1 /*
2 * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
3 * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
4
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public
7 * License as published by the Free Software Foundation;
8 * either version 2, or (at your option) any later version.
9
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
12 * the implied warranty of MERCHANTABILITY or FITNESS FOR
13 * A PARTICULAR PURPOSE.See the GNU General Public License
14 * for more details.
15
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc.,
19 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
20 */
21 #include <linux/via-core.h>
22 #include "global.h"
23
24 /*
25 * Figure out an appropriate bytes-per-pixel setting.
26 */
viafb_set_bpp(void __iomem * engine,u8 bpp)27 static int viafb_set_bpp(void __iomem *engine, u8 bpp)
28 {
29 u32 gemode;
30
31 /* Preserve the reserved bits */
32 /* Lowest 2 bits to zero gives us no rotation */
33 gemode = readl(engine + VIA_REG_GEMODE) & 0xfffffcfc;
34 switch (bpp) {
35 case 8:
36 gemode |= VIA_GEM_8bpp;
37 break;
38 case 16:
39 gemode |= VIA_GEM_16bpp;
40 break;
41 case 32:
42 gemode |= VIA_GEM_32bpp;
43 break;
44 default:
45 printk(KERN_WARNING "viafb_set_bpp: Unsupported bpp %d\n", bpp);
46 return -EINVAL;
47 }
48 writel(gemode, engine + VIA_REG_GEMODE);
49 return 0;
50 }
51
52
hw_bitblt_1(void __iomem * engine,u8 op,u32 width,u32 height,u8 dst_bpp,u32 dst_addr,u32 dst_pitch,u32 dst_x,u32 dst_y,u32 * src_mem,u32 src_addr,u32 src_pitch,u32 src_x,u32 src_y,u32 fg_color,u32 bg_color,u8 fill_rop)53 static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height,
54 u8 dst_bpp, u32 dst_addr, u32 dst_pitch, u32 dst_x, u32 dst_y,
55 u32 *src_mem, u32 src_addr, u32 src_pitch, u32 src_x, u32 src_y,
56 u32 fg_color, u32 bg_color, u8 fill_rop)
57 {
58 u32 ge_cmd = 0, tmp, i;
59 int ret;
60
61 if (!op || op > 3) {
62 printk(KERN_WARNING "hw_bitblt_1: Invalid operation: %d\n", op);
63 return -EINVAL;
64 }
65
66 if (op != VIA_BITBLT_FILL && !src_mem && src_addr == dst_addr) {
67 if (src_x < dst_x) {
68 ge_cmd |= 0x00008000;
69 src_x += width - 1;
70 dst_x += width - 1;
71 }
72 if (src_y < dst_y) {
73 ge_cmd |= 0x00004000;
74 src_y += height - 1;
75 dst_y += height - 1;
76 }
77 }
78
79 if (op == VIA_BITBLT_FILL) {
80 switch (fill_rop) {
81 case 0x00: /* blackness */
82 case 0x5A: /* pattern inversion */
83 case 0xF0: /* pattern copy */
84 case 0xFF: /* whiteness */
85 break;
86 default:
87 printk(KERN_WARNING "hw_bitblt_1: Invalid fill rop: "
88 "%u\n", fill_rop);
89 return -EINVAL;
90 }
91 }
92
93 ret = viafb_set_bpp(engine, dst_bpp);
94 if (ret)
95 return ret;
96
97 if (op != VIA_BITBLT_FILL) {
98 if (src_x & (op == VIA_BITBLT_MONO ? 0xFFFF8000 : 0xFFFFF000)
99 || src_y & 0xFFFFF000) {
100 printk(KERN_WARNING "hw_bitblt_1: Unsupported source "
101 "x/y %d %d\n", src_x, src_y);
102 return -EINVAL;
103 }
104 tmp = src_x | (src_y << 16);
105 writel(tmp, engine + 0x08);
106 }
107
108 if (dst_x & 0xFFFFF000 || dst_y & 0xFFFFF000) {
109 printk(KERN_WARNING "hw_bitblt_1: Unsupported destination x/y "
110 "%d %d\n", dst_x, dst_y);
111 return -EINVAL;
112 }
113 tmp = dst_x | (dst_y << 16);
114 writel(tmp, engine + 0x0C);
115
116 if ((width - 1) & 0xFFFFF000 || (height - 1) & 0xFFFFF000) {
117 printk(KERN_WARNING "hw_bitblt_1: Unsupported width/height "
118 "%d %d\n", width, height);
119 return -EINVAL;
120 }
121 tmp = (width - 1) | ((height - 1) << 16);
