496 const struct fw_hdr *fs_fw;
3497 const struct fw_hdr *drv_fw;
3498
3499 drv_fw = &fw_info->fw_hdr;
3500
3501 /* Read the header of the firmware on the card */
3502 ret = -t4_read_flash(adap, FLASH_FW_START,
3503 sizeof(*card_fw) / sizeof(uint32_t),
3504 (uint32_t *)card_fw, 1);
3505 if (ret == 0) {
3506 card_fw_usable = fw_compatible(drv_fw, (const void *)card_fw);
3507 } else {
3508 dev_err(adap->pdev_dev,
3509 "Unable to read card's firmware header: %d\n", ret);
3510 card_fw_usable = 0;
3511 }
3512
3513 if (fw_data != NULL) {
3514 fs_fw = (const void *)fw_data;
3515 fs_fw_usable = fw_compatible(drv_fw, fs_fw);
3516 } else {
3517 fs_fw = NULL;
3518 fs_fw_usable = 0;
3519 }
3520
3521 if (card_fw_usable && card_fw->fw_ver == drv_fw->fw_ver &&
3522 (!fs_fw_usable || fs_fw->fw_ver == drv_fw->fw_ver)) {
3523 /* Common case: the firmware on the card is an exact match and
3524 * the filesystem one is an exact match too, or the filesystem
3525 * one is absent/incompatible.
3526 */
3527 } else if (fs_fw_usable && state == DEV_STATE_UNINIT &&
3528 should_install_fs_fw(adap, card_fw_usable,
3529 be32_to_cpu(fs_fw->fw_ver),
3530 be32_to_cpu(card_fw->fw_ver))) {
3531 ret = -t4_fw_upgrade(adap, adap->mbox, fw_data,
3532 fw_size, 0);
3533 if (ret != 0) {
3534 dev_err(adap->pdev_dev,
3535 "failed to install firmware: %d\n", ret);
3536 goto bye;
3537 }
3538
3539 /* Installed successfully, update the cached header too. */
3540 *card_fw = *fs_fw;
3541 card_fw_usable = 1;
3542 *reset = 0; /* already reset as part of load_fw */
3543 }
3544
3545 if (!card_fw_usable) {
3546 uint32_t d, c, k;
3547
3548 d = be32_to_cpu(drv_fw->fw_ver);
3549 c = be32_to_cpu(card_fw->fw_ver);
3550 k = fs_fw ? be32_to_cpu(fs_fw->fw_ver) : 0;
3551
3552 dev_err(adap->pdev_dev, "Cannot find a usable firmware: "
3553 "chip state %d, "
3554 "driver compiled with %d.%d.%d.%d, "
3555 "card has %d.%d.%d.%d, filesystem has %d.%d.%d.%d\n",
3556 state,
3557 FW_HDR_FW_VER_MAJOR_G(d), FW_HDR_FW_VER_MINOR_G(d),
3558 FW_HDR_FW_VER_MICRO_G(d), FW_HDR_FW_VER_BUILD_G(d),
3559 FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c),
3560 FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c),
3561 FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
3562 FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));
3563 ret = EINVAL;
3564 goto bye;
3565 }
3566
3567 /* We're using whatever's on the card and it's known to be good. */
3568 adap->params.fw_vers = be32_to_cpu(card_fw->fw_ver);
3569 adap->params.tp_vers = be32_to_cpu(card_fw->tp_microcode_ver);
3570
3571 bye:
3572 return ret;
3573 }
3574
3575 /**
3576 * t4_flash_erase_sectors - erase a range of flash sectors
3577 * @adapter: the adapter
3578 * @start: the first sector to erase
3579 * @end: the last sector to erase
3580 *
3581 * Erases the sectors in the given inclusive range.
3582 */
t4_flash_erase_sectors(struct adapter * adapter,int start,int end)3583 static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end)
3584 {
3585 int ret = 0;
3586
3587 if (end >= adapter->params.sf_nsec)
3588 return -EINVAL;
3589
3590 while (start <= end) {
3591 if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 ||
3592 (ret = sf1_write(adapter, 4, 0, 1,
3593 SF_ERASE_SECTOR | (start << 8))) != 0 ||
3594 (ret = flash_wait_op(adapter, 14, 500)) != 0) {
3595 dev_err(adapter->pdev_dev,
3596 "erase of flash sector %d failed, error %d\n",
3597 start, ret);
3598 break;
3599 }
3600 start++;
3601 }
3602 t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */
3603 return ret;
3604 }
3605
3606 /**
3607 * t4_flash_cfg_addr - return the address of the flash configuration file
3608 * @adapter: the adapter
3609 *
3610 * Return the address within the flash where the Firmware Configuration
3611 * File is stored.
3612 */
t4_flash_cfg_addr(struct adapter * adapter)3613 unsigned int t4_flash_cfg_addr(struct adapter *adapter)
3614 {
3615 if (adapter->params.sf_size == 0x100000)
3616 return FLASH_FPGA_CFG_START;
3617 else
3618 return FLASH_CFG_START;
3619 }
3620
3621 /* Return TRUE if the specified firmware matches the adapter. I.e. T4
3622 * firmware for T4 adapters, T5 firmware for T5 adapters, etc. We go ahead
3623 * and emit an error message for mismatched firmware to save our caller the
3624 * effort ...
3625 */
t4_fw_matches_chip(const struct adapter * adap,const struct fw_hdr * hdr)3626 static bool t4_fw_matches_chip(const struct adapter *adap,
3627 const struct fw_hdr *hdr)
3628 {
3629 /* The expression below will return FALSE for any unsupported adapter
3630 * which will keep us "honest" in the future ...
3631 */
3632 if ((is_t4(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T4) ||
3633 (is_t5(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T5) ||
3634 (is_t6(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T6))
3635 return true;
3636
3637 dev_err(adap->pdev_dev,
3638 "FW image (%d) is not suitable for this adapter (%d)\n",
3639 hdr->chip, CHELSIO_CHIP_VERSION(adap->params.chip));
3640 return false;
3641 }
3642
3643 /**
3644 * t4_load_fw - download firmware
3645 * @adap: the adapter
3646 * @fw_data: the firmware image to write
3647 * @size: image size
3648 *
3649 * Write the supplied firmware image to the card's serial flash.
3650 */
t4_load_fw(struct adapter * adap,const u8 * fw_data,unsigned int size)3651 int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size)
3652 {
3653 u32 csum;
3654 int ret, addr;
3655 unsigned int i;
3656 u8 first_page[SF_PAGE_SIZE];
3657 const __be32 *p = (const __be32 *)fw_data;
3658 const struct fw_hdr *hdr = (const struct fw_hdr *)fw_data;
3659 unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
3660 unsigned int fw_start_sec = FLASH_FW_START_SEC;
3661 unsigned int fw_size = FLASH_FW_MAX_SIZE;
3662 unsigned int fw_start = FLASH_FW_START;
3663
3664 if (!size) {
3665 dev_err(adap->pdev_dev, "FW image has no data\n");
3666 return -EINVAL;
3667 }
3668 if (size & 511) {
3669 dev_err(adap->pdev_dev,
3670 "FW image size not multiple of 512 bytes\n");
3671 return -EINVAL;
3672 }
3673 if ((unsigned int)be16_to_cpu(hdr->len512) * 512 != size) {
3674 dev_err(adap->pdev_dev,
3675 "FW image size differs from size in FW header\n");
3676 return -EINVAL;
3677 }
3678 if (size > fw_size) {
3679 dev_err(adap->pdev_dev, "FW image too large, max is %u bytes\n",
3680 fw_size);
3681 return -EFBIG;
3682 }
3683 if (!t4_fw_matches_chip(adap, hdr))
3684 return -EINVAL;
3685
3686 for (csum = 0, i = 0; i < size / sizeof(csum); i++)
3687 csum += be32_to_cpu(p[i]);
3688
3689 if (csum != 0xffffffff) {
3690 dev_err(adap->pdev_dev,
3691 "corrupted firmware image, checksum %#x\n", csum);
3692 return -EINVAL;
3693 }
3694
3695 i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */
3696 ret = t4_flash_erase_sectors(adap, fw_start_sec, fw_start_sec + i - 1);
3697 if (ret)
3698 goto out;
3699
3700 /*
3701 * We write the correct version at the end so the driver can see a bad
3702 * version if the FW write fails. Start by writing a copy of the
3703 * first page with a bad version.
3704 */
3705 memcpy(first_page, fw_data, SF_PAGE_SIZE);
3706 ((struct fw_hdr *)first_page)->fw_ver = cpu_to_be32(0xffffffff);
3707 ret = t4_write_flash(adap, fw_start, SF_PAGE_SIZE, first_page);
3708 if (ret)
3709 goto out;
3710
3711 addr = fw_start;
3712 for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
3713 addr += SF_PAGE_SIZE;
3714 fw_data += SF_PAGE_SIZE;
3715 ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data);
3716 if (ret)
3717 goto out;
3718 }
3719
3720 ret = t4_write_flash(adap,
3721 fw_start + offsetof(struct fw_hdr, fw_ver),
3722 sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver);
3723 out:
3724 if (ret)
3725 dev_err(adap->pdev_dev, "firmware download failed, error %d\n",
3726 ret);
3727 else
3728 ret = t4_get_fw_version(adap, &adap->params.fw_vers);
3729 return ret;
3730 }
3731
3732 /**
3733 * t4_phy_fw_ver - return current PHY firmware version
3734 * @adap: the adapter
3735 * @phy_fw_ver: return value buffer for PHY firmware version
3736 *
3737 * Returns the current version of external PHY firmware on the
3738 * adapter.
3739 */
t4_phy_fw_ver(struct adapter * adap,int * phy_fw_ver)3740 int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver)
3741 {
3742 u32 param, val;
3743 int ret;
3744
3745 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3746 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) |
3747 FW_PARAMS_PARAM_Y_V(adap->params.portvec) |
3748 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_VERSION));
3749 ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
3750 ¶m, &val);
3751 if (ret < 0)
3752 return ret;
3753 *phy_fw_ver = val;
3754 return 0;
3755 }
3756
3757 /**
3758 * t4_load_phy_fw - download port PHY firmware
3759 * @adap: the adapter
3760 * @win: the PCI-E Memory Window index to use for t4_memory_rw()
3761 * @win_lock: the lock to use to guard the memory copy
3762 * @phy_fw_version: function to check PHY firmware versions
3763 * @phy_fw_data: the PHY firmware image to write
3764 * @phy_fw_size: image size
3765 *
3766 * Transfer the specified PHY firmware to the adapter. If a non-NULL
3767 * @phy_fw_version is supplied, then it will be used to determine if
3768 * it's necessary to perform the transfer by comparing the version
3769 * of any existing adapter PHY firmware with that of the passed in
3770 * PHY firmware image. If @win_lock is non-NULL then it will be used
3771 * around the call to t4_memory_rw() which transfers the PHY firmware
3772 * to the adapter.
3773 *
3774 * A negative error number will be returned if an error occurs. If
3775 * version number support is available and there's no need to upgrade
3776 * the firmware, 0 will be returned. If firmware is successfully
3777 * transferred to the adapter, 1 will be retured.
3778 *
3779 * NOTE: some adapters only have local RAM to store the PHY firmware. As
3780 * a result, a RESET of the adapter would cause that RAM to lose its
3781 * contents. Thus, loading PHY firmware on such adapters must happen
3782 * after any FW_RESET_CMDs ...
3783 */
t4_load_phy_fw(struct adapter * adap,int win,spinlock_t * win_lock,int (* phy_fw_version)(const u8 *,size_t),const u8 * phy_fw_data,size_t phy_fw_size)3784 int t4_load_phy_fw(struct adapter *adap,
3785 int win, spinlock_t *win_lock,
3786 int (*phy_fw_version)(const u8 *, size_t),
3787 const u8 *phy_fw_data, size_t phy_fw_size)
3788 {
3789 unsigned long mtype = 0, maddr = 0;
3790 u32 param, val;
3791 int cur_phy_fw_ver = 0, new_phy_fw_vers = 0;
3792 int ret;
3793
3794 /* If we have version number support, then check to see if the adapter
3795 * already has up-to-date PHY firmware loaded.
3796 */
3797 if (phy_fw_version) {
3798 new_phy_fw_vers = phy_fw_version(phy_fw_data, phy_fw_size);
3799 ret = t4_phy_fw_ver(adap, &cur_phy_fw_ver);
3800 if (ret < 0)
3801 return ret;
3802
3803 if (cur_phy_fw_ver >= new_phy_fw_vers) {
3804 CH_WARN(adap, "PHY Firmware already up-to-date, "
3805 "version %#x\n", cur_phy_fw_ver);
3806 return 0;
3807 }
3808 }
3809
3810 /* Ask the firmware where it wants us to copy the PHY firmware image.
3811 * The size of the file requires a special version of the READ coommand
3812 * which will pass the file size via the values field in PARAMS_CMD and
3813 * retrieve the return value from firmware and place it in the same
3814 * buffer values
3815 */
3816 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3817 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) |
3818 FW_PARAMS_PARAM_Y_V(adap->params.portvec) |
3819 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD));
3820 val = phy_fw_size;
3821 ret = t4_query_params_rw(adap, adap->mbox, adap->pf, 0, 1,
3822 ¶m, &val, 1, true);
3823 if (ret < 0)
3824 return ret;
3825 mtype = val >> 8;
3826 maddr = (val & 0xff) << 16;
3827
3828 /* Copy the supplied PHY Firmware image to the adapter memory location
3829 * allocated by the adapter firmware.
3830 */
3831 if (win_lock)
3832 spin_lock_bh(win_lock);
3833 ret = t4_memory_rw(adap, win, mtype, maddr,
3834 phy_fw_size, (__be32 *)phy_fw_data,
3835 T4_MEMORY_WRITE);
3836 if (win_lock)
3837 spin_unlock_bh(win_lock);
3838 if (ret)
3839 return ret;
3840
3841 /* Tell the firmware that the PHY firmware image has been written to
3842 * RAM and it can now start copying it over to the PHYs. The chip
3843 * firmware will RESET the affected PHYs as part of this operation
3844 * leaving them running the new PHY firmware image.
3845 */
3846 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3847 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) |
3848 FW_PARAMS_PARAM_Y_V(adap->params.portvec) |
3849 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD));
3850 ret = t4_set_params_timeout(adap, adap->mbox, adap->pf, 0, 1,
3851 ¶m, &val, 30000);
3852
3853 /* If we have version number support, then check to see that the new
3854 * firmware got loaded properly.
3855 */
3856 if (phy_fw_version) {
3857 ret = t4_phy_fw_ver(adap, &cur_phy_fw_ver);
3858 if (ret < 0)
3859 return ret;
3860
3861 if (cur_phy_fw_ver != new_phy_fw_vers) {
3862 CH_WARN(adap, "PHY Firmware did not update: "
3863 "version on adapter %#x, "
3864 "version flashed %#x\n",
3865 cur_phy_fw_ver, new_phy_fw_vers);
3866 return -ENXIO;
3867 }
3868 }
3869
3870 return 1;
3871 }
3872
3873 /**
3874 * t4_fwcache - firmware cache operation
3875 * @adap: the adapter
3876 * @op : the operation (flush or flush and invalidate)
3877 */
t4_fwcache(struct adapter * adap,enum fw_params_param_dev_fwcache op)3878 int t4_fwcache(struct adapter *adap, enum fw_params_param_dev_fwcache op)
3879 {
3880 struct fw_params_cmd c;
3881
3882 memset(&c, 0, sizeof(c));
3883 c.op_to_vfn =
3884 cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) |
3885 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
3886 FW_PARAMS_CMD_PFN_V(adap->pf) |
3887 FW_PARAMS_CMD_VFN_V(0));
3888 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
3889 c.param[0].mnem =
3890 cpu_to_be32(FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3891 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FWCACHE));
3892 c.param[0].val = (__force __be32)op;
3893
3894 return t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), NULL);
3895 }
3896
t4_cim_read_pif_la(struct adapter * adap,u32 * pif_req,u32 * pif_rsp,unsigned int * pif_req_wrptr,unsigned int * pif_rsp_wrptr)3897 void t4_cim_read_pif_la(struct adapter *adap, u32 *pif_req, u32 *pif_rsp,
3898 unsigned int *pif_req_wrptr,
3899 unsigned int *pif_rsp_wrptr)
3900 {
3901 int i, j;
3902 u32 cfg, val, req, rsp;
3903
3904 cfg = t4_read_reg(adap, CIM_DEBUGCFG_A);
3905 if (cfg & LADBGEN_F)
3906 t4_write_reg(adap, CIM_DEBUGCFG_A, cfg ^ LADBGEN_F);
3907
3908 val = t4_read_reg(adap, CIM_DEBUGSTS_A);
3909 req = POLADBGWRPTR_G(val);
3910 rsp = PILADBGWRPTR_G(val);
3911 if (pif_req_wrptr)
3912 *pif_req_wrptr = req;
3913 if (pif_rsp_wrptr)
3914 *pif_rsp_wrptr = rsp;
3915
3916 for (i = 0; i < CIM_PIFLA_SIZE; i++) {
3917 for (j = 0; j < 6; j++) {
3918 t4_write_reg(adap, CIM_DEBUGCFG_A, POLADBGRDPTR_V(req) |
3919 PILADBGRDPTR_V(rsp));
3920 *pif_req++ = t4_read_reg(adap, CIM_PO_LA_DEBUGDATA_A);
3921 *pif_rsp++ = t4_read_reg(adap, CIM_PI_LA_DEBUGDATA_A);
3922 req++;
3923 rsp++;
3924 }
3925 req = (req + 2) & POLADBGRDPTR_M;
3926 rsp = (rsp + 2) & PILADBGRDPTR_M;
3927 }
3928 t4_write_reg(adap, CIM_DEBUGCFG_A, cfg);
3929 }
3930
t4_cim_read_ma_la(struct adapter * adap,u32 * ma_req,u32 * ma_rsp)3931 void t4_cim_read_ma_la(struct adapter *adap, u32 *ma_req, u32 *ma_rsp)
3932 {
3933 u32 cfg;
3934 int i, j, idx;
3935
3936 cfg = t4_read_reg(adap, CIM_DEBUGCFG_A);
3937 if (cfg & LADBGEN_F)
3938 t4_write_reg(adap, CIM_DEBUGCFG_A, cfg ^ LADBGEN_F);
3939
3940 for (i = 0; i < CIM_MALA_SIZE; i++) {
3941 for (j = 0; j < 5; j++) {
3942 idx = 8 * i + j;
3943 t4_write_reg(adap, CIM_DEBUGCFG_A, POLADBGRDPTR_V(idx) |
3944 PILADBGRDPTR_V(idx));
3945 *ma_req++ = t4_read_reg(adap, CIM_PO_LA_MADEBUGDATA_A);
3946 *ma_rsp++ = t4_read_reg(adap, CIM_PI_LA_MADEBUGDATA_A);
3947 }
3948 }
3949 t4_write_reg(adap, CIM_DEBUGCFG_A, cfg);
3950 }
3951
t4_ulprx_read_la(struct adapter * adap,u32 * la_buf)3952 void t4_ulprx_read_la(struct adapter *adap, u32 *la_buf)
3953 {
3954 unsigned int i, j;
3955
3956 for (i = 0; i < 8; i++) {
3957 u32 *p = la_buf + i;
3958
3959 t4_write_reg(adap, ULP_RX_LA_CTL_A, i);
3960 j = t4_read_reg(adap, ULP_RX_LA_WRPTR_A);
3961 t4_write_reg(adap, ULP_RX_LA_RDPTR_A, j);
3962 for (j = 0; j < ULPRX_LA_SIZE; j++, p += 8)
3963 *p = t4_read_reg(adap, ULP_RX_LA_RDDATA_A);
3964 }
3965 }
3966
3967 #define ADVERT_MASK (FW_PORT_CAP32_SPEED_V(FW_PORT_CAP32_SPEED_M) | \
3968 FW_PORT_CAP32_ANEG)
3969
3970 /**
3971 * fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits
3972 * @caps16: a 16-bit Port Capabilities value
3973 *
3974 * Returns the equivalent 32-bit Port Capabilities value.
3975 */
fwcaps16_to_caps32(fw_port_cap16_t caps16)3976 static fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16)
3977 {
3978 fw_port_cap32_t caps32 = 0;
3979
3980 #define CAP16_TO_CAP32(__cap) \
3981 do { \
3982 if (caps16 & FW_PORT_CAP_##__cap) \
3983 caps32 |= FW_PORT_CAP32_##__cap; \
3984 } while (0)
3985
3986 CAP16_TO_CAP32(SPEED_100M);
3987 CAP16_TO_CAP32(SPEED_1G);
3988 CAP16_TO_CAP32(SPEED_25G);
3989 CAP16_TO_CAP32(SPEED_10G);
3990 CAP16_TO_CAP32(SPEED_40G);
3991 CAP16_TO_CAP32(SPEED_100G);
3992 CAP16_TO_CAP32(FC_RX);
3993 CAP16_TO_CAP32(FC_TX);
3994 CAP16_TO_CAP32(ANEG);
3995 CAP16_TO_CAP32(FORCE_PAUSE);
3996 CAP16_TO_CAP32(MDIAUTO);
3997 CAP16_TO_CAP32(MDISTRAIGHT);
3998 CAP16_TO_CAP32(FEC_RS);
3999 CAP16_TO_CAP32(FEC_BASER_RS);
4000 CAP16_TO_CAP32(802_3_PAUSE);
4001 CAP16_TO_CAP32(802_3_ASM_DIR);
4002
4003 #undef CAP16_TO_CAP32
4004
4005 return caps32;
4006 }
4007
4008 /**
4009 * fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits
4010 * @caps32: a 32-bit Port Capabilities value
4011 *
4012 * Returns the equivalent 16-bit Port Capabilities value. Note that
4013 * not all 32-bit Port Capabilities can be represented in the 16-bit
4014 * Port Capabilities and some fields/values may not make it.
4015 */
fwcaps32_to_caps16(fw_port_cap32_t caps32)4016 static fw_port_cap16_t fwcaps32_to_caps16(fw_port_cap32_t caps32)
4017 {
4018 fw_port_cap16_t caps16 = 0;
4019
4020 #define CAP32_TO_CAP16(__cap) \
4021 do { \
4022 if (caps32 & FW_PORT_CAP32_##__cap) \
4023 caps16 |= FW_PORT_CAP_##__cap; \
4024 } while (0)
4025
4026 CAP32_TO_CAP16(SPEED_100M);
4027 CAP32_TO_CAP16(SPEED_1G);
4028 CAP32_TO_CAP16(SPEED_10G);
4029 CAP32_TO_CAP16(SPEED_25G);
4030 CAP32_TO_CAP16(SPEED_40G);
4031 CAP32_TO_CAP16(SPEED_100G);
4032 CAP32_TO_CAP16(FC_RX);
4033 CAP32_TO_CAP16(FC_TX);
4034 CAP32_TO_CAP16(802_3_PAUSE);
4035 CAP32_TO_CAP16(802_3_ASM_DIR);
4036 CAP32_TO_CAP16(ANEG);
4037 CAP32_TO_CAP16(FORCE_PAUSE);
4038 CAP32_TO_CAP16(MDIAUTO);
4039 CAP32_TO_CAP16(MDISTRAIGHT);
4040 CAP32_TO_CAP16(FEC_RS);
4041 CAP32_TO_CAP16(FEC_BASER_RS);
4042
4043 #undef CAP32_TO_CAP16
4044
4045 return caps16;
4046 }
4047
4048 /* Translate Firmware Port Capabilities Pause specification to Common Code */
fwcap_to_cc_pause(fw_port_cap32_t fw_pause)4049 static inline enum cc_pause fwcap_to_cc_pause(fw_port_cap32_t fw_pause)
4050 {
4051 enum cc_pause cc_pause = 0;
4052
4053 if (fw_pause & FW_PORT_CAP32_FC_RX)
4054 cc_pause |= PAUSE_RX;
4055 if (fw_pause & FW_PORT_CAP32_FC_TX)
4056 cc_pause |= PAUSE_TX;
4057
4058 return cc_pause;
4059 }
4060
4061 /* Translate Common Code Pause specification into Firmware Port Capabilities */
cc_to_fwcap_pause(enum cc_pause cc_pause)4062 static inline fw_port_cap32_t cc_to_fwcap_pause(enum cc_pause cc_pause)
4063 {
4064 fw_port_cap32_t fw_pause = 0;
4065
4066 if (cc_pause & PAUSE_RX)
4067 fw_pause |= FW_PORT_CAP32_FC_RX;
4068 if (cc_pause & PAUSE_TX)
4069 fw_pause |= FW_PORT_CAP32_FC_TX;
4070 if (!(cc_pause & PAUSE_AUTONEG))
4071 fw_pause |= FW_PORT_CAP32_FORCE_PAUSE;
4072
4073 return fw_pause;
4074 }
4075
4076 /* Translate Firmware Forward Error Correction specification to Common Code */
fwcap_to_cc_fec(fw_port_cap32_t fw_fec)4077 static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec)
4078 {
4079 enum cc_fec cc_fec = 0;
4080
4081 if (fw_fec & FW_PORT_CAP32_FEC_RS)
4082 cc_fec |= FEC_RS;
4083 if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS)
4084 cc_fec |= FEC_BASER_RS;
4085
4086 return cc_fec;
4087 }
4088
4089 /* Translate Common Code Forward Error Correction specification to Firmware */
cc_to_fwcap_fec(enum cc_fec cc_fec)4090 static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec)
4091 {
4092 fw_port_cap32_t fw_fec = 0;
4093
4094 if (cc_fec & FEC_RS)
4095 fw_fec |= FW_PORT_CAP32_FEC_RS;
4096 if (cc_fec & FEC_BASER_RS)
4097 fw_fec |= FW_PORT_CAP32_FEC_BASER_RS;
4098
4099 return fw_fec;
4100 }
4101
4102 /**
4103 * t4_link_l1cfg - apply link configuration to MAC/PHY
4104 * @adapter: the adapter
4105 * @mbox: the Firmware Mailbox to use
4106 * @port: the Port ID
4107 * @lc: the Port's Link Configuration
4108 *
4109 * Set up a port's MAC and PHY according to a desired link configuration.
4110 * - If the PHY can auto-negotiate first decide what to advertise, then
4111 * enable/disable auto-negotiation as desired, and reset.
4112 * - If the PHY does not auto-negotiate just reset it.
4113 * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
4114 * otherwise do it later based on the outcome of auto-negotiation.
4115 */
t4_link_l1cfg_core(struct adapter * adapter,unsigned int mbox,unsigned int port,struct link_config * lc,bool sleep_ok,int timeout)4116 int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
4117 unsigned int port, struct link_config *lc,
4118 bool sleep_ok, int timeout)
4119 {
4120 unsigned int fw_caps = adapter->params.fw_caps_support;
4121 fw_port_cap32_t fw_fc, cc_fec, fw_fec, rcap;
4122 struct fw_port_cmd cmd;
4123 unsigned int fw_mdi;
4124 int ret;
4125
4126 fw_mdi = (FW_PORT_CAP32_MDI_V(FW_PORT_CAP32_MDI_AUTO) & lc->pcaps);
4127 /* Convert driver coding of Pause Frame Flow Control settings into the
4128 * Firmware's API.
4129 */
4130 fw_fc = cc_to_fwcap_pause(lc->requested_fc);
4131
4132 /* Convert Common Code Forward Error Control settings into the
4133 * Firmware's API. If the current Requested FEC has "Automatic"
4134 * (IEEE 802.3) specified, then we use whatever the Firmware
4135 * sent us as part of it's IEEE 802.3-based interpratation of
4136 * the Transceiver Module EPROM FEC parameters. Otherwise we
4137 * use whatever is in the current Requested FEC settings.
4138 */
4139 if (lc->requested_fec & FEC_AUTO)
4140 cc_fec = fwcap_to_cc_fec(lc->def_acaps);
4141 else
4142 cc_fec = lc->requested_fec;
4143 fw_fec = cc_to_fwcap_fec(cc_fec);
4144
4145 /* Figure out what our Requested Port Capabilities are going to be.
4146 */
4147 if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) {
4148 rcap = lc->acaps | fw_fc | fw_fec;
4149 lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
4150 lc->fec = cc_fec;
4151 } else if (lc->autoneg == AUTONEG_DISABLE) {
4152 rcap = lc->speed_caps | fw_fc | fw_fec | fw_mdi;
4153 lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
4154 lc->fec = cc_fec;
4155 } else {
4156 rcap = lc->acaps | fw_fc | fw_fec | fw_mdi;
4157 }
4158
4159 /* Note that older Firmware doesn't have FW_PORT_CAP32_FORCE_PAUSE, so
4160 * we need to exclude this from this check in order to maintain
4161 * compatibility ...
4162 */
4163 if ((rcap & ~lc->pcaps) & ~FW_PORT_CAP32_FORCE_PAUSE) {
4164 dev_err(adapter->pdev_dev,
4165 "Requested Port Capabilities %#x exceed Physical Port Capabilities %#x\n",
4166 rcap, lc->pcaps);
4167 return -EINVAL;
4168 }
4169
4170 /* And send that on to the Firmware ...
4171 */
4172 memset(&cmd, 0, sizeof(cmd));
4173 cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
4174 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
4175 FW_PORT_CMD_PORTID_V(port));
4176 cmd.action_to_len16 =
4177 cpu_to_be32(FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
4178 ? FW_PORT_ACTION_L1_CFG
4179 : FW_PORT_ACTION_L1_CFG32) |
4180 FW_LEN16(cmd));
4181 if (fw_caps == FW_CAPS16)
4182 cmd.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap));
4183 else
4184 cmd.u.l1cfg32.rcap32 = cpu_to_be32(rcap);
4185
4186 ret = t4_wr_mbox_meat_timeout(adapter, mbox, &cmd, sizeof(cmd), NULL,
4187 sleep_ok, timeout);
4188 if (ret) {
4189 dev_err(adapter->pdev_dev,
4190 "Requested Port Capabilities %#x rejected, error %d\n",
4191 rcap, -ret);
4192 return ret;
4193 }
4194 return ret;
4195 }
4196
4197 /**
4198 * t4_restart_aneg - restart autonegotiation
4199 * @adap: the adapter
4200 * @mbox: mbox to use for the FW command
4201 * @port: the port id
4202 *
4203 * Restarts autonegotiation for the selected port.
4204 */
t4_restart_aneg(struct adapter * adap,unsigned int mbox,unsigned int port)4205 int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port)
4206 {
4207 struct fw_port_cmd c;
4208
4209 memset(&c, 0, sizeof(c));
4210 c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
4211 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
4212 FW_PORT_CMD_PORTID_V(port));
4213 c.action_to_len16 =
4214 cpu_to_be32(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_L1_CFG) |
4215 FW_LEN16(c));
4216 c.u.l1cfg.rcap = cpu_to_be32(FW_PORT_CAP32_ANEG);
4217 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
4218 }
4219
4220 typedef void (*int_handler_t)(struct adapter *adap);
4221
4222 struct intr_info {
4223 unsigned int mask; /* bits to check in interrupt status */
4224 const char *msg; /* message to print or NULL */
4225 short stat_idx; /* stat counter to increment or -1 */
4226 unsigned short fatal; /* whether the condition reported is fatal */
4227 int_handler_t int_handler; /* platform-specific int handler */
4228 };
4229
4230 /**
4231 * t4_handle_intr_status - table driven interrupt handler
4232 * @adapter: the adapter that generated the interrupt
4233 * @reg: the interrupt status register to process
4234 * @acts: table of interrupt actions
4235 *
4236 * A table driven interrupt handler that applies a set of masks to an
4237 * interrupt status word and performs the corresponding actions if the
4238 * interrupts described by the mask have occurred. The actions include
4239 * optionally emitting a warning or alert message. The table is terminated
4240 * by an entry specifying mask 0. Returns the number of fatal interrupt
4241 * conditions.
4242 */
t4_handle_intr_status(struct adapter * adapter,unsigned int reg,const struct intr_info * acts)4243 static int t4_handle_intr_status(struct adapter *adapter, unsigned int reg,
4244 const struct intr_info *acts)
4245 {
4246 int fatal = 0;
4247 unsigned int mask = 0;
4248 unsigned int status = t4_read_reg(adapter, reg);
4249
4250 for ( ; acts->mask; ++acts) {
4251 if (!(status & acts->mask))
4252 continue;
4253 if (acts->fatal) {
4254 fatal++;
4255 dev_alert(adapter->pdev_dev, "%s (0x%x)\n", acts->msg,
4256 status & acts->mask);
4257 } else if (acts->msg && printk_ratelimit())
4258 dev_warn(adapter->pdev_dev, "%s (0x%x)\n", acts->msg,
4259 status & acts->mask);
4260 if (acts->int_handler)
4261 acts->int_handler(adapter);
4262 mask |= acts->mask;
4263 }
4264 status &= mask;
4265 if (status) /* clear processed interrupts */
4266 t4_write_reg(adapter, reg, status);
4267 return fatal;
4268 }
4269
4270 /*
4271 * Interrupt handler for the PCIE module.
4272 */
pcie_intr_handler(struct adapter * adapter)4273 static void pcie_intr_handler(struct adapter *adapter)
4274 {
4275 static const struct intr_info sysbus_intr_info[] = {
4276 { RNPP_F, "RXNP array parity error", -1, 1 },
4277 { RPCP_F, "RXPC array parity error", -1, 1 },
4278 { RCIP_F, "RXCIF array parity error", -1, 1 },
4279 { RCCP_F, "Rx completions control array parity error", -1, 1 },
4280 { RFTP_F, "RXFT array parity error", -1, 1 },
4281 { 0 }
4282 };
4283 static const struct intr_info pcie_port_intr_info[] = {
4284 { TPCP_F, "TXPC array parity error", -1, 1 },
4285 { TNPP_F, "TXNP array parity error", -1, 1 },
4286 { TFTP_F, "TXFT array parity error", -1, 1 },
4287 { TCAP_F, "TXCA array parity error", -1, 1 },
4288 { TCIP_F, "TXCIF array parity error", -1, 1 },
4289 { RCAP_F, "RXCA array parity error", -1, 1 },
4290 { OTDD_F, "outbound request TLP discarded", -1, 1 },
4291 { RDPE_F, "Rx data parity error", -1, 1 },
4292 { TDUE_F, "Tx uncorrectable data error", -1, 1 },
4293 { 0 }
4294 };
4295 static const struct intr_info pcie_intr_info[] = {
4296 { MSIADDRLPERR_F, "MSI AddrL parity error", -1, 1 },
4297 { MSIADDRHPERR_F, "MSI AddrH parity error", -1, 1 },
4298 { MSIDATAPERR_F, "MSI data parity error", -1, 1 },
4299 { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 },
4300 { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 },
4301 { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 },
4302 { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 },
4303 { PIOCPLPERR_F, "PCI PIO completion FIFO parity error", -1, 1 },
4304 { PIOREQPERR_F, "PCI PIO request FIFO parity error", -1, 1 },
4305 { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 },
4306 { CCNTPERR_F, "PCI CMD channel count parity error", -1, 1 },
4307 { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 },
4308 { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 },
4309 { DCNTPERR_F, "PCI DMA channel count parity error", -1, 1 },
4310 { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 },
4311 { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 },
4312 { HCNTPERR_F, "PCI HMA channel count parity error", -1, 1 },
4313 { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 },
4314 { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 },
4315 { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 },
4316 { FIDPERR_F, "PCI FID parity error", -1, 1 },
4317 { INTXCLRPERR_F, "PCI INTx clear parity error", -1, 1 },
4318 { MATAGPERR_F, "PCI MA tag parity error", -1, 1 },
4319 { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 },
4320 { RXCPLPERR_F, "PCI Rx completion parity error", -1, 1 },
4321 { RXWRPERR_F, "PCI Rx write parity error", -1, 1 },
4322 { RPLPERR_F, "PCI replay buffer parity error", -1, 1 },
4323 { PCIESINT_F, "PCI core secondary fault", -1, 1 },
4324 { PCIEPINT_F, "PCI core primary fault", -1, 1 },
4325 { UNXSPLCPLERR_F, "PCI unexpected split completion error",
4326 -1, 0 },
4327 { 0 }
4328 };
4329
4330 static struct intr_info t5_pcie_intr_info[] = {
4331 { MSTGRPPERR_F, "Master Response Read Queue parity error",
4332 -1, 1 },
4333 { MSTTIMEOUTPERR_F, "Master Timeout FIFO parity error", -1, 1 },
4334 { MSIXSTIPERR_F, "MSI-X STI SRAM parity error", -1, 1 },
4335 { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 },
4336 { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 },
4337 { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 },
4338 { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 },
4339 { PIOCPLGRPPERR_F, "PCI PIO completion Group FIFO parity error",
4340 -1, 1 },
4341 { PIOREQGRPPERR_F, "PCI PIO request Group FIFO parity error",
4342 -1, 1 },
4343 { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 },
4344 { MSTTAGQPERR_F, "PCI master tag queue parity error", -1, 1 },
4345 { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 },
4346 { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 },
4347 { DREQWRPERR_F, "PCI DMA channel write request parity error",
4348 -1, 1 },
4349 { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 },
4350 { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 },
4351 { HREQWRPERR_F, "PCI HMA channel count parity error", -1, 1 },
4352 { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 },
4353 { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 },
4354 { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 },
4355 { FIDPERR_F, "PCI FID parity error", -1, 1 },
4356 { VFIDPERR_F, "PCI INTx clear parity error", -1, 1 },
4357 { MAGRPPERR_F, "PCI MA group FIFO parity error", -1, 1 },
4358 { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 },
4359 { IPRXHDRGRPPERR_F, "PCI IP Rx header group parity error",
4360 -1, 1 },
4361 { IPRXDATAGRPPERR_F, "PCI IP Rx data group parity error",
4362 -1, 1 },
4363 { RPLPERR_F, "PCI IP replay buffer parity error", -1, 1 },
4364 { IPSOTPERR_F, "PCI IP SOT buffer parity error", -1, 1 },
4365 { TRGT1GRPPERR_F, "PCI TRGT1 group FIFOs parity error", -1, 1 },
4366 { READRSPERR_F, "Outbound read error", -1, 0 },
4367 { 0 }
4368 };
4369
4370 int fat;
4371
4372 if (is_t4(adapter->params.chip))
4373 fat = t4_handle_intr_status(adapter,
4374 PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS_A,
4375 sysbus_intr_info) +
4376 t4_handle_intr_status(adapter,
4377 PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS_A,
4378 pcie_port_intr_info) +
4379 t4_handle_intr_status(adapter, PCIE_INT_CAUSE_A,
4380 pcie_intr_info);
4381 else
4382 fat = t4_handle_intr_status(adapter, PCIE_INT_CAUSE_A,
4383 t5_pcie_intr_info);
4384
4385 if (fat)
4386 t4_fatal_err(adapter);
4387 }
4388
4389 /*
4390 * TP interrupt handler.