122 writel(tmp, engine + 0x10);
123
124 if (op != VIA_BITBLT_COLOR)
125 writel(fg_color, engine + 0x18);
126
127 if (op == VIA_BITBLT_MONO)
128 writel(bg_color, engine + 0x1C);
129
130 if (op != VIA_BITBLT_FILL) {
131 tmp = src_mem ? 0 : src_addr;
132 if (dst_addr & 0xE0000007) {
133 printk(KERN_WARNING "hw_bitblt_1: Unsupported source "
134 "address %X\n", tmp);
135 return -EINVAL;
136 }
137 tmp >>= 3;
138 writel(tmp, engine + 0x30);
139 }
140
141 if (dst_addr & 0xE0000007) {
142 printk(KERN_WARNING "hw_bitblt_1: Unsupported destination "
143 "address %X\n", dst_addr);
144 return -EINVAL;
145 }
146 tmp = dst_addr >> 3;
147 writel(tmp, engine + 0x34);
148
149 if (op == VIA_BITBLT_FILL)
150 tmp = 0;
151 else
152 tmp = src_pitch;
153 if (tmp & 0xFFFFC007 || dst_pitch & 0xFFFFC007) {
154 printk(KERN_WARNING "hw_bitblt_1: Unsupported pitch %X %X\n",
155 tmp, dst_pitch);
156 return -EINVAL;
157 }
158 tmp = VIA_PITCH_ENABLE | (tmp >> 3) | (dst_pitch << (16 - 3));
159 writel(tmp, engine + 0x38);
160
161 if (op == VIA_BITBLT_FILL)
162 ge_cmd |= fill_rop << 24 | 0x00002000 | 0x00000001;
163 else {
164 ge_cmd |= 0xCC000000; /* ROP=SRCCOPY */
165 if (src_mem)
166 ge_cmd |= 0x00000040;
167 if (op == VIA_BITBLT_MONO)
168 ge_cmd |= 0x00000002 | 0x00000100 | 0x00020000;
169 else
170 ge_cmd |= 0x00000001;
171 }
172 writel(ge_cmd, engine);
173
174 if (op == VIA_BITBLT_FILL || !src_mem)
175 return 0;
176
177 tmp = (width * height * (op == VIA_BITBLT_MONO ? 1 : (dst_bpp >> 3)) +
178 3) >> 2;
179
180 for (i = 0; i < tmp; i++)
181 writel(src_mem[i], engine + VIA_MMIO_BLTBASE);
182
183 return 0;
184 }
185
hw_bitblt_2(void __iomem * engine,u8 op,u32 width,u32 height,u8 dst_bpp,u32 dst_addr,u32 dst_pitch,u32 dst_x,u32 dst_y,u32 * src_mem,u32 src_addr,u32 src_pitch,u32 src_x,u32 src_y,u32 fg_color,u32 bg_color,u8 fill_rop)186 static int hw_bitblt_2(void __iomem *engine, u8 op, u32 width, u32 height,
187 u8 dst_bpp, u32 dst_addr, u32 dst_pitch, u32 dst_x, u32 dst_y,
188 u32 *src_mem, u32 src_addr, u32 src_pitch, u32 src_x, u32 src_y,
189 u32 fg_color, u32 bg_color, u8 fill_rop)
190 {
191 u32 ge_cmd = 0, tmp, i;
192 int ret;
193
194 if (!op || op > 3) {
195 printk(KERN_WARNING "hw_bitblt_2: Invalid operation: %d\n", op);
196 return -EINVAL;
197 }
198
199 if (op != VIA_BITBLT_FILL && !src_mem && src_addr == dst_addr) {
200 if (src_x < dst_x) {
201 ge_cmd |= 0x00008000;
202 src_x += width - 1;
203 dst_x += width - 1;
204 }
205 if (src_y < dst_y) {
206 ge_cmd |= 0x00004000;
207 src_y += height - 1;
208 dst_y += height - 1;
209 }
210 }
211
212 if (op == VIA_BITBLT_FILL) {
213 switch (fill_rop) {
214 case 0x00: /* blackness */
215 case 0x5A: /* pattern inversion */
216 case 0xF0: /* pattern copy */
217 case 0xFF: /* whiteness */
218 break;
219 default:
220 printk(KERN_WARNING "hw_bitblt_2: Invalid fill rop: "
221 "%u\n", fill_rop);
222 return -EINVAL;
223 }
224 }
225
226 ret = viafb_set_bpp(engine, dst_bpp);
227 if (ret)
228 return ret;
229
230 if (op == VIA_BITBLT_FILL)
231 tmp = 0;
232 else
233 tmp = src_pitch;
234 if (tmp & 0xFFFFC007 || dst_pitch & 0xFFFFC007) {
235 printk(KERN_WARNING "hw_bitblt_2: Unsupported pitch %X %X\n",
236 tmp, dst_pitch);
237 return -EINVAL;
238 }
239 tmp = (tmp >> 3) | (dst_pitch << (16 - 3));
240 writel(tmp, engine + 0x08);
241
242 if ((width - 1) & 0xFFFFF000 || (height - 1) & 0xFFFFF000) {
243 printk(KERN_WARNING "hw_bitblt_2: Unsupported width/height "
244 "%d %d\n", width, height);