4391 */
tp_intr_handler(struct adapter * adapter)4392 static void tp_intr_handler(struct adapter *adapter)
4393 {
4394 static const struct intr_info tp_intr_info[] = {
4395 { 0x3fffffff, "TP parity error", -1, 1 },
4396 { FLMTXFLSTEMPTY_F, "TP out of Tx pages", -1, 1 },
4397 { 0 }
4398 };
4399
4400 if (t4_handle_intr_status(adapter, TP_INT_CAUSE_A, tp_intr_info))
4401 t4_fatal_err(adapter);
4402 }
4403
4404 /*
4405 * SGE interrupt handler.
4406 */
sge_intr_handler(struct adapter * adapter)4407 static void sge_intr_handler(struct adapter *adapter)
4408 {
4409 u64 v;
4410 u32 err;
4411
4412 static const struct intr_info sge_intr_info[] = {
4413 { ERR_CPL_EXCEED_IQE_SIZE_F,
4414 "SGE received CPL exceeding IQE size", -1, 1 },
4415 { ERR_INVALID_CIDX_INC_F,
4416 "SGE GTS CIDX increment too large", -1, 0 },
4417 { ERR_CPL_OPCODE_0_F, "SGE received 0-length CPL", -1, 0 },
4418 { DBFIFO_LP_INT_F, NULL, -1, 0, t4_db_full },
4419 { ERR_DATA_CPL_ON_HIGH_QID1_F | ERR_DATA_CPL_ON_HIGH_QID0_F,
4420 "SGE IQID > 1023 received CPL for FL", -1, 0 },
4421 { ERR_BAD_DB_PIDX3_F, "SGE DBP 3 pidx increment too large", -1,
4422 0 },
4423 { ERR_BAD_DB_PIDX2_F, "SGE DBP 2 pidx increment too large", -1,
4424 0 },
4425 { ERR_BAD_DB_PIDX1_F, "SGE DBP 1 pidx increment too large", -1,
4426 0 },
4427 { ERR_BAD_DB_PIDX0_F, "SGE DBP 0 pidx increment too large", -1,
4428 0 },
4429 { ERR_ING_CTXT_PRIO_F,
4430 "SGE too many priority ingress contexts", -1, 0 },
4431 { INGRESS_SIZE_ERR_F, "SGE illegal ingress QID", -1, 0 },
4432 { EGRESS_SIZE_ERR_F, "SGE illegal egress QID", -1, 0 },
4433 { 0 }
4434 };
4435
4436 static struct intr_info t4t5_sge_intr_info[] = {
4437 { ERR_DROPPED_DB_F, NULL, -1, 0, t4_db_dropped },
4438 { DBFIFO_HP_INT_F, NULL, -1, 0, t4_db_full },
4439 { ERR_EGR_CTXT_PRIO_F,
4440 "SGE too many priority egress contexts", -1, 0 },
4441 { 0 }
4442 };
4443
4444 v = (u64)t4_read_reg(adapter, SGE_INT_CAUSE1_A) |
4445 ((u64)t4_read_reg(adapter, SGE_INT_CAUSE2_A) << 32);
4446 if (v) {
4447 dev_alert(adapter->pdev_dev, "SGE parity error (%#llx)\n",
4448 (unsigned long long)v);
4449 t4_write_reg(adapter, SGE_INT_CAUSE1_A, v);
4450 t4_write_reg(adapter, SGE_INT_CAUSE2_A, v >> 32);
4451 }
4452
4453 v |= t4_handle_intr_status(adapter, SGE_INT_CAUSE3_A, sge_intr_info);
4454 if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
4455 v |= t4_handle_intr_status(adapter, SGE_INT_CAUSE3_A,
4456 t4t5_sge_intr_info);
4457
4458 err = t4_read_reg(adapter, SGE_ERROR_STATS_A);
4459 if (err & ERROR_QID_VALID_F) {
4460 dev_err(adapter->pdev_dev, "SGE error for queue %u\n",
4461 ERROR_QID_G(err));
4462 if (err & UNCAPTURED_ERROR_F)
4463 dev_err(adapter->pdev_dev,
4464 "SGE UNCAPTURED_ERROR set (clearing)\n");
4465 t4_write_reg(adapter, SGE_ERROR_STATS_A, ERROR_QID_VALID_F |
4466 UNCAPTURED_ERROR_F);
4467 }
4468
4469 if (v != 0)
4470 t4_fatal_err(adapter);
4471 }
4472
4473 #define CIM_OBQ_INTR (OBQULP0PARERR_F | OBQULP1PARERR_F | OBQULP2PARERR_F |\
4474 OBQULP3PARERR_F | OBQSGEPARERR_F | OBQNCSIPARERR_F)
4475 #define CIM_IBQ_INTR (IBQTP0PARERR_F | IBQTP1PARERR_F | IBQULPPARERR_F |\
4476 IBQSGEHIPARERR_F | IBQSGELOPARERR_F | IBQNCSIPARERR_F)
4477
4478 /*
4479 * CIM interrupt handler.
4480 */
cim_intr_handler(struct adapter * adapter)4481 static void cim_intr_handler(struct adapter *adapter)
4482 {
4483 static const struct intr_info cim_intr_info[] = {
4484 { PREFDROPINT_F, "CIM control register prefetch drop", -1, 1 },
4485 { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 },
4486 { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 },
4487 { MBUPPARERR_F, "CIM mailbox uP parity error", -1, 1 },
4488 { MBHOSTPARERR_F, "CIM mailbox host parity error", -1, 1 },
4489 { TIEQINPARERRINT_F, "CIM TIEQ outgoing parity error", -1, 1 },
4490 { TIEQOUTPARERRINT_F, "CIM TIEQ incoming parity error", -1, 1 },
4491 { TIMER0INT_F, "CIM TIMER0 interrupt", -1, 1 },
4492 { 0 }
4493 };
4494 static const struct intr_info cim_upintr_info[] = {
4495 { RSVDSPACEINT_F, "CIM reserved space access", -1, 1 },
4496 { ILLTRANSINT_F, "CIM illegal transaction", -1, 1 },
4497 { ILLWRINT_F, "CIM illegal write", -1, 1 },
4498 { ILLRDINT_F, "CIM illegal read", -1, 1 },
4499 { ILLRDBEINT_F, "CIM illegal read BE", -1, 1 },
4500 { ILLWRBEINT_F, "CIM illegal write BE", -1, 1 },
4501 { SGLRDBOOTINT_F, "CIM single read from boot space", -1, 1 },
4502 { SGLWRBOOTINT_F, "CIM single write to boot space", -1, 1 },
4503 { BLKWRBOOTINT_F, "CIM block write to boot space", -1, 1 },
4504 { SGLRDFLASHINT_F, "CIM single read from flash space", -1, 1 },
4505 { SGLWRFLASHINT_F, "CIM single write to flash space", -1, 1 },
4506 { BLKWRFLASHINT_F, "CIM block write to flash space", -1, 1 },
4507 { SGLRDEEPROMINT_F, "CIM single EEPROM read", -1, 1 },
4508 { SGLWREEPROMINT_F, "CIM single EEPROM write", -1, 1 },
4509 { BLKRDEEPROMINT_F, "CIM block EEPROM read", -1, 1 },
4510 { BLKWREEPROMINT_F, "CIM block EEPROM write", -1, 1 },
4511 { SGLRDCTLINT_F, "CIM single read from CTL space", -1, 1 },
4512 { SGLWRCTLINT_F, "CIM single write to CTL space", -1, 1 },
4513 { BLKRDCTLINT_F, "CIM block read from CTL space", -1, 1 },
4514 { BLKWRCTLINT_F, "CIM block write to CTL space", -1, 1 },
4515 { SGLRDPLINT_F, "CIM single read from PL space", -1, 1 },
4516 { SGLWRPLINT_F, "CIM single write to PL space", -1, 1 },
4517 { BLKRDPLINT_F, "CIM block read from PL space", -1, 1 },
4518 { BLKWRPLINT_F, "CIM block write to PL space", -1, 1 },
4519 { REQOVRLOOKUPINT_F, "CIM request FIFO overwrite", -1, 1 },
4520 { RSPOVRLOOKUPINT_F, "CIM response FIFO overwrite", -1, 1 },
4521 { TIMEOUTINT_F, "CIM PIF timeout", -1, 1 },
4522 { TIMEOUTMAINT_F, "CIM PIF MA timeout", -1, 1 },
4523 { 0 }
4524 };
4525
4526 u32 val, fw_err;
4527 int fat;
4528
4529 fw_err = t4_read_reg(adapter, PCIE_FW_A);
4530 if (fw_err & PCIE_FW_ERR_F)
4531 t4_report_fw_error(adapter);
4532
4533 /* When the Firmware detects an internal error which normally
4534 * wouldn't raise a Host Interrupt, it forces a CIM Timer0 interrupt
4535 * in order to make sure the Host sees the Firmware Crash. So
4536 * if we have a Timer0 interrupt and don't see a Firmware Crash,
4537 * ignore the Timer0 interrupt.
4538 */
4539
4540 val = t4_read_reg(adapter, CIM_HOST_INT_CAUSE_A);
4541 if (val & TIMER0INT_F)
4542 if (!(fw_err & PCIE_FW_ERR_F) ||
4543 (PCIE_FW_EVAL_G(fw_err) != PCIE_FW_EVAL_CRASH))
4544 t4_write_reg(adapter, CIM_HOST_INT_CAUSE_A,
4545 TIMER0INT_F);
4546
4547 fat = t4_handle_intr_status(adapter, CIM_HOST_INT_CAUSE_A,
4548 cim_intr_info) +
4549 t4_handle_intr_status(adapter, CIM_HOST_UPACC_INT_CAUSE_A,
4550 cim_upintr_info);
4551 if (fat)
4552 t4_fatal_err(adapter);
4553 }
4554
4555 /*
4556 * ULP RX interrupt handler.
4557 */
ulprx_intr_handler(struct adapter * adapter)4558 static void ulprx_intr_handler(struct adapter *adapter)
4559 {
4560 static const struct intr_info ulprx_intr_info[] = {
4561 { 0x1800000, "ULPRX context error", -1, 1 },
4562 { 0x7fffff, "ULPRX parity error", -1, 1 },
4563 { 0 }
4564 };
4565
4566 if (t4_handle_intr_status(adapter, ULP_RX_INT_CAUSE_A, ulprx_intr_info))
4567 t4_fatal_err(adapter);
4568 }
4569
4570 /*
4571 * ULP TX interrupt handler.
4572 */
ulptx_intr_handler(struct adapter * adapter)4573 static void ulptx_intr_handler(struct adapter *adapter)
4574 {
4575 static const struct intr_info ulptx_intr_info[] = {
4576 { PBL_BOUND_ERR_CH3_F, "ULPTX channel 3 PBL out of bounds", -1,
4577 0 },
4578 { PBL_BOUND_ERR_CH2_F, "ULPTX channel 2 PBL out of bounds", -1,
4579 0 },
4580 { PBL_BOUND_ERR_CH1_F, "ULPTX channel 1 PBL out of bounds", -1,
4581 0 },
4582 { PBL_BOUND_ERR_CH0_F, "ULPTX channel 0 PBL out of bounds", -1,
4583 0 },
4584 { 0xfffffff, "ULPTX parity error", -1, 1 },
4585 { 0 }
4586 };
4587
4588 if (t4_handle_intr_status(adapter, ULP_TX_INT_CAUSE_A, ulptx_intr_info))
4589 t4_fatal_err(adapter);
4590 }
4591
4592 /*
4593 * PM TX interrupt handler.
4594 */
pmtx_intr_handler(struct adapter * adapter)4595 static void pmtx_intr_handler(struct adapter *adapter)
4596 {
4597 static const struct intr_info pmtx_intr_info[] = {
4598 { PCMD_LEN_OVFL0_F, "PMTX channel 0 pcmd too large", -1, 1 },
4599 { PCMD_LEN_OVFL1_F, "PMTX channel 1 pcmd too large", -1, 1 },
4600 { PCMD_LEN_OVFL2_F, "PMTX channel 2 pcmd too large", -1, 1 },
4601 { ZERO_C_CMD_ERROR_F, "PMTX 0-length pcmd", -1, 1 },
4602 { PMTX_FRAMING_ERROR_F, "PMTX framing error", -1, 1 },
4603 { OESPI_PAR_ERROR_F, "PMTX oespi parity error", -1, 1 },
4604 { DB_OPTIONS_PAR_ERROR_F, "PMTX db_options parity error",
4605 -1, 1 },
4606 { ICSPI_PAR_ERROR_F, "PMTX icspi parity error", -1, 1 },
4607 { PMTX_C_PCMD_PAR_ERROR_F, "PMTX c_pcmd parity error", -1, 1},
4608 { 0 }
4609 };
4610
4611 if (t4_handle_intr_status(adapter, PM_TX_INT_CAUSE_A, pmtx_intr_info))
4612 t4_fatal_err(adapter);
4613 }
4614
4615 /*
4616 * PM RX interrupt handler.
4617 */
pmrx_intr_handler(struct adapter * adapter)4618 static void pmrx_intr_handler(struct adapter *adapter)
4619 {
4620 static const struct intr_info pmrx_intr_info[] = {
4621 { ZERO_E_CMD_ERROR_F, "PMRX 0-length pcmd", -1, 1 },
4622 { PMRX_FRAMING_ERROR_F, "PMRX framing error", -1, 1 },
4623 { OCSPI_PAR_ERROR_F, "PMRX ocspi parity error", -1, 1 },
4624 { DB_OPTIONS_PAR_ERROR_F, "PMRX db_options parity error",
4625 -1, 1 },
4626 { IESPI_PAR_ERROR_F, "PMRX iespi parity error", -1, 1 },
4627 { PMRX_E_PCMD_PAR_ERROR_F, "PMRX e_pcmd parity error", -1, 1},
4628 { 0 }
4629 };
4630
4631 if (t4_handle_intr_status(adapter, PM_RX_INT_CAUSE_A, pmrx_intr_info))
4632 t4_fatal_err(adapter);
4633 }
4634
4635 /*
4636 * CPL switch interrupt handler.
4637 */
cplsw_intr_handler(struct adapter * adapter)4638 static void cplsw_intr_handler(struct adapter *adapter)
4639 {
4640 static const struct intr_info cplsw_intr_info[] = {
4641 { CIM_OP_MAP_PERR_F, "CPLSW CIM op_map parity error", -1, 1 },
4642 { CIM_OVFL_ERROR_F, "CPLSW CIM overflow", -1, 1 },
4643 { TP_FRAMING_ERROR_F, "CPLSW TP framing error", -1, 1 },
4644 { SGE_FRAMING_ERROR_F, "CPLSW SGE framing error", -1, 1 },
4645 { CIM_FRAMING_ERROR_F, "CPLSW CIM framing error", -1, 1 },
4646 { ZERO_SWITCH_ERROR_F, "CPLSW no-switch error", -1, 1 },
4647 { 0 }
4648 };
4649
4650 if (t4_handle_intr_status(adapter, CPL_INTR_CAUSE_A, cplsw_intr_info))
4651 t4_fatal_err(adapter);
4652 }
4653
4654 /*
4655 * LE interrupt handler.
4656 */
le_intr_handler(struct adapter * adap)4657 static void le_intr_handler(struct adapter *adap)
4658 {
4659 enum chip_type chip = CHELSIO_CHIP_VERSION(adap->params.chip);
4660 static const struct intr_info le_intr_info[] = {
4661 { LIPMISS_F, "LE LIP miss", -1, 0 },
4662 { LIP0_F, "LE 0 LIP error", -1, 0 },
4663 { PARITYERR_F, "LE parity error", -1, 1 },
4664 { UNKNOWNCMD_F, "LE unknown command", -1, 1 },
4665 { REQQPARERR_F, "LE request queue parity error", -1, 1 },
4666 { 0 }
4667 };
4668
4669 static struct intr_info t6_le_intr_info[] = {
4670 { T6_LIPMISS_F, "LE LIP miss", -1, 0 },
4671 { T6_LIP0_F, "LE 0 LIP error", -1, 0 },
4672 { TCAMINTPERR_F, "LE parity error", -1, 1 },
4673 { T6_UNKNOWNCMD_F, "LE unknown command", -1, 1 },
4674 { SSRAMINTPERR_F, "LE request queue parity error", -1, 1 },
4675 { 0 }
4676 };
4677
4678 if (t4_handle_intr_status(adap, LE_DB_INT_CAUSE_A,
4679 (chip <= CHELSIO_T5) ?
4680 le_intr_info : t6_le_intr_info))
4681 t4_fatal_err(adap);
4682 }
4683
4684 /*
4685 * MPS interrupt handler.
4686 */
mps_intr_handler(struct adapter * adapter)4687 static void mps_intr_handler(struct adapter *adapter)
4688 {
4689 static const struct intr_info mps_rx_intr_info[] = {
4690 { 0xffffff, "MPS Rx parity error", -1, 1 },
4691 { 0 }
4692 };
4693 static const struct intr_info mps_tx_intr_info[] = {
4694 { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 },
4695 { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 },
4696 { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error",
4697 -1, 1 },
4698 { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error",
4699 -1, 1 },
4700 { BUBBLE_F, "MPS Tx underflow", -1, 1 },
4701 { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 },
4702 { FRMERR_F, "MPS Tx framing error", -1, 1 },
4703 { 0 }
4704 };
4705 static const struct intr_info t6_mps_tx_intr_info[] = {
4706 { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 },
4707 { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 },
4708 { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error",
4709 -1, 1 },
4710 { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error",
4711 -1, 1 },
4712 /* MPS Tx Bubble is normal for T6 */
4713 { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 },
4714 { FRMERR_F, "MPS Tx framing error", -1, 1 },
4715 { 0 }
4716 };
4717 static const struct intr_info mps_trc_intr_info[] = {
4718 { FILTMEM_V(FILTMEM_M), "MPS TRC filter parity error", -1, 1 },
4719 { PKTFIFO_V(PKTFIFO_M), "MPS TRC packet FIFO parity error",
4720 -1, 1 },
4721 { MISCPERR_F, "MPS TRC misc parity error", -1, 1 },
4722 { 0 }
4723 };
4724 static const struct intr_info mps_stat_sram_intr_info[] = {
4725 { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 },
4726 { 0 }
4727 };
4728 static const struct intr_info mps_stat_tx_intr_info[] = {
4729 { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 },
4730 { 0 }
4731 };
4732 static const struct intr_info mps_stat_rx_intr_info[] = {
4733 { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 },
4734 { 0 }
4735 };
4736 static const struct intr_info mps_cls_intr_info[] = {
4737 { MATCHSRAM_F, "MPS match SRAM parity error", -1, 1 },
4738 { MATCHTCAM_F, "MPS match TCAM parity error", -1, 1 },
4739 { HASHSRAM_F, "MPS hash SRAM parity error", -1, 1 },
4740 { 0 }
4741 };
4742
4743 int fat;
4744
4745 fat = t4_handle_intr_status(adapter, MPS_RX_PERR_INT_CAUSE_A,
4746 mps_rx_intr_info) +
4747 t4_handle_intr_status(adapter, MPS_TX_INT_CAUSE_A,
4748 is_t6(adapter->params.chip)
4749 ? t6_mps_tx_intr_info
4750 : mps_tx_intr_info) +
4751 t4_handle_intr_status(adapter, MPS_TRC_INT_CAUSE_A,
4752 mps_trc_intr_info) +
4753 t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_SRAM_A,
4754 mps_stat_sram_intr_info) +
4755 t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_TX_FIFO_A,
4756 mps_stat_tx_intr_info) +
4757 t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_RX_FIFO_A,
4758 mps_stat_rx_intr_info) +
4759 t4_handle_intr_status(adapter, MPS_CLS_INT_CAUSE_A,
4760 mps_cls_intr_info);
4761
4762 t4_write_reg(adapter, MPS_INT_CAUSE_A, 0);
4763 t4_read_reg(adapter, MPS_INT_CAUSE_A); /* flush */
4764 if (fat)
4765 t4_fatal_err(adapter);
4766 }
4767
4768 #define MEM_INT_MASK (PERR_INT_CAUSE_F | ECC_CE_INT_CAUSE_F | \
4769 ECC_UE_INT_CAUSE_F)
4770
4771 /*
4772 * EDC/MC interrupt handler.
4773 */
mem_intr_handler(struct adapter * adapter,int idx)4774 static void mem_intr_handler(struct adapter *adapter, int idx)
4775 {
4776 static const char name[4][7] = { "EDC0", "EDC1", "MC/MC0", "MC1" };
4777
4778 unsigned int addr, cnt_addr, v;
4779
4780 if (idx <= MEM_EDC1) {
4781 addr = EDC_REG(EDC_INT_CAUSE_A, idx);
4782 cnt_addr = EDC_REG(EDC_ECC_STATUS_A, idx);
4783 } else if (idx == MEM_MC) {
4784 if (is_t4(adapter->params.chip)) {
4785 addr = MC_INT_CAUSE_A;
4786 cnt_addr = MC_ECC_STATUS_A;
4787 } else {
4788 addr = MC_P_INT_CAUSE_A;
4789 cnt_addr = MC_P_ECC_STATUS_A;
4790 }
4791 } else {
4792 addr = MC_REG(MC_P_INT_CAUSE_A, 1);
4793 cnt_addr = MC_REG(MC_P_ECC_STATUS_A, 1);
4794 }
4795
4796 v = t4_read_reg(adapter, addr) & MEM_INT_MASK;
4797 if (v & PERR_INT_CAUSE_F)
4798 dev_alert(adapter->pdev_dev, "%s FIFO parity error\n",
4799 name[idx]);
4800 if (v & ECC_CE_INT_CAUSE_F) {
4801 u32 cnt = ECC_CECNT_G(t4_read_reg(adapter, cnt_addr));
4802
4803 t4_edc_err_read(adapter, idx);
4804
4805 t4_write_reg(adapter, cnt_addr, ECC_CECNT_V(ECC_CECNT_M));
4806 if (printk_ratelimit())
4807 dev_warn(adapter->pdev_dev,
4808 "%u %s correctable ECC data error%s\n",
4809 cnt, name[idx], cnt > 1 ? "s" : "");
4810 }
4811 if (v & ECC_UE_INT_CAUSE_F)
4812 dev_alert(adapter->pdev_dev,
4813 "%s uncorrectable ECC data error\n", name[idx]);
4814
4815 t4_write_reg(adapter, addr, v);
4816 if (v & (PERR_INT_CAUSE_F | ECC_UE_INT_CAUSE_F))
4817 t4_fatal_err(adapter);
4818 }
4819
4820 /*
4821 * MA interrupt handler.
4822 */
ma_intr_handler(struct adapter * adap)4823 static void ma_intr_handler(struct adapter *adap)
4824 {
4825 u32 v, status = t4_read_reg(adap, MA_INT_CAUSE_A);
4826
4827 if (status & MEM_PERR_INT_CAUSE_F) {
4828 dev_alert(adap->pdev_dev,
4829 "MA parity error, parity status %#x\n",
4830 t4_read_reg(adap, MA_PARITY_ERROR_STATUS1_A));
4831 if (is_t5(adap->params.chip))
4832 dev_alert(adap->pdev_dev,
4833 "MA parity error, parity status %#x\n",
4834 t4_read_reg(adap,
4835 MA_PARITY_ERROR_STATUS2_A));
4836 }
4837 if (status & MEM_WRAP_INT_CAUSE_F) {
4838 v = t4_read_reg(adap, MA_INT_WRAP_STATUS_A);
4839 dev_alert(adap->pdev_dev, "MA address wrap-around error by "
4840 "client %u to address %#x\n",
4841 MEM_WRAP_CLIENT_NUM_G(v),
4842 MEM_WRAP_ADDRESS_G(v) << 4);
4843 }
4844 t4_write_reg(adap, MA_INT_CAUSE_A, status);
4845 t4_fatal_err(adap);
4846 }
4847
4848 /*
4849 * SMB interrupt handler.
4850 */
smb_intr_handler(struct adapter * adap)4851 static void smb_intr_handler(struct adapter *adap)
4852 {
4853 static const struct intr_info smb_intr_info[] = {
4854 { MSTTXFIFOPARINT_F, "SMB master Tx FIFO parity error", -1, 1 },
4855 { MSTRXFIFOPARINT_F, "SMB master Rx FIFO parity error", -1, 1 },
4856 { SLVFIFOPARINT_F, "SMB slave FIFO parity error", -1, 1 },
4857 { 0 }
4858 };
4859
4860 if (t4_handle_intr_status(adap, SMB_INT_CAUSE_A, smb_intr_info))
4861 t4_fatal_err(adap);
4862 }
4863
4864 /*
4865 * NC-SI interrupt handler.
4866 */
ncsi_intr_handler(struct adapter * adap)4867 static void ncsi_intr_handler(struct adapter *adap)
4868 {
4869 static const struct intr_info ncsi_intr_info[] = {
4870 { CIM_DM_PRTY_ERR_F, "NC-SI CIM parity error", -1, 1 },
4871 { MPS_DM_PRTY_ERR_F, "NC-SI MPS parity error", -1, 1 },
4872 { TXFIFO_PRTY_ERR_F, "NC-SI Tx FIFO parity error", -1, 1 },
4873 { RXFIFO_PRTY_ERR_F, "NC-SI Rx FIFO parity error", -1, 1 },
4874 { 0 }
4875 };
4876
4877 if (t4_handle_intr_status(adap, NCSI_INT_CAUSE_A, ncsi_intr_info))
4878 t4_fatal_err(adap);
4879 }
4880
4881 /*
4882 * XGMAC interrupt handler.
4883 */
xgmac_intr_handler(struct adapter * adap,int port)4884 static void xgmac_intr_handler(struct adapter *adap, int port)
4885 {
4886 u32 v, int_cause_reg;
4887
4888 if (is_t4(adap->params.chip))
4889 int_cause_reg = PORT_REG(port, XGMAC_PORT_INT_CAUSE_A);
4890 else
4891 int_cause_reg = T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A);
4892
4893 v = t4_read_reg(adap, int_cause_reg);
4894
4895 v &= TXFIFO_PRTY_ERR_F | RXFIFO_PRTY_ERR_F;
4896 if (!v)
4897 return;
4898
4899 if (v & TXFIFO_PRTY_ERR_F)
4900 dev_alert(adap->pdev_dev, "XGMAC %d Tx FIFO parity error\n",
4901 port);
4902 if (v & RXFIFO_PRTY_ERR_F)
4903 dev_alert(adap->pdev_dev, "XGMAC %d Rx FIFO parity error\n",
4904 port);
4905 t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_INT_CAUSE_A), v);
4906 t4_fatal_err(adap);
4907 }
4908
4909 /*
4910 * PL interrupt handler.
4911 */
pl_intr_handler(struct adapter * adap)4912 static void pl_intr_handler(struct adapter *adap)
4913 {
4914 static const struct intr_info pl_intr_info[] = {
4915 { FATALPERR_F, "T4 fatal parity error", -1, 1 },
4916 { PERRVFID_F, "PL VFID_MAP parity error", -1, 1 },
4917 { 0 }
4918 };
4919
4920 if (t4_handle_intr_status(adap, PL_PL_INT_CAUSE_A, pl_intr_info))
4921 t4_fatal_err(adap);
4922 }
4923
4924 #define PF_INTR_MASK (PFSW_F)
4925 #define GLBL_INTR_MASK (CIM_F | MPS_F | PL_F | PCIE_F | MC_F | EDC0_F | \
4926 EDC1_F | LE_F | TP_F | MA_F | PM_TX_F | PM_RX_F | ULP_RX_F | \
4927 CPL_SWITCH_F | SGE_F | ULP_TX_F | SF_F)
4928
4929 /**
4930 * t4_slow_intr_handler - control path interrupt handler
4931 * @adapter: the adapter
4932 *
4933 * T4 interrupt handler for non-data global interrupt events, e.g., errors.
4934 * The designation 'slow' is because it involves register reads, while
4935 * data interrupts typically don't involve any MMIOs.
4936 */
t4_slow_intr_handler(struct adapter * adapter)4937 int t4_slow_intr_handler(struct adapter *adapter)
4938 {
4939 u32 cause = t4_read_reg(adapter, PL_INT_CAUSE_A);
4940
4941 if (!(cause & GLBL_INTR_MASK))
4942 return 0;
4943 if (cause & CIM_F)
4944 cim_intr_handler(adapter);
4945 if (cause & MPS_F)
4946 mps_intr_handler(adapter);
4947 if (cause & NCSI_F)
4948 ncsi_intr_handler(adapter);
4949 if (cause & PL_F)
4950 pl_intr_handler(adapter);
4951 if (cause & SMB_F)
4952 smb_intr_handler(adapter);
4953 if (cause & XGMAC0_F)
4954 xgmac_intr_handler(adapter, 0);
4955 if (cause & XGMAC1_F)
4956 xgmac_intr_handler(adapter, 1);
4957 if (cause & XGMAC_KR0_F)
4958 xgmac_intr_handler(adapter, 2);
4959 if (cause & XGMAC_KR1_F)
4960 xgmac_intr_handler(adapter, 3);
4961 if (cause & PCIE_F)
4962 pcie_intr_handler(adapter);
4963 if (cause & MC_F)
4964 mem_intr_handler(adapter, MEM_MC);
4965 if (is_t5(adapter->params.chip) && (cause & MC1_F))
4966 mem_intr_handler(adapter, MEM_MC1);
4967 if (cause & EDC0_F)
4968 mem_intr_handler(adapter, MEM_EDC0);
4969 if (cause & EDC1_F)
4970 mem_intr_handler(adapter, MEM_EDC1);
4971 if (cause & LE_F)
4972 le_intr_handler(adapter);
4973 if (cause & TP_F)
4974 tp_intr_handler(adapter);
4975 if (cause & MA_F)
4976 ma_intr_handler(adapter);
4977 if (cause & PM_TX_F)
4978 pmtx_intr_handler(adapter);
4979 if (cause & PM_RX_F)
4980 pmrx_intr_handler(adapter);
4981 if (cause & ULP_RX_F)
4982 ulprx_intr_handler(adapter);
4983 if (cause & CPL_SWITCH_F)
4984 cplsw_intr_handler(adapter);
4985 if (cause & SGE_F)
4986 sge_intr_handler(adapter);
4987 if (cause & ULP_TX_F)
4988 ulptx_intr_handler(adapter);
4989
4990 /* Clear the interrupts just processed for which we are the master. */
4991 t4_write_reg(adapter, PL_INT_CAUSE_A, cause & GLBL_INTR_MASK);
4992 (void)t4_read_reg(adapter, PL_INT_CAUSE_A); /* flush */
4993 return 1;
4994 }
4995
4996 /**
4997 * t4_intr_enable - enable interrupts
4998 * @adapter: the adapter whose interrupts should be enabled
4999 *
5000 * Enable PF-specific interrupts for the calling function and the top-level
5001 * interrupt concentrator for global interrupts. Interrupts are already
5002 * enabled at each module, here we just enable the roots of the interrupt
5003 * hierarchies.
5004 *
5005 * Note: this function should be called only when the driver manages
5006 * non PF-specific interrupts from the various HW modules. Only one PCI
5007 * function at a time should be doing this.
5008 */
t4_intr_enable(struct adapter * adapter)5009 void t4_intr_enable(struct adapter *adapter)
5010 {
5011 u32 val = 0;
5012 u32 whoami = t4_read_reg(adapter, PL_WHOAMI_A);
5013 u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
5014 SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami);
5015
5016 if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
5017 val = ERR_DROPPED_DB_F | ERR_EGR_CTXT_PRIO_F | DBFIFO_HP_INT_F;
5018 t4_write_reg(adapter, SGE_INT_ENABLE3_A, ERR_CPL_EXCEED_IQE_SIZE_F |
5019 ERR_INVALID_CIDX_INC_F | ERR_CPL_OPCODE_0_F |
5020 ERR_DATA_CPL_ON_HIGH_QID1_F | INGRESS_SIZE_ERR_F |
5021 ERR_DATA_CPL_ON_HIGH_QID0_F | ERR_BAD_DB_PIDX3_F |
5022 ERR_BAD_DB_PIDX2_F | ERR_BAD_DB_PIDX1_F |
5023 ERR_BAD_DB_PIDX0_F | ERR_ING_CTXT_PRIO_F |
5024 DBFIFO_LP_INT_F | EGRESS_SIZE_ERR_F | val);
5025 t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE_A), PF_INTR_MASK);
5026 t4_set_reg_field(adapter, PL_INT_MAP0_A, 0, 1 << pf);
5027 }
5028
5029 /**
5030 * t4_intr_disable - disable interrupts
5031 * @adapter: the adapter whose interrupts should be disabled
5032 *
5033 * Disable interrupts. We only disable the top-level interrupt
5034 * concentrators. The caller must be a PCI function managing global
5035 * interrupts.
5036 */
t4_intr_disable(struct adapter * adapter)5037 void t4_intr_disable(struct adapter *adapter)
5038 {
5039 u32 whoami, pf;
5040
5041 if (pci_channel_offline(adapter->pdev))
5042 return;
5043
5044 whoami = t4_read_reg(adapter, PL_WHOAMI_A);
5045 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
5046 SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami);
5047
5048 t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE_A), 0);
5049 t4_set_reg_field(adapter, PL_INT_MAP0_A, 1 << pf, 0);
5050 }
5051
t4_chip_rss_size(struct adapter * adap)5052 unsigned int t4_chip_rss_size(struct adapter *adap)
5053 {
5054 if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
5055 return RSS_NENTRIES;
5056 else
5057 return T6_RSS_NENTRIES;
5058 }
5059
5060 /**
5061 * t4_config_rss_range - configure a portion of the RSS mapping table
5062 * @adapter: the adapter
5063 * @mbox: mbox to use for the FW command
5064 * @viid: virtual interface whose RSS subtable is to be written
5065 * @start: start entry in the table to write
5066 * @n: how many table entries to write
5067 * @rspq: values for the response queue lookup table
5068 * @nrspq: number of values in @rspq
5069 *
5070 * Programs the selected part of the VI's RSS mapping table with the
5071 * provided values. If @nrspq < @n the supplied values are used repeatedly
5072 * until the full table range is populated.
5073 *
5074 * The caller must ensure the values in @rspq are in the range allowed for
5075 * @viid.
5076 */
t4_config_rss_range(struct adapter * adapter,int mbox,unsigned int viid,int start,int n,const u16 * rspq,unsigned int nrspq)5077 int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid,
5078 int start, int n, const u16 *rspq, unsigned int nrspq)
5079 {
5080 int ret;
5081 const u16 *rsp = rspq;
5082 const u16 *rsp_end = rspq + nrspq;
5083 struct fw_rss_ind_tbl_cmd cmd;
5084
5085 memset(&cmd, 0, sizeof(cmd));
5086 cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_IND_TBL_CMD) |
5087 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
5088 FW_RSS_IND_TBL_CMD_VIID_V(viid));
5089 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
5090
5091 /* each fw_rss_ind_tbl_cmd takes up to 32 entries */
5092 while (n > 0) {
5093 int nq = min(n, 32);
5094 __be32 *qp = &cmd.iq0_to_iq2;
5095
5096 cmd.niqid = cpu_to_be16(nq);
5097 cmd.startidx = cpu_to_be16(start);
5098
5099 start += nq;
5100 n -= nq;
5101
5102 while (nq > 0) {
5103 unsigned int v;
5104
5105 v = FW_RSS_IND_TBL_CMD_IQ0_V(*rsp);
5106 if (++rsp >= rsp_end)
5107 rsp = rspq;
5108 v |= FW_RSS_IND_TBL_CMD_IQ1_V(*rsp);
5109 if (++rsp >= rsp_end)
5110 rsp = rspq;
5111 v |= FW_RSS_IND_TBL_CMD_IQ2_V(*rsp);
5112 if (++rsp >= rsp_end)
5113 rsp = rspq;
5114
5115 *qp++ = cpu_to_be32(v);
5116 nq -= 3;
5117 }
5118
5119 ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL);
5120 if (ret)
5121 return ret;
5122 }
5123 return 0;
5124 }
5125
5126 /**
5127 * t4_config_glbl_rss - configure the global RSS mode
5128 * @adapter: the adapter
5129 * @mbox: mbox to use for the FW command
5130 * @mode: global RSS mode
5131 * @flags: mode-specific flags
5132 *
5133 * Sets the global RSS mode.