245 return -EINVAL;
246 }
247 tmp = (width - 1) | ((height - 1) << 16);
248 writel(tmp, engine + 0x0C);
249
250 if (dst_x & 0xFFFFF000 || dst_y & 0xFFFFF000) {
251 printk(KERN_WARNING "hw_bitblt_2: Unsupported destination x/y "
252 "%d %d\n", dst_x, dst_y);
253 return -EINVAL;
254 }
255 tmp = dst_x | (dst_y << 16);
256 writel(tmp, engine + 0x10);
257
258 if (dst_addr & 0xE0000007) {
259 printk(KERN_WARNING "hw_bitblt_2: Unsupported destination "
260 "address %X\n", dst_addr);
261 return -EINVAL;
262 }
263 tmp = dst_addr >> 3;
264 writel(tmp, engine + 0x14);
265
266 if (op != VIA_BITBLT_FILL) {
267 if (src_x & (op == VIA_BITBLT_MONO ? 0xFFFF8000 : 0xFFFFF000)
268 || src_y & 0xFFFFF000) {
269 printk(KERN_WARNING "hw_bitblt_2: Unsupported source "
270 "x/y %d %d\n", src_x, src_y);
271 return -EINVAL;
272 }
273 tmp = src_x | (src_y << 16);
274 writel(tmp, engine + 0x18);
275
276 tmp = src_mem ? 0 : src_addr;
277 if (dst_addr & 0xE0000007) {
278 printk(KERN_WARNING "hw_bitblt_2: Unsupported source "
279 "address %X\n", tmp);
280 return -EINVAL;
281 }
282 tmp >>= 3;
283 writel(tmp, engine + 0x1C);
284 }
285
286 if (op == VIA_BITBLT_FILL) {
287 writel(fg_color, engine + 0x58);
288 } else if (op == VIA_BITBLT_MONO) {
289 writel(fg_color, engine + 0x4C);
290 writel(bg_color, engine + 0x50);
291 }
292
293 if (op == VIA_BITBLT_FILL)
294 ge_cmd |= fill_rop << 24 | 0x00002000 | 0x00000001;
295 else {
296 ge_cmd |= 0xCC000000; /* ROP=SRCCOPY */
297 if (src_mem)
298 ge_cmd |= 0x00000040;
299 if (op == VIA_BITBLT_MONO)
300 ge_cmd |= 0x00000002 | 0x00000100 | 0x00020000;
301 else
302 ge_cmd |= 0x00000001;
303 }
304 writel(ge_cmd, engine);
305
306 if (op == VIA_BITBLT_FILL || !src_mem)
307 return 0;
308
309 tmp = (width * height * (op == VIA_BITBLT_MONO ? 1 : (dst_bpp >> 3)) +
310 3) >> 2;
311
312 for (i = 0; i < tmp; i++)
313 writel(src_mem[i], engine + VIA_MMIO_BLTBASE);
314
315 return 0;
316 }
317
viafb_setup_engine(struct fb_info * info)318 int viafb_setup_engine(struct fb_info *info)
319 {
320 struct viafb_par *viapar = info->par;
321 void __iomem *engine;
322 u32 chip_name = viapar->shared->chip_info.gfx_chip_name;
323
324 engine = viapar->shared->vdev->engine_mmio;
325 if (!engine) {
326 printk(KERN_WARNING "viafb_init_accel: ioremap failed, "
327 "hardware acceleration disabled\n");
328 return -ENOMEM;
329 }
330
331 switch (chip_name) {
332 case UNICHROME_CLE266:
333 case UNICHROME_K400:
334 case UNICHROME_K800:
335 case UNICHROME_PM800:
336 case UNICHROME_CN700:
337 case UNICHROME_CX700:
338 case UNICHROME_CN750:
339 case UNICHROME_K8M890:
340 case UNICHROME_P4M890:
341 case UNICHROME_P4M900:
342 viapar->shared->hw_bitblt = hw_bitblt_1;
343 break;
344 case UNICHROME_VX800:
345 case UNICHROME_VX855:
346 case UNICHROME_VX900:
347 viapar->shared->hw_bitblt = hw_bitblt_2;
348 break;
349 default:
350 viapar->shared->hw_bitblt = NULL;
351 }
352
353 viapar->fbmem_free -= CURSOR_SIZE;
354 viapar->shared->cursor_vram_addr = viapar->fbmem_free;
355 viapar->fbmem_used += CURSOR_SIZE;
356
357 viapar->fbmem_free -= VQ_SIZE;
358 viapar->shared->vq_vram_addr = viapar->fbmem_free;
359 viapar->fbmem_used += VQ_SIZE;
360
361 #if IS_ENABLED(CONFIG_VIDEO_VIA_CAMERA)
362 /*
363 * Set aside a chunk of framebuffer memory for the camera
364 * driver. Someday this driver probably needs a proper allocator
365 * for fbmem; for now, we just have to do this before the
366 * framebuffer initializes itself.