5134 */
t4_config_glbl_rss(struct adapter * adapter,int mbox,unsigned int mode,unsigned int flags)5135 int t4_config_glbl_rss(struct adapter *adapter, int mbox, unsigned int mode,
5136 unsigned int flags)
5137 {
5138 struct fw_rss_glb_config_cmd c;
5139
5140 memset(&c, 0, sizeof(c));
5141 c.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_RSS_GLB_CONFIG_CMD) |
5142 FW_CMD_REQUEST_F | FW_CMD_WRITE_F);
5143 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
5144 if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) {
5145 c.u.manual.mode_pkd =
5146 cpu_to_be32(FW_RSS_GLB_CONFIG_CMD_MODE_V(mode));
5147 } else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) {
5148 c.u.basicvirtual.mode_pkd =
5149 cpu_to_be32(FW_RSS_GLB_CONFIG_CMD_MODE_V(mode));
5150 c.u.basicvirtual.synmapen_to_hashtoeplitz = cpu_to_be32(flags);
5151 } else
5152 return -EINVAL;
5153 return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL);
5154 }
5155
5156 /**
5157 * t4_config_vi_rss - configure per VI RSS settings
5158 * @adapter: the adapter
5159 * @mbox: mbox to use for the FW command
5160 * @viid: the VI id
5161 * @flags: RSS flags
5162 * @defq: id of the default RSS queue for the VI.
5163 *
5164 * Configures VI-specific RSS properties.
5165 */
t4_config_vi_rss(struct adapter * adapter,int mbox,unsigned int viid,unsigned int flags,unsigned int defq)5166 int t4_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid,
5167 unsigned int flags, unsigned int defq)
5168 {
5169 struct fw_rss_vi_config_cmd c;
5170
5171 memset(&c, 0, sizeof(c));
5172 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) |
5173 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
5174 FW_RSS_VI_CONFIG_CMD_VIID_V(viid));
5175 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
5176 c.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(flags |
5177 FW_RSS_VI_CONFIG_CMD_DEFAULTQ_V(defq));
5178 return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL);
5179 }
5180
5181 /* Read an RSS table row */
rd_rss_row(struct adapter * adap,int row,u32 * val)5182 static int rd_rss_row(struct adapter *adap, int row, u32 *val)
5183 {
5184 t4_write_reg(adap, TP_RSS_LKP_TABLE_A, 0xfff00000 | row);
5185 return t4_wait_op_done_val(adap, TP_RSS_LKP_TABLE_A, LKPTBLROWVLD_F, 1,
5186 5, 0, val);
5187 }
5188
5189 /**
5190 * t4_read_rss - read the contents of the RSS mapping table
5191 * @adapter: the adapter
5192 * @map: holds the contents of the RSS mapping table
5193 *
5194 * Reads the contents of the RSS hash->queue mapping table.
5195 */
t4_read_rss(struct adapter * adapter,u16 * map)5196 int t4_read_rss(struct adapter *adapter, u16 *map)
5197 {
5198 int i, ret, nentries;
5199 u32 val;
5200
5201 nentries = t4_chip_rss_size(adapter);
5202 for (i = 0; i < nentries / 2; ++i) {
5203 ret = rd_rss_row(adapter, i, &val);
5204 if (ret)
5205 return ret;
5206 *map++ = LKPTBLQUEUE0_G(val);
5207 *map++ = LKPTBLQUEUE1_G(val);
5208 }
5209 return 0;
5210 }
5211
t4_use_ldst(struct adapter * adap)5212 static unsigned int t4_use_ldst(struct adapter *adap)
5213 {
5214 return (adap->flags & FW_OK) && !adap->use_bd;
5215 }
5216
5217 /**
5218 * t4_tp_fw_ldst_rw - Access TP indirect register through LDST
5219 * @adap: the adapter
5220 * @cmd: TP fw ldst address space type
5221 * @vals: where the indirect register values are stored/written
5222 * @nregs: how many indirect registers to read/write
5223 * @start_idx: index of first indirect register to read/write
5224 * @rw: Read (1) or Write (0)
5225 * @sleep_ok: if true we may sleep while awaiting command completion
5226 *
5227 * Access TP indirect registers through LDST
5228 */
t4_tp_fw_ldst_rw(struct adapter * adap,int cmd,u32 * vals,unsigned int nregs,unsigned int start_index,unsigned int rw,bool sleep_ok)5229 static int t4_tp_fw_ldst_rw(struct adapter *adap, int cmd, u32 *vals,
5230 unsigned int nregs, unsigned int start_index,
5231 unsigned int rw, bool sleep_ok)
5232 {
5233 int ret = 0;
5234 unsigned int i;
5235 struct fw_ldst_cmd c;
5236
5237 for (i = 0; i < nregs; i++) {
5238 memset(&c, 0, sizeof(c));
5239 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
5240 FW_CMD_REQUEST_F |
5241 (rw ? FW_CMD_READ_F :
5242 FW_CMD_WRITE_F) |
5243 FW_LDST_CMD_ADDRSPACE_V(cmd));
5244 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
5245
5246 c.u.addrval.addr = cpu_to_be32(start_index + i);
5247 c.u.addrval.val = rw ? 0 : cpu_to_be32(vals[i]);
5248 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c,
5249 sleep_ok);
5250 if (ret)
5251 return ret;
5252
5253 if (rw)
5254 vals[i] = be32_to_cpu(c.u.addrval.val);
5255 }
5256 return 0;
5257 }
5258
5259 /**
5260 * t4_tp_indirect_rw - Read/Write TP indirect register through LDST or backdoor
5261 * @adap: the adapter
5262 * @reg_addr: Address Register
5263 * @reg_data: Data register
5264 * @buff: where the indirect register values are stored/written
5265 * @nregs: how many indirect registers to read/write
5266 * @start_index: index of first indirect register to read/write
5267 * @rw: READ(1) or WRITE(0)
5268 * @sleep_ok: if true we may sleep while awaiting command completion
5269 *
5270 * Read/Write TP indirect registers through LDST if possible.
5271 * Else, use backdoor access
5272 **/
t4_tp_indirect_rw(struct adapter * adap,u32 reg_addr,u32 reg_data,u32 * buff,u32 nregs,u32 start_index,int rw,bool sleep_ok)5273 static void t4_tp_indirect_rw(struct adapter *adap, u32 reg_addr, u32 reg_data,
5274 u32 *buff, u32 nregs, u32 start_index, int rw,
5275 bool sleep_ok)
5276 {
5277 int rc = -EINVAL;
5278 int cmd;
5279
5280 switch (reg_addr) {
5281 case TP_PIO_ADDR_A:
5282 cmd = FW_LDST_ADDRSPC_TP_PIO;
5283 break;
5284 case TP_TM_PIO_ADDR_A:
5285 cmd = FW_LDST_ADDRSPC_TP_TM_PIO;
5286 break;
5287 case TP_MIB_INDEX_A:
5288 cmd = FW_LDST_ADDRSPC_TP_MIB;
5289 break;
5290 default:
5291 goto indirect_access;
5292 }
5293
5294 if (t4_use_ldst(adap))
5295 rc = t4_tp_fw_ldst_rw(adap, cmd, buff, nregs, start_index, rw,
5296 sleep_ok);
5297
5298 indirect_access:
5299
5300 if (rc) {
5301 if (rw)
5302 t4_read_indirect(adap, reg_addr, reg_data, buff, nregs,
5303 start_index);
5304 else
5305 t4_write_indirect(adap, reg_addr, reg_data, buff, nregs,
5306 start_index);
5307 }
5308 }
5309
5310 /**
5311 * t4_tp_pio_read - Read TP PIO registers
5312 * @adap: the adapter
5313 * @buff: where the indirect register values are written
5314 * @nregs: how many indirect registers to read
5315 * @start_index: index of first indirect register to read
5316 * @sleep_ok: if true we may sleep while awaiting command completion
5317 *
5318 * Read TP PIO Registers
5319 **/
t4_tp_pio_read(struct adapter * adap,u32 * buff,u32 nregs,u32 start_index,bool sleep_ok)5320 void t4_tp_pio_read(struct adapter *adap, u32 *buff, u32 nregs,
5321 u32 start_index, bool sleep_ok)
5322 {
5323 t4_tp_indirect_rw(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, buff, nregs,
5324 start_index, 1, sleep_ok);
5325 }
5326
5327 /**
5328 * t4_tp_pio_write - Write TP PIO registers
5329 * @adap: the adapter
5330 * @buff: where the indirect register values are stored
5331 * @nregs: how many indirect registers to write
5332 * @start_index: index of first indirect register to write
5333 * @sleep_ok: if true we may sleep while awaiting command completion
5334 *
5335 * Write TP PIO Registers
5336 **/
t4_tp_pio_write(struct adapter * adap,u32 * buff,u32 nregs,u32 start_index,bool sleep_ok)5337 static void t4_tp_pio_write(struct adapter *adap, u32 *buff, u32 nregs,
5338 u32 start_index, bool sleep_ok)
5339 {
5340 t4_tp_indirect_rw(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, buff, nregs,
5341 start_index, 0, sleep_ok);
5342 }
5343
5344 /**
5345 * t4_tp_tm_pio_read - Read TP TM PIO registers
5346 * @adap: the adapter
5347 * @buff: where the indirect register values are written
5348 * @nregs: how many indirect registers to read
5349 * @start_index: index of first indirect register to read
5350 * @sleep_ok: if true we may sleep while awaiting command completion
5351 *
5352 * Read TP TM PIO Registers
5353 **/
t4_tp_tm_pio_read(struct adapter * adap,u32 * buff,u32 nregs,u32 start_index,bool sleep_ok)5354 void t4_tp_tm_pio_read(struct adapter *adap, u32 *buff, u32 nregs,
5355 u32 start_index, bool sleep_ok)
5356 {
5357 t4_tp_indirect_rw(adap, TP_TM_PIO_ADDR_A, TP_TM_PIO_DATA_A, buff,
5358 nregs, start_index, 1, sleep_ok);
5359 }
5360
5361 /**
5362 * t4_tp_mib_read - Read TP MIB registers
5363 * @adap: the adapter
5364 * @buff: where the indirect register values are written
5365 * @nregs: how many indirect registers to read
5366 * @start_index: index of first indirect register to read
5367 * @sleep_ok: if true we may sleep while awaiting command completion
5368 *
5369 * Read TP MIB Registers
5370 **/
t4_tp_mib_read(struct adapter * adap,u32 * buff,u32 nregs,u32 start_index,bool sleep_ok)5371 void t4_tp_mib_read(struct adapter *adap, u32 *buff, u32 nregs, u32 start_index,
5372 bool sleep_ok)
5373 {
5374 t4_tp_indirect_rw(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, buff, nregs,
5375 start_index, 1, sleep_ok);
5376 }
5377
5378 /**
5379 * t4_read_rss_key - read the global RSS key
5380 * @adap: the adapter
5381 * @key: 10-entry array holding the 320-bit RSS key
5382 * @sleep_ok: if true we may sleep while awaiting command completion
5383 *
5384 * Reads the global 320-bit RSS key.
5385 */
t4_read_rss_key(struct adapter * adap,u32 * key,bool sleep_ok)5386 void t4_read_rss_key(struct adapter *adap, u32 *key, bool sleep_ok)
5387 {
5388 t4_tp_pio_read(adap, key, 10, TP_RSS_SECRET_KEY0_A, sleep_ok);
5389 }
5390
5391 /**
5392 * t4_write_rss_key - program one of the RSS keys
5393 * @adap: the adapter
5394 * @key: 10-entry array holding the 320-bit RSS key
5395 * @idx: which RSS key to write
5396 * @sleep_ok: if true we may sleep while awaiting command completion
5397 *
5398 * Writes one of the RSS keys with the given 320-bit value. If @idx is
5399 * 0..15 the corresponding entry in the RSS key table is written,
5400 * otherwise the global RSS key is written.
5401 */
t4_write_rss_key(struct adapter * adap,const u32 * key,int idx,bool sleep_ok)5402 void t4_write_rss_key(struct adapter *adap, const u32 *key, int idx,
5403 bool sleep_ok)
5404 {
5405 u8 rss_key_addr_cnt = 16;
5406 u32 vrt = t4_read_reg(adap, TP_RSS_CONFIG_VRT_A);
5407
5408 /* T6 and later: for KeyMode 3 (per-vf and per-vf scramble),
5409 * allows access to key addresses 16-63 by using KeyWrAddrX
5410 * as index[5:4](upper 2) into key table
5411 */
5412 if ((CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) &&
5413 (vrt & KEYEXTEND_F) && (KEYMODE_G(vrt) == 3))
5414 rss_key_addr_cnt = 32;
5415
5416 t4_tp_pio_write(adap, (void *)key, 10, TP_RSS_SECRET_KEY0_A, sleep_ok);
5417
5418 if (idx >= 0 && idx < rss_key_addr_cnt) {
5419 if (rss_key_addr_cnt > 16)
5420 t4_write_reg(adap, TP_RSS_CONFIG_VRT_A,
5421 KEYWRADDRX_V(idx >> 4) |
5422 T6_VFWRADDR_V(idx) | KEYWREN_F);
5423 else
5424 t4_write_reg(adap, TP_RSS_CONFIG_VRT_A,
5425 KEYWRADDR_V(idx) | KEYWREN_F);
5426 }
5427 }
5428
5429 /**
5430 * t4_read_rss_pf_config - read PF RSS Configuration Table
5431 * @adapter: the adapter
5432 * @index: the entry in the PF RSS table to read
5433 * @valp: where to store the returned value
5434 * @sleep_ok: if true we may sleep while awaiting command completion
5435 *
5436 * Reads the PF RSS Configuration Table at the specified index and returns
5437 * the value found there.
5438 */
t4_read_rss_pf_config(struct adapter * adapter,unsigned int index,u32 * valp,bool sleep_ok)5439 void t4_read_rss_pf_config(struct adapter *adapter, unsigned int index,
5440 u32 *valp, bool sleep_ok)
5441 {
5442 t4_tp_pio_read(adapter, valp, 1, TP_RSS_PF0_CONFIG_A + index, sleep_ok);
5443 }
5444
5445 /**
5446 * t4_read_rss_vf_config - read VF RSS Configuration Table
5447 * @adapter: the adapter
5448 * @index: the entry in the VF RSS table to read
5449 * @vfl: where to store the returned VFL
5450 * @vfh: where to store the returned VFH
5451 * @sleep_ok: if true we may sleep while awaiting command completion
5452 *
5453 * Reads the VF RSS Configuration Table at the specified index and returns
5454 * the (VFL, VFH) values found there.
5455 */
t4_read_rss_vf_config(struct adapter * adapter,unsigned int index,u32 * vfl,u32 * vfh,bool sleep_ok)5456 void t4_read_rss_vf_config(struct adapter *adapter, unsigned int index,
5457 u32 *vfl, u32 *vfh, bool sleep_ok)
5458 {
5459 u32 vrt, mask, data;
5460
5461 if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) {
5462 mask = VFWRADDR_V(VFWRADDR_M);
5463 data = VFWRADDR_V(index);
5464 } else {
5465 mask = T6_VFWRADDR_V(T6_VFWRADDR_M);
5466 data = T6_VFWRADDR_V(index);
5467 }
5468
5469 /* Request that the index'th VF Table values be read into VFL/VFH.
5470 */
5471 vrt = t4_read_reg(adapter, TP_RSS_CONFIG_VRT_A);
5472 vrt &= ~(VFRDRG_F | VFWREN_F | KEYWREN_F | mask);
5473 vrt |= data | VFRDEN_F;
5474 t4_write_reg(adapter, TP_RSS_CONFIG_VRT_A, vrt);
5475
5476 /* Grab the VFL/VFH values ...
5477 */
5478 t4_tp_pio_read(adapter, vfl, 1, TP_RSS_VFL_CONFIG_A, sleep_ok);
5479 t4_tp_pio_read(adapter, vfh, 1, TP_RSS_VFH_CONFIG_A, sleep_ok);
5480 }
5481
5482 /**
5483 * t4_read_rss_pf_map - read PF RSS Map
5484 * @adapter: the adapter
5485 * @sleep_ok: if true we may sleep while awaiting command completion
5486 *
5487 * Reads the PF RSS Map register and returns its value.
5488 */
t4_read_rss_pf_map(struct adapter * adapter,bool sleep_ok)5489 u32 t4_read_rss_pf_map(struct adapter *adapter, bool sleep_ok)
5490 {
5491 u32 pfmap;
5492
5493 t4_tp_pio_read(adapter, &pfmap, 1, TP_RSS_PF_MAP_A, sleep_ok);
5494 return pfmap;
5495 }
5496
5497 /**
5498 * t4_read_rss_pf_mask - read PF RSS Mask
5499 * @adapter: the adapter
5500 * @sleep_ok: if true we may sleep while awaiting command completion
5501 *
5502 * Reads the PF RSS Mask register and returns its value.
5503 */
t4_read_rss_pf_mask(struct adapter * adapter,bool sleep_ok)5504 u32 t4_read_rss_pf_mask(struct adapter *adapter, bool sleep_ok)
5505 {
5506 u32 pfmask;
5507
5508 t4_tp_pio_read(adapter, &pfmask, 1, TP_RSS_PF_MSK_A, sleep_ok);
5509 return pfmask;
5510 }
5511
5512 /**
5513 * t4_tp_get_tcp_stats - read TP's TCP MIB counters
5514 * @adap: the adapter
5515 * @v4: holds the TCP/IP counter values
5516 * @v6: holds the TCP/IPv6 counter values
5517 * @sleep_ok: if true we may sleep while awaiting command completion
5518 *
5519 * Returns the values of TP's TCP/IP and TCP/IPv6 MIB counters.
5520 * Either @v4 or @v6 may be %NULL to skip the corresponding stats.
5521 */
t4_tp_get_tcp_stats(struct adapter * adap,struct tp_tcp_stats * v4,struct tp_tcp_stats * v6,bool sleep_ok)5522 void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4,
5523 struct tp_tcp_stats *v6, bool sleep_ok)
5524 {
5525 u32 val[TP_MIB_TCP_RXT_SEG_LO_A - TP_MIB_TCP_OUT_RST_A + 1];
5526
5527 #define STAT_IDX(x) ((TP_MIB_TCP_##x##_A) - TP_MIB_TCP_OUT_RST_A)
5528 #define STAT(x) val[STAT_IDX(x)]
5529 #define STAT64(x) (((u64)STAT(x##_HI) << 32) | STAT(x##_LO))
5530
5531 if (v4) {
5532 t4_tp_mib_read(adap, val, ARRAY_SIZE(val),
5533 TP_MIB_TCP_OUT_RST_A, sleep_ok);
5534 v4->tcp_out_rsts = STAT(OUT_RST);
5535 v4->tcp_in_segs = STAT64(IN_SEG);
5536 v4->tcp_out_segs = STAT64(OUT_SEG);
5537 v4->tcp_retrans_segs = STAT64(RXT_SEG);
5538 }
5539 if (v6) {
5540 t4_tp_mib_read(adap, val, ARRAY_SIZE(val),
5541 TP_MIB_TCP_V6OUT_RST_A, sleep_ok);
5542 v6->tcp_out_rsts = STAT(OUT_RST);
5543 v6->tcp_in_segs = STAT64(IN_SEG);
5544 v6->tcp_out_segs = STAT64(OUT_SEG);
5545 v6->tcp_retrans_segs = STAT64(RXT_SEG);
5546 }
5547 #undef STAT64
5548 #undef STAT
5549 #undef STAT_IDX
5550 }
5551
5552 /**
5553 * t4_tp_get_err_stats - read TP's error MIB counters
5554 * @adap: the adapter
5555 * @st: holds the counter values
5556 * @sleep_ok: if true we may sleep while awaiting command completion
5557 *
5558 * Returns the values of TP's error counters.
5559 */
t4_tp_get_err_stats(struct adapter * adap,struct tp_err_stats * st,bool sleep_ok)5560 void t4_tp_get_err_stats(struct adapter *adap, struct tp_err_stats *st,
5561 bool sleep_ok)
5562 {
5563 int nchan = adap->params.arch.nchan;
5564
5565 t4_tp_mib_read(adap, st->mac_in_errs, nchan, TP_MIB_MAC_IN_ERR_0_A,
5566 sleep_ok);
5567 t4_tp_mib_read(adap, st->hdr_in_errs, nchan, TP_MIB_HDR_IN_ERR_0_A,
5568 sleep_ok);
5569 t4_tp_mib_read(adap, st->tcp_in_errs, nchan, TP_MIB_TCP_IN_ERR_0_A,
5570 sleep_ok);
5571 t4_tp_mib_read(adap, st->tnl_cong_drops, nchan,
5572 TP_MIB_TNL_CNG_DROP_0_A, sleep_ok);
5573 t4_tp_mib_read(adap, st->ofld_chan_drops, nchan,
5574 TP_MIB_OFD_CHN_DROP_0_A, sleep_ok);
5575 t4_tp_mib_read(adap, st->tnl_tx_drops, nchan, TP_MIB_TNL_DROP_0_A,
5576 sleep_ok);
5577 t4_tp_mib_read(adap, st->ofld_vlan_drops, nchan,
5578 TP_MIB_OFD_VLN_DROP_0_A, sleep_ok);
5579 t4_tp_mib_read(adap, st->tcp6_in_errs, nchan,
5580 TP_MIB_TCP_V6IN_ERR_0_A, sleep_ok);
5581 t4_tp_mib_read(adap, &st->ofld_no_neigh, 2, TP_MIB_OFD_ARP_DROP_A,
5582 sleep_ok);
5583 }
5584
5585 /**
5586 * t4_tp_get_cpl_stats - read TP's CPL MIB counters
5587 * @adap: the adapter
5588 * @st: holds the counter values
5589 * @sleep_ok: if true we may sleep while awaiting command completion
5590 *
5591 * Returns the values of TP's CPL counters.
5592 */
t4_tp_get_cpl_stats(struct adapter * adap,struct tp_cpl_stats * st,bool sleep_ok)5593 void t4_tp_get_cpl_stats(struct adapter *adap, struct tp_cpl_stats *st,
5594 bool sleep_ok)
5595 {
5596 int nchan = adap->params.arch.nchan;
5597
5598 t4_tp_mib_read(adap, st->req, nchan, TP_MIB_CPL_IN_REQ_0_A, sleep_ok);
5599
5600 t4_tp_mib_read(adap, st->rsp, nchan, TP_MIB_CPL_OUT_RSP_0_A, sleep_ok);
5601 }
5602
5603 /**
5604 * t4_tp_get_rdma_stats - read TP's RDMA MIB counters
5605 * @adap: the adapter
5606 * @st: holds the counter values
5607 * @sleep_ok: if true we may sleep while awaiting command completion
5608 *
5609 * Returns the values of TP's RDMA counters.
5610 */
t4_tp_get_rdma_stats(struct adapter * adap,struct tp_rdma_stats * st,bool sleep_ok)5611 void t4_tp_get_rdma_stats(struct adapter *adap, struct tp_rdma_stats *st,
5612 bool sleep_ok)
5613 {
5614 t4_tp_mib_read(adap, &st->rqe_dfr_pkt, 2, TP_MIB_RQE_DFR_PKT_A,
5615 sleep_ok);
5616 }
5617
5618 /**
5619 * t4_get_fcoe_stats - read TP's FCoE MIB counters for a port
5620 * @adap: the adapter
5621 * @idx: the port index
5622 * @st: holds the counter values
5623 * @sleep_ok: if true we may sleep while awaiting command completion
5624 *
5625 * Returns the values of TP's FCoE counters for the selected port.
5626 */
t4_get_fcoe_stats(struct adapter * adap,unsigned int idx,struct tp_fcoe_stats * st,bool sleep_ok)5627 void t4_get_fcoe_stats(struct adapter *adap, unsigned int idx,
5628 struct tp_fcoe_stats *st, bool sleep_ok)
5629 {
5630 u32 val[2];
5631
5632 t4_tp_mib_read(adap, &st->frames_ddp, 1, TP_MIB_FCOE_DDP_0_A + idx,
5633 sleep_ok);
5634
5635 t4_tp_mib_read(adap, &st->frames_drop, 1,
5636 TP_MIB_FCOE_DROP_0_A + idx, sleep_ok);
5637
5638 t4_tp_mib_read(adap, val, 2, TP_MIB_FCOE_BYTE_0_HI_A + 2 * idx,
5639 sleep_ok);
5640
5641 st->octets_ddp = ((u64)val[0] << 32) | val[1];
5642 }
5643
5644 /**
5645 * t4_get_usm_stats - read TP's non-TCP DDP MIB counters
5646 * @adap: the adapter
5647 * @st: holds the counter values
5648 * @sleep_ok: if true we may sleep while awaiting command completion
5649 *
5650 * Returns the values of TP's counters for non-TCP directly-placed packets.
5651 */
t4_get_usm_stats(struct adapter * adap,struct tp_usm_stats * st,bool sleep_ok)5652 void t4_get_usm_stats(struct adapter *adap, struct tp_usm_stats *st,
5653 bool sleep_ok)
5654 {
5655 u32 val[4];
5656
5657 t4_tp_mib_read(adap, val, 4, TP_MIB_USM_PKTS_A, sleep_ok);
5658 st->frames = val[0];
5659 st->drops = val[1];
5660 st->octets = ((u64)val[2] << 32) | val[3];
5661 }
5662
5663 /**
5664 * t4_read_mtu_tbl - returns the values in the HW path MTU table
5665 * @adap: the adapter
5666 * @mtus: where to store the MTU values
5667 * @mtu_log: where to store the MTU base-2 log (may be %NULL)
5668 *
5669 * Reads the HW path MTU table.
5670 */
t4_read_mtu_tbl(struct adapter * adap,u16 * mtus,u8 * mtu_log)5671 void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log)
5672 {
5673 u32 v;
5674 int i;
5675
5676 for (i = 0; i < NMTUS; ++i) {
5677 t4_write_reg(adap, TP_MTU_TABLE_A,
5678 MTUINDEX_V(0xff) | MTUVALUE_V(i));
5679 v = t4_read_reg(adap, TP_MTU_TABLE_A);
5680 mtus[i] = MTUVALUE_G(v);
5681 if (mtu_log)
5682 mtu_log[i] = MTUWIDTH_G(v);
5683 }
5684 }
5685
5686 /**
5687 * t4_read_cong_tbl - reads the congestion control table
5688 * @adap: the adapter
5689 * @incr: where to store the alpha values
5690 *
5691 * Reads the additive increments programmed into the HW congestion
5692 * control table.
5693 */
t4_read_cong_tbl(struct adapter * adap,u16 incr[NMTUS][NCCTRL_WIN])5694 void t4_read_cong_tbl(struct adapter *adap, u16 incr[NMTUS][NCCTRL_WIN])
5695 {
5696 unsigned int mtu, w;
5697
5698 for (mtu = 0; mtu < NMTUS; ++mtu)
5699 for (w = 0; w < NCCTRL_WIN; ++w) {
5700 t4_write_reg(adap, TP_CCTRL_TABLE_A,
5701 ROWINDEX_V(0xffff) | (mtu << 5) | w);
5702 incr[mtu][w] = (u16)t4_read_reg(adap,
5703 TP_CCTRL_TABLE_A) & 0x1fff;
5704 }
5705 }
5706
5707 /**
5708 * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register
5709 * @adap: the adapter
5710 * @addr: the indirect TP register address
5711 * @mask: specifies the field within the register to modify
5712 * @val: new value for the field
5713 *
5714 * Sets a field of an indirect TP register to the given value.
5715 */
t4_tp_wr_bits_indirect(struct adapter * adap,unsigned int addr,unsigned int mask,unsigned int val)5716 void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr,
5717 unsigned int mask, unsigned int val)
5718 {
5719 t4_write_reg(adap, TP_PIO_ADDR_A, addr);
5720 val |= t4_read_reg(adap, TP_PIO_DATA_A) & ~mask;
5721 t4_write_reg(adap, TP_PIO_DATA_A, val);
5722 }
5723
5724 /**
5725 * init_cong_ctrl - initialize congestion control parameters
5726 * @a: the alpha values for congestion control
5727 * @b: the beta values for congestion control
5728 *
5729 * Initialize the congestion control parameters.
5730 */
init_cong_ctrl(unsigned short * a,unsigned short * b)5731 static void init_cong_ctrl(unsigned short *a, unsigned short *b)
5732 {
5733 a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1;
5734 a[9] = 2;
5735 a[10] = 3;
5736 a[11] = 4;
5737 a[12] = 5;
5738 a[13] = 6;
5739 a[14] = 7;
5740 a[15] = 8;
5741 a[16] = 9;
5742 a[17] = 10;
5743 a[18] = 14;
5744 a[19] = 17;
5745 a[20] = 21;
5746 a[21] = 25;
5747 a[22] = 30;
5748 a[23] = 35;
5749 a[24] = 45;
5750 a[25] = 60;
5751 a[26] = 80;
5752 a[27] = 100;
5753 a[28] = 200;
5754 a[29] = 300;
5755 a[30] = 400;
5756 a[31] = 500;
5757
5758 b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0;
5759 b[9] = b[10] = 1;
5760 b[11] = b[12] = 2;
5761 b[13] = b[14] = b[15] = b[16] = 3;
5762 b[17] = b[18] = b[19] = b[20] = b[21] = 4;
5763 b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5;
5764 b[28] = b[29] = 6;
5765 b[30] = b[31] = 7;
5766 }
5767
5768 /* The minimum additive increment value for the congestion control table */
5769 #define CC_MIN_INCR 2U
5770
5771 /**
5772 * t4_load_mtus - write the MTU and congestion control HW tables
5773 * @adap: the adapter
5774 * @mtus: the values for the MTU table
5775 * @alpha: the values for the congestion control alpha parameter
5776 * @beta: the values for the congestion control beta parameter
5777 *
5778 * Write the HW MTU table with the supplied MTUs and the high-speed
5779 * congestion control table with the supplied alpha, beta, and MTUs.
5780 * We write the two tables together because the additive increments
5781 * depend on the MTUs.
5782 */
t4_load_mtus(struct adapter * adap,const unsigned short * mtus,const unsigned short * alpha,const unsigned short * beta)5783 void t4_load_mtus(struct adapter *adap, const unsigned short *mtus,
5784 const unsigned short *alpha, const unsigned short *beta)
5785 {
5786 static const unsigned int avg_pkts[NCCTRL_WIN] = {
5787 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640,
5788 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480,
5789 28672, 40960, 57344, 81920, 114688, 163840, 229376
5790 };
5791
5792 unsigned int i, w;
5793
5794 for (i = 0; i < NMTUS; ++i) {
5795 unsigned int mtu = mtus[i];
5796 unsigned int log2 = fls(mtu);
5797
5798 if (!(mtu & ((1 << log2) >> 2))) /* round */
5799 log2--;
5800 t4_write_reg(adap, TP_MTU_TABLE_A, MTUINDEX_V(i) |
5801 MTUWIDTH_V(log2) | MTUVALUE_V(mtu));
5802
5803 for (w = 0; w < NCCTRL_WIN; ++w) {
5804 unsigned int inc;
5805
5806 inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w],
5807 CC_MIN_INCR);
5808
5809 t4_write_reg(adap, TP_CCTRL_TABLE_A, (i << 21) |
5810 (w << 16) | (beta[w] << 13) | inc);
5811 }
5812 }
5813 }
5814
5815 /* Calculates a rate in bytes/s given the number of 256-byte units per 4K core
5816 * clocks. The formula is
5817 *
5818 * bytes/s = bytes256 * 256 * ClkFreq / 4096
5819 *
5820 * which is equivalent to
5821 *
5822 * bytes/s = 62.5 * bytes256 * ClkFreq_ms
5823 */
chan_rate(struct adapter * adap,unsigned int bytes256)5824 static u64 chan_rate(struct adapter *adap, unsigned int bytes256)
5825 {
5826 u64 v = bytes256 * adap->params.vpd.cclk;
5827
5828 return v * 62 + v / 2;
5829 }
5830
5831 /**
5832 * t4_get_chan_txrate - get the current per channel Tx rates
5833 * @adap: the adapter
5834 * @nic_rate: rates for NIC traffic
5835 * @ofld_rate: rates for offloaded traffic
5836 *
5837 * Return the current Tx rates in bytes/s for NIC and offloaded traffic
5838 * for each channel.
5839 */
t4_get_chan_txrate(struct adapter * adap,u64 * nic_rate,u64 * ofld_rate)5840 void t4_get_chan_txrate(struct adapter *adap, u64 *nic_rate, u64 *ofld_rate)
5841 {
5842 u32 v;
5843
5844 v = t4_read_reg(adap, TP_TX_TRATE_A);
5845 nic_rate[0] = chan_rate(adap, TNLRATE0_G(v));
5846 nic_rate[1] = chan_rate(adap, TNLRATE1_G(v));
5847 if (adap->params.arch.nchan == NCHAN) {
5848 nic_rate[2] = chan_rate(adap, TNLRATE2_G(v));
5849 nic_rate[3] = chan_rate(adap, TNLRATE3_G(v));
5850 }
5851
5852 v = t4_read_reg(adap, TP_TX_ORATE_A);
5853 ofld_rate[0] = chan_rate(adap, OFDRATE0_G(v));
5854 ofld_rate[1] = chan_rate(adap, OFDRATE1_G(v));
5855 if (adap->params.arch.nchan == NCHAN) {
5856 ofld_rate[2] = chan_rate(adap, OFDRATE2_G(v));
5857 ofld_rate[3] = chan_rate(adap, OFDRATE3_G(v));
5858 }
5859 }
5860
5861 /**
5862 * t4_set_trace_filter - configure one of the tracing filters
5863 * @adap: the adapter
5864 * @tp: the desired trace filter parameters
5865 * @idx: which filter to configure
5866 * @enable: whether to enable or disable the filter
5867 *
5868 * Configures one of the tracing filters available in HW. If @enable is
5869 * %0 @tp is not examined and may be %NULL. The user is responsible to
5870 * set the single/multiple trace mode by writing to MPS_TRC_CFG_A register
5871 */
t4_set_trace_filter(struct adapter * adap,const struct trace_params * tp,int idx,int enable)5872 int t4_set_trace_filter(struct adapter *adap, const struct trace_params *tp,
5873 int idx, int enable)
5874 {
5875 int i, ofst = idx * 4;
5876 u32 data_reg, mask_reg, cfg;
5877 u32 multitrc = TRCMULTIFILTER_F;
5878
5879 if (!enable) {
5880 t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst, 0);
5881 return 0;
5882 }
5883
5884 cfg = t4_read_reg(adap, MPS_TRC_CFG_A);
5885 if (cfg & TRCMULTIFILTER_F) {
5886 /* If multiple tracers are enabled, then maximum
5887 * capture size is 2.5KB (FIFO size of a single channel)
5888 * minus 2 flits for CPL_TRACE_PKT header.
5889 */
5890 if (tp->snap_len > ((10 * 1024 / 4) - (2 * 8)))
5891 return -EINVAL;
5892 } else {
5893 /* If multiple tracers are disabled, to avoid deadlocks
5894 * maximum packet capture size of 9600 bytes is recommended.
5895 * Also in this mode, only trace0 can be enabled and running.
5896 */
5897 multitrc = 0;
5898 if (tp->snap_len > 9600 || idx)
5899 return -EINVAL;
5900 }
5901
5902 if (tp->port > (is_t4(adap->params.chip) ? 11 : 19) || tp->invert > 1 ||
5903 tp->skip_len > TFLENGTH_M || tp->skip_ofst > TFOFFSET_M ||
5904 tp->min_len > TFMINPKTSIZE_M)
5905 return -EINVAL;
5906
5907 /* stop the tracer we'll be changing */
5908 t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst, 0);
5909
5910 idx *= (MPS_TRC_FILTER1_MATCH_A - MPS_TRC_FILTER0_MATCH_A);
5911 data_reg = MPS_TRC_FILTER0_MATCH_A + idx;
5912 mask_reg = MPS_TRC_FILTER0_DONT_CARE_A + idx;
5913
5914 for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) {
5915 t4_write_reg(adap, data_reg, tp->data[i]);
5916 t4_write_reg(adap, mask_reg, ~tp->mask[i]);
5917 }
5918 t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_B_A + ofst,
5919 TFCAPTUREMAX_V(tp->snap_len) |
5920 TFMINPKTSIZE_V(tp->min_len));
5921 t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst,
5922 TFOFFSET_V(tp->skip_ofst) | TFLENGTH_V(tp->skip_len) |
5923 (is_t4(adap->params.chip) ?
5924 TFPORT_V(tp->port) | TFEN_F | TFINVERTMATCH_V(tp->invert) :
5925 T5_TFPORT_V(tp->port) | T5_TFEN_F |
5926 T5_TFINVERTMATCH_V(tp->invert)));
5927
5928 return 0;
5929 }
5930
5931 /**
5932 * t4_get_trace_filter - query one of the tracing filters
5933 * @adap: the adapter
5934 * @tp: the current trace filter parameters
5935 * @idx: which trace filter to query
5936 * @enabled: non-zero if the filter is enabled
5937 *
5938 * Returns the current settings of one of the HW tracing filters.
5939 */
t4_get_trace_filter(struct adapter * adap,struct trace_params * tp,int idx,int * enabled)5940 void t4_get_trace_filter(struct adapter *adap, struct trace_params *tp, int idx,
5941 int *enabled)
5942 {
5943 u32 ctla, ctlb;
5944 int i, ofst = idx * 4;
5945 u32 data_reg, mask_reg;
5946
5947 ctla = t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst);
5948 ctlb = t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_B_A + ofst);
5949
5950 if (is_t4(adap->params.chip)) {
5951 *enabled = !!(ctla & TFEN_F);
5952 tp->port = TFPORT_G(ctla);
5953 tp->invert = !!(ctla & TFINVERTMATCH_F);
5954 } else {
5955 *enabled = !!(ctla & T5_TFEN_F);
5956 tp->port = T5_TFPORT_G(ctla);
5957 tp->invert = !!(ctla & T5_TFINVERTMATCH_F);
5958 }
5959 tp->snap_len = TFCAPTUREMAX_G(ctlb);
5960 tp->min_len = TFMINPKTSIZE_G(ctlb);
5961 tp->skip_ofst = TFOFFSET_G(ctla);
5962 tp->skip_len = TFLENGTH_G(ctla);
5963
5964 ofst = (MPS_TRC_FILTER1_MATCH_A - MPS_TRC_FILTER0_MATCH_A) * idx;
5965 data_reg = MPS_TRC_FILTER0_MATCH_A + ofst;
5966 mask_reg = MPS_TRC_FILTER0_DONT_CARE_A + ofst;
5967
5968 for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) {
5969 tp->mask[i] = ~t4_read_reg(adap, mask_reg);
5970 tp->data[i] = t4_read_reg(adap, data_reg) & tp->mask[i];
5971 }
5972 }
5973
5974 /**
5975 * t4_pmtx_get_stats - returns the HW stats from PMTX
5976 * @adap: the adapter
5977 * @cnt: where to store the count statistics
5978 * @cycles: where to store the cycle statistics
5979 *
5980 * Returns performance statistics from PMTX.
5981 */
t4_pmtx_get_stats(struct adapter * adap,u32 cnt[],u64 cycles[])5982 void t4_pmtx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[])
5983 {
5984 int i;
5985 u32 data[2];
5986
5987 for (i = 0; i < adap->params.arch.pm_stats_cnt; i++) {
5988 t4_write_reg(adap, PM_TX_STAT_CONFIG_A, i + 1);
5989 cnt[i] = t4_read_reg(adap, PM_TX_STAT_COUNT_A);
5990 if (is_t4(adap->params.chip)) {
5991 cycles[i] = t4_read_reg64(adap, PM_TX_STAT_LSB_A);
5992 } else {
5993 t4_read_indirect(adap, PM_TX_DBG_CTRL_A,
5994 PM_TX_DBG_DATA_A, data, 2,
5995 PM_TX_DBG_STAT_MSB_A);
5996 cycles[i] = (((u64)data[0] << 32) | data[1]);
5997 }
5998 }
5999 }
6000
6001 /**
6002 * t4_pmrx_get_stats - returns the HW stats from PMRX
6003 * @adap: the adapter
6004 * @cnt: where to store the count statistics
6005 * @cycles: where to store the cycle statistics
6006 *
6007 * Returns performance statistics from PMRX.
6008 */
t4_pmrx_get_stats(struct adapter * adap,u32 cnt[],u64 cycles[])6009 void t4_pmrx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[])
6010 {
6011 int i;
6012 u32 data[2];
6013
6014 for (i = 0; i < adap->params.arch.pm_stats_cnt; i++) {
6015 t4_write_reg(adap, PM_RX_STAT_CONFIG_A, i + 1);
6016 cnt[i] = t4_read_reg(adap, PM_RX_STAT_COUNT_A);
6017 if (is_t4(adap->params.chip)) {
6018 cycles[i] = t4_read_reg64(adap, PM_RX_STAT_LSB_A);
6019 } else {
6020 t4_read_indirect(adap, PM_RX_DBG_CTRL_A,
6021 PM_RX_DBG_DATA_A, data, 2,
6022 PM_RX_DBG_STAT_MSB_A);
6023 cycles[i] = (((u64)data[0] << 32) | data[1]);
6024 }
6025 }
6026 }
6027
6028 /**
6029 * compute_mps_bg_map - compute the MPS Buffer Group Map for a Port
6030 * @adap: the adapter
6031 * @pidx: the port index
6032 *
6033 * Computes and returns a bitmap indicating which MPS buffer groups are
6034 * associated with the given Port. Bit i is set if buffer group i is
6035 * used by the Port.
6036 */
compute_mps_bg_map(struct adapter * adapter,int pidx)6037 static inline unsigned int compute_mps_bg_map(struct adapter *adapter,
6038 int pidx)
6039 {
6040 unsigned int chip_version, nports;
6041
6042 chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
6043 nports = 1 << NUMPORTS_G(t4_read_reg(adapter, MPS_CMN_CTL_A));
6044
6045 switch (chip_version) {
6046 case CHELSIO_T4:
6047 case CHELSIO_T5:
6048 switch (nports) {
6049 case 1: return 0xf;
6050 case 2: return 3 << (2 * pidx);
6051 case 4: return 1 << pidx;
6052 }
6053 break;
6054
6055 case CHELSIO_T6:
6056 switch (nports) {
6057 case 2: return 1 << (2 * pidx);
6058 }
6059 break;
6060 }
6061
6062 dev_err(adapter->pdev_dev, "Need MPS Buffer Group Map for Chip %0x, Nports %d\n",
6063 chip_version, nports);
6064
6065 return 0;
6066 }
6067
6068 /**
6069 * t4_get_mps_bg_map - return the buffer groups associated with a port
6070 * @adapter: the adapter
6071 * @pidx: the port index
6072 *
6073 * Returns a bitmap indicating which MPS buffer groups are associated
6074 * with the given Port. Bit i is set if buffer group i is used by the
6075 * Port.
6076 */
t4_get_mps_bg_map(struct adapter * adapter,int pidx)6077 unsigned int t4_get_mps_bg_map(struct adapter *adapter, int pidx)
6078 {
6079 u8 *mps_bg_map;
6080 unsigned int nports;
6081
6082 nports = 1 << NUMPORTS_G(t4_read_reg(adapter, MPS_CMN_CTL_A));
6083 if (pidx >= nports) {
6084 CH_WARN(adapter, "MPS Port Index %d >= Nports %d\n",
6085 pidx, nports);
6086 return 0;
6087 }
6088
6089 /* If we've already retrieved/computed this, just return the result.
6090 */
6091 mps_bg_map = adapter->params.mps_bg_map;
6092 if (mps_bg_map[pidx])
6093 return mps_bg_map[pidx];
6094
6095 /* Newer Firmware can tell us what the MPS Buffer Group Map is.
6096 * If we're talking to such Firmware, let it tell us. If the new
6097 * API isn't supported, revert back to old hardcoded way. The value
6098 * obtained from Firmware is encoded in below format:
6099 *
6100 * val = (( MPSBGMAP[Port 3] << 24 ) |
6101 * ( MPSBGMAP[Port 2] << 16 ) |
6102 * ( MPSBGMAP[Port 1] << 8 ) |
6103 * ( MPSBGMAP[Port 0] << 0 ))
6104 */
6105 if (adapter->flags & FW_OK) {
6106 u32 param, val;
6107 int ret;
6108
6109 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
6110 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_MPSBGMAP));
6111 ret = t4_query_params_ns(adapter, adapter->mbox, adapter->pf,
6112 0, 1, ¶m, &val);
6113 if (!ret) {
6114 int p;
6115
6116 /* Store the BG Map for all of the Ports in order to
6117 * avoid more calls to the Firmware in the future.
6118 */
6119 for (p = 0; p < MAX_NPORTS; p++, val >>= 8)
6120 mps_bg_map[p] = val & 0xff;
6121
6122 return mps_bg_map[pidx];
6123 }
6124 }
6125
6126 /* Either we're not talking to the Firmware or we're dealing with
6127 * older Firmware which doesn't support the new API to get the MPS
6128 * Buffer Group Map. Fall back to computing it ourselves.
6129 */
6130 mps_bg_map[pidx] = compute_mps_bg_map(adapter, pidx);
6131 return mps_bg_map[pidx];
6132 }
6133
6134 /**
6135 * t4_get_tp_ch_map - return TP ingress channels associated with a port
6136 * @adapter: the adapter
6137 * @pidx: the port index
6138 *
6139 * Returns a bitmap indicating which TP Ingress Channels are associated
6140 * with a given Port. Bit i is set if TP Ingress Channel i is used by
6141 * the Port.
6142 */
t4_get_tp_ch_map(struct adapter * adap,int pidx)6143 unsigned int t4_get_tp_ch_map(struct adapter *adap, int pidx)
6144 {
6145 unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
6146 unsigned int nports = 1 << NUMPORTS_G(t4_read_reg(adap, MPS_CMN_CTL_A));
6147
6148 if (pidx >= nports) {
6149 dev_warn(adap->pdev_dev, "TP Port Index %d >= Nports %d\n",
6150 pidx, nports);
6151 return 0;
6152 }
6153
6154 switch (chip_version) {
6155 case CHELSIO_T4:
6156 case CHELSIO_T5:
6157 /* Note that this happens to be the same values as the MPS
6158 * Buffer Group Map for these Chips. But we replicate the code
6159 * here because they're really separate concepts.
6160 */
6161 switch (nports) {
6162 case 1: return 0xf;
6163 case 2: return 3 << (2 * pidx);
6164 case 4: return 1 << pidx;
6165 }
6166 break;
6167
6168 case CHELSIO_T6:
6169 switch (nports) {
6170 case 1:
6171 case 2: return 1 << pidx;
6172 }
6173 break;
6174 }
6175
6176 dev_err(adap->pdev_dev, "Need TP Channel Map for Chip %0x, Nports %d\n",
6177 chip_version, nports);
6178 return 0;
6179 }
6180
6181 /**
6182 * t4_get_port_type_description - return Port Type string description
6183 * @port_type: firmware Port Type enumeration
6184 */
t4_get_port_type_description(enum fw_port_type port_type)6185 const char *t4_get_port_type_description(enum fw_port_type port_type)
6186 {
6187 static const char *const port_type_description[] = {
6188 "Fiber_XFI",
6189 "Fiber_XAUI",
6190 "BT_SGMII",
6191 "BT_XFI",
6192 "BT_XAUI",
6193 "KX4",
6194 "CX4",
6195 "KX",
6196 "KR",
6197 "SFP",
6198 "BP_AP",
6199 "BP4_AP",
6200 "QSFP_10G",
6201 "QSA",
6202 "QSFP",
6203 "BP40_BA",
6204 "KR4_100G",
6205 "CR4_QSFP",
6206 "CR_QSFP",
6207 "CR2_QSFP",
6208 "SFP28",
6209 "KR_SFP28",
6210 "KR_XLAUI"
6211 };
6212
6213 if (port_type < ARRAY_SIZE(port_type_description))
6214 return port_type_description[port_type];
6215 return "UNKNOWN";
6216 }
6217
6218 /**
6219 * t4_get_port_stats_offset - collect port stats relative to a previous
6220 * snapshot
6221 * @adap: The adapter
6222 * @idx: The port
6223 * @stats: Current stats to fill
6224 * @offset: Previous stats snapshot
6225 */
t4_get_port_stats_offset(struct adapter * adap,int idx,struct port_stats * stats,struct port_stats * offset)6226 void t4_get_port_stats_offset(struct adapter *adap, int idx,
6227 struct port_stats *stats,
6228 struct port_stats *offset)
6229 {
6230 u64 *s, *o;
6231 int i;
6232
6233 t4_get_port_stats(adap, idx, stats);
6234 for (i = 0, s = (u64 *)stats, o = (u64 *)offset;
6235 i < (sizeof(struct port_stats) / sizeof(u64));
6236 i++, s++, o++)
6237 *s -= *o;
6238 }
6239
6240 /**
6241 * t4_get_port_stats - collect port statistics
6242 * @adap: the adapter
6243 * @idx: the port index
6244 * @p: the stats structure to fill
6245 *
6246 * Collect statistics related to the given port from HW.
6247 */
t4_get_port_stats(struct adapter * adap,int idx,struct port_stats * p)6248 void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p)
6249 {
6250 u32 bgmap = t4_get_mps_bg_map(adap, idx);
6251 u32 stat_ctl = t4_read_reg(adap, MPS_STAT_CTL_A);
6252
6253 #define GET_STAT(name) \
6254 t4_read_reg64(adap, \
6255 (is_t4(adap->params.chip) ? PORT_REG(idx, MPS_PORT_STAT_##name##_L) : \
6256 T5_PORT_REG(idx, MPS_PORT_STAT_##name##_L)))
6257 #define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L)
6258
6259 p->tx_octets = GET_STAT(TX_PORT_BYTES);
6260 p->tx_frames = GET_STAT(TX_PORT_FRAMES);
6261 p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST);
6262 p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST);
6263 p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST);
6264 p->tx_error_frames = GET_STAT(TX_PORT_ERROR);
6265 p->tx_frames_64 = GET_STAT(TX_PORT_64B);
6266 p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B);
6267 p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B);
6268 p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B);
6269 p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B);
6270 p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B);
6271 p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX);
6272 p->tx_drop = GET_STAT(TX_PORT_DROP);
6273 p->tx_pause = GET_STAT(TX_PORT_PAUSE);
6274 p->tx_ppp0 = GET_STAT(TX_PORT_PPP0);
6275 p->tx_ppp1 = GET_STAT(TX_PORT_PPP1);
6276 p->tx_ppp2 = GET_STAT(TX_PORT_PPP2);
6277 p->tx_ppp3 = GET_STAT(TX_PORT_PPP3);
6278 p->tx_ppp4 = GET_STAT(TX_PORT_PPP4);
6279 p->tx_ppp5 = GET_STAT(TX_PORT_PPP5);
6280 p->tx_ppp6 = GET_STAT(TX_PORT_PPP6);
6281 p->tx_ppp7 = GET_STAT(TX_PORT_PPP7);
6282
6283 if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
6284 if (stat_ctl & COUNTPAUSESTATTX_F)
6285 p->tx_frames_64 -= p->tx_pause;
6286 if (stat_ctl & COUNTPAUSEMCTX_F)
6287 p->tx_mcast_frames -= p->tx_pause;
6288 }
6289 p->rx_octets = GET_STAT(RX_PORT_BYTES);
6290 p->rx_frames = GET_STAT(RX_PORT_FRAMES);
6291 p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST);
6292 p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST);
6293 p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST);
6294 p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR);
6295 p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR);
6296 p->rx_fcs_err = GET_STAT(RX_PORT_CRC_ERROR);
6297 p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR);
6298 p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR);
6299 p->rx_runt = GET_STAT(RX_PORT_LESS_64B);
6300 p->rx_frames_64 = GET_STAT(RX_PORT_64B);
6301 p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B);
6302 p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B);
6303 p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B);
6304 p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B);
6305 p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B);
6306 p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX);
6307 p->rx_pause = GET_STAT(RX_PORT_PAUSE);
6308 p->rx_ppp0 = GET_STAT(RX_PORT_PPP0);
6309 p->rx_ppp1 = GET_STAT(RX_PORT_PPP1);
6310 p->rx_ppp2 = GET_STAT(RX_PORT_PPP2);
6311 p->rx_ppp3 = GET_STAT(RX_PORT_PPP3);
6312 p->rx_ppp4 = GET_STAT(RX_PORT_PPP4);
6313 p->rx_ppp5 = GET_STAT(RX_PORT_PPP5);
6314 p->rx_ppp6 = GET_STAT(RX_PORT_PPP6);
6315 p->rx_ppp7 = GET_STAT(RX_PORT_PPP7);
6316
6317 if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
6318 if (stat_ctl & COUNTPAUSESTATRX_F)
6319 p->rx_frames_64 -= p->rx_pause;
6320 if (stat_ctl & COUNTPAUSEMCRX_F)
6321 p->rx_mcast_frames -= p->rx_pause;
6322 }
6323
6324 p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0;
6325 p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0;
6326 p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0;
6327 p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0;
6328 p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0;
6329 p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0;
6330 p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0;
6331 p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0;
6332
6333 #undef GET_STAT
6334 #undef GET_STAT_COM
6335 }
6336
6337 /**
6338 * t4_get_lb_stats - collect loopback port statistics
6339 * @adap: the adapter
6340 * @idx: the loopback port index
6341 * @p: the stats structure to fill
6342 *
6343 * Return HW statistics for the given loopback port.
6344 */
t4_get_lb_stats(struct adapter * adap,int idx,struct lb_port_stats * p)6345 void t4_get_lb_stats(struct adapter *adap, int idx, struct lb_port_stats *p)
6346 {
6347 u32 bgmap = t4_get_mps_bg_map(adap, idx);
6348
6349 #define GET_STAT(name) \
6350 t4_read_reg64(adap, \
6351 (is_t4(adap->params.chip) ? \
6352 PORT_REG(idx, MPS_PORT_STAT_LB_PORT_##name##_L) : \
6353 T5_PORT_REG(idx, MPS_PORT_STAT_LB_PORT_##name##_L)))
6354 #define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L)
6355
6356 p->octets = GET_STAT(BYTES);
6357 p->frames = GET_STAT(FRAMES);
6358 p->bcast_frames = GET_STAT(BCAST);
6359 p->mcast_frames = GET_STAT(MCAST);
6360 p->ucast_frames = GET_STAT(UCAST);
6361 p->error_frames = GET_STAT(ERROR);
6362
6363 p->frames_64 = GET_STAT(64B);
6364 p->frames_65_127 = GET_STAT(65B_127B);
6365 p->frames_128_255 = GET_STAT(128B_255B);
6366 p->frames_256_511 = GET_STAT(256B_511B);
6367 p->frames_512_1023 = GET_STAT(512B_1023B);
6368 p->frames_1024_1518 = GET_STAT(1024B_1518B);
6369 p->frames_1519_max = GET_STAT(1519B_MAX);
6370 p->drop = GET_STAT(DROP_FRAMES);
6371
6372 p->ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_DROP_FRAME) : 0;
6373 p->ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_DROP_FRAME) : 0;
6374 p->ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_DROP_FRAME) : 0;
6375 p->ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_DROP_FRAME) : 0;
6376 p->trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_TRUNC_FRAME) : 0;
6377 p->trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_TRUNC_FRAME) : 0;
6378 p->trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_TRUNC_FRAME) : 0;
6379 p->trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_TRUNC_FRAME) : 0;
6380
6381 #undef GET_STAT
6382 #undef GET_STAT_COM
6383 }
6384
6385 /* t4_mk_filtdelwr - create a delete filter WR
6386 * @ftid: the filter ID
6387 * @wr: the filter work request to populate
6388 * @qid: ingress queue to receive the delete notification
6389 *
6390 * Creates a filter work request to delete the supplied filter. If @qid is
6391 * negative the delete notification is suppressed.
6392 */
t4_mk_filtdelwr(unsigned int ftid,struct fw_filter_wr * wr,int qid)6393 void t4_mk_filtdelwr(unsigned int ftid, struct fw_filter_wr *wr, int qid)
6394 {
6395 memset(wr, 0, sizeof(*wr));
6396 wr->op_pkd = cpu_to_be32(FW_WR_OP_V(FW_FILTER_WR));
6397 wr->len16_pkd = cpu_to_be32(FW_WR_LEN16_V(sizeof(*wr) / 16));
6398 wr->tid_to_iq = cpu_to_be32(FW_FILTER_WR_TID_V(ftid) |
6399 FW_FILTER_WR_NOREPLY_V(qid < 0));
6400 wr->del_filter_to_l2tix = cpu_to_be32(FW_FILTER_WR_DEL_FILTER_F);
6401 if (qid >= 0)
6402 wr->rx_chan_rx_rpl_iq =
6403 cpu_to_be16(FW_FILTER_WR_RX_RPL_IQ_V(qid));
6404 }
6405
6406 #define INIT_CMD(var, cmd, rd_wr) do { \
6407 (var).op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_##cmd##_CMD) | \
6408 FW_CMD_REQUEST_F | \
6409 FW_CMD_##rd_wr##_F); \
6410 (var).retval_len16 = cpu_to_be32(FW_LEN16(var)); \
6411 } while (0)
6412
t4_fwaddrspace_write(struct adapter * adap,unsigned int mbox,u32 addr,u32 val)6413 int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox,
6414 u32 addr, u32 val)
6415 {
6416 u32 ldst_addrspace;
6417 struct fw_ldst_cmd c;
6418
6419 memset(&c, 0, sizeof(c));
6420 ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FIRMWARE);
6421 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
6422 FW_CMD_REQUEST_F |
6423 FW_CMD_WRITE_F |
6424 ldst_addrspace);
6425 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
6426 c.u.addrval.addr = cpu_to_be32(addr);
6427 c.u.addrval.val = cpu_to_be32(val);
6428
6429 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
6430 }
6431
6432 /**
6433 * t4_mdio_rd - read a PHY register through MDIO
6434 * @adap: the adapter
6435 * @mbox: mailbox to use for the FW command
6436 * @phy_addr: the PHY address
6437 * @mmd: the PHY MMD to access (0 for clause 22 PHYs)
6438 * @reg: the register to read
6439 * @valp: where to store the value
6440 *
6441 * Issues a FW command through the given mailbox to read a PHY register.
6442 */
t4_mdio_rd(struct adapter * adap,unsigned int mbox,unsigned int phy_addr,unsigned int mmd,unsigned int reg,u16 * valp)6443 int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
6444 unsigned int mmd, unsigned int reg, u16 *valp)
6445 {
6446 int ret;
6447 u32 ldst_addrspace;
6448 struct fw_ldst_cmd c;
6449
6450 memset(&c, 0, sizeof(c));
6451 ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_MDIO);
6452 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
6453 FW_CMD_REQUEST_F | FW_CMD_READ_F |
6454 ldst_addrspace);
6455 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
6456 c.u.mdio.paddr_mmd = cpu_to_be16(FW_LDST_CMD_PADDR_V(phy_addr) |
6457 FW_LDST_CMD_MMD_V(mmd));
6458 c.u.mdio.raddr = cpu_to_be16(reg);
6459
6460 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
6461 if (ret == 0)
6462 *valp = be16_to_cpu(c.u.mdio.rval);
6463 return ret;
6464 }
6465
6466 /**
6467 * t4_mdio_wr - write a PHY register through MDIO
6468 * @adap: the adapter
6469 * @mbox: mailbox to use for the FW command
6470 * @phy_addr: the PHY address
6471 * @mmd: the PHY MMD to access (0 for clause 22 PHYs)
6472 * @reg: the register to write
6473 * @valp: value to write
6474 *
6475 * Issues a FW command through the given mailbox to write a PHY register.
6476 */
t4_mdio_wr(struct adapter * adap,unsigned int mbox,unsigned int phy_addr,unsigned int mmd,unsigned int reg,u16 val)6477 int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
6478 unsigned int mmd, unsigned int reg, u16 val)
6479 {
6480 u32 ldst_addrspace;
6481 struct fw_ldst_cmd c;
6482
6483 memset(&c, 0, sizeof(c));
6484 ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_MDIO);
6485 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
6486 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
6487 ldst_addrspace);
6488 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
6489 c.u.mdio.paddr_mmd = cpu_to_be16(FW_LDST_CMD_PADDR_V(phy_addr) |
6490 FW_LDST_CMD_MMD_V(mmd));
6491 c.u.mdio.raddr = cpu_to_be16(reg);
6492 c.u.mdio.rval = cpu_to_be16(val);
6493
6494 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
6495 }
6496
6497 /**
6498 * t4_sge_decode_idma_state - decode the idma state
6499 * @adap: the adapter
6500 * @state: the state idma is stuck in
6501 */
t4_sge_decode_idma_state(struct adapter * adapter,int state)6502 void t4_sge_decode_idma_state(struct adapter *adapter, int state)
6503 {
6504 static const char * const t4_decode[] = {
6505 "IDMA_IDLE",
6506 "IDMA_PUSH_MORE_CPL_FIFO",
6507 "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
6508 "Not used",
6509 "IDMA_PHYSADDR_SEND_PCIEHDR",
6510 "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
6511 "IDMA_PHYSADDR_SEND_PAYLOAD",
6512 "IDMA_SEND_FIFO_TO_IMSG",
6513 "IDMA_FL_REQ_DATA_FL_PREP",
6514 "IDMA_FL_REQ_DATA_FL",
6515 "IDMA_FL_DROP",
6516 "IDMA_FL_H_REQ_HEADER_FL",
6517 "IDMA_FL_H_SEND_PCIEHDR",
6518 "IDMA_FL_H_PUSH_CPL_FIFO",
6519 "IDMA_FL_H_SEND_CPL",
6520 "IDMA_FL_H_SEND_IP_HDR_FIRST",
6521 "IDMA_FL_H_SEND_IP_HDR",
6522 "IDMA_FL_H_REQ_NEXT_HEADER_FL",
6523 "IDMA_FL_H_SEND_NEXT_PCIEHDR",
6524 "IDMA_FL_H_SEND_IP_HDR_PADDING",
6525 "IDMA_FL_D_SEND_PCIEHDR",
6526 "IDMA_FL_D_SEND_CPL_AND_IP_HDR",
6527 "IDMA_FL_D_REQ_NEXT_DATA_FL",
6528 "IDMA_FL_SEND_PCIEHDR",
6529 "IDMA_FL_PUSH_CPL_FIFO",
6530 "IDMA_FL_SEND_CPL",
6531 "IDMA_FL_SEND_PAYLOAD_FIRST",
6532 "IDMA_FL_SEND_PAYLOAD",
6533 "IDMA_FL_REQ_NEXT_DATA_FL",
6534 "IDMA_FL_SEND_NEXT_PCIEHDR",
6535 "IDMA_FL_SEND_PADDING",
6536 "IDMA_FL_SEND_COMPLETION_TO_IMSG",
6537 "IDMA_FL_SEND_FIFO_TO_IMSG",
6538 "IDMA_FL_REQ_DATAFL_DONE",
6539 "IDMA_FL_REQ_HEADERFL_DONE",
6540 };
6541 static const char * const t5_decode[] = {
6542 "IDMA_IDLE",
6543 "IDMA_ALMOST_IDLE",
6544 "IDMA_PUSH_MORE_CPL_FIFO",
6545 "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
6546 "IDMA_SGEFLRFLUSH_SEND_PCIEHDR",
6547 "IDMA_PHYSADDR_SEND_PCIEHDR",
6548 "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
6549 "IDMA_PHYSADDR_SEND_PAYLOAD",
6550 "IDMA_SEND_FIFO_TO_IMSG",
6551 "IDMA_FL_REQ_DATA_FL",
6552 "IDMA_FL_DROP",
6553 "IDMA_FL_DROP_SEND_INC",
6554 "IDMA_FL_H_REQ_HEADER_FL",
6555 "IDMA_FL_H_SEND_PCIEHDR",
6556 "IDMA_FL_H_PUSH_CPL_FIFO",
6557 "IDMA_FL_H_SEND_CPL",
6558 "IDMA_FL_H_SEND_IP_HDR_FIRST",
6559 "IDMA_FL_H_SEND_IP_HDR",
6560 "IDMA_FL_H_REQ_NEXT_HEADER_FL",
6561 "IDMA_FL_H_SEND_NEXT_PCIEHDR",
6562 "IDMA_FL_H_SEND_IP_HDR_PADDING",
6563 "IDMA_FL_D_SEND_PCIEHDR",
6564 "IDMA_FL_D_SEND_CPL_AND_IP_HDR",
6565 "IDMA_FL_D_REQ_NEXT_DATA_FL",
6566 "IDMA_FL_SEND_PCIEHDR",
6567 "IDMA_FL_PUSH_CPL_FIFO",
6568 "IDMA_FL_SEND_CPL",
6569 "IDMA_FL_SEND_PAYLOAD_FIRST",
6570 "IDMA_FL_SEND_PAYLOAD",
6571 "IDMA_FL_REQ_NEXT_DATA_FL",
6572 "IDMA_FL_SEND_NEXT_PCIEHDR",
6573 "IDMA_FL_SEND_PADDING",
6574 "IDMA_FL_SEND_COMPLETION_TO_IMSG",
6575 };
6576 static const char * const t6_decode[] = {
6577 "IDMA_IDLE",
6578 "IDMA_PUSH_MORE_CPL_FIFO",
6579 "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
6580 "IDMA_SGEFLRFLUSH_SEND_PCIEHDR",
6581 "IDMA_PHYSADDR_SEND_PCIEHDR",
6582 "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
6583 "IDMA_PHYSADDR_SEND_PAYLOAD",
6584 "IDMA_FL_REQ_DATA_FL",
6585 "IDMA_FL_DROP",
6586 "IDMA_FL_DROP_SEND_INC",
6587 "IDMA_FL_H_REQ_HEADER_FL",
6588 "IDMA_FL_H_SEND_PCIEHDR",
6589 "IDMA_FL_H_PUSH_CPL_FIFO",
6590 "IDMA_FL_H_SEND_CPL",
6591 "IDMA_FL_H_SEND_IP_HDR_FIRST",
6592 "IDMA_FL_H_SEND_IP_HDR",
6593 "IDMA_FL_H_REQ_NEXT_HEADER_FL",
6594 "IDMA_FL_H_SEND_NEXT_PCIEHDR",
6595 "IDMA_FL_H_SEND_IP_HDR_PADDING",
6596 "IDMA_FL_D_SEND_PCIEHDR",
6597 "IDMA_FL_D_SEND_CPL_AND_IP_HDR",
6598 "IDMA_FL_D_REQ_NEXT_DATA_FL",
6599 "IDMA_FL_SEND_PCIEHDR",
6600 "IDMA_FL_PUSH_CPL_FIFO",
6601 "IDMA_FL_SEND_CPL",
6602 "IDMA_FL_SEND_PAYLOAD_FIRST",
6603 "IDMA_FL_SEND_PAYLOAD",
6604 "IDMA_FL_REQ_NEXT_DATA_FL",
6605 "IDMA_FL_SEND_NEXT_PCIEHDR",
6606 "IDMA_FL_SEND_PADDING",
6607 "IDMA_FL_SEND_COMPLETION_TO_IMSG",
6608 };
6609 static const u32 sge_regs[] = {
6610 SGE_DEBUG_DATA_LOW_INDEX_2_A,
6611 SGE_DEBUG_DATA_LOW_INDEX_3_A,
6612 SGE_DEBUG_DATA_HIGH_INDEX_10_A,
6613 };
6614 const char **sge_idma_decode;
6615 int sge_idma_decode_nstates;
6616 int i;
6617 unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
6618
6619 /* Select the right set of decode strings to dump depending on the
6620 * adapter chip type.
6621 */
6622 switch (chip_version) {
6623 case CHELSIO_T4:
6624 sge_idma_decode = (const char **)t4_decode;
6625 sge_idma_decode_nstates = ARRAY_SIZE(t4_decode);
6626 break;
6627
6628 case CHELSIO_T5:
6629 sge_idma_decode = (const char **)t5_decode;
6630 sge_idma_decode_nstates = ARRAY_SIZE(t5_decode);
6631 break;
6632
6633 case CHELSIO_T6:
6634 sge_idma_decode = (const char **)t6_decode;
6635 sge_idma_decode_nstates = ARRAY_SIZE(t6_decode);
6636 break;
6637
6638 default:
6639 dev_err(adapter->pdev_dev,
6640 "Unsupported chip version %d\n", chip_version);
6641 return;
6642 }
6643
6644 if (is_t4(adapter->params.chip)) {
6645 sge_idma_decode = (const char **)t4_decode;
6646 sge_idma_decode_nstates = ARRAY_SIZE(t4_decode);
6647 } else {
6648 sge_idma_decode = (const char **)t5_decode;
6649 sge_idma_decode_nstates = ARRAY_SIZE(t5_decode);
6650 }
6651
6652 if (state < sge_idma_decode_nstates)
6653 CH_WARN(adapter, "idma state %s\n", sge_idma_decode[state]);
6654 else
6655 CH_WARN(adapter, "idma state %d unknown\n", state);
6656
6657 for (i = 0; i < ARRAY_SIZE(sge_regs); i++)
6658 CH_WARN(adapter, "SGE register %#x value %#x\n",
6659 sge_regs[i], t4_read_reg(adapter, sge_regs[i]));
6660 }
6661
6662 /**
6663 * t4_sge_ctxt_flush - flush the SGE context cache
6664 * @adap: the adapter
6665 * @mbox: mailbox to use for the FW command
6666 * @ctx_type: Egress or Ingress
6667 *
6668 * Issues a FW command through the given mailbox to flush the
6669 * SGE context cache.
6670 */
t4_sge_ctxt_flush(struct adapter * adap,unsigned int mbox,int ctxt_type)6671 int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox, int ctxt_type)
6672 {
6673 int ret;
6674 u32 ldst_addrspace;
6675 struct fw_ldst_cmd c;
6676
6677 memset(&c, 0, sizeof(c));
6678 ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(ctxt_type == CTXT_EGRESS ?
6679 FW_LDST_ADDRSPC_SGE_EGRC :
6680 FW_LDST_ADDRSPC_SGE_INGC);
6681 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
6682 FW_CMD_REQUEST_F | FW_CMD_READ_F |
6683 ldst_addrspace);
6684 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
6685 c.u.idctxt.msg_ctxtflush = cpu_to_be32(FW_LDST_CMD_CTXTFLUSH_F);
6686
6687 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
6688 return ret;
6689 }
6690
6691 /**
6692 * t4_fw_hello - establish communication with FW
6693 * @adap: the adapter
6694 * @mbox: mailbox to use for the FW command
6695 * @evt_mbox: mailbox to receive async FW events
6696 * @master: specifies the caller's willingness to be the device master
6697 * @state: returns the current device state (if non-NULL)
6698 *
6699 * Issues a command to establish communication with FW. Returns either
6700 * an error (negative integer) or the mailbox of the Master PF.
6701 */
t4_fw_hello(struct adapter * adap,unsigned int mbox,unsigned int evt_mbox,enum dev_master master,enum dev_state * state)6702 int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox,
6703 enum dev_master master, enum dev_state *state)
6704 {
6705 int ret;
6706 struct fw_hello_cmd c;
6707 u32 v;
6708 unsigned int master_mbox;
6709 int retries = FW_CMD_HELLO_RETRIES;
6710
6711 retry:
6712 memset(&c, 0, sizeof(c));
6713 INIT_CMD(c, HELLO, WRITE);
6714 c.err_to_clearinit = cpu_to_be32(
6715 FW_HELLO_CMD_MASTERDIS_V(master == MASTER_CANT) |
6716 FW_HELLO_CMD_MASTERFORCE_V(master == MASTER_MUST) |
6717 FW_HELLO_CMD_MBMASTER_V(master == MASTER_MUST ?
6718 mbox : FW_HELLO_CMD_MBMASTER_M) |
6719 FW_HELLO_CMD_MBASYNCNOT_V(evt_mbox) |
6720 FW_HELLO_CMD_STAGE_V(fw_hello_cmd_stage_os) |
6721 FW_HELLO_CMD_CLEARINIT_F);
6722
6723 /*
6724 * Issue the HELLO command to the firmware. If it's not successful
6725 * but indicates that we got a "busy" or "timeout" condition, retry
6726 * the HELLO until we exhaust our retry limit. If we do exceed our
6727 * retry limit, check to see if the firmware left us any error
6728 * information and report that if so.
6729 */
6730 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
6731 if (ret < 0) {
6732 if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0)
6733 goto retry;
6734 if (t4_read_reg(adap, PCIE_FW_A) & PCIE_FW_ERR_F)
6735 t4_report_fw_error(adap);
6736 return ret;
6737 }
6738
6739 v = be32_to_cpu(c.err_to_clearinit);
6740 master_mbox = FW_HELLO_CMD_MBMASTER_G(v);
6741 if (state) {
6742 if (v & FW_HELLO_CMD_ERR_F)
6743 *state = DEV_STATE_ERR;
6744 else if (v & FW_HELLO_CMD_INIT_F)
6745 *state = DEV_STATE_INIT;
6746 else
6747 *state = DEV_STATE_UNINIT;
6748 }
6749
6750 /*
6751 * If we're not the Master PF then we need to wait around for the
6752 * Master PF Driver to finish setting up the adapter.
6753 *
6754 * Note that we also do this wait if we're a non-Master-capable PF and
6755 * there is no current Master PF; a Master PF may show up momentarily
6756 * and we wouldn't want to fail pointlessly. (This can happen when an
6757 * OS loads lots of different drivers rapidly at the same time). In
6758 * this case, the Master PF returned by the firmware will be
6759 * PCIE_FW_MASTER_M so the test below will work ...
6760 */
6761 if ((v & (FW_HELLO_CMD_ERR_F|FW_HELLO_CMD_INIT_F)) == 0 &&
6762 master_mbox != mbox) {
6763 int waiting = FW_CMD_HELLO_TIMEOUT;
6764
6765 /*
6766 * Wait for the firmware to either indicate an error or
6767 * initialized state. If we see either of these we bail out
6768 * and report the issue to the caller. If we exhaust the
6769 * "hello timeout" and we haven't exhausted our retries, try
6770 * again. Otherwise bail with a timeout error.
6771 */
6772 for (;;) {
6773 u32 pcie_fw;
6774
6775 msleep(50);
6776 waiting -= 50;
6777
6778 /*
6779 * If neither Error nor Initialialized are indicated
6780 * by the firmware keep waiting till we exaust our
6781 * timeout ... and then retry if we haven't exhausted
6782 * our retries ...
6783 */
6784 pcie_fw = t4_read_reg(adap, PCIE_FW_A);
6785 if (!(pcie_fw & (PCIE_FW_ERR_F|PCIE_FW_INIT_F))) {
6786 if (waiting <= 0) {
6787 if (retries-- > 0)
6788 goto retry;
6789
6790 return -ETIMEDOUT;
6791 }
6792 continue;
6793 }
6794
6795 /*
6796 * We either have an Error or Initialized condition
6797 * report errors preferentially.
6798 */
6799 if (state) {
6800 if (pcie_fw & PCIE_FW_ERR_F)
6801 *state = DEV_STATE_ERR;
6802 else if (pcie_fw & PCIE_FW_INIT_F)
6803 *state = DEV_STATE_INIT;
6804 }
6805
6806 /*
6807 * If we arrived before a Master PF was selected and
6808 * there's not a valid Master PF, grab its identity
6809 * for our caller.
6810 */
6811 if (master_mbox == PCIE_FW_MASTER_M &&
6812 (pcie_fw & PCIE_FW_MASTER_VLD_F))
6813 master_mbox = PCIE_FW_MASTER_G(pcie_fw);
6814 break;
6815 }
6816 }
6817
6818 return master_mbox;
6819 }
6820
6821 /**
6822 * t4_fw_bye - end communication with FW
6823 * @adap: the adapter
6824 * @mbox: mailbox to use for the FW command
6825 *
6826 * Issues a command to terminate communication with FW.
6827 */
t4_fw_bye(struct adapter * adap,unsigned int mbox)6828 int t4_fw_bye(struct adapter *adap, unsigned int mbox)
6829 {
6830 struct fw_bye_cmd c;
6831
6832 memset(&c, 0, sizeof(c));
6833 INIT_CMD(c, BYE, WRITE);
6834 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
6835 }
6836
6837 /**
6838 * t4_init_cmd - ask FW to initialize the device
6839 * @adap: the adapter
6840 * @mbox: mailbox to use for the FW command
6841 *
6842 * Issues a command to FW to partially initialize the device. This
6843 * performs initialization that generally doesn't depend on user input.
6844 */
t4_early_init(struct adapter * adap,unsigned int mbox)6845 int t4_early_init(struct adapter *adap, unsigned int mbox)
6846 {
6847 struct fw_initialize_cmd c;
6848
6849 memset(&c, 0, sizeof(c));
6850 INIT_CMD(c, INITIALIZE, WRITE);
6851 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
6852 }
6853
6854 /**
6855 * t4_fw_reset - issue a reset to FW
6856 * @adap: the adapter
6857 * @mbox: mailbox to use for the FW command
6858 * @reset: specifies the type of reset to perform
6859 *
6860 * Issues a reset command of the specified type to FW.
6861 */
t4_fw_reset(struct adapter * adap,unsigned int mbox,int reset)6862 int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset)
6863 {
6864 struct fw_reset_cmd c;
6865
6866 memset(&c, 0, sizeof(c));
6867 INIT_CMD(c, RESET, WRITE);
6868 c.val = cpu_to_be32(reset);
6869 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
6870 }
6871
6872 /**
6873 * t4_fw_halt - issue a reset/halt to FW and put uP into RESET
6874 * @adap: the adapter
6875 * @mbox: mailbox to use for the FW RESET command (if desired)
6876 * @force: force uP into RESET even if FW RESET command fails
6877 *
6878 * Issues a RESET command to firmware (if desired) with a HALT indication
6879 * and then puts the microprocessor into RESET state. The RESET command
6880 * will only be issued if a legitimate mailbox is provided (mbox <=
6881 * PCIE_FW_MASTER_M).
6882 *
6883 * This is generally used in order for the host to safely manipulate the
6884 * adapter without fear of conflicting with whatever the firmware might
6885 * be doing. The only way out of this state is to RESTART the firmware
6886 * ...
6887 */
t4_fw_halt(struct adapter * adap,unsigned int mbox,int force)6888 static int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force)
6889 {
6890 int ret = 0;
6891
6892 /*
6893 * If a legitimate mailbox is provided, issue a RESET command
6894 * with a HALT indication.
6895 */
6896 if (mbox <= PCIE_FW_MASTER_M) {
6897 struct fw_reset_cmd c;
6898
6899 memset(&c, 0, sizeof(c));
6900 INIT_CMD(c, RESET, WRITE);
6901 c.val = cpu_to_be32(PIORST_F | PIORSTMODE_F);
6902 c.halt_pkd = cpu_to_be32(FW_RESET_CMD_HALT_F);
6903 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
6904 }
6905
6906 /*
6907 * Normally we won't complete the operation if the firmware RESET
6908 * command fails but if our caller insists we'll go ahead and put the
6909 * uP into RESET. This can be useful if the firmware is hung or even
6910 * missing ... We'll have to take the risk of putting the uP into
6911 * RESET without the cooperation of firmware in that case.
6912 *
6913 * We also force the firmware's HALT flag to be on in case we bypassed
6914 * the firmware RESET command above or we're dealing with old firmware
6915 * which doesn't have the HALT capability. This will serve as a flag
6916 * for the incoming firmware to know that it's coming out of a HALT
6917 * rather than a RESET ... if it's new enough to understand that ...
6918 */
6919 if (ret == 0 || force) {
6920 t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, UPCRST_F);
6921 t4_set_reg_field(adap, PCIE_FW_A, PCIE_FW_HALT_F,
6922 PCIE_FW_HALT_F);
6923 }
6924
6925 /*
6926 * And we always return the result of the firmware RESET command
6927 * even when we force the uP into RESET ...
6928 */
6929 return ret;
6930 }
6931
6932 /**
6933 * t4_fw_restart - restart the firmware by taking the uP out of RESET
6934 * @adap: the adapter
6935 * @reset: if we want to do a RESET to restart things
6936 *
6937 * Restart firmware previously halted by t4_fw_halt(). On successful
6938 * return the previous PF Master remains as the new PF Master and there
6939 * is no need to issue a new HELLO command, etc.
6940 *
6941 * We do this in two ways:
6942 *
6943 * 1. If we're dealing with newer firmware we'll simply want to take
6944 * the chip's microprocessor out of RESET. This will cause the
6945 * firmware to start up from its start vector. And then we'll loop
6946 * until the firmware indicates it's started again (PCIE_FW.HALT
6947 * reset to 0) or we timeout.
6948 *
6949 * 2. If we're dealing with older firmware then we'll need to RESET
6950 * the chip since older firmware won't recognize the PCIE_FW.HALT
6951 * flag and automatically RESET itself on startup.
6952 */
t4_fw_restart(struct adapter * adap,unsigned int mbox,int reset)6953 static int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset)
6954 {
6955 if (reset) {
6956 /*
6957 * Since we're directing the RESET instead of the firmware
6958 * doing it automatically, we need to clear the PCIE_FW.HALT
6959 * bit.
6960 */
6961 t4_set_reg_field(adap, PCIE_FW_A, PCIE_FW_HALT_F, 0);
6962
6963 /*
6964 * If we've been given a valid mailbox, first try to get the
6965 * firmware to do the RESET. If that works, great and we can
6966 * return success. Otherwise, if we haven't been given a
6967 * valid mailbox or the RESET command failed, fall back to
6968 * hitting the chip with a hammer.
6969 */
6970 if (mbox <= PCIE_FW_MASTER_M) {
6971 t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, 0);
6972 msleep(100);
6973 if (t4_fw_reset(adap, mbox,
6974 PIORST_F | PIORSTMODE_F) == 0)
6975 return 0;
6976 }
6977
6978 t4_write_reg(adap, PL_RST_A, PIORST_F | PIORSTMODE_F);
6979 msleep(2000);
6980 } else {
6981 int ms;
6982
6983 t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, 0);
6984 for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) {
6985 if (!(t4_read_reg(adap, PCIE_FW_A) & PCIE_FW_HALT_F))
6986 return 0;
6987 msleep(100);
6988 ms += 100;
6989 }
6990 return -ETIMEDOUT;
6991 }
6992 return 0;
6993 }
6994
6995 /**
6996 * t4_fw_upgrade - perform all of the steps necessary to upgrade FW
6997 * @adap: the adapter
6998 * @mbox: mailbox to use for the FW RESET command (if desired)
6999 * @fw_data: the firmware image to write
7000 * @size: image size
7001 * @force: force upgrade even if firmware doesn't cooperate
7002 *
7003 * Perform all of the steps necessary for upgrading an adapter's
7004 * firmware image. Normally this requires the cooperation of the
7005 * existing firmware in order to halt all existing activities
7006 * but if an invalid mailbox token is passed in we skip that step
7007 * (though we'll still put the adapter microprocessor into RESET in
7008 * that case).
7009 *
7010 * On successful return the new firmware will have been loaded and
7011 * the adapter will have been fully RESET losing all previous setup
7012 * state. On unsuccessful return the adapter may be completely hosed ...
7013 * positive errno indicates that the adapter is ~probably~ intact, a
7014 * negative errno indicates that things are looking bad ...
7015 */
t4_fw_upgrade(struct adapter * adap,unsigned int mbox,const u8 * fw_data,unsigned int size,int force)7016 int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
7017 const u8 *fw_data, unsigned int size, int force)
7018 {
7019 const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data;
7020 int reset, ret;
7021
7022 if (!t4_fw_matches_chip(adap, fw_hdr))
7023 return -EINVAL;
7024
7025 /* Disable FW_OK flag so that mbox commands with FW_OK flag set
7026 * wont be sent when we are flashing FW.
7027 */
7028 adap->flags &= ~FW_OK;
7029
7030 ret = t4_fw_halt(adap, mbox, force);
7031 if (ret < 0 && !force)
7032 goto out;
7033
7034 ret = t4_load_fw(adap, fw_data, size);
7035 if (ret < 0)
7036 goto out;
7037
7038 /*
7039 * If there was a Firmware Configuration File stored in FLASH,
7040 * there's a good chance that it won't be compatible with the new
7041 * Firmware. In order to prevent difficult to diagnose adapter
7042 * initialization issues, we clear out the Firmware Configuration File
7043 * portion of the FLASH . The user will need to re-FLASH a new
7044 * Firmware Configuration File which is compatible with the new
7045 * Firmware if that's desired.
7046 */
7047 (void)t4_load_cfg(adap, NULL, 0);
7048
7049 /*
7050 * Older versions of the firmware don't understand the new
7051 * PCIE_FW.HALT flag and so won't know to perform a RESET when they
7052 * restart. So for newly loaded older firmware we'll have to do the
7053 * RESET for it so it starts up on a clean slate. We can tell if
7054 * the newly loaded firmware will handle this right by checking
7055 * its header flags to see if it advertises the capability.
7056 */
7057 reset = ((be32_to_cpu(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0);
7058 ret = t4_fw_restart(adap, mbox, reset);
7059
7060 /* Grab potentially new Firmware Device Log parameters so we can see
7061 * how healthy the new Firmware is. It's okay to contact the new
7062 * Firmware for these parameters even though, as far as it's
7063 * concerned, we've never said "HELLO" to it ...
7064 */
7065 (void)t4_init_devlog_params(adap);
7066 out:
7067 adap->flags |= FW_OK;
7068 return ret;
7069 }
7070
7071 /**
7072 * t4_fl_pkt_align - return the fl packet alignment
7073 * @adap: the adapter
7074 *
7075 * T4 has a single field to specify the packing and padding boundary.
7076 * T5 onwards has separate fields for this and hence the alignment for
7077 * next packet offset is maximum of these two.
7078 *
7079 */
t4_fl_pkt_align(struct adapter * adap)7080 int t4_fl_pkt_align(struct adapter *adap)
7081 {
7082 u32 sge_control, sge_control2;
7083 unsigned int ingpadboundary, ingpackboundary, fl_align, ingpad_shift;
7084
7085 sge_control = t4_read_reg(adap, SGE_CONTROL_A);
7086
7087 /* T4 uses a single control field to specify both the PCIe Padding and
7088 * Packing Boundary. T5 introduced the ability to specify these
7089 * separately. The actual Ingress Packet Data alignment boundary
7090 * within Packed Buffer Mode is the maximum of these two
7091 * specifications. (Note that it makes no real practical sense to
7092 * have the Pading Boudary be larger than the Packing Boundary but you
7093 * could set the chip up that way and, in fact, legacy T4 code would
7094 * end doing this because it would initialize the Padding Boundary and
7095 * leave the Packing Boundary initialized to 0 (16 bytes).)
7096 * Padding Boundary values in T6 starts from 8B,
7097 * where as it is 32B for T4 and T5.
7098 */
7099 if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
7100 ingpad_shift = INGPADBOUNDARY_SHIFT_X;
7101 else
7102 ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X;
7103
7104 ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_control) + ingpad_shift);
7105
7106 fl_align = ingpadboundary;
7107 if (!is_t4(adap->params.chip)) {
7108 /* T5 has a weird interpretation of one of the PCIe Packing
7109 * Boundary values. No idea why ...
7110 */
7111 sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A);
7112 ingpackboundary = INGPACKBOUNDARY_G(sge_control2);
7113 if (ingpackboundary == INGPACKBOUNDARY_16B_X)
7114 ingpackboundary = 16;
7115 else
7116 ingpackboundary = 1 << (ingpackboundary +
7117 INGPACKBOUNDARY_SHIFT_X);
7118
7119 fl_align = max(ingpadboundary, ingpackboundary);
7120 }
7121 return fl_align;
7122 }
7123
7124 /**
7125 * t4_fixup_host_params - fix up host-dependent parameters
7126 * @adap: the adapter
7127 * @page_size: the host's Base Page Size
7128 * @cache_line_size: the host's Cache Line Size
7129 *
7130 * Various registers in T4 contain values which are dependent on the
7131 * host's Base Page and Cache Line Sizes. This function will fix all of
7132 * those registers with the appropriate values as passed in ...
7133 */
t4_fixup_host_params(struct adapter * adap,unsigned int page_size,unsigned int cache_line_size)7134 int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
7135 unsigned int cache_line_size)
7136 {
7137 unsigned int page_shift = fls(page_size) - 1;
7138 unsigned int sge_hps = page_shift - 10;
7139 unsigned int stat_len = cache_line_size > 64 ? 128 : 64;
7140 unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size;
7141 unsigned int fl_align_log = fls(fl_align) - 1;
7142
7143 t4_write_reg(adap, SGE_HOST_PAGE_SIZE_A,
7144 HOSTPAGESIZEPF0_V(sge_hps) |
7145 HOSTPAGESIZEPF1_V(sge_hps) |
7146 HOSTPAGESIZEPF2_V(sge_hps) |
7147 HOSTPAGESIZEPF3_V(sge_hps) |
7148 HOSTPAGESIZEPF4_V(sge_hps) |
7149 HOSTPAGESIZEPF5_V(sge_hps) |
7150 HOSTPAGESIZEPF6_V(sge_hps) |
7151 HOSTPAGESIZEPF7_V(sge_hps));
7152
7153 if (is_t4(adap->params.chip)) {
7154 t4_set_reg_field(adap, SGE_CONTROL_A,
7155 INGPADBOUNDARY_V(INGPADBOUNDARY_M) |
7156 EGRSTATUSPAGESIZE_F,
7157 INGPADBOUNDARY_V(fl_align_log -
7158 INGPADBOUNDARY_SHIFT_X) |
7159 EGRSTATUSPAGESIZE_V(stat_len != 64));
7160 } else {
7161 unsigned int pack_align;
7162 unsigned int ingpad, ingpack;
7163 unsigned int pcie_cap;
7164
7165 /* T5 introduced the separation of the Free List Padding and
7166 * Packing Boundaries. Thus, we can select a smaller Padding
7167 * Boundary to avoid uselessly chewing up PCIe Link and Memory
7168 * Bandwidth, and use a Packing Boundary which is large enough
7169 * to avoid false sharing between CPUs, etc.
7170 *
7171 * For the PCI Link, the smaller the Padding Boundary the
7172 * better. For the Memory Controller, a smaller Padding
7173 * Boundary is better until we cross under the Memory Line
7174 * Size (the minimum unit of transfer to/from Memory). If we
7175 * have a Padding Boundary which is smaller than the Memory
7176 * Line Size, that'll involve a Read-Modify-Write cycle on the
7177 * Memory Controller which is never good.
7178 */
7179
7180 /* We want the Packing Boundary to be based on the Cache Line
7181 * Size in order to help avoid False Sharing performance
7182 * issues between CPUs, etc. We also want the Packing
7183 * Boundary to incorporate the PCI-E Maximum Payload Size. We
7184 * get best performance when the Packing Boundary is a
7185 * multiple of the Maximum Payload Size.
7186 */
7187 pack_align = fl_align;
7188 pcie_cap = pci_find_capability(adap->pdev, PCI_CAP_ID_EXP);
7189 if (pcie_cap) {
7190 unsigned int mps, mps_log;
7191 u16 devctl;
7192
7193 /* The PCIe Device Control Maximum Payload Size field
7194 * [bits 7:5] encodes sizes as powers of 2 starting at
7195 * 128 bytes.
7196 */
7197 pci_read_config_word(adap->pdev,
7198 pcie_cap + PCI_EXP_DEVCTL,
7199 &devctl);
7200 mps_log = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5) + 7;
7201 mps = 1 << mps_log;
7202 if (mps > pack_align)
7203 pack_align = mps;
7204 }
7205
7206 /* N.B. T5/T6 have a crazy special interpretation of the "0"
7207 * value for the Packing Boundary. This corresponds to 16
7208 * bytes instead of the expected 32 bytes. So if we want 32
7209 * bytes, the best we can really do is 64 bytes ...
7210 */
7211 if (pack_align <= 16) {
7212 ingpack = INGPACKBOUNDARY_16B_X;
7213 fl_align = 16;
7214 } else if (pack_align == 32) {
7215 ingpack = INGPACKBOUNDARY_64B_X;
7216 fl_align = 64;
7217 } else {
7218 unsigned int pack_align_log = fls(pack_align) - 1;
7219
7220 ingpack = pack_align_log - INGPACKBOUNDARY_SHIFT_X;
7221 fl_align = pack_align;
7222 }
7223
7224 /* Use the smallest Ingress Padding which isn't smaller than
7225 * the Memory Controller Read/Write Size. We'll take that as
7226 * being 8 bytes since we don't know of any system with a
7227 * wider Memory Controller Bus Width.
7228 */
7229 if (is_t5(adap->params.chip))
7230 ingpad = INGPADBOUNDARY_32B_X;
7231 else
7232 ingpad = T6_INGPADBOUNDARY_8B_X;
7233
7234 t4_set_reg_field(adap, SGE_CONTROL_A,
7235 INGPADBOUNDARY_V(INGPADBOUNDARY_M) |
7236 EGRSTATUSPAGESIZE_F,
7237 INGPADBOUNDARY_V(ingpad) |
7238 EGRSTATUSPAGESIZE_V(stat_len != 64));
7239 t4_set_reg_field(adap, SGE_CONTROL2_A,
7240 INGPACKBOUNDARY_V(INGPACKBOUNDARY_M),
7241 INGPACKBOUNDARY_V(ingpack));
7242 }
7243 /*
7244 * Adjust various SGE Free List Host Buffer Sizes.
7245 *
7246 * This is something of a crock since we're using fixed indices into
7247 * the array which are also known by the sge.c code and the T4
7248 * Firmware Configuration File. We need to come up with a much better
7249 * approach to managing this array. For now, the first four entries
7250 * are:
7251 *
7252 * 0: Host Page Size
7253 * 1: 64KB
7254 * 2: Buffer size corresponding to 1500 byte MTU (unpacked mode)
7255 * 3: Buffer size corresponding to 9000 byte MTU (unpacked mode)
7256 *
7257 * For the single-MTU buffers in unpacked mode we need to include
7258 * space for the SGE Control Packet Shift, 14 byte Ethernet header,
7259 * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet
7260 * Padding boundary. All of these are accommodated in the Factory
7261 * Default Firmware Configuration File but we need to adjust it for
7262 * this host's cache line size.
7263 */
7264 t4_write_reg(adap, SGE_FL_BUFFER_SIZE0_A, page_size);
7265 t4_write_reg(adap, SGE_FL_BUFFER_SIZE2_A,
7266 (t4_read_reg(adap, SGE_FL_BUFFER_SIZE2_A) + fl_align-1)
7267 & ~(fl_align-1));
7268 t4_write_reg(adap, SGE_FL_BUFFER_SIZE3_A,
7269 (t4_read_reg(adap, SGE_FL_BUFFER_SIZE3_A) + fl_align-1)
7270 & ~(fl_align-1));
7271
7272 t4_write_reg(adap, ULP_RX_TDDP_PSZ_A, HPZ0_V(page_shift - 12));
7273
7274 return 0;
7275 }
7276
7277 /**
7278 * t4_fw_initialize - ask FW to initialize the device
7279 * @adap: the adapter
7280 * @mbox: mailbox to use for the FW command
7281 *
7282 * Issues a command to FW to partially initialize the device. This
7283 * performs initialization that generally doesn't depend on user input.
7284 */
t4_fw_initialize(struct adapter * adap,unsigned int mbox)7285 int t4_fw_initialize(struct adapter *adap, unsigned int mbox)
7286 {
7287 struct fw_initialize_cmd c;
7288
7289 memset(&c, 0, sizeof(c));
7290 INIT_CMD(c, INITIALIZE, WRITE);
7291 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
7292 }
7293
7294 /**
7295 * t4_query_params_rw - query FW or device parameters
7296 * @adap: the adapter
7297 * @mbox: mailbox to use for the FW command
7298 * @pf: the PF
7299 * @vf: the VF
7300 * @nparams: the number of parameters
7301 * @params: the parameter names
7302 * @val: the parameter values
7303 * @rw: Write and read flag
7304 * @sleep_ok: if true, we may sleep awaiting mbox cmd completion
7305 *
7306 * Reads the value of FW or device parameters. Up to 7 parameters can be
7307 * queried at once.
7308 */
t4_query_params_rw(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int nparams,const u32 * params,u32 * val,int rw,bool sleep_ok)7309 int t4_query_params_rw(struct adapter *adap, unsigned int mbox, unsigned int pf,
7310 unsigned int vf, unsigned int nparams, const u32 *params,
7311 u32 *val, int rw, bool sleep_ok)
7312 {
7313 int i, ret;
7314 struct fw_params_cmd c;
7315 __be32 *p = &c.param[0].mnem;
7316
7317 if (nparams > 7)
7318 return -EINVAL;
7319
7320 memset(&c, 0, sizeof(c));
7321 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) |
7322 FW_CMD_REQUEST_F | FW_CMD_READ_F |
7323 FW_PARAMS_CMD_PFN_V(pf) |
7324 FW_PARAMS_CMD_VFN_V(vf));
7325 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
7326
7327 for (i = 0; i < nparams; i++) {
7328 *p++ = cpu_to_be32(*params++);
7329 if (rw)
7330 *p = cpu_to_be32(*(val + i));
7331 p++;
7332 }
7333
7334 ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok);
7335 if (ret == 0)
7336 for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2)
7337 *val++ = be32_to_cpu(*p);
7338 return ret;
7339 }
7340
t4_query_params(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int nparams,const u32 * params,u32 * val)7341 int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
7342 unsigned int vf, unsigned int nparams, const u32 *params,
7343 u32 *val)
7344 {
7345 return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0,
7346 true);
7347 }
7348
t4_query_params_ns(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int nparams,const u32 * params,u32 * val)7349 int t4_query_params_ns(struct adapter *adap, unsigned int mbox, unsigned int pf,
7350 unsigned int vf, unsigned int nparams, const u32 *params,
7351 u32 *val)
7352 {
7353 return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0,
7354 false);
7355 }
7356
7357 /**
7358 * t4_set_params_timeout - sets FW or device parameters
7359 * @adap: the adapter
7360 * @mbox: mailbox to use for the FW command
7361 * @pf: the PF
7362 * @vf: the VF
7363 * @nparams: the number of parameters
7364 * @params: the parameter names
7365 * @val: the parameter values
7366 * @timeout: the timeout time
7367 *
7368 * Sets the value of FW or device parameters. Up to 7 parameters can be
7369 * specified at once.
7370 */
t4_set_params_timeout(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int nparams,const u32 * params,const u32 * val,int timeout)7371 int t4_set_params_timeout(struct adapter *adap, unsigned int mbox,
7372 unsigned int pf, unsigned int vf,
7373 unsigned int nparams, const u32 *params,
7374 const u32 *val, int timeout)
7375 {
7376 struct fw_params_cmd c;
7377 __be32 *p = &c.param[0].mnem;
7378
7379 if (nparams > 7)
7380 return -EINVAL;
7381
7382 memset(&c, 0, sizeof(c));
7383 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) |
7384 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7385 FW_PARAMS_CMD_PFN_V(pf) |
7386 FW_PARAMS_CMD_VFN_V(vf));
7387 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
7388
7389 while (nparams--) {
7390 *p++ = cpu_to_be32(*params++);
7391 *p++ = cpu_to_be32(*val++);
7392 }
7393
7394 return t4_wr_mbox_timeout(adap, mbox, &c, sizeof(c), NULL, timeout);
7395 }
7396
7397 /**
7398 * t4_set_params - sets FW or device parameters
7399 * @adap: the adapter
7400 * @mbox: mailbox to use for the FW command
7401 * @pf: the PF
7402 * @vf: the VF
7403 * @nparams: the number of parameters
7404 * @params: the parameter names
7405 * @val: the parameter values
7406 *
7407 * Sets the value of FW or device parameters. Up to 7 parameters can be
7408 * specified at once.
7409 */
t4_set_params(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int nparams,const u32 * params,const u32 * val)7410 int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
7411 unsigned int vf, unsigned int nparams, const u32 *params,
7412 const u32 *val)
7413 {
7414 return t4_set_params_timeout(adap, mbox, pf, vf, nparams, params, val,
7415 FW_CMD_MAX_TIMEOUT);
7416 }
7417
7418 /**
7419 * t4_cfg_pfvf - configure PF/VF resource limits
7420 * @adap: the adapter
7421 * @mbox: mailbox to use for the FW command
7422 * @pf: the PF being configured
7423 * @vf: the VF being configured
7424 * @txq: the max number of egress queues
7425 * @txq_eth_ctrl: the max number of egress Ethernet or control queues
7426 * @rxqi: the max number of interrupt-capable ingress queues
7427 * @rxq: the max number of interruptless ingress queues
7428 * @tc: the PCI traffic class
7429 * @vi: the max number of virtual interfaces
7430 * @cmask: the channel access rights mask for the PF/VF
7431 * @pmask: the port access rights mask for the PF/VF
7432 * @nexact: the maximum number of exact MPS filters
7433 * @rcaps: read capabilities
7434 * @wxcaps: write/execute capabilities
7435 *
7436 * Configures resource limits and capabilities for a physical or virtual
7437 * function.
7438 */
t4_cfg_pfvf(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int txq,unsigned int txq_eth_ctrl,unsigned int rxqi,unsigned int rxq,unsigned int tc,unsigned int vi,unsigned int cmask,unsigned int pmask,unsigned int nexact,unsigned int rcaps,unsigned int wxcaps)7439 int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf,
7440 unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl,
7441 unsigned int rxqi, unsigned int rxq, unsigned int tc,
7442 unsigned int vi, unsigned int cmask, unsigned int pmask,
7443 unsigned int nexact, unsigned int rcaps, unsigned int wxcaps)
7444 {
7445 struct fw_pfvf_cmd c;
7446
7447 memset(&c, 0, sizeof(c));
7448 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PFVF_CMD) | FW_CMD_REQUEST_F |
7449 FW_CMD_WRITE_F | FW_PFVF_CMD_PFN_V(pf) |
7450 FW_PFVF_CMD_VFN_V(vf));
7451 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
7452 c.niqflint_niq = cpu_to_be32(FW_PFVF_CMD_NIQFLINT_V(rxqi) |
7453 FW_PFVF_CMD_NIQ_V(rxq));
7454 c.type_to_neq = cpu_to_be32(FW_PFVF_CMD_CMASK_V(cmask) |
7455 FW_PFVF_CMD_PMASK_V(pmask) |
7456 FW_PFVF_CMD_NEQ_V(txq));
7457 c.tc_to_nexactf = cpu_to_be32(FW_PFVF_CMD_TC_V(tc) |
7458 FW_PFVF_CMD_NVI_V(vi) |
7459 FW_PFVF_CMD_NEXACTF_V(nexact));
7460 c.r_caps_to_nethctrl = cpu_to_be32(FW_PFVF_CMD_R_CAPS_V(rcaps) |
7461 FW_PFVF_CMD_WX_CAPS_V(wxcaps) |
7462 FW_PFVF_CMD_NETHCTRL_V(txq_eth_ctrl));
7463 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
7464 }
7465
7466 /**
7467 * t4_alloc_vi - allocate a virtual interface
7468 * @adap: the adapter
7469 * @mbox: mailbox to use for the FW command
7470 * @port: physical port associated with the VI
7471 * @pf: the PF owning the VI
7472 * @vf: the VF owning the VI
7473 * @nmac: number of MAC addresses needed (1 to 5)
7474 * @mac: the MAC addresses of the VI
7475 * @rss_size: size of RSS table slice associated with this VI
7476 *
7477 * Allocates a virtual interface for the given physical port. If @mac is
7478 * not %NULL it contains the MAC addresses of the VI as assigned by FW.
7479 * @mac should be large enough to hold @nmac Ethernet addresses, they are
7480 * stored consecutively so the space needed is @nmac * 6 bytes.
7481 * Returns a negative error number or the non-negative VI id.
7482 */
t4_alloc_vi(struct adapter * adap,unsigned int mbox,unsigned int port,unsigned int pf,unsigned int vf,unsigned int nmac,u8 * mac,unsigned int * rss_size)7483 int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port,
7484 unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac,
7485 unsigned int *rss_size)
7486 {
7487 int ret;
7488 struct fw_vi_cmd c;
7489
7490 memset(&c, 0, sizeof(c));
7491 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD) | FW_CMD_REQUEST_F |
7492 FW_CMD_WRITE_F | FW_CMD_EXEC_F |
7493 FW_VI_CMD_PFN_V(pf) | FW_VI_CMD_VFN_V(vf));
7494 c.alloc_to_len16 = cpu_to_be32(FW_VI_CMD_ALLOC_F | FW_LEN16(c));
7495 c.portid_pkd = FW_VI_CMD_PORTID_V(port);
7496 c.nmac = nmac - 1;
7497
7498 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
7499 if (ret)
7500 return ret;
7501
7502 if (mac) {
7503 memcpy(mac, c.mac, sizeof(c.mac));
7504 switch (nmac) {
7505 case 5:
7506 memcpy(mac + 24, c.nmac3, sizeof(c.nmac3));
7507 /* Fall through */
7508 case 4:
7509 memcpy(mac + 18, c.nmac2, sizeof(c.nmac2));
7510 /* Fall through */
7511 case 3:
7512 memcpy(mac + 12, c.nmac1, sizeof(c.nmac1));
7513 /* Fall through */
7514 case 2:
7515 memcpy(mac + 6, c.nmac0, sizeof(c.nmac0));
7516 }
7517 }
7518 if (rss_size)
7519 *rss_size = FW_VI_CMD_RSSSIZE_G(be16_to_cpu(c.rsssize_pkd));
7520 return FW_VI_CMD_VIID_G(be16_to_cpu(c.type_viid));
7521 }
7522
7523 /**
7524 * t4_free_vi - free a virtual interface
7525 * @adap: the adapter
7526 * @mbox: mailbox to use for the FW command
7527 * @pf: the PF owning the VI
7528 * @vf: the VF owning the VI
7529 * @viid: virtual interface identifiler
7530 *
7531 * Free a previously allocated virtual interface.
7532 */
t4_free_vi(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int viid)7533 int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf,
7534 unsigned int vf, unsigned int viid)
7535 {
7536 struct fw_vi_cmd c;
7537
7538 memset(&c, 0, sizeof(c));
7539 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD) |
7540 FW_CMD_REQUEST_F |
7541 FW_CMD_EXEC_F |
7542 FW_VI_CMD_PFN_V(pf) |
7543 FW_VI_CMD_VFN_V(vf));
7544 c.alloc_to_len16 = cpu_to_be32(FW_VI_CMD_FREE_F | FW_LEN16(c));
7545 c.type_viid = cpu_to_be16(FW_VI_CMD_VIID_V(viid));
7546
7547 return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
7548 }
7549
7550 /**
7551 * t4_set_rxmode - set Rx properties of a virtual interface
7552 * @adap: the adapter
7553 * @mbox: mailbox to use for the FW command
7554 * @viid: the VI id
7555 * @mtu: the new MTU or -1
7556 * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change
7557 * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change
7558 * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
7559 * @vlanex: 1 to enable HW VLAN extraction, 0 to disable it, -1 no change
7560 * @sleep_ok: if true we may sleep while awaiting command completion
7561 *
7562 * Sets Rx properties of a virtual interface.
7563 */
t4_set_rxmode(struct adapter * adap,unsigned int mbox,unsigned int viid,int mtu,int promisc,int all_multi,int bcast,int vlanex,bool sleep_ok)7564 int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid,
7565 int mtu, int promisc, int all_multi, int bcast, int vlanex,
7566 bool sleep_ok)
7567 {
7568 struct fw_vi_rxmode_cmd c;
7569
7570 /* convert to FW values */
7571 if (mtu < 0)
7572 mtu = FW_RXMODE_MTU_NO_CHG;
7573 if (promisc < 0)
7574 promisc = FW_VI_RXMODE_CMD_PROMISCEN_M;
7575 if (all_multi < 0)
7576 all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_M;
7577 if (bcast < 0)
7578 bcast = FW_VI_RXMODE_CMD_BROADCASTEN_M;
7579 if (vlanex < 0)
7580 vlanex = FW_VI_RXMODE_CMD_VLANEXEN_M;
7581
7582 memset(&c, 0, sizeof(c));
7583 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_RXMODE_CMD) |
7584 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7585 FW_VI_RXMODE_CMD_VIID_V(viid));
7586 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
7587 c.mtu_to_vlanexen =
7588 cpu_to_be32(FW_VI_RXMODE_CMD_MTU_V(mtu) |
7589 FW_VI_RXMODE_CMD_PROMISCEN_V(promisc) |
7590 FW_VI_RXMODE_CMD_ALLMULTIEN_V(all_multi) |
7591 FW_VI_RXMODE_CMD_BROADCASTEN_V(bcast) |
7592 FW_VI_RXMODE_CMD_VLANEXEN_V(vlanex));
7593 return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok);
7594 }
7595
7596 /**
7597 * t4_free_encap_mac_filt - frees MPS entry at given index
7598 * @adap: the adapter
7599 * @viid: the VI id
7600 * @idx: index of MPS entry to be freed
7601 * @sleep_ok: call is allowed to sleep
7602 *
7603 * Frees the MPS entry at supplied index
7604 *
7605 * Returns a negative error number or zero on success
7606 */
t4_free_encap_mac_filt(struct adapter * adap,unsigned int viid,int idx,bool sleep_ok)7607 int t4_free_encap_mac_filt(struct adapter *adap, unsigned int viid,
7608 int idx, bool sleep_ok)
7609 {
7610 struct fw_vi_mac_exact *p;
7611 u8 addr[] = {0, 0, 0, 0, 0, 0};
7612 struct fw_vi_mac_cmd c;
7613 int ret = 0;
7614 u32 exact;
7615
7616 memset(&c, 0, sizeof(c));
7617 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7618 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7619 FW_CMD_EXEC_V(0) |
7620 FW_VI_MAC_CMD_VIID_V(viid));
7621 exact = FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_EXACTMAC);
7622 c.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(0) |
7623 exact |
7624 FW_CMD_LEN16_V(1));
7625 p = c.u.exact;
7626 p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
7627 FW_VI_MAC_CMD_IDX_V(idx));
7628 memcpy(p->macaddr, addr, sizeof(p->macaddr));
7629 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
7630 return ret;
7631 }
7632
7633 /**
7634 * t4_free_raw_mac_filt - Frees a raw mac entry in mps tcam
7635 * @adap: the adapter
7636 * @viid: the VI id
7637 * @addr: the MAC address
7638 * @mask: the mask
7639 * @idx: index of the entry in mps tcam
7640 * @lookup_type: MAC address for inner (1) or outer (0) header
7641 * @port_id: the port index
7642 * @sleep_ok: call is allowed to sleep
7643 *
7644 * Removes the mac entry at the specified index using raw mac interface.
7645 *
7646 * Returns a negative error number on failure.
7647 */
t4_free_raw_mac_filt(struct adapter * adap,unsigned int viid,const u8 * addr,const u8 * mask,unsigned int idx,u8 lookup_type,u8 port_id,bool sleep_ok)7648 int t4_free_raw_mac_filt(struct adapter *adap, unsigned int viid,
7649 const u8 *addr, const u8 *mask, unsigned int idx,
7650 u8 lookup_type, u8 port_id, bool sleep_ok)
7651 {
7652 struct fw_vi_mac_cmd c;
7653 struct fw_vi_mac_raw *p = &c.u.raw;
7654 u32 val;
7655
7656 memset(&c, 0, sizeof(c));
7657 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7658 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7659 FW_CMD_EXEC_V(0) |
7660 FW_VI_MAC_CMD_VIID_V(viid));
7661 val = FW_CMD_LEN16_V(1) |
7662 FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_RAW);
7663 c.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(0) |
7664 FW_CMD_LEN16_V(val));
7665
7666 p->raw_idx_pkd = cpu_to_be32(FW_VI_MAC_CMD_RAW_IDX_V(idx) |
7667 FW_VI_MAC_ID_BASED_FREE);
7668
7669 /* Lookup Type. Outer header: 0, Inner header: 1 */
7670 p->data0_pkd = cpu_to_be32(DATALKPTYPE_V(lookup_type) |
7671 DATAPORTNUM_V(port_id));
7672 /* Lookup mask and port mask */
7673 p->data0m_pkd = cpu_to_be64(DATALKPTYPE_V(DATALKPTYPE_M) |
7674 DATAPORTNUM_V(DATAPORTNUM_M));
7675
7676 /* Copy the address and the mask */
7677 memcpy((u8 *)&p->data1[0] + 2, addr, ETH_ALEN);
7678 memcpy((u8 *)&p->data1m[0] + 2, mask, ETH_ALEN);
7679
7680 return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
7681 }
7682
7683 /**
7684 * t4_alloc_encap_mac_filt - Adds a mac entry in mps tcam with VNI support
7685 * @adap: the adapter
7686 * @viid: the VI id
7687 * @mac: the MAC address
7688 * @mask: the mask
7689 * @vni: the VNI id for the tunnel protocol
7690 * @vni_mask: mask for the VNI id
7691 * @dip_hit: to enable DIP match for the MPS entry
7692 * @lookup_type: MAC address for inner (1) or outer (0) header
7693 * @sleep_ok: call is allowed to sleep
7694 *
7695 * Allocates an MPS entry with specified MAC address and VNI value.
7696 *
7697 * Returns a negative error number or the allocated index for this mac.
7698 */
t4_alloc_encap_mac_filt(struct adapter * adap,unsigned int viid,const u8 * addr,const u8 * mask,unsigned int vni,unsigned int vni_mask,u8 dip_hit,u8 lookup_type,bool sleep_ok)7699 int t4_alloc_encap_mac_filt(struct adapter *adap, unsigned int viid,
7700 const u8 *addr, const u8 *mask, unsigned int vni,
7701 unsigned int vni_mask, u8 dip_hit, u8 lookup_type,
7702 bool sleep_ok)
7703 {
7704 struct fw_vi_mac_cmd c;
7705 struct fw_vi_mac_vni *p = c.u.exact_vni;
7706 int ret = 0;
7707 u32 val;
7708
7709 memset(&c, 0, sizeof(c));
7710 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7711 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7712 FW_VI_MAC_CMD_VIID_V(viid));
7713 val = FW_CMD_LEN16_V(1) |
7714 FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_EXACTMAC_VNI);
7715 c.freemacs_to_len16 = cpu_to_be32(val);
7716 p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
7717 FW_VI_MAC_CMD_IDX_V(FW_VI_MAC_ADD_MAC));
7718 memcpy(p->macaddr, addr, sizeof(p->macaddr));
7719 memcpy(p->macaddr_mask, mask, sizeof(p->macaddr_mask));
7720
7721 p->lookup_type_to_vni =
7722 cpu_to_be32(FW_VI_MAC_CMD_VNI_V(vni) |
7723 FW_VI_MAC_CMD_DIP_HIT_V(dip_hit) |
7724 FW_VI_MAC_CMD_LOOKUP_TYPE_V(lookup_type));
7725 p->vni_mask_pkd = cpu_to_be32(FW_VI_MAC_CMD_VNI_MASK_V(vni_mask));
7726 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
7727 if (ret == 0)
7728 ret = FW_VI_MAC_CMD_IDX_G(be16_to_cpu(p->valid_to_idx));
7729 return ret;
7730 }
7731
7732 /**
7733 * t4_alloc_raw_mac_filt - Adds a mac entry in mps tcam
7734 * @adap: the adapter
7735 * @viid: the VI id
7736 * @mac: the MAC address
7737 * @mask: the mask
7738 * @idx: index at which to add this entry
7739 * @port_id: the port index
7740 * @lookup_type: MAC address for inner (1) or outer (0) header
7741 * @sleep_ok: call is allowed to sleep
7742 *
7743 * Adds the mac entry at the specified index using raw mac interface.
7744 *
7745 * Returns a negative error number or the allocated index for this mac.
7746 */
t4_alloc_raw_mac_filt(struct adapter * adap,unsigned int viid,const u8 * addr,const u8 * mask,unsigned int idx,u8 lookup_type,u8 port_id,bool sleep_ok)7747 int t4_alloc_raw_mac_filt(struct adapter *adap, unsigned int viid,
7748 const u8 *addr, const u8 *mask, unsigned int idx,
7749 u8 lookup_type, u8 port_id, bool sleep_ok)
7750 {
7751 int ret = 0;
7752 struct fw_vi_mac_cmd c;
7753 struct fw_vi_mac_raw *p = &c.u.raw;
7754 u32 val;
7755
7756 memset(&c, 0, sizeof(c));
7757 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7758 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7759 FW_VI_MAC_CMD_VIID_V(viid));
7760 val = FW_CMD_LEN16_V(1) |
7761 FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_RAW);
7762 c.freemacs_to_len16 = cpu_to_be32(val);
7763
7764 /* Specify that this is an inner mac address */
7765 p->raw_idx_pkd = cpu_to_be32(FW_VI_MAC_CMD_RAW_IDX_V(idx));
7766
7767 /* Lookup Type. Outer header: 0, Inner header: 1 */
7768 p->data0_pkd = cpu_to_be32(DATALKPTYPE_V(lookup_type) |
7769 DATAPORTNUM_V(port_id));
7770 /* Lookup mask and port mask */
7771 p->data0m_pkd = cpu_to_be64(DATALKPTYPE_V(DATALKPTYPE_M) |
7772 DATAPORTNUM_V(DATAPORTNUM_M));
7773
7774 /* Copy the address and the mask */
7775 memcpy((u8 *)&p->data1[0] + 2, addr, ETH_ALEN);
7776 memcpy((u8 *)&p->data1m[0] + 2, mask, ETH_ALEN);
7777
7778 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
7779 if (ret == 0) {
7780 ret = FW_VI_MAC_CMD_RAW_IDX_G(be32_to_cpu(p->raw_idx_pkd));
7781 if (ret != idx)
7782 ret = -ENOMEM;
7783 }
7784
7785 return ret;
7786 }
7787
7788 /**
7789 * t4_alloc_mac_filt - allocates exact-match filters for MAC addresses
7790 * @adap: the adapter
7791 * @mbox: mailbox to use for the FW command
7792 * @viid: the VI id
7793 * @free: if true any existing filters for this VI id are first removed
7794 * @naddr: the number of MAC addresses to allocate filters for (up to 7)
7795 * @addr: the MAC address(es)
7796 * @idx: where to store the index of each allocated filter
7797 * @hash: pointer to hash address filter bitmap
7798 * @sleep_ok: call is allowed to sleep
7799 *
7800 * Allocates an exact-match filter for each of the supplied addresses and
7801 * sets it to the corresponding address. If @idx is not %NULL it should
7802 * have at least @naddr entries, each of which will be set to the index of
7803 * the filter allocated for the corresponding MAC address. If a filter
7804 * could not be allocated for an address its index is set to 0xffff.
7805 * If @hash is not %NULL addresses that fail to allocate an exact filter
7806 * are hashed and update the hash filter bitmap pointed at by @hash.
7807 *
7808 * Returns a negative error number or the number of filters allocated.
7809 */
t4_alloc_mac_filt(struct adapter * adap,unsigned int mbox,unsigned int viid,bool free,unsigned int naddr,const u8 ** addr,u16 * idx,u64 * hash,bool sleep_ok)7810 int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox,
7811 unsigned int viid, bool free, unsigned int naddr,
7812 const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok)
7813 {
7814 int offset, ret = 0;
7815 struct fw_vi_mac_cmd c;
7816 unsigned int nfilters = 0;
7817 unsigned int max_naddr = adap->params.arch.mps_tcam_size;
7818 unsigned int rem = naddr;
7819
7820 if (naddr > max_naddr)
7821 return -EINVAL;
7822
7823 for (offset = 0; offset < naddr ; /**/) {
7824 unsigned int fw_naddr = (rem < ARRAY_SIZE(c.u.exact) ?
7825 rem : ARRAY_SIZE(c.u.exact));
7826 size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
7827 u.exact[fw_naddr]), 16);
7828 struct fw_vi_mac_exact *p;
7829 int i;
7830
7831 memset(&c, 0, sizeof(c));
7832 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7833 FW_CMD_REQUEST_F |
7834 FW_CMD_WRITE_F |
7835 FW_CMD_EXEC_V(free) |
7836 FW_VI_MAC_CMD_VIID_V(viid));
7837 c.freemacs_to_len16 =
7838 cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(free) |
7839 FW_CMD_LEN16_V(len16));
7840
7841 for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) {
7842 p->valid_to_idx =
7843 cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
7844 FW_VI_MAC_CMD_IDX_V(
7845 FW_VI_MAC_ADD_MAC));
7846 memcpy(p->macaddr, addr[offset + i],
7847 sizeof(p->macaddr));
7848 }
7849
7850 /* It's okay if we run out of space in our MAC address arena.
7851 * Some of the addresses we submit may get stored so we need
7852 * to run through the reply to see what the results were ...
7853 */
7854 ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok);
7855 if (ret && ret != -FW_ENOMEM)
7856 break;
7857
7858 for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) {
7859 u16 index = FW_VI_MAC_CMD_IDX_G(
7860 be16_to_cpu(p->valid_to_idx));
7861
7862 if (idx)
7863 idx[offset + i] = (index >= max_naddr ?
7864 0xffff : index);
7865 if (index < max_naddr)
7866 nfilters++;
7867 else if (hash)
7868 *hash |= (1ULL <<
7869 hash_mac_addr(addr[offset + i]));
7870 }
7871
7872 free = false;
7873 offset += fw_naddr;
7874 rem -= fw_naddr;
7875 }
7876
7877 if (ret == 0 || ret == -FW_ENOMEM)
7878 ret = nfilters;
7879 return ret;
7880 }
7881
7882 /**
7883 * t4_free_mac_filt - frees exact-match filters of given MAC addresses
7884 * @adap: the adapter
7885 * @mbox: mailbox to use for the FW command
7886 * @viid: the VI id
7887 * @naddr: the number of MAC addresses to allocate filters for (up to 7)
7888 * @addr: the MAC address(es)
7889 * @sleep_ok: call is allowed to sleep
7890 *
7891 * Frees the exact-match filter for each of the supplied addresses
7892 *
7893 * Returns a negative error number or the number of filters freed.
7894 */
t4_free_mac_filt(struct adapter * adap,unsigned int mbox,unsigned int viid,unsigned int naddr,const u8 ** addr,bool sleep_ok)7895 int t4_free_mac_filt(struct adapter *adap, unsigned int mbox,
7896 unsigned int viid, unsigned int naddr,
7897 const u8 **addr, bool sleep_ok)
7898 {
7899 int offset, ret = 0;
7900 struct fw_vi_mac_cmd c;
7901 unsigned int nfilters = 0;
7902 unsigned int max_naddr = is_t4(adap->params.chip) ?
7903 NUM_MPS_CLS_SRAM_L_INSTANCES :
7904 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
7905 unsigned int rem = naddr;
7906
7907 if (naddr > max_naddr)
7908 return -EINVAL;
7909
7910 for (offset = 0; offset < (int)naddr ; /**/) {
7911 unsigned int fw_naddr = (rem < ARRAY_SIZE(c.u.exact)
7912 ? rem
7913 : ARRAY_SIZE(c.u.exact));
7914 size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
7915 u.exact[fw_naddr]), 16);
7916 struct fw_vi_mac_exact *p;
7917 int i;
7918
7919 memset(&c, 0, sizeof(c));
7920 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7921 FW_CMD_REQUEST_F |
7922 FW_CMD_WRITE_F |
7923 FW_CMD_EXEC_V(0) |
7924 FW_VI_MAC_CMD_VIID_V(viid));
7925 c.freemacs_to_len16 =
7926 cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(0) |
7927 FW_CMD_LEN16_V(len16));
7928
7929 for (i = 0, p = c.u.exact; i < (int)fw_naddr; i++, p++) {
7930 p->valid_to_idx = cpu_to_be16(
7931 FW_VI_MAC_CMD_VALID_F |
7932 FW_VI_MAC_CMD_IDX_V(FW_VI_MAC_MAC_BASED_FREE));
7933 memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr));
7934 }
7935
7936 ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok);
7937 if (ret)
7938 break;
7939
7940 for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) {
7941 u16 index = FW_VI_MAC_CMD_IDX_G(
7942 be16_to_cpu(p->valid_to_idx));
7943
7944 if (index < max_naddr)
7945 nfilters++;
7946 }
7947
7948 offset += fw_naddr;
7949 rem -= fw_naddr;
7950 }
7951
7952 if (ret == 0)
7953 ret = nfilters;
7954 return ret;
7955 }
7956
7957 /**
7958 * t4_change_mac - modifies the exact-match filter for a MAC address
7959 * @adap: the adapter
7960 * @mbox: mailbox to use for the FW command
7961 * @viid: the VI id
7962 * @idx: index of existing filter for old value of MAC address, or -1
7963 * @addr: the new MAC address value
7964 * @persist: whether a new MAC allocation should be persistent
7965 * @add_smt: if true also add the address to the HW SMT
7966 *
7967 * Modifies an exact-match filter and sets it to the new MAC address.
7968 * Note that in general it is not possible to modify the value of a given
7969 * filter so the generic way to modify an address filter is to free the one
7970 * being used by the old address value and allocate a new filter for the
7971 * new address value. @idx can be -1 if the address is a new addition.
7972 *
7973 * Returns a negative error number or the index of the filter with the new
7974 * MAC value.
7975 */
t4_change_mac(struct adapter * adap,unsigned int mbox,unsigned int viid,int idx,const u8 * addr,bool persist,bool add_smt)7976 int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid,
7977 int idx, const u8 *addr, bool persist, bool add_smt)
7978 {
7979 int ret, mode;
7980 struct fw_vi_mac_cmd c;
7981 struct fw_vi_mac_exact *p = c.u.exact;
7982 unsigned int max_mac_addr = adap->params.arch.mps_tcam_size;
7983
7984 if (idx < 0) /* new allocation */
7985 idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC;
7986 mode = add_smt ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY;
7987
7988 memset(&c, 0, sizeof(c));
7989 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7990 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7991 FW_VI_MAC_CMD_VIID_V(viid));
7992 c.freemacs_to_len16 = cpu_to_be32(FW_CMD_LEN16_V(1));
7993 p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
7994 FW_VI_MAC_CMD_SMAC_RESULT_V(mode) |
7995 FW_VI_MAC_CMD_IDX_V(idx));
7996 memcpy(p->macaddr, addr, sizeof(p->macaddr));
7997
7998 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
7999 if (ret == 0) {
8000 ret = FW_VI_MAC_CMD_IDX_G(be16_to_cpu(p->valid_to_idx));
8001 if (ret >= max_mac_addr)
8002 ret = -ENOMEM;
8003 }
8004 return ret;
8005 }
8006
8007 /**
8008 * t4_set_addr_hash - program the MAC inexact-match hash filter
8009 * @adap: the adapter
8010 * @mbox: mailbox to use for the FW command
8011 * @viid: the VI id
8012 * @ucast: whether the hash filter should also match unicast addresses
8013 * @vec: the value to be written to the hash filter
8014 * @sleep_ok: call is allowed to sleep
8015 *
8016 * Sets the 64-bit inexact-match hash filter for a virtual interface.
8017 */
t4_set_addr_hash(struct adapter * adap,unsigned int mbox,unsigned int viid,bool ucast,u64 vec,bool sleep_ok)8018 int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid,
8019 bool ucast, u64 vec, bool sleep_ok)
8020 {
8021 struct fw_vi_mac_cmd c;
8022
8023 memset(&c, 0, sizeof(c));
8024 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
8025 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
8026 FW_VI_ENABLE_CMD_VIID_V(viid));
8027 c.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_HASHVECEN_F |
8028 FW_VI_MAC_CMD_HASHUNIEN_V(ucast) |
8029 FW_CMD_LEN16_V(1));
8030 c.u.hash.hashvec = cpu_to_be64(vec);
8031 return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok);
8032 }
8033
8034 /**
8035 * t4_enable_vi_params - enable/disable a virtual interface
8036 * @adap: the adapter
8037 * @mbox: mailbox to use for the FW command
8038 * @viid: the VI id
8039 * @rx_en: 1=enable Rx, 0=disable Rx
8040 * @tx_en: 1=enable Tx, 0=disable Tx
8041 * @dcb_en: 1=enable delivery of Data Center Bridging messages.
8042 *
8043 * Enables/disables a virtual interface. Note that setting DCB Enable
8044 * only makes sense when enabling a Virtual Interface ...
8045 */
t4_enable_vi_params(struct adapter * adap,unsigned int mbox,unsigned int viid,bool rx_en,bool tx_en,bool dcb_en)8046 int t4_enable_vi_params(struct adapter *adap, unsigned int mbox,
8047 unsigned int viid, bool rx_en, bool tx_en, bool dcb_en)
8048 {
8049 struct fw_vi_enable_cmd c;
8050
8051 memset(&c, 0, sizeof(c));
8052 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD) |
8053 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
8054 FW_VI_ENABLE_CMD_VIID_V(viid));
8055 c.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_IEN_V(rx_en) |
8056 FW_VI_ENABLE_CMD_EEN_V(tx_en) |
8057 FW_VI_ENABLE_CMD_DCB_INFO_V(dcb_en) |
8058 FW_LEN16(c));
8059 return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL);
8060 }
8061
8062 /**
8063 * t4_enable_vi - enable/disable a virtual interface
8064 * @adap: the adapter
8065 * @mbox: mailbox to use for the FW command
8066 * @viid: the VI id
8067 * @rx_en: 1=enable Rx, 0=disable Rx
8068 * @tx_en: 1=enable Tx, 0=disable Tx
8069 *
8070 * Enables/disables a virtual interface.
8071 */
t4_enable_vi(struct adapter * adap,unsigned int mbox,unsigned int viid,bool rx_en,bool tx_en)8072 int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
8073 bool rx_en, bool tx_en)
8074 {
8075 return t4_enable_vi_params(adap, mbox, viid, rx_en, tx_en, 0);
8076 }
8077
8078 /**
8079 * t4_enable_pi_params - enable/disable a Port's Virtual Interface
8080 * @adap: the adapter
8081 * @mbox: mailbox to use for the FW command
8082 * @pi: the Port Information structure
8083 * @rx_en: 1=enable Rx, 0=disable Rx
8084 * @tx_en: 1=enable Tx, 0=disable Tx
8085 * @dcb_en: 1=enable delivery of Data Center Bridging messages.
8086 *
8087 * Enables/disables a Port's Virtual Interface. Note that setting DCB
8088 * Enable only makes sense when enabling a Virtual Interface ...
8089 * If the Virtual Interface enable/disable operation is successful,
8090 * we notify the OS-specific code of a potential Link Status change
8091 * via the OS Contract API t4_os_link_changed().
8092 */
t4_enable_pi_params(struct adapter * adap,unsigned int mbox,struct port_info * pi,bool rx_en,bool tx_en,bool dcb_en)8093 int t4_enable_pi_params(struct adapter *adap, unsigned int mbox,
8094 struct port_info *pi,
8095 bool rx_en, bool tx_en, bool dcb_en)
8096 {
8097 int ret = t4_enable_vi_params(adap, mbox, pi->viid,
8098 rx_en, tx_en, dcb_en);
8099 if (ret)
8100 return ret;
8101 t4_os_link_changed(adap, pi->port_id,
8102 rx_en && tx_en && pi->link_cfg.link_ok);
8103 return 0;
8104 }
8105
8106 /**
8107 * t4_identify_port - identify a VI's port by blinking its LED
8108 * @adap: the adapter
8109 * @mbox: mailbox to use for the FW command
8110 * @viid: the VI id
8111 * @nblinks: how many times to blink LED at 2.5 Hz
8112 *
8113 * Identifies a VI's port by blinking its LED.
8114 */
t4_identify_port(struct adapter * adap,unsigned int mbox,unsigned int viid,unsigned int nblinks)8115 int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid,
8116 unsigned int nblinks)
8117 {
8118 struct fw_vi_enable_cmd c;
8119
8120 memset(&c, 0, sizeof(c));
8121 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD) |
8122 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
8123 FW_VI_ENABLE_CMD_VIID_V(viid));
8124 c.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_LED_F | FW_LEN16(c));
8125 c.blinkdur = cpu_to_be16(nblinks);
8126 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8127 }
8128
8129 /**
8130 * t4_iq_stop - stop an ingress queue and its FLs
8131 * @adap: the adapter
8132 * @mbox: mailbox to use for the FW command
8133 * @pf: the PF owning the queues
8134 * @vf: the VF owning the queues
8135 * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.)
8136 * @iqid: ingress queue id
8137 * @fl0id: FL0 queue id or 0xffff if no attached FL0
8138 * @fl1id: FL1 queue id or 0xffff if no attached FL1
8139 *
8140 * Stops an ingress queue and its associated FLs, if any. This causes
8141 * any current or future data/messages destined for these queues to be
8142 * tossed.
8143 */
t4_iq_stop(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int iqtype,unsigned int iqid,unsigned int fl0id,unsigned int fl1id)8144 int t4_iq_stop(struct adapter *adap, unsigned int mbox, unsigned int pf,
8145 unsigned int vf, unsigned int iqtype, unsigned int iqid,
8146 unsigned int fl0id, unsigned int fl1id)
8147 {
8148 struct fw_iq_cmd c;
8149
8150 memset(&c, 0, sizeof(c));
8151 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_IQ_CMD) | FW_CMD_REQUEST_F |
8152 FW_CMD_EXEC_F | FW_IQ_CMD_PFN_V(pf) |
8153 FW_IQ_CMD_VFN_V(vf));
8154 c.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_IQSTOP_F | FW_LEN16(c));
8155 c.type_to_iqandstindex = cpu_to_be32(FW_IQ_CMD_TYPE_V(iqtype));
8156 c.iqid = cpu_to_be16(iqid);
8157 c.fl0id = cpu_to_be16(fl0id);
8158 c.fl1id = cpu_to_be16(fl1id);
8159 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8160 }
8161
8162 /**
8163 * t4_iq_free - free an ingress queue and its FLs
8164 * @adap: the adapter
8165 * @mbox: mailbox to use for the FW command
8166 * @pf: the PF owning the queues
8167 * @vf: the VF owning the queues
8168 * @iqtype: the ingress queue type
8169 * @iqid: ingress queue id
8170 * @fl0id: FL0 queue id or 0xffff if no attached FL0
8171 * @fl1id: FL1 queue id or 0xffff if no attached FL1
8172 *
8173 * Frees an ingress queue and its associated FLs, if any.
8174 */
t4_iq_free(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int iqtype,unsigned int iqid,unsigned int fl0id,unsigned int fl1id)8175 int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
8176 unsigned int vf, unsigned int iqtype, unsigned int iqid,
8177 unsigned int fl0id, unsigned int fl1id)
8178 {
8179 struct fw_iq_cmd c;
8180
8181 memset(&c, 0, sizeof(c));
8182 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_IQ_CMD) | FW_CMD_REQUEST_F |
8183 FW_CMD_EXEC_F | FW_IQ_CMD_PFN_V(pf) |
8184 FW_IQ_CMD_VFN_V(vf));
8185 c.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_FREE_F | FW_LEN16(c));
8186 c.type_to_iqandstindex = cpu_to_be32(FW_IQ_CMD_TYPE_V(iqtype));
8187 c.iqid = cpu_to_be16(iqid);
8188 c.fl0id = cpu_to_be16(fl0id);
8189 c.fl1id = cpu_to_be16(fl1id);
8190 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8191 }
8192
8193 /**
8194 * t4_eth_eq_free - free an Ethernet egress queue
8195 * @adap: the adapter
8196 * @mbox: mailbox to use for the FW command
8197 * @pf: the PF owning the queue
8198 * @vf: the VF owning the queue
8199 * @eqid: egress queue id
8200 *
8201 * Frees an Ethernet egress queue.
8202 */
t4_eth_eq_free(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int eqid)8203 int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
8204 unsigned int vf, unsigned int eqid)
8205 {
8206 struct fw_eq_eth_cmd c;
8207
8208 memset(&c, 0, sizeof(c));
8209 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_ETH_CMD) |
8210 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
8211 FW_EQ_ETH_CMD_PFN_V(pf) |
8212 FW_EQ_ETH_CMD_VFN_V(vf));
8213 c.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_FREE_F | FW_LEN16(c));
8214 c.eqid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_EQID_V(eqid));
8215 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8216 }
8217
8218 /**
8219 * t4_ctrl_eq_free - free a control egress queue
8220 * @adap: the adapter
8221 * @mbox: mailbox to use for the FW command
8222 * @pf: the PF owning the queue
8223 * @vf: the VF owning the queue
8224 * @eqid: egress queue id
8225 *
8226 * Frees a control egress queue.
8227 */
t4_ctrl_eq_free(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int eqid)8228 int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
8229 unsigned int vf, unsigned int eqid)
8230 {
8231 struct fw_eq_ctrl_cmd c;
8232
8233 memset(&c, 0, sizeof(c));
8234 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_CTRL_CMD) |
8235 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
8236 FW_EQ_CTRL_CMD_PFN_V(pf) |
8237 FW_EQ_CTRL_CMD_VFN_V(vf));
8238 c.alloc_to_len16 = cpu_to_be32(FW_EQ_CTRL_CMD_FREE_F | FW_LEN16(c));
8239 c.cmpliqid_eqid = cpu_to_be32(FW_EQ_CTRL_CMD_EQID_V(eqid));
8240 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8241 }
8242
8243 /**
8244 * t4_ofld_eq_free - free an offload egress queue
8245 * @adap: the adapter
8246 * @mbox: mailbox to use for the FW command
8247 * @pf: the PF owning the queue
8248 * @vf: the VF owning the queue
8249 * @eqid: egress queue id
8250 *
8251 * Frees a control egress queue.
8252 */
t4_ofld_eq_free(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int eqid)8253 int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
8254 unsigned int vf, unsigned int eqid)
8255 {
8256 struct fw_eq_ofld_cmd c;
8257
8258 memset(&c, 0, sizeof(c));
8259 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_OFLD_CMD) |
8260 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
8261 FW_EQ_OFLD_CMD_PFN_V(pf) |
8262 FW_EQ_OFLD_CMD_VFN_V(vf));
8263 c.alloc_to_len16 = cpu_to_be32(FW_EQ_OFLD_CMD_FREE_F | FW_LEN16(c));
8264 c.eqid_pkd = cpu_to_be32(FW_EQ_OFLD_CMD_EQID_V(eqid));
8265 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8266 }
8267
8268 /**
8269 * t4_link_down_rc_str - return a string for a Link Down Reason Code
8270 * @adap: the adapter
8271 * @link_down_rc: Link Down Reason Code
8272 *
8273 * Returns a string representation of the Link Down Reason Code.
8274 */
t4_link_down_rc_str(unsigned char link_down_rc)8275 static const char *t4_link_down_rc_str(unsigned char link_down_rc)
8276 {
8277 static const char * const reason[] = {
8278 "Link Down",
8279 "Remote Fault",
8280 "Auto-negotiation Failure",
8281 "Reserved",
8282 "Insufficient Airflow",
8283 "Unable To Determine Reason",
8284 "No RX Signal Detected",
8285 "Reserved",
8286 };
8287
8288 if (link_down_rc >= ARRAY_SIZE(reason))
8289 return "Bad Reason Code";
8290
8291 return reason[link_down_rc];
8292 }
8293
8294 /**
8295 * Return the highest speed set in the port capabilities, in Mb/s.
8296 */
fwcap_to_speed(fw_port_cap32_t caps)8297 static unsigned int fwcap_to_speed(fw_port_cap32_t caps)
8298 {
8299 #define TEST_SPEED_RETURN(__caps_speed, __speed) \
8300 do { \
8301 if (caps & FW_PORT_CAP32_SPEED_##__caps_speed) \
8302 return __speed; \
8303 } while (0)
8304
8305 TEST_SPEED_RETURN(400G, 400000);
8306 TEST_SPEED_RETURN(200G, 200000);
8307 TEST_SPEED_RETURN(100G, 100000);
8308 TEST_SPEED_RETURN(50G, 50000);
8309 TEST_SPEED_RETURN(40G, 40000);
8310 TEST_SPEED_RETURN(25G, 25000);
8311 TEST_SPEED_RETURN(10G, 10000);
8312 TEST_SPEED_RETURN(1G, 1000);
8313 TEST_SPEED_RETURN(100M, 100);
8314
8315 #undef TEST_SPEED_RETURN
8316
8317 return 0;
8318 }
8319
8320 /**
8321 * fwcap_to_fwspeed - return highest speed in Port Capabilities
8322 * @acaps: advertised Port Capabilities
8323 *
8324 * Get the highest speed for the port from the advertised Port
8325 * Capabilities. It will be either the highest speed from the list of
8326 * speeds or whatever user has set using ethtool.
8327 */
fwcap_to_fwspeed(fw_port_cap32_t acaps)8328 static fw_port_cap32_t fwcap_to_fwspeed(fw_port_cap32_t acaps)
8329 {
8330 #define TEST_SPEED_RETURN(__caps_speed) \
8331 do { \
8332 if (acaps & FW_PORT_CAP32_SPEED_##__caps_speed) \
8333 return FW_PORT_CAP32_SPEED_##__caps_speed; \
8334 } while (0)
8335
8336 TEST_SPEED_RETURN(400G);
8337 TEST_SPEED_RETURN(200G);
8338 TEST_SPEED_RETURN(100G);
8339 TEST_SPEED_RETURN(50G);
8340 TEST_SPEED_RETURN(40G);
8341 TEST_SPEED_RETURN(25G);
8342 TEST_SPEED_RETURN(10G);
8343 TEST_SPEED_RETURN(1G);
8344 TEST_SPEED_RETURN(100M);
8345
8346 #undef TEST_SPEED_RETURN
8347
8348 return 0;
8349 }
8350
8351 /**
8352 * lstatus_to_fwcap - translate old lstatus to 32-bit Port Capabilities
8353 * @lstatus: old FW_PORT_ACTION_GET_PORT_INFO lstatus value
8354 *
8355 * Translates old FW_PORT_ACTION_GET_PORT_INFO lstatus field into new
8356 * 32-bit Port Capabilities value.
8357 */
lstatus_to_fwcap(u32 lstatus)8358 static fw_port_cap32_t lstatus_to_fwcap(u32 lstatus)
8359 {
8360 fw_port_cap32_t linkattr = 0;
8361
8362 /* Unfortunately the format of the Link Status in the old
8363 * 16-bit Port Information message isn't the same as the
8364 * 16-bit Port Capabilities bitfield used everywhere else ...
8365 */
8366 if (lstatus & FW_PORT_CMD_RXPAUSE_F)
8367 linkattr |= FW_PORT_CAP32_FC_RX;
8368 if (lstatus & FW_PORT_CMD_TXPAUSE_F)
8369 linkattr |= FW_PORT_CAP32_FC_TX;
8370 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
8371 linkattr |= FW_PORT_CAP32_SPEED_100M;
8372 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
8373 linkattr |= FW_PORT_CAP32_SPEED_1G;
8374 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
8375 linkattr |= FW_PORT_CAP32_SPEED_10G;
8376 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G))
8377 linkattr |= FW_PORT_CAP32_SPEED_25G;
8378 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
8379 linkattr |= FW_PORT_CAP32_SPEED_40G;
8380 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G))
8381 linkattr |= FW_PORT_CAP32_SPEED_100G;
8382
8383 return linkattr;
8384 }
8385
8386 /**
8387 * t4_handle_get_port_info - process a FW reply message
8388 * @pi: the port info
8389 * @rpl: start of the FW message
8390 *
8391 * Processes a GET_PORT_INFO FW reply message.
8392 */
t4_handle_get_port_info(struct port_info * pi,const __be64 * rpl)8393 void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
8394 {
8395 const struct fw_port_cmd *cmd = (const void *)rpl;
8396 int action = FW_PORT_CMD_ACTION_G(be32_to_cpu(cmd->action_to_len16));
8397 struct adapter *adapter = pi->adapter;
8398 struct link_config *lc = &pi->link_cfg;
8399 int link_ok, linkdnrc;
8400 enum fw_port_type port_type;
8401 enum fw_port_module_type mod_type;
8402 unsigned int speed, fc, fec;
8403 fw_port_cap32_t pcaps, acaps, lpacaps, linkattr;
8404
8405 /* Extract the various fields from the Port Information message.
8406 */
8407 switch (action) {
8408 case FW_PORT_ACTION_GET_PORT_INFO: {
8409 u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype);
8410
8411 link_ok = (lstatus & FW_PORT_CMD_LSTATUS_F) != 0;
8412 linkdnrc = FW_PORT_CMD_LINKDNRC_G(lstatus);
8413 port_type = FW_PORT_CMD_PTYPE_G(lstatus);
8414 mod_type = FW_PORT_CMD_MODTYPE_G(lstatus);
8415 pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.pcap));
8416 acaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.acap));
8417 lpacaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.lpacap));
8418 linkattr = lstatus_to_fwcap(lstatus);
8419 break;
8420 }
8421
8422 case FW_PORT_ACTION_GET_PORT_INFO32: {
8423 u32 lstatus32;
8424
8425 lstatus32 = be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32);
8426 link_ok = (lstatus32 & FW_PORT_CMD_LSTATUS32_F) != 0;
8427 linkdnrc = FW_PORT_CMD_LINKDNRC32_G(lstatus32);
8428 port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32);
8429 mod_type = FW_PORT_CMD_MODTYPE32_G(lstatus32);
8430 pcaps = be32_to_cpu(cmd->u.info32.pcaps32);
8431 acaps = be32_to_cpu(cmd->u.info32.acaps32);
8432 lpacaps = be32_to_cpu(cmd->u.info32.lpacaps32);
8433 linkattr = be32_to_cpu(cmd->u.info32.linkattr32);
8434 break;
8435 }
8436
8437 default:
8438 dev_err(adapter->pdev_dev, "Handle Port Information: Bad Command/Action %#x\n",
8439 be32_to_cpu(cmd->action_to_len16));
8440 return;
8441 }
8442
8443 fec = fwcap_to_cc_fec(acaps);
8444 fc = fwcap_to_cc_pause(linkattr);
8445 speed = fwcap_to_speed(linkattr);
8446
8447 lc->new_module = false;
8448 lc->redo_l1cfg = false;
8449
8450 if (mod_type != pi->mod_type) {
8451 /* With the newer SFP28 and QSFP28 Transceiver Module Types,
8452 * various fundamental Port Capabilities which used to be
8453 * immutable can now change radically. We can now have
8454 * Speeds, Auto-Negotiation, Forward Error Correction, etc.
8455 * all change based on what Transceiver Module is inserted.
8456 * So we need to record the Physical "Port" Capabilities on
8457 * every Transceiver Module change.
8458 */
8459 lc->pcaps = pcaps;
8460
8461 /* When a new Transceiver Module is inserted, the Firmware
8462 * will examine its i2c EPROM to determine its type and
8463 * general operating parameters including things like Forward
8464 * Error Control, etc. Various IEEE 802.3 standards dictate
8465 * how to interpret these i2c values to determine default
8466 * "sutomatic" settings. We record these for future use when
8467 * the user explicitly requests these standards-based values.
8468 */
8469 lc->def_acaps = acaps;
8470
8471 /* Some versions of the early T6 Firmware "cheated" when
8472 * handling different Transceiver Modules by changing the
8473 * underlaying Port Type reported to the Host Drivers. As
8474 * such we need to capture whatever Port Type the Firmware
8475 * sends us and record it in case it's different from what we
8476 * were told earlier. Unfortunately, since Firmware is
8477 * forever, we'll need to keep this code here forever, but in
8478 * later T6 Firmware it should just be an assignment of the
8479 * same value already recorded.
8480 */
8481 pi->port_type = port_type;
8482
8483 pi->mod_type = mod_type;
8484
8485 lc->new_module = t4_is_inserted_mod_type(mod_type);
8486 t4_os_portmod_changed(adapter, pi->port_id);
8487 }
8488
8489 if (link_ok != lc->link_ok || speed != lc->speed ||
8490 fc != lc->fc || fec != lc->fec) { /* something changed */
8491 if (!link_ok && lc->link_ok) {
8492 lc->link_down_rc = linkdnrc;
8493 dev_warn(adapter->pdev_dev, "Port %d link down, reason: %s\n",
8494 pi->tx_chan, t4_link_down_rc_str(linkdnrc));
8495 }
8496 lc->link_ok = link_ok;
8497 lc->speed = speed;
8498 lc->fc = fc;
8499 lc->fec = fec;
8500
8501 lc->lpacaps = lpacaps;
8502 lc->acaps = acaps & ADVERT_MASK;
8503
8504 if (!(lc->acaps & FW_PORT_CAP32_ANEG)) {
8505 lc->autoneg = AUTONEG_DISABLE;
8506 } else if (lc->acaps & FW_PORT_CAP32_ANEG) {
8507 lc->autoneg = AUTONEG_ENABLE;
8508 } else {
8509 /* When Autoneg is disabled, user needs to set
8510 * single speed.
8511 * Similar to cxgb4_ethtool.c: set_link_ksettings
8512 */
8513 lc->acaps = 0;
8514 lc->speed_caps = fwcap_to_fwspeed(acaps);
8515 lc->autoneg = AUTONEG_DISABLE;
8516 }
8517
8518 t4_os_link_changed(adapter, pi->port_id, link_ok);
8519 }
8520
8521 if (lc->new_module && lc->redo_l1cfg) {
8522 struct link_config old_lc;
8523 int ret;
8524
8525 /* Save the current L1 Configuration and restore it if an
8526 * error occurs. We probably should fix the l1_cfg*()
8527 * routines not to change the link_config when an error
8528 * occurs ...
8529 */
8530 old_lc = *lc;
8531 ret = t4_link_l1cfg_ns(adapter, adapter->mbox, pi->lport, lc);
8532 if (ret) {
8533 *lc = old_lc;
8534 dev_warn(adapter->pdev_dev,
8535 "Attempt to update new Transceiver Module settings failed\n");
8536 }
8537 }
8538 lc->new_module = false;
8539 lc->redo_l1cfg = false;
8540 }
8541
8542 /**
8543 * t4_update_port_info - retrieve and update port information if changed
8544 * @pi: the port_info
8545 *
8546 * We issue a Get Port Information Command to the Firmware and, if
8547 * successful, we check to see if anything is different from what we
8548 * last recorded and update things accordingly.
8549 */
t4_update_port_info(struct port_info * pi)8550 int t4_update_port_info(struct port_info *pi)
8551 {
8552 unsigned int fw_caps = pi->adapter->params.fw_caps_support;
8553 struct fw_port_cmd port_cmd;
8554 int ret;
8555
8556 memset(&port_cmd, 0, sizeof(port_cmd));
8557 port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
8558 FW_CMD_REQUEST_F | FW_CMD_READ_F |
8559 FW_PORT_CMD_PORTID_V(pi->tx_chan));
8560 port_cmd.action_to_len16 = cpu_to_be32(
8561 FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
8562 ? FW_PORT_ACTION_GET_PORT_INFO
8563 : FW_PORT_ACTION_GET_PORT_INFO32) |
8564 FW_LEN16(port_cmd));
8565 ret = t4_wr_mbox(pi->adapter, pi->adapter->mbox,
8566 &port_cmd, sizeof(port_cmd), &port_cmd);
8567 if (ret)
8568 return ret;
8569
8570 t4_handle_get_port_info(pi, (__be64 *)&port_cmd);
8571 return 0;
8572 }
8573
8574 /**
8575 * t4_get_link_params - retrieve basic link parameters for given port
8576 * @pi: the port
8577 * @link_okp: value return pointer for link up/down
8578 * @speedp: value return pointer for speed (Mb/s)
8579 * @mtup: value return pointer for mtu
8580 *
8581 * Retrieves basic link parameters for a port: link up/down, speed (Mb/s),
8582 * and MTU for a specified port. A negative error is returned on
8583 * failure; 0 on success.
8584 */
t4_get_link_params(struct port_info * pi,unsigned int * link_okp,unsigned int * speedp,unsigned int * mtup)8585 int t4_get_link_params(struct port_info *pi, unsigned int *link_okp,
8586 unsigned int *speedp, unsigned int *mtup)
8587 {
8588 unsigned int fw_caps = pi->adapter->params.fw_caps_support;
8589 struct fw_port_cmd port_cmd;
8590 unsigned int action, link_ok, speed, mtu;
8591 fw_port_cap32_t linkattr;
8592 int ret;
8593
8594 memset(&port_cmd, 0, sizeof(port_cmd));
8595 port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
8596 FW_CMD_REQUEST_F | FW_CMD_READ_F |
8597 FW_PORT_CMD_PORTID_V(pi->tx_chan));
8598 action = (fw_caps == FW_CAPS16
8599 ? FW_PORT_ACTION_GET_PORT_INFO
8600 : FW_PORT_ACTION_GET_PORT_INFO32);
8601 port_cmd.action_to_len16 = cpu_to_be32(
8602 FW_PORT_CMD_ACTION_V(action) |
8603 FW_LEN16(port_cmd));
8604 ret = t4_wr_mbox(pi->adapter, pi->adapter->mbox,
8605 &port_cmd, sizeof(port_cmd), &port_cmd);
8606 if (ret)
8607 return ret;
8608
8609 if (action == FW_PORT_ACTION_GET_PORT_INFO) {
8610 u32 lstatus = be32_to_cpu(port_cmd.u.info.lstatus_to_modtype);
8611
8612 link_ok = !!(lstatus & FW_PORT_CMD_LSTATUS_F);
8613 linkattr = lstatus_to_fwcap(lstatus);
8614 mtu = be16_to_cpu(port_cmd.u.info.mtu);
8615 } else {
8616 u32 lstatus32 =
8617 be32_to_cpu(port_cmd.u.info32.lstatus32_to_cbllen32);
8618
8619 link_ok = !!(lstatus32 & FW_PORT_CMD_LSTATUS32_F);
8620 linkattr = be32_to_cpu(port_cmd.u.info32.linkattr32);
8621 mtu = FW_PORT_CMD_MTU32_G(
8622 be32_to_cpu(port_cmd.u.info32.auxlinfo32_mtu32));
8623 }
8624 speed = fwcap_to_speed(linkattr);
8625
8626 *link_okp = link_ok;
8627 *speedp = fwcap_to_speed(linkattr);
8628 *mtup = mtu;
8629
8630 return 0;
8631 }
8632
8633 /**
8634 * t4_handle_fw_rpl - process a FW reply message
8635 * @adap: the adapter
8636 * @rpl: start of the FW message
8637 *
8638 * Processes a FW message, such as link state change messages.
8639 */
t4_handle_fw_rpl(struct adapter * adap,const __be64 * rpl)8640 int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
8641 {
8642 u8 opcode = *(const u8 *)rpl;
8643
8644 /* This might be a port command ... this simplifies the following
8645 * conditionals ... We can get away with pre-dereferencing
8646 * action_to_len16 because it's in the first 16 bytes and all messages
8647 * will be at least that long.
8648 */
8649 const struct fw_port_cmd *p = (const void *)rpl;
8650 unsigned int action =
8651 FW_PORT_CMD_ACTION_G(be32_to_cpu(p->action_to_len16));
8652
8653 if (opcode == FW_PORT_CMD &&
8654 (action == FW_PORT_ACTION_GET_PORT_INFO ||
8655 action == FW_PORT_ACTION_GET_PORT_INFO32)) {
8656 int i;
8657 int chan = FW_PORT_CMD_PORTID_G(be32_to_cpu(p->op_to_portid));
8658 struct port_info *pi = NULL;
8659
8660 for_each_port(adap, i) {
8661 pi = adap2pinfo(adap, i);
8662 if (pi->tx_chan == chan)
8663 break;
8664 }
8665
8666 t4_handle_get_port_info(pi, rpl);
8667 } else {
8668 dev_warn(adap->pdev_dev, "Unknown firmware reply %d\n",
8669 opcode);
8670 return -EINVAL;
8671 }
8672 return 0;
8673 }
8674
get_pci_mode(struct adapter * adapter,struct pci_params * p)8675 static void get_pci_mode(struct adapter *adapter, struct pci_params *p)
8676 {
8677 u16 val;
8678
8679 if (pci_is_pcie(adapter->pdev)) {
8680 pcie_capability_read_word(adapter->pdev, PCI_EXP_LNKSTA, &val);
8681 p->speed = val & PCI_EXP_LNKSTA_CLS;
8682 p->width = (val & PCI_EXP_LNKSTA_NLW) >> 4;
8683 }
8684 }
8685
8686 /**
8687 * init_link_config - initialize a link's SW state
8688 * @lc: pointer to structure holding the link state
8689 * @pcaps: link Port Capabilities
8690 * @acaps: link current Advertised Port Capabilities
8691 *
8692 * Initializes the SW state maintained for each link, including the link's
8693 * capabilities and default speed/flow-control/autonegotiation settings.
8694 */
init_link_config(struct link_config * lc,fw_port_cap32_t pcaps,fw_port_cap32_t acaps)8695 static void init_link_config(struct link_config *lc, fw_port_cap32_t pcaps,
8696 fw_port_cap32_t acaps)
8697 {
8698 lc->pcaps = pcaps;
8699 lc->def_acaps = acaps;
8700 lc->lpacaps = 0;
8701 lc->speed_caps = 0;
8702 lc->speed = 0;
8703 lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
8704
8705 /* For Forward Error Control, we default to whatever the Firmware
8706 * tells us the Link is currently advertising.
8707 */
8708 lc->requested_fec = FEC_AUTO;
8709 lc->fec = fwcap_to_cc_fec(lc->def_acaps);
8710
8711 /* If the Port is capable of Auto-Negtotiation, initialize it as
8712 * "enabled" and copy over all of the Physical Port Capabilities
8713 * to the Advertised Port Capabilities. Otherwise mark it as
8714 * Auto-Negotiate disabled and select the highest supported speed
8715 * for the link. Note parallel structure in t4_link_l1cfg_core()
8716 * and t4_handle_get_port_info().
8717 */
8718 if (lc->pcaps & FW_PORT_CAP32_ANEG) {
8719 lc->acaps = lc->pcaps & ADVERT_MASK;
8720 lc->autoneg = AUTONEG_ENABLE;
8721 lc->requested_fc |= PAUSE_AUTONEG;
8722 } else {
8723 lc->acaps = 0;
8724 lc->autoneg = AUTONEG_DISABLE;
8725 lc->speed_caps = fwcap_to_fwspeed(acaps);
8726 }
8727 }
8728
8729 #define CIM_PF_NOACCESS 0xeeeeeeee
8730
t4_wait_dev_ready(void __iomem * regs)8731 int t4_wait_dev_ready(void __iomem *regs)
8732 {
8733 u32 whoami;
8734
8735 whoami = readl(regs + PL_WHOAMI_A);
8736 if (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS)
8737 return 0;
8738
8739 msleep(500);
8740 whoami = readl(regs + PL_WHOAMI_A);
8741 return (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS ? 0 : -EIO);
8742 }
8743
8744 struct flash_desc {
8745 u32 vendor_and_model_id;
8746 u32 size_mb;
8747 };
8748
t4_get_flash_params(struct adapter * adap)8749 static int t4_get_flash_params(struct adapter *adap)
8750 {
8751 /* Table for non-Numonix supported flash parts. Numonix parts are left
8752 * to the preexisting code. All flash parts have 64KB sectors.
8753 */
8754 static struct flash_desc supported_flash[] = {
8755 { 0x150201, 4 << 20 }, /* Spansion 4MB S25FL032P */
8756 };
8757
8758 unsigned int part, manufacturer;
8759 unsigned int density, size = 0;
8760 u32 flashid = 0;
8761 int ret;
8762
8763 /* Issue a Read ID Command to the Flash part. We decode supported
8764 * Flash parts and their sizes from this. There's a newer Query
8765 * Command which can retrieve detailed geometry information but many
8766 * Flash parts don't support it.
8767 */
8768
8769 ret = sf1_write(adap, 1, 1, 0, SF_RD_ID);
8770 if (!ret)
8771 ret = sf1_read(adap, 3, 0, 1, &flashid);
8772 t4_write_reg(adap, SF_OP_A, 0); /* unlock SF */
8773 if (ret)
8774 return ret;
8775
8776 /* Check to see if it's one of our non-standard supported Flash parts.
8777 */
8778 for (part = 0; part < ARRAY_SIZE(supported_flash); part++)
8779 if (supported_flash[part].vendor_and_model_id == flashid) {
8780 adap->params.sf_size = supported_flash[part].size_mb;
8781 adap->params.sf_nsec =
8782 adap->params.sf_size / SF_SEC_SIZE;
8783 goto found;
8784 }
8785
8786 /* Decode Flash part size. The code below looks repetative with
8787 * common encodings, but that's not guaranteed in the JEDEC
8788 * specification for the Read JADEC ID command. The only thing that
8789 * we're guaranteed by the JADEC specification is where the
8790 * Manufacturer ID is in the returned result. After that each
8791 * Manufacturer ~could~ encode things completely differently.
8792 * Note, all Flash parts must have 64KB sectors.
8793 */
8794 manufacturer = flashid & 0xff;
8795 switch (manufacturer) {
8796 case 0x20: { /* Micron/Numonix */
8797 /* This Density -> Size decoding table is taken from Micron
8798 * Data Sheets.
8799 */
8800 density = (flashid >> 16) & 0xff;
8801 switch (density) {
8802 case 0x14: /* 1MB */
8803 size = 1 << 20;
8804 break;
8805 case 0x15: /* 2MB */
8806 size = 1 << 21;
8807 break;
8808 case 0x16: /* 4MB */
8809 size = 1 << 22;
8810 break;
8811 case 0x17: /* 8MB */
8812 size = 1 << 23;
8813 break;
8814 case 0x18: /* 16MB */
8815 size = 1 << 24;
8816 break;
8817 case 0x19: /* 32MB */
8818 size = 1 << 25;
8819 break;
8820 case 0x20: /* 64MB */
8821 size = 1 << 26;
8822 break;
8823 case 0x21: /* 128MB */
8824 size = 1 << 27;
8825 break;
8826 case 0x22: /* 256MB */
8827 size = 1 << 28;
8828 break;
8829 }
8830 break;
8831 }
8832 case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */
8833 /* This Density -> Size decoding table is taken from ISSI
8834 * Data Sheets.
8835 */
8836 density = (flashid >> 16) & 0xff;
8837 switch (density) {
8838 case 0x16: /* 32 MB */
8839 size = 1 << 25;
8840 break;
8841 case 0x17: /* 64MB */
8842 size = 1 << 26;
8843 break;
8844 }
8845 break;
8846 }
8847 case 0xc2: { /* Macronix */
8848 /* This Density -> Size decoding table is taken from Macronix
8849 * Data Sheets.
8850 */
8851 density = (flashid >> 16) & 0xff;
8852 switch (density) {
8853 case 0x17: /* 8MB */
8854 size = 1 << 23;
8855 break;
8856 case 0x18: /* 16MB */
8857 size = 1 << 24;
8858 break;
8859 }
8860 break;
8861 }
8862 case 0xef: { /* Winbond */
8863 /* This Density -> Size decoding table is taken from Winbond
8864 * Data Sheets.
8865 */
8866 density = (flashid >> 16) & 0xff;
8867 switch (density) {
8868 case 0x17: /* 8MB */
8869 size = 1 << 23;
8870 break;
8871 case 0x18: /* 16MB */
8872 size = 1 << 24;
8873 break;
8874 }
8875 break;
8876 }
8877 }
8878
8879 /* If we didn't recognize the FLASH part, that's no real issue: the
8880 * Hardware/Software contract says that Hardware will _*ALWAYS*_
8881 * use a FLASH part which is at least 4MB in size and has 64KB
8882 * sectors. The unrecognized FLASH part is likely to be much larger
8883 * than 4MB, but that's all we really need.
8884 */
8885 if (size == 0) {
8886 dev_warn(adap->pdev_dev, "Unknown Flash Part, ID = %#x, assuming 4MB\n",
8887 flashid);
8888 size = 1 << 22;
8889 }
8890
8891 /* Store decoded Flash size and fall through into vetting code. */
8892 adap->params.sf_size = size;
8893 adap->params.sf_nsec = size / SF_SEC_SIZE;
8894
8895 found:
8896 if (adap->params.sf_size < FLASH_MIN_SIZE)
8897 dev_warn(adap->pdev_dev, "WARNING: Flash Part ID %#x, size %#x < %#x\n",
8898 flashid, adap->params.sf_size, FLASH_MIN_SIZE);
8899 return 0;
8900 }
8901
8902 /**
8903 * t4_prep_adapter - prepare SW and HW for operation
8904 * @adapter: the adapter
8905 * @reset: if true perform a HW reset
8906 *
8907 * Initialize adapter SW state for the various HW modules, set initial
8908 * values for some adapter tunables, take PHYs out of reset, and
8909 * initialize the MDIO interface.
8910 */
t4_prep_adapter(struct adapter * adapter)8911 int t4_prep_adapter(struct adapter *adapter)
8912 {
8913 int ret, ver;
8914 uint16_t device_id;
8915 u32 pl_rev;
8916
8917 get_pci_mode(adapter, &adapter->params.pci);
8918 pl_rev = REV_G(t4_read_reg(adapter, PL_REV_A));
8919
8920 ret = t4_get_flash_params(adapter);
8921 if (ret < 0) {
8922 dev_err(adapter->pdev_dev, "error %d identifying flash\n", ret);
8923 return ret;
8924 }
8925
8926 /* Retrieve adapter's device ID
8927 */
8928 pci_read_config_word(adapter->pdev, PCI_DEVICE_ID, &device_id);
8929 ver = device_id >> 12;
8930 adapter->params.chip = 0;
8931 switch (ver) {
8932 case CHELSIO_T4:
8933 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T4, pl_rev);
8934 adapter->params.arch.sge_fl_db = DBPRIO_F;
8935 adapter->params.arch.mps_tcam_size =
8936 NUM_MPS_CLS_SRAM_L_INSTANCES;
8937 adapter->params.arch.mps_rplc_size = 128;
8938 adapter->params.arch.nchan = NCHAN;
8939 adapter->params.arch.pm_stats_cnt = PM_NSTATS;
8940 adapter->params.arch.vfcount = 128;
8941 /* Congestion map is for 4 channels so that
8942 * MPS can have 4 priority per port.
8943 */
8944 adapter->params.arch.cng_ch_bits_log = 2;
8945 break;
8946 case CHELSIO_T5:
8947 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev);
8948 adapter->params.arch.sge_fl_db = DBPRIO_F | DBTYPE_F;
8949 adapter->params.arch.mps_tcam_size =
8950 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
8951 adapter->params.arch.mps_rplc_size = 128;
8952 adapter->params.arch.nchan = NCHAN;
8953 adapter->params.arch.pm_stats_cnt = PM_NSTATS;
8954 adapter->params.arch.vfcount = 128;
8955 adapter->params.arch.cng_ch_bits_log = 2;
8956 break;
8957 case CHELSIO_T6:
8958 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
8959 adapter->params.arch.sge_fl_db = 0;
8960 adapter->params.arch.mps_tcam_size =
8961 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
8962 adapter->params.arch.mps_rplc_size = 256;
8963 adapter->params.arch.nchan = 2;
8964 adapter->params.arch.pm_stats_cnt = T6_PM_NSTATS;
8965 adapter->params.arch.vfcount = 256;
8966 /* Congestion map will be for 2 channels so that
8967 * MPS can have 8 priority per port.
8968 */
8969 adapter->params.arch.cng_ch_bits_log = 3;
8970 break;
8971 default:
8972 dev_err(adapter->pdev_dev, "Device %d is not supported\n",
8973 device_id);
8974 return -EINVAL;
8975 }
8976
8977 adapter->params.cim_la_size = CIMLA_SIZE;
8978 init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd);
8979
8980 /*
8981 * Default port for debugging in case we can't reach FW.
8982 */
8983 adapter->params.nports = 1;
8984 adapter->params.portvec = 1;
8985 adapter->params.vpd.cclk = 50000;
8986
8987 /* Set PCIe completion timeout to 4 seconds. */
8988 pcie_capability_clear_and_set_word(adapter->pdev, PCI_EXP_DEVCTL2,
8989 PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0xd);
8990 return 0;
8991 }
8992
8993 /**
8994 * t4_shutdown_adapter - shut down adapter, host & wire
8995 * @adapter: the adapter
8996 *
8997 * Perform an emergency shutdown of the adapter and stop it from
8998 * continuing any further communication on the ports or DMA to the
8999 * host. This is typically used when the adapter and/or firmware
9000 * have crashed and we want to prevent any further accidental
9001 * communication with the rest of the world. This will also force
9002 * the port Link Status to go down -- if register writes work --
9003 * which should help our peers figure out that we're down.
9004 */
t4_shutdown_adapter(struct adapter * adapter)9005 int t4_shutdown_adapter(struct adapter *adapter)
9006 {
9007 int port;
9008
9009 t4_intr_disable(adapter);
9010 t4_write_reg(adapter, DBG_GPIO_EN_A, 0);
9011 for_each_port(adapter, port) {
9012 u32 a_port_cfg = is_t4(adapter->params.chip) ?
9013 PORT_REG(port, XGMAC_PORT_CFG_A) :
9014 T5_PORT_REG(port, MAC_PORT_CFG_A);
9015
9016 t4_write_reg(adapter, a_port_cfg,
9017 t4_read_reg(adapter, a_port_cfg)
9018 & ~SIGNAL_DET_V(1));
9019 }
9020 t4_set_reg_field(adapter, SGE_CONTROL_A, GLOBALENABLE_F, 0);
9021
9022 return 0;
9023 }
9024
9025 /**
9026 * t4_bar2_sge_qregs - return BAR2 SGE Queue register information
9027 * @adapter: the adapter
9028 * @qid: the Queue ID
9029 * @qtype: the Ingress or Egress type for @qid
9030 * @user: true if this request is for a user mode queue
9031 * @pbar2_qoffset: BAR2 Queue Offset
9032 * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues
9033 *
9034 * Returns the BAR2 SGE Queue Registers information associated with the
9035 * indicated Absolute Queue ID. These are passed back in return value
9036 * pointers. @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue
9037 * and T4_BAR2_QTYPE_INGRESS for Ingress Queues.
9038 *
9039 * This may return an error which indicates that BAR2 SGE Queue
9040 * registers aren't available. If an error is not returned, then the
9041 * following values are returned:
9042 *
9043 * *@pbar2_qoffset: the BAR2 Offset of the @qid Registers
9044 * *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid
9045 *
9046 * If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which
9047 * require the "Inferred Queue ID" ability may be used. E.g. the
9048 * Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0,
9049 * then these "Inferred Queue ID" register may not be used.
9050 */
t4_bar2_sge_qregs(struct adapter * adapter,unsigned int qid,enum t4_bar2_qtype qtype,int user,u64 * pbar2_qoffset,unsigned int * pbar2_qid)9051 int t4_bar2_sge_qregs(struct adapter *adapter,
9052 unsigned int qid,
9053 enum t4_bar2_qtype qtype,
9054 int user,
9055 u64 *pbar2_qoffset,
9056 unsigned int *pbar2_qid)
9057 {
9058 unsigned int page_shift, page_size, qpp_shift, qpp_mask;
9059 u64 bar2_page_offset, bar2_qoffset;
9060 unsigned int bar2_qid, bar2_qid_offset, bar2_qinferred;
9061
9062 /* T4 doesn't support BAR2 SGE Queue registers for kernel mode queues */
9063 if (!user && is_t4(adapter->params.chip))
9064 return -EINVAL;
9065
9066 /* Get our SGE Page Size parameters.
9067 */
9068 page_shift = adapter->params.sge.hps + 10;
9069 page_size = 1 << page_shift;
9070
9071 /* Get the right Queues per Page parameters for our Queue.
9072 */
9073 qpp_shift = (qtype == T4_BAR2_QTYPE_EGRESS
9074 ? adapter->params.sge.eq_qpp
9075 : adapter->params.sge.iq_qpp);
9076 qpp_mask = (1 << qpp_shift) - 1;
9077
9078 /* Calculate the basics of the BAR2 SGE Queue register area:
9079 * o The BAR2 page the Queue registers will be in.
9080 * o The BAR2 Queue ID.
9081 * o The BAR2 Queue ID Offset into the BAR2 page.
9082 */
9083 bar2_page_offset = ((u64)(qid >> qpp_shift) << page_shift);
9084 bar2_qid = qid & qpp_mask;
9085 bar2_qid_offset = bar2_qid * SGE_UDB_SIZE;
9086
9087 /* If the BAR2 Queue ID Offset is less than the Page Size, then the
9088 * hardware will infer the Absolute Queue ID simply from the writes to
9089 * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a
9090 * BAR2 Queue ID of 0 for those writes). Otherwise, we'll simply
9091 * write to the first BAR2 SGE Queue Area within the BAR2 Page with
9092 * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID
9093 * from the BAR2 Page and BAR2 Queue ID.
9094 *
9095 * One important censequence of this is that some BAR2 SGE registers
9096 * have a "Queue ID" field and we can write the BAR2 SGE Queue ID
9097 * there. But other registers synthesize the SGE Queue ID purely
9098 * from the writes to the registers -- the Write Combined Doorbell
9099 * Buffer is a good example. These BAR2 SGE Registers are only
9100 * available for those BAR2 SGE Register areas where the SGE Absolute
9101 * Queue ID can be inferred from simple writes.
9102 */
9103 bar2_qoffset = bar2_page_offset;
9104 bar2_qinferred = (bar2_qid_offset < page_size);
9105 if (bar2_qinferred) {
9106 bar2_qoffset += bar2_qid_offset;
9107 bar2_qid = 0;
9108 }
9109
9110 *pbar2_qoffset = bar2_qoffset;
9111 *pbar2_qid = bar2_qid;
9112 return 0;
9113 }
9114
9115 /**
9116 * t4_init_devlog_params - initialize adapter->params.devlog
9117 * @adap: the adapter
9118 *
9119 * Initialize various fields of the adapter's Firmware Device Log
9120 * Parameters structure.
9121 */
t4_init_devlog_params(struct adapter * adap)9122 int t4_init_devlog_params(struct adapter *adap)
9123 {
9124 struct devlog_params *dparams = &adap->params.devlog;
9125 u32 pf_dparams;
9126 unsigned int devlog_meminfo;
9127 struct fw_devlog_cmd devlog_cmd;
9128 int ret;
9129
9130 /* If we're dealing with newer firmware, the Device Log Paramerters
9131 * are stored in a designated register which allows us to access the
9132 * Device Log even if we can't talk to the firmware.
9133 */
9134 pf_dparams =
9135 t4_read_reg(adap, PCIE_FW_REG(PCIE_FW_PF_A, PCIE_FW_PF_DEVLOG));
9136 if (pf_dparams) {
9137 unsigned int nentries, nentries128;
9138
9139 dparams->memtype = PCIE_FW_PF_DEVLOG_MEMTYPE_G(pf_dparams);
9140 dparams->start = PCIE_FW_PF_DEVLOG_ADDR16_G(pf_dparams) << 4;
9141
9142 nentries128 = PCIE_FW_PF_DEVLOG_NENTRIES128_G(pf_dparams);
9143 nentries = (nentries128 + 1) * 128;
9144 dparams->size = nentries * sizeof(struct fw_devlog_e);
9145
9146 return 0;
9147 }
9148
9149 /* Otherwise, ask the firmware for it's Device Log Parameters.
9150 */
9151 memset(&devlog_cmd, 0, sizeof(devlog_cmd));
9152 devlog_cmd.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_DEVLOG_CMD) |
9153 FW_CMD_REQUEST_F | FW_CMD_READ_F);
9154 devlog_cmd.retval_len16 = cpu_to_be32(FW_LEN16(devlog_cmd));
9155 ret = t4_wr_mbox(adap, adap->mbox, &devlog_cmd, sizeof(devlog_cmd),
9156 &devlog_cmd);
9157 if (ret)
9158 return ret;
9159
9160 devlog_meminfo =
9161 be32_to_cpu(devlog_cmd.memtype_devlog_memaddr16_devlog);
9162 dparams->memtype = FW_DEVLOG_CMD_MEMTYPE_DEVLOG_G(devlog_meminfo);
9163 dparams->start = FW_DEVLOG_CMD_MEMADDR16_DEVLOG_G(devlog_meminfo) << 4;
9164 dparams->size = be32_to_cpu(devlog_cmd.memsize_devlog);
9165
9166 return 0;
9167 }
9168
9169 /**
9170 * t4_init_sge_params - initialize adap->params.sge
9171 * @adapter: the adapter
9172 *
9173 * Initialize various fields of the adapter's SGE Parameters structure.
9174 */
t4_init_sge_params(struct adapter * adapter)9175 int t4_init_sge_params(struct adapter *adapter)
9176 {
9177 struct sge_params *sge_params = &adapter->params.sge;
9178 u32 hps, qpp;
9179 unsigned int s_hps, s_qpp;
9180
9181 /* Extract the SGE Page Size for our PF.
9182 */
9183 hps = t4_read_reg(adapter, SGE_HOST_PAGE_SIZE_A);
9184 s_hps = (HOSTPAGESIZEPF0_S +
9185 (HOSTPAGESIZEPF1_S - HOSTPAGESIZEPF0_S) * adapter->pf);
9186 sge_params->hps = ((hps >> s_hps) & HOSTPAGESIZEPF0_M);
9187
9188 /* Extract the SGE Egress and Ingess Queues Per Page for our PF.
9189 */
9190 s_qpp = (QUEUESPERPAGEPF0_S +
9191 (QUEUESPERPAGEPF1_S - QUEUESPERPAGEPF0_S) * adapter->pf);
9192 qpp = t4_read_reg(adapter, SGE_EGRESS_QUEUES_PER_PAGE_PF_A);
9193 sge_params->eq_qpp = ((qpp >> s_qpp) & QUEUESPERPAGEPF0_M);
9194 qpp = t4_read_reg(adapter, SGE_INGRESS_QUEUES_PER_PAGE_PF_A);
9195 sge_params->iq_qpp = ((qpp >> s_qpp) & QUEUESPERPAGEPF0_M);
9196
9197 return 0;
9198 }
9199
9200 /**
9201 * t4_init_tp_params - initialize adap->params.tp
9202 * @adap: the adapter
9203 * @sleep_ok: if true we may sleep while awaiting command completion
9204 *
9205 * Initialize various fields of the adapter's TP Parameters structure.
9206 */
t4_init_tp_params(struct adapter * adap,bool sleep_ok)9207 int t4_init_tp_params(struct adapter *adap, bool sleep_ok)
9208 {
9209 int chan;
9210 u32 v;
9211
9212 v = t4_read_reg(adap, TP_TIMER_RESOLUTION_A);
9213 adap->params.tp.tre = TIMERRESOLUTION_G(v);
9214 adap->params.tp.dack_re = DELAYEDACKRESOLUTION_G(v);
9215
9216 /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */
9217 for (chan = 0; chan < NCHAN; chan++)
9218 adap->params.tp.tx_modq[chan] = chan;
9219
9220 /* Cache the adapter's Compressed Filter Mode and global Incress
9221 * Configuration.
9222 */
9223 t4_tp_pio_read(adap, &adap->params.tp.vlan_pri_map, 1,
9224 TP_VLAN_PRI_MAP_A, sleep_ok);
9225 t4_tp_pio_read(adap, &adap->params.tp.ingress_config, 1,
9226 TP_INGRESS_CONFIG_A, sleep_ok);
9227
9228 /* For T6, cache the adapter's compressed error vector
9229 * and passing outer header info for encapsulated packets.
9230 */
9231 if (CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) {
9232 v = t4_read_reg(adap, TP_OUT_CONFIG_A);
9233 adap->params.tp.rx_pkt_encap = (v & CRXPKTENC_F) ? 1 : 0;
9234 }
9235
9236 /* Now that we have TP_VLAN_PRI_MAP cached, we can calculate the field
9237 * shift positions of several elements of the Compressed Filter Tuple
9238 * for this adapter which we need frequently ...
9239 */
9240 adap->params.tp.fcoe_shift = t4_filter_field_shift(adap, FCOE_F);
9241 adap->params.tp.port_shift = t4_filter_field_shift(adap, PORT_F);
9242 adap->params.tp.vnic_shift = t4_filter_field_shift(adap, VNIC_ID_F);
9243 adap->params.tp.vlan_shift = t4_filter_field_shift(adap, VLAN_F);
9244 adap->params.tp.tos_shift = t4_filter_field_shift(adap, TOS_F);
9245 adap->params.tp.protocol_shift = t4_filter_field_shift(adap,
9246 PROTOCOL_F);
9247 adap->params.tp.ethertype_shift = t4_filter_field_shift(adap,
9248 ETHERTYPE_F);
9249 adap->params.tp.macmatch_shift = t4_filter_field_shift(adap,
9250 MACMATCH_F);
9251 adap->params.tp.matchtype_shift = t4_filter_field_shift(adap,
9252 MPSHITTYPE_F);
9253 adap->params.tp.frag_shift = t4_filter_field_shift(adap,
9254 FRAGMENTATION_F);
9255
9256 /* If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID
9257 * represents the presence of an Outer VLAN instead of a VNIC ID.
9258 */
9259 if ((adap->params.tp.ingress_config & VNIC_F) == 0)
9260 adap->params.tp.vnic_shift = -1;
9261
9262 v = t4_read_reg(adap, LE_3_DB_HASH_MASK_GEN_IPV4_T6_A);
9263 adap->params.tp.hash_filter_mask = v;
9264 v = t4_read_reg(adap, LE_4_DB_HASH_MASK_GEN_IPV4_T6_A);
9265 adap->params.tp.hash_filter_mask |= ((u64)v << 32);
9266 return 0;
9267 }
9268
9269 /**
9270 * t4_filter_field_shift - calculate filter field shift
9271 * @adap: the adapter
9272 * @filter_sel: the desired field (from TP_VLAN_PRI_MAP bits)
9273 *
9274 * Return the shift position of a filter field within the Compressed
9275 * Filter Tuple. The filter field is specified via its selection bit
9276 * within TP_VLAN_PRI_MAL (filter mode). E.g. F_VLAN.
9277 */
t4_filter_field_shift(const struct adapter * adap,int filter_sel)9278 int t4_filter_field_shift(const struct adapter *adap, int filter_sel)
9279 {
9280 unsigned int filter_mode = adap->params.tp.vlan_pri_map;
9281 unsigned int sel;
9282 int field_shift;
9283
9284 if ((filter_mode & filter_sel) == 0)
9285 return -1;
9286
9287 for (sel = 1, field_shift = 0; sel < filter_sel; sel <<= 1) {
9288 switch (filter_mode & sel) {
9289 case FCOE_F:
9290 field_shift += FT_FCOE_W;
9291 break;
9292 case PORT_F:
9293 field_shift += FT_PORT_W;
9294 break;
9295 case VNIC_ID_F:
9296 field_shift += FT_VNIC_ID_W;
9297 break;
9298 case VLAN_F:
9299 field_shift += FT_VLAN_W;
9300 break;
9301 case TOS_F:
9302 field_shift += FT_TOS_W;
9303 break;
9304 case PROTOCOL_F:
9305 field_shift += FT_PROTOCOL_W;
9306 break;
9307 case ETHERTYPE_F:
9308 field_shift += FT_ETHERTYPE_W;
9309 break;
9310 case MACMATCH_F:
9311 field_shift += FT_MACMATCH_W;
9312 break;
9313 case MPSHITTYPE_F:
9314 field_shift += FT_MPSHITTYPE_W;
9315 break;
9316 case FRAGMENTATION_F:
9317 field_shift += FT_FRAGMENTATION_W;
9318 break;
9319 }
9320 }
9321 return field_shift;
9322 }
9323
t4_init_rss_mode(struct adapter * adap,int mbox)9324 int t4_init_rss_mode(struct adapter *adap, int mbox)
9325 {
9326 int i, ret;
9327 struct fw_rss_vi_config_cmd rvc;
9328
9329 memset(&rvc, 0, sizeof(rvc));
9330
9331 for_each_port(adap, i) {
9332 struct port_info *p = adap2pinfo(adap, i);
9333
9334 rvc.op_to_viid =
9335 cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) |
9336 FW_CMD_REQUEST_F | FW_CMD_READ_F |
9337 FW_RSS_VI_CONFIG_CMD_VIID_V(p->viid));
9338 rvc.retval_len16 = cpu_to_be32(FW_LEN16(rvc));
9339 ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc);
9340 if (ret)
9341 return ret;
9342 p->rss_mode = be32_to_cpu(rvc.u.basicvirtual.defaultq_to_udpen);
9343 }
9344 return 0;
9345 }
9346
9347 /**
9348 * t4_init_portinfo - allocate a virtual interface and initialize port_info
9349 * @pi: the port_info
9350 * @mbox: mailbox to use for the FW command
9351 * @port: physical port associated with the VI
9352 * @pf: the PF owning the VI
9353 * @vf: the VF owning the VI
9354 * @mac: the MAC address of the VI
9355 *
9356 * Allocates a virtual interface for the given physical port. If @mac is
9357 * not %NULL it contains the MAC address of the VI as assigned by FW.
9358 * @mac should be large enough to hold an Ethernet address.
9359 * Returns < 0 on error.
9360 */
t4_init_portinfo(struct port_info * pi,int mbox,int port,int pf,int vf,u8 mac[])9361 int t4_init_portinfo(struct port_info *pi, int mbox,
9362 int port, int pf, int vf, u8 mac[])
9363 {
9364 struct adapter *adapter = pi->adapter;
9365 unsigned int fw_caps = adapter->params.fw_caps_support;
9366 struct fw_port_cmd cmd;
9367 unsigned int rss_size;
9368 enum fw_port_type port_type;
9369 int mdio_addr;
9370 fw_port_cap32_t pcaps, acaps;
9371 int ret;
9372
9373 /* If we haven't yet determined whether we're talking to Firmware
9374 * which knows the new 32-bit Port Capabilities, it's time to find
9375 * out now. This will also tell new Firmware to send us Port Status
9376 * Updates using the new 32-bit Port Capabilities version of the
9377 * Port Information message.
9378 */
9379 if (fw_caps == FW_CAPS_UNKNOWN) {
9380 u32 param, val;
9381
9382 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) |
9383 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_PORT_CAPS32));
9384 val = 1;
9385 ret = t4_set_params(adapter, mbox, pf, vf, 1, ¶m, &val);
9386 fw_caps = (ret == 0 ? FW_CAPS32 : FW_CAPS16);
9387 adapter->params.fw_caps_support = fw_caps;
9388 }
9389
9390 memset(&cmd, 0, sizeof(cmd));
9391 cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
9392 FW_CMD_REQUEST_F | FW_CMD_READ_F |
9393 FW_PORT_CMD_PORTID_V(port));
9394 cmd.action_to_len16 = cpu_to_be32(
9395 FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
9396 ? FW_PORT_ACTION_GET_PORT_INFO
9397 : FW_PORT_ACTION_GET_PORT_INFO32) |
9398 FW_LEN16(cmd));
9399 ret = t4_wr_mbox(pi->adapter, mbox, &cmd, sizeof(cmd), &cmd);
9400 if (ret)
9401 return ret;
9402
9403 /* Extract the various fields from the Port Information message.
9404 */
9405 if (fw_caps == FW_CAPS16) {
9406 u32 lstatus = be32_to_cpu(cmd.u.info.lstatus_to_modtype);
9407
9408 port_type = FW_PORT_CMD_PTYPE_G(lstatus);
9409 mdio_addr = ((lstatus & FW_PORT_CMD_MDIOCAP_F)
9410 ? FW_PORT_CMD_MDIOADDR_G(lstatus)
9411 : -1);
9412 pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd.u.info.pcap));
9413 acaps = fwcaps16_to_caps32(be16_to_cpu(cmd.u.info.acap));
9414 } else {
9415 u32 lstatus32 = be32_to_cpu(cmd.u.info32.lstatus32_to_cbllen32);
9416
9417 port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32);
9418 mdio_addr = ((lstatus32 & FW_PORT_CMD_MDIOCAP32_F)
9419 ? FW_PORT_CMD_MDIOADDR32_G(lstatus32)
9420 : -1);
9421 pcaps = be32_to_cpu(cmd.u.info32.pcaps32);
9422 acaps = be32_to_cpu(cmd.u.info32.acaps32);
9423 }
9424
9425 ret = t4_alloc_vi(pi->adapter, mbox, port, pf, vf, 1, mac, &rss_size);
9426 if (ret < 0)
9427 return ret;
9428
9429 pi->viid = ret;
9430 pi->tx_chan = port;
9431 pi->lport = port;
9432 pi->rss_size = rss_size;
9433
9434 pi->port_type = port_type;
9435 pi->mdio_addr = mdio_addr;
9436 pi->mod_type = FW_PORT_MOD_TYPE_NA;
9437
9438 init_link_config(&pi->link_cfg, pcaps, acaps);
9439 return 0;
9440 }
9441
t4_port_init(struct adapter * adap,int mbox,int pf,int vf)9442 int t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
9443 {
9444 u8 addr[6];
9445 int ret, i, j = 0;
9446
9447 for_each_port(adap, i) {
9448 struct port_info *pi = adap2pinfo(adap, i);
9449
9450 while ((adap->params.portvec & (1 << j)) == 0)
9451 j++;
9452
9453 ret = t4_init_portinfo(pi, mbox, j, pf, vf, addr);
9454 if (ret)
9455 return ret;
9456
9457 memcpy(adap->port[i]->dev_addr, addr, ETH_ALEN);
9458 j++;
9459 }
9460 return 0;
9461 }
9462
9463 /**
9464 * t4_read_cimq_cfg - read CIM queue configuration
9465 * @adap: the adapter
9466 * @base: holds the queue base addresses in bytes
9467 * @size: holds the queue sizes in bytes
9468 * @thres: holds the queue full thresholds in bytes
9469 *
9470 * Returns the current configuration of the CIM queues, starting with
9471 * the IBQs, then the OBQs.
9472 */
t4_read_cimq_cfg(struct adapter * adap,u16 * base,u16 * size,u16 * thres)9473 void t4_read_cimq_cfg(struct adapter *adap, u16 *base, u16 *size, u16 *thres)
9474 {
9475 unsigned int i, v;
9476 int cim_num_obq = is_t4(adap->params.chip) ?
9477 CIM_NUM_OBQ : CIM_NUM_OBQ_T5;
9478
9479 for (i = 0; i < CIM_NUM_IBQ; i++) {
9480 t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, IBQSELECT_F |
9481 QUENUMSELECT_V(i));
9482 v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A);
9483 /* value is in 256-byte units */
9484 *base++ = CIMQBASE_G(v) * 256;
9485 *size++ = CIMQSIZE_G(v) * 256;
9486 *thres++ = QUEFULLTHRSH_G(v) * 8; /* 8-byte unit */
9487 }
9488 for (i = 0; i < cim_num_obq; i++) {
9489 t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, OBQSELECT_F |
9490 QUENUMSELECT_V(i));
9491 v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A);
9492 /* value is in 256-byte units */
9493 *base++ = CIMQBASE_G(v) * 256;
9494 *size++ = CIMQSIZE_G(v) * 256;
9495 }
9496 }
9497
9498 /**
9499 * t4_read_cim_ibq - read the contents of a CIM inbound queue
9500 * @adap: the adapter
9501 * @qid: the queue index
9502 * @data: where to store the queue contents
9503 * @n: capacity of @data in 32-bit words
9504 *
9505 * Reads the contents of the selected CIM queue starting at address 0 up
9506 * to the capacity of @data. @n must be a multiple of 4. Returns < 0 on
9507 * error and the number of 32-bit words actually read on success.
9508 */
t4_read_cim_ibq(struct adapter * adap,unsigned int qid,u32 * data,size_t n)9509 int t4_read_cim_ibq(struct adapter *adap, unsigned int qid, u32 *data, size_t n)
9510 {
9511 int i, err, attempts;
9512 unsigned int addr;
9513 const unsigned int nwords = CIM_IBQ_SIZE * 4;
9514
9515 if (qid > 5 || (n & 3))
9516 return -EINVAL;
9517
9518 addr = qid * nwords;
9519 if (n > nwords)
9520 n = nwords;
9521
9522 /* It might take 3-10ms before the IBQ debug read access is allowed.
9523 * Wait for 1 Sec with a delay of 1 usec.
9524 */
9525 attempts = 1000000;
9526
9527 for (i = 0; i < n; i++, addr++) {
9528 t4_write_reg(adap, CIM_IBQ_DBG_CFG_A, IBQDBGADDR_V(addr) |
9529 IBQDBGEN_F);
9530 err = t4_wait_op_done(adap, CIM_IBQ_DBG_CFG_A, IBQDBGBUSY_F, 0,
9531 attempts, 1);
9532 if (err)
9533 return err;
9534 *data++ = t4_read_reg(adap, CIM_IBQ_DBG_DATA_A);
9535 }
9536 t4_write_reg(adap, CIM_IBQ_DBG_CFG_A, 0);
9537 return i;
9538 }
9539
9540 /**
9541 * t4_read_cim_obq - read the contents of a CIM outbound queue
9542 * @adap: the adapter
9543 * @qid: the queue index
9544 * @data: where to store the queue contents
9545 * @n: capacity of @data in 32-bit words
9546 *
9547 * Reads the contents of the selected CIM queue starting at address 0 up
9548 * to the capacity of @data. @n must be a multiple of 4. Returns < 0 on
9549 * error and the number of 32-bit words actually read on success.
9550 */
t4_read_cim_obq(struct adapter * adap,unsigned int qid,u32 * data,size_t n)9551 int t4_read_cim_obq(struct adapter *adap, unsigned int qid, u32 *data, size_t n)
9552 {
9553 int i, err;
9554 unsigned int addr, v, nwords;
9555 int cim_num_obq = is_t4(adap->params.chip) ?
9556 CIM_NUM_OBQ : CIM_NUM_OBQ_T5;
9557
9558 if ((qid > (cim_num_obq - 1)) || (n & 3))
9559 return -EINVAL;
9560
9561 t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, OBQSELECT_F |
9562 QUENUMSELECT_V(qid));
9563 v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A);
9564
9565 addr = CIMQBASE_G(v) * 64; /* muliple of 256 -> muliple of 4 */
9566 nwords = CIMQSIZE_G(v) * 64; /* same */
9567 if (n > nwords)
9568 n = nwords;
9569
9570 for (i = 0; i < n; i++, addr++) {
9571 t4_write_reg(adap, CIM_OBQ_DBG_CFG_A, OBQDBGADDR_V(addr) |
9572 OBQDBGEN_F);
9573 err = t4_wait_op_done(adap, CIM_OBQ_DBG_CFG_A, OBQDBGBUSY_F, 0,
9574 2, 1);
9575 if (err)
9576 return err;
9577 *data++ = t4_read_reg(adap, CIM_OBQ_DBG_DATA_A);
9578 }
9579 t4_write_reg(adap, CIM_OBQ_DBG_CFG_A, 0);
9580 return i;
9581 }
9582
9583 /**
9584 * t4_cim_read - read a block from CIM internal address space
9585 * @adap: the adapter
9586 * @addr: the start address within the CIM address space
9587 * @n: number of words to read
9588 * @valp: where to store the result
9589 *
9590 * Reads a block of 4-byte words from the CIM intenal address space.
9591 */
t4_cim_read(struct adapter * adap,unsigned int addr,unsigned int n,unsigned int * valp)9592 int t4_cim_read(struct adapter *adap, unsigned int addr, unsigned int n,
9593 unsigned int *valp)
9594 {
9595 int ret = 0;
9596
9597 if (t4_read_reg(adap, CIM_HOST_ACC_CTRL_A) & HOSTBUSY_F)
9598 return -EBUSY;
9599
9600 for ( ; !ret && n--; addr += 4) {
9601 t4_write_reg(adap, CIM_HOST_ACC_CTRL_A, addr);
9602 ret = t4_wait_op_done(adap, CIM_HOST_ACC_CTRL_A, HOSTBUSY_F,
9603 0, 5, 2);
9604 if (!ret)
9605 *valp++ = t4_read_reg(adap, CIM_HOST_ACC_DATA_A);
9606 }
9607 return ret;
9608 }
9609
9610 /**
9611 * t4_cim_write - write a block into CIM internal address space
9612 * @adap: the adapter
9613 * @addr: the start address within the CIM address space
9614 * @n: number of words to write
9615 * @valp: set of values to write
9616 *
9617 * Writes a block of 4-byte words into the CIM intenal address space.
9618 */
t4_cim_write(struct adapter * adap,unsigned int addr,unsigned int n,const unsigned int * valp)9619 int t4_cim_write(struct adapter *adap, unsigned int addr, unsigned int n,
9620 const unsigned int *valp)
9621 {
9622 int ret = 0;
9623
9624 if (t4_read_reg(adap, CIM_HOST_ACC_CTRL_A) & HOSTBUSY_F)
9625 return -EBUSY;
9626
9627 for ( ; !ret && n--; addr += 4) {
9628 t4_write_reg(adap, CIM_HOST_ACC_DATA_A, *valp++);
9629 t4_write_reg(adap, CIM_HOST_ACC_CTRL_A, addr | HOSTWRITE_F);
9630 ret = t4_wait_op_done(adap, CIM_HOST_ACC_CTRL_A, HOSTBUSY_F,
9631 0, 5, 2);
9632 }
9633 return ret;
9634 }
9635
t4_cim_write1(struct adapter * adap,unsigned int addr,unsigned int val)9636 static int t4_cim_write1(struct adapter *adap, unsigned int addr,
9637 unsigned int val)
9638 {
9639 return t4_cim_write(adap, addr, 1, &val);
9640 }
9641
9642 /**
9643 * t4_cim_read_la - read CIM LA capture buffer
9644 * @adap: the adapter
9645 * @la_buf: where to store the LA data
9646 * @wrptr: the HW write pointer within the capture buffer
9647 *
9648 * Reads the contents of the CIM LA buffer with the most recent entry at
9649 * the end of the returned data and with the entry at @wrptr first.
9650 * We try to leave the LA in the running state we find it in.
9651 */
t4_cim_read_la(struct adapter * adap,u32 * la_buf,unsigned int * wrptr)9652 int t4_cim_read_la(struct adapter *adap, u32 *la_buf, unsigned int *wrptr)
9653 {
9654 int i, ret;
9655 unsigned int cfg, val, idx;
9656
9657 ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &cfg);
9658 if (ret)
9659 return ret;
9660
9661 if (cfg & UPDBGLAEN_F) { /* LA is running, freeze it */
9662 ret = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A, 0);
9663 if (ret)
9664 return ret;
9665 }
9666
9667 ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &val);
9668 if (ret)
9669 goto restart;
9670
9671 idx = UPDBGLAWRPTR_G(val);
9672 if (wrptr)
9673 *wrptr = idx;
9674
9675 for (i = 0; i < adap->params.cim_la_size; i++) {
9676 ret = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A,
9677 UPDBGLARDPTR_V(idx) | UPDBGLARDEN_F);
9678 if (ret)
9679 break;
9680 ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &val);
9681 if (ret)
9682 break;
9683 if (val & UPDBGLARDEN_F) {
9684 ret = -ETIMEDOUT;
9685 break;
9686 }
9687 ret = t4_cim_read(adap, UP_UP_DBG_LA_DATA_A, 1, &la_buf[i]);
9688 if (ret)
9689 break;
9690
9691 /* Bits 0-3 of UpDbgLaRdPtr can be between 0000 to 1001 to
9692 * identify the 32-bit portion of the full 312-bit data
9693 */
9694 if (is_t6(adap->params.chip) && (idx & 0xf) >= 9)
9695 idx = (idx & 0xff0) + 0x10;
9696 else
9697 idx++;
9698 /* address can't exceed 0xfff */
9699 idx &= UPDBGLARDPTR_M;
9700 }
9701 restart:
9702 if (cfg & UPDBGLAEN_F) {
9703 int r = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A,
9704 cfg & ~UPDBGLARDEN_F);
9705 if (!ret)
9706 ret = r;
9707 }
9708 return ret;
9709 }
9710
9711 /**
9712 * t4_tp_read_la - read TP LA capture buffer
9713 * @adap: the adapter
9714 * @la_buf: where to store the LA data
9715 * @wrptr: the HW write pointer within the capture buffer
9716 *
9717 * Reads the contents of the TP LA buffer with the most recent entry at
9718 * the end of the returned data and with the entry at @wrptr first.
9719 * We leave the LA in the running state we find it in.
9720 */
t4_tp_read_la(struct adapter * adap,u64 * la_buf,unsigned int * wrptr)9721 void t4_tp_read_la(struct adapter *adap, u64 *la_buf, unsigned int *wrptr)
9722 {
9723 bool last_incomplete;
9724 unsigned int i, cfg, val, idx;
9725
9726 cfg = t4_read_reg(adap, TP_DBG_LA_CONFIG_A) & 0xffff;
9727 if (cfg & DBGLAENABLE_F) /* freeze LA */
9728 t4_write_reg(adap, TP_DBG_LA_CONFIG_A,
9729 adap->params.tp.la_mask | (cfg ^ DBGLAENABLE_F));
9730
9731 val = t4_read_reg(adap, TP_DBG_LA_CONFIG_A);
9732 idx = DBGLAWPTR_G(val);
9733 last_incomplete = DBGLAMODE_G(val) >= 2 && (val & DBGLAWHLF_F) == 0;
9734 if (last_incomplete)
9735 idx = (idx + 1) & DBGLARPTR_M;
9736 if (wrptr)
9737 *wrptr = idx;
9738
9739 val &= 0xffff;
9740 val &= ~DBGLARPTR_V(DBGLARPTR_M);
9741 val |= adap->params.tp.la_mask;
9742
9743 for (i = 0; i < TPLA_SIZE; i++) {
9744 t4_write_reg(adap, TP_DBG_LA_CONFIG_A, DBGLARPTR_V(idx) | val);
9745 la_buf[i] = t4_read_reg64(adap, TP_DBG_LA_DATAL_A);
9746 idx = (idx + 1) & DBGLARPTR_M;
9747 }
9748
9749 /* Wipe out last entry if it isn't valid */
9750 if (last_incomplete)
9751 la_buf[TPLA_SIZE - 1] = ~0ULL;
9752
9753 if (cfg & DBGLAENABLE_F) /* restore running state */
9754 t4_write_reg(adap, TP_DBG_LA_CONFIG_A,
9755 cfg | adap->params.tp.la_mask);
9756 }
9757
9758 /* SGE Hung Ingress DMA Warning Threshold time and Warning Repeat Rate (in
9759 * seconds). If we find one of the SGE Ingress DMA State Machines in the same
9760 * state for more than the Warning Threshold then we'll issue a warning about
9761 * a potential hang. We'll repeat the warning as the SGE Ingress DMA Channel
9762 * appears to be hung every Warning Repeat second till the situation clears.
9763 * If the situation clears, we'll note that as well.
9764 */
9765 #define SGE_IDMA_WARN_THRESH 1
9766 #define SGE_IDMA_WARN_REPEAT 300
9767
9768 /**
9769 * t4_idma_monitor_init - initialize SGE Ingress DMA Monitor
9770 * @adapter: the adapter
9771 * @idma: the adapter IDMA Monitor state
9772 *
9773 * Initialize the state of an SGE Ingress DMA Monitor.
9774 */
t4_idma_monitor_init(struct adapter * adapter,struct sge_idma_monitor_state * idma)9775 void t4_idma_monitor_init(struct adapter *adapter,
9776 struct sge_idma_monitor_state *idma)
9777 {
9778 /* Initialize the state variables for detecting an SGE Ingress DMA
9779 * hang. The SGE has internal counters which count up on each clock
9780 * tick whenever the SGE finds its Ingress DMA State Engines in the
9781 * same state they were on the previous clock tick. The clock used is
9782 * the Core Clock so we have a limit on the maximum "time" they can
9783 * record; typically a very small number of seconds. For instance,
9784 * with a 600MHz Core Clock, we can only count up to a bit more than
9785 * 7s. So we'll synthesize a larger counter in order to not run the
9786 * risk of having the "timers" overflow and give us the flexibility to
9787 * maintain a Hung SGE State Machine of our own which operates across
9788 * a longer time frame.
9789 */
9790 idma->idma_1s_thresh = core_ticks_per_usec(adapter) * 1000000; /* 1s */
9791 idma->idma_stalled[0] = 0;
9792 idma->idma_stalled[1] = 0;
9793 }
9794
9795 /**
9796 * t4_idma_monitor - monitor SGE Ingress DMA state
9797 * @adapter: the adapter
9798 * @idma: the adapter IDMA Monitor state
9799 * @hz: number of ticks/second
9800 * @ticks: number of ticks since the last IDMA Monitor call
9801 */
t4_idma_monitor(struct adapter * adapter,struct sge_idma_monitor_state * idma,int hz,int ticks)9802 void t4_idma_monitor(struct adapter *adapter,
9803 struct sge_idma_monitor_state *idma,
9804 int hz, int ticks)
9805 {
9806 int i, idma_same_state_cnt[2];
9807
9808 /* Read the SGE Debug Ingress DMA Same State Count registers. These
9809 * are counters inside the SGE which count up on each clock when the
9810 * SGE finds its Ingress DMA State Engines in the same states they
9811 * were in the previous clock. The counters will peg out at
9812 * 0xffffffff without wrapping around so once they pass the 1s
9813 * threshold they'll stay above that till the IDMA state changes.
9814 */
9815 t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 13);
9816 idma_same_state_cnt[0] = t4_read_reg(adapter, SGE_DEBUG_DATA_HIGH_A);
9817 idma_same_state_cnt[1] = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A);
9818
9819 for (i = 0; i < 2; i++) {
9820 u32 debug0, debug11;
9821
9822 /* If the Ingress DMA Same State Counter ("timer") is less
9823 * than 1s, then we can reset our synthesized Stall Timer and
9824 * continue. If we have previously emitted warnings about a
9825 * potential stalled Ingress Queue, issue a note indicating
9826 * that the Ingress Queue has resumed forward progress.
9827 */
9828 if (idma_same_state_cnt[i] < idma->idma_1s_thresh) {
9829 if (idma->idma_stalled[i] >= SGE_IDMA_WARN_THRESH * hz)
9830 dev_warn(adapter->pdev_dev, "SGE idma%d, queue %u, "
9831 "resumed after %d seconds\n",
9832 i, idma->idma_qid[i],
9833 idma->idma_stalled[i] / hz);
9834 idma->idma_stalled[i] = 0;
9835 continue;
9836 }
9837
9838 /* Synthesize an SGE Ingress DMA Same State Timer in the Hz
9839 * domain. The first time we get here it'll be because we
9840 * passed the 1s Threshold; each additional time it'll be
9841 * because the RX Timer Callback is being fired on its regular
9842 * schedule.
9843 *
9844 * If the stall is below our Potential Hung Ingress Queue
9845 * Warning Threshold, continue.
9846 */
9847 if (idma->idma_stalled[i] == 0) {
9848 idma->idma_stalled[i] = hz;
9849 idma->idma_warn[i] = 0;
9850 } else {
9851 idma->idma_stalled[i] += ticks;
9852 idma->idma_warn[i] -= ticks;
9853 }
9854
9855 if (idma->idma_stalled[i] < SGE_IDMA_WARN_THRESH * hz)
9856 continue;
9857
9858 /* We'll issue a warning every SGE_IDMA_WARN_REPEAT seconds.
9859 */
9860 if (idma->idma_warn[i] > 0)
9861 continue;
9862 idma->idma_warn[i] = SGE_IDMA_WARN_REPEAT * hz;
9863
9864 /* Read and save the SGE IDMA State and Queue ID information.
9865 * We do this every time in case it changes across time ...
9866 * can't be too careful ...
9867 */
9868 t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 0);
9869 debug0 = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A);
9870 idma->idma_state[i] = (debug0 >> (i * 9)) & 0x3f;
9871
9872 t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 11);
9873 debug11 = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A);
9874 idma->idma_qid[i] = (debug11 >> (i * 16)) & 0xffff;
9875
9876 dev_warn(adapter->pdev_dev, "SGE idma%u, queue %u, potentially stuck in "
9877 "state %u for %d seconds (debug0=%#x, debug11=%#x)\n",
9878 i, idma->idma_qid[i], idma->idma_state[i],
9879 idma->idma_stalled[i] / hz,
9880 debug0, debug11);
9881 t4_sge_decode_idma_state(adapter, idma->idma_state[i]);
9882 }
9883 }
9884
9885 /**
9886 * t4_load_cfg - download config file
9887 * @adap: the adapter
9888 * @cfg_data: the cfg text file to write
9889 * @size: text file size
9890 *
9891 * Write the supplied config text file to the card's serial flash.
9892 */
t4_load_cfg(struct adapter * adap,const u8 * cfg_data,unsigned int size)9893 int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
9894 {
9895 int ret, i, n, cfg_addr;
9896 unsigned int addr;
9897 unsigned int flash_cfg_start_sec;
9898 unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
9899
9900 cfg_addr = t4_flash_cfg_addr(adap);
9901 if (cfg_addr < 0)
9902 return cfg_addr;
9903
9904 addr = cfg_addr;
9905 flash_cfg_start_sec = addr / SF_SEC_SIZE;
9906
9907 if (size > FLASH_CFG_MAX_SIZE) {
9908 dev_err(adap->pdev_dev, "cfg file too large, max is %u bytes\n",
9909 FLASH_CFG_MAX_SIZE);
9910 return -EFBIG;
9911 }
9912
9913 i = DIV_ROUND_UP(FLASH_CFG_MAX_SIZE, /* # of sectors spanned */
9914 sf_sec_size);
9915 ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec,
9916 flash_cfg_start_sec + i - 1);
9917 /* If size == 0 then we're simply erasing the FLASH sectors associated
9918 * with the on-adapter Firmware Configuration File.
9919 */
9920 if (ret || size == 0)
9921 goto out;
9922
9923 /* this will write to the flash up to SF_PAGE_SIZE at a time */
9924 for (i = 0; i < size; i += SF_PAGE_SIZE) {
9925 if ((size - i) < SF_PAGE_SIZE)
9926 n = size - i;
9927 else
9928 n = SF_PAGE_SIZE;
9929 ret = t4_write_flash(adap, addr, n, cfg_data);
9930 if (ret)
9931 goto out;
9932
9933 addr += SF_PAGE_SIZE;
9934 cfg_data += SF_PAGE_SIZE;
9935 }
9936
9937 out:
9938 if (ret)
9939 dev_err(adap->pdev_dev, "config file %s failed %d\n",
9940 (size == 0 ? "clear" : "download"), ret);
9941 return ret;
9942 }
9943
9944 /**
9945 * t4_set_vf_mac - Set MAC address for the specified VF
9946 * @adapter: The adapter
9947 * @vf: one of the VFs instantiated by the specified PF
9948 * @naddr: the number of MAC addresses
9949 * @addr: the MAC address(es) to be set to the specified VF
9950 */
t4_set_vf_mac_acl(struct adapter * adapter,unsigned int vf,unsigned int naddr,u8 * addr)9951 int t4_set_vf_mac_acl(struct adapter *adapter, unsigned int vf,
9952 unsigned int naddr, u8 *addr)
9953 {
9954 struct fw_acl_mac_cmd cmd;
9955
9956 memset(&cmd, 0, sizeof(cmd));
9957 cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_ACL_MAC_CMD) |
9958 FW_CMD_REQUEST_F |
9959 FW_CMD_WRITE_F |
9960 FW_ACL_MAC_CMD_PFN_V(adapter->pf) |
9961 FW_ACL_MAC_CMD_VFN_V(vf));
9962
9963 /* Note: Do not enable the ACL */
9964 cmd.en_to_len16 = cpu_to_be32((unsigned int)FW_LEN16(cmd));
9965 cmd.nmac = naddr;
9966
9967 switch (adapter->pf) {
9968 case 3:
9969 memcpy(cmd.macaddr3, addr, sizeof(cmd.macaddr3));
9970 break;
9971 case 2:
9972 memcpy(cmd.macaddr2, addr, sizeof(cmd.macaddr2));
9973 break;
9974 case 1:
9975 memcpy(cmd.macaddr1, addr, sizeof(cmd.macaddr1));
9976 break;
9977 case 0:
9978 memcpy(cmd.macaddr0, addr, sizeof(cmd.macaddr0));
9979 break;
9980 }
9981
9982 return t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &cmd);
9983 }
9984
9985 /**
9986 * t4_read_pace_tbl - read the pace table
9987 * @adap: the adapter
9988 * @pace_vals: holds the returned values
9989 *
9990 * Returns the values of TP's pace table in microseconds.
9991 */
t4_read_pace_tbl(struct adapter * adap,unsigned int pace_vals[NTX_SCHED])9992 void t4_read_pace_tbl(struct adapter *adap, unsigned int pace_vals[NTX_SCHED])
9993 {
9994 unsigned int i, v;
9995
9996 for (i = 0; i < NTX_SCHED; i++) {
9997 t4_write_reg(adap, TP_PACE_TABLE_A, 0xffff0000 + i);
9998 v = t4_read_reg(adap, TP_PACE_TABLE_A);
9999 pace_vals[i] = dack_ticks_to_usec(adap, v);
10000 }
10001 }
10002
10003 /**
10004 * t4_get_tx_sched - get the configuration of a Tx HW traffic scheduler
10005 * @adap: the adapter
10006 * @sched: the scheduler index
10007 * @kbps: the byte rate in Kbps
10008 * @ipg: the interpacket delay in tenths of nanoseconds
10009 * @sleep_ok: if true we may sleep while awaiting command completion
10010 *
10011 * Return the current configuration of a HW Tx scheduler.
10012 */
t4_get_tx_sched(struct adapter * adap,unsigned int sched,unsigned int * kbps,unsigned int * ipg,bool sleep_ok)10013 void t4_get_tx_sched(struct adapter *adap, unsigned int sched,
10014 unsigned int *kbps, unsigned int *ipg, bool sleep_ok)
10015 {
10016 unsigned int v, addr, bpt, cpt;
10017
10018 if (kbps) {
10019 addr = TP_TX_MOD_Q1_Q0_RATE_LIMIT_A - sched / 2;
10020 t4_tp_tm_pio_read(adap, &v, 1, addr, sleep_ok);
10021 if (sched & 1)
10022 v >>= 16;
10023 bpt = (v >> 8) & 0xff;
10024 cpt = v & 0xff;
10025 if (!cpt) {
10026 *kbps = 0; /* scheduler disabled */
10027 } else {
10028 v = (adap->params.vpd.cclk * 1000) / cpt; /* ticks/s */
10029 *kbps = (v * bpt) / 125;
10030 }
10031 }
10032 if (ipg) {
10033 addr = TP_TX_MOD_Q1_Q0_TIMER_SEPARATOR_A - sched / 2;
10034 t4_tp_tm_pio_read(adap, &v, 1, addr, sleep_ok);
10035 if (sched & 1)
10036 v >>= 16;
10037 v &= 0xffff;
10038 *ipg = (10000 * v) / core_ticks_per_usec(adap);
10039 }
10040 }
10041
10042 /* t4_sge_ctxt_rd - read an SGE context through FW
10043 * @adap: the adapter
10044 * @mbox: mailbox to use for the FW command
10045 * @cid: the context id
10046 * @ctype: the context type
10047 * @data: where to store the context data
10048 *
10049 * Issues a FW command through the given mailbox to read an SGE context.
10050 */
t4_sge_ctxt_rd(struct adapter * adap,unsigned int mbox,unsigned int cid,enum ctxt_type ctype,u32 * data)10051 int t4_sge_ctxt_rd(struct adapter *adap, unsigned int mbox, unsigned int cid,
10052 enum ctxt_type ctype, u32 *data)
10053 {
10054 struct fw_ldst_cmd c;
10055 int ret;
10056
10057 if (ctype == CTXT_FLM)
10058 ret = FW_LDST_ADDRSPC_SGE_FLMC;
10059 else
10060 ret = FW_LDST_ADDRSPC_SGE_CONMC;
10061
10062 memset(&c, 0, sizeof(c));
10063 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
10064 FW_CMD_REQUEST_F | FW_CMD_READ_F |
10065 FW_LDST_CMD_ADDRSPACE_V(ret));
10066 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
10067 c.u.idctxt.physid = cpu_to_be32(cid);
10068
10069 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
10070 if (ret == 0) {
10071 data[0] = be32_to_cpu(c.u.idctxt.ctxt_data0);
10072 data[1] = be32_to_cpu(c.u.idctxt.ctxt_data1);
10073 data[2] = be32_to_cpu(c.u.idctxt.ctxt_data2);
10074 data[3] = be32_to_cpu(c.u.idctxt.ctxt_data3);
10075 data[4] = be32_to_cpu(c.u.idctxt.ctxt_data4);
10076 data[5] = be32_to_cpu(c.u.idctxt.ctxt_data5);
10077 }
10078 return ret;
10079 }
10080
10081 /**
10082 * t4_sge_ctxt_rd_bd - read an SGE context bypassing FW
10083 * @adap: the adapter
10084 * @cid: the context id
10085 * @ctype: the context type
10086 * @data: where to store the context data
10087 *
10088 * Reads an SGE context directly, bypassing FW. This is only for
10089 * debugging when FW is unavailable.
10090 */
t4_sge_ctxt_rd_bd(struct adapter * adap,unsigned int cid,enum ctxt_type ctype,u32 * data)10091 int t4_sge_ctxt_rd_bd(struct adapter *adap, unsigned int cid,
10092 enum ctxt_type ctype, u32 *data)
10093 {
10094 int i, ret;
10095
10096 t4_write_reg(adap, SGE_CTXT_CMD_A, CTXTQID_V(cid) | CTXTTYPE_V(ctype));
10097 ret = t4_wait_op_done(adap, SGE_CTXT_CMD_A, BUSY_F, 0, 3, 1);
10098 if (!ret)
10099 for (i = SGE_CTXT_DATA0_A; i <= SGE_CTXT_DATA5_A; i += 4)
10100 *data++ = t4_read_reg(adap, i);
10101 return ret;
10102 }
10103
t4_sched_params(struct adapter * adapter,int type,int level,int mode,int rateunit,int ratemode,int channel,int class,int minrate,int maxrate,int weight,int pktsize)10104 int t4_sched_params(struct adapter *adapter, int type, int level, int mode,
10105 int rateunit, int ratemode, int channel, int class,
10106 int minrate, int maxrate, int weight, int pktsize)
10107 {
10108 struct fw_sched_cmd cmd;
10109
10110 memset(&cmd, 0, sizeof(cmd));
10111 cmd.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_SCHED_CMD) |
10112 FW_CMD_REQUEST_F |
10113 FW_CMD_WRITE_F);
10114 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
10115
10116 cmd.u.params.sc = FW_SCHED_SC_PARAMS;
10117 cmd.u.params.type = type;
10118 cmd.u.params.level = level;
10119 cmd.u.params.mode = mode;
10120 cmd.u.params.ch = channel;
10121 cmd.u.params.cl = class;
10122 cmd.u.params.unit = rateunit;
10123 cmd.u.params.rate = ratemode;
10124 cmd.u.params.min = cpu_to_be32(minrate);
10125 cmd.u.params.max = cpu_to_be32(maxrate);
10126 cmd.u.params.weight = cpu_to_be16(weight);
10127 cmd.u.params.pktsize = cpu_to_be16(pktsize);
10128
10129 return t4_wr_mbox_meat(adapter, adapter->mbox, &cmd, sizeof(cmd),
10130 NULL, 1);
10131 }
10132
10133 /**
10134 * t4_i2c_rd - read I2C data from adapter
10135 * @adap: the adapter
10136 * @port: Port number if per-port device; <0 if not
10137 * @devid: per-port device ID or absolute device ID
10138 * @offset: byte offset into device I2C space
10139 * @len: byte length of I2C space data
10140 * @buf: buffer in which to return I2C data
10141 *
10142 * Reads the I2C data from the indicated device and location.
10143 */
t4_i2c_rd(struct adapter * adap,unsigned int mbox,int port,unsigned int devid,unsigned int offset,unsigned int len,u8 * buf)10144 int t4_i2c_rd(struct adapter *adap, unsigned int mbox, int port,
10145 unsigned int devid, unsigned int offset,
10146 unsigned int len, u8 *buf)
10147 {
10148 struct fw_ldst_cmd ldst_cmd, ldst_rpl;
10149 unsigned int i2c_max = sizeof(ldst_cmd.u.i2c.data);
10150 int ret = 0;
10151
10152 if (len > I2C_PAGE_SIZE)
10153 return -EINVAL;
10154
10155 /* Dont allow reads that spans multiple pages */
10156 if (offset < I2C_PAGE_SIZE && offset + len > I2C_PAGE_SIZE)
10157 return -EINVAL;
10158
10159 memset(&ldst_cmd, 0, sizeof(ldst_cmd));
10160 ldst_cmd.op_to_addrspace =
10161 cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
10162 FW_CMD_REQUEST_F |
10163 FW_CMD_READ_F |
10164 FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_I2C));
10165 ldst_cmd.cycles_to_len16 = cpu_to_be32(FW_LEN16(ldst_cmd));
10166 ldst_cmd.u.i2c.pid = (port < 0 ? 0xff : port);
10167 ldst_cmd.u.i2c.did = devid;
10168
10169 while (len > 0) {
10170 unsigned int i2c_len = (len < i2c_max) ? len : i2c_max;
10171
10172 ldst_cmd.u.i2c.boffset = offset;
10173 ldst_cmd.u.i2c.blen = i2c_len;
10174
10175 ret = t4_wr_mbox(adap, mbox, &ldst_cmd, sizeof(ldst_cmd),
10176 &ldst_rpl);
10177 if (ret)
10178 break;
10179
10180 memcpy(buf, ldst_rpl.u.i2c.data, i2c_len);
10181 offset += i2c_len;
10182 buf += i2c_len;
10183 len -= i2c_len;
10184 }
10185
10186 return ret;
10187 }
10188
10189 /**
10190 * t4_set_vlan_acl - Set a VLAN id for the specified VF
10191 * @adapter: the adapter
10192 * @mbox: mailbox to use for the FW command
10193 * @vf: one of the VFs instantiated by the specified PF
10194 * @vlan: The vlanid to be set
10195 */
t4_set_vlan_acl(struct adapter * adap,unsigned int mbox,unsigned int vf,u16 vlan)10196 int t4_set_vlan_acl(struct adapter *adap, unsigned int mbox, unsigned int vf,
10197 u16 vlan)
10198 {
10199 struct fw_acl_vlan_cmd vlan_cmd;
10200 unsigned int enable;
10201
10202 enable = (vlan ? FW_ACL_VLAN_CMD_EN_F : 0);
10203 memset(&vlan_cmd, 0, sizeof(vlan_cmd));
10204 vlan_cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_ACL_VLAN_CMD) |
10205 FW_CMD_REQUEST_F |
10206 FW_CMD_WRITE_F |
10207 FW_CMD_EXEC_F |
10208 FW_ACL_VLAN_CMD_PFN_V(adap->pf) |
10209 FW_ACL_VLAN_CMD_VFN_V(vf));
10210 vlan_cmd.en_to_len16 = cpu_to_be32(enable | FW_LEN16(vlan_cmd));
10211 /* Drop all packets that donot match vlan id */
10212 vlan_cmd.dropnovlan_fm = FW_ACL_VLAN_CMD_FM_F;
10213 if (enable != 0) {
10214 vlan_cmd.nvlan = 1;
10215 vlan_cmd.vlanid[0] = cpu_to_be16(vlan);
10216 }
10217
10218 return t4_wr_mbox(adap, adap->mbox, &vlan_cmd, sizeof(vlan_cmd), NULL);
10219 }
10220