367 *
368 * As for the size: the engine can handle three frames,
369 * 16 bits deep, up to VGA resolution.
370 */
371 viapar->shared->vdev->camera_fbmem_size = 3*VGA_HEIGHT*VGA_WIDTH*2;
372 viapar->fbmem_free -= viapar->shared->vdev->camera_fbmem_size;
373 viapar->fbmem_used += viapar->shared->vdev->camera_fbmem_size;
374 viapar->shared->vdev->camera_fbmem_offset = viapar->fbmem_free;
375 #endif
376
377 viafb_reset_engine(viapar);
378 return 0;
379 }
380
viafb_reset_engine(struct viafb_par * viapar)381 void viafb_reset_engine(struct viafb_par *viapar)
382 {
383 void __iomem *engine = viapar->shared->vdev->engine_mmio;
384 int highest_reg, i;
385 u32 vq_start_addr, vq_end_addr, vq_start_low, vq_end_low, vq_high,
386 vq_len, chip_name = viapar->shared->chip_info.gfx_chip_name;
387
388 /* Initialize registers to reset the 2D engine */
389 switch (viapar->shared->chip_info.twod_engine) {
390 case VIA_2D_ENG_M1:
391 highest_reg = 0x5c;
392 break;
393 default:
394 highest_reg = 0x40;
395 break;
396 }
397 for (i = 0; i <= highest_reg; i += 4)
398 writel(0x0, engine + i);
399
400 /* Init AGP and VQ regs */
401 switch (chip_name) {
402 case UNICHROME_K8M890:
403 case UNICHROME_P4M900:
404 case UNICHROME_VX800:
405 case UNICHROME_VX855:
406 case UNICHROME_VX900:
407 writel(0x00100000, engine + VIA_REG_CR_TRANSET);
408 writel(0x680A0000, engine + VIA_REG_CR_TRANSPACE);
409 writel(0x02000000, engine + VIA_REG_CR_TRANSPACE);
410 break;
411
412 default:
413 writel(0x00100000, engine + VIA_REG_TRANSET);
414 writel(0x00000000, engine + VIA_REG_TRANSPACE);
415 writel(0x00333004, engine + VIA_REG_TRANSPACE);
416 writel(0x60000000, engine + VIA_REG_TRANSPACE);
417 writel(0x61000000, engine + VIA_REG_TRANSPACE);
418 writel(0x62000000, engine + VIA_REG_TRANSPACE);
419 writel(0x63000000, engine + VIA_REG_TRANSPACE);
420 writel(0x64000000, engine + VIA_REG_TRANSPACE);
421 writel(0x7D000000, engine + VIA_REG_TRANSPACE);
422
423 writel(0xFE020000, engine + VIA_REG_TRANSET);
424 writel(0x00000000, engine + VIA_REG_TRANSPACE);
425 break;
426 }
427
428 /* Enable VQ */
429 vq_start_addr = viapar->shared->vq_vram_addr;
430 vq_end_addr = viapar->shared->vq_vram_addr + VQ_SIZE - 1;
431
432 vq_start_low = 0x50000000 | (vq_start_addr & 0xFFFFFF);
433 vq_end_low = 0x51000000 | (vq_end_addr & 0xFFFFFF);
434 vq_high = 0x52000000 | ((vq_start_addr & 0xFF000000) >> 24) |
435 ((vq_end_addr & 0xFF000000) >> 16);
436 vq_len = 0x53000000 | (VQ_SIZE >> 3);
437
438 switch (chip_name) {
439 case UNICHROME_K8M890:
440 case UNICHROME_P4M900:
441 case UNICHROME_VX800:
442 case UNICHROME_VX855:
443 case UNICHROME_VX900:
444 vq_start_low |= 0x20000000;
445 vq_end_low |= 0x20000000;
446 vq_high |= 0x20000000;
447 vq_len |= 0x20000000;
448
449 writel(0x00100000, engine + VIA_REG_CR_TRANSET);
450 writel(vq_high, engine + VIA_REG_CR_TRANSPACE);
451 writel(vq_start_low, engine + VIA_REG_CR_TRANSPACE);
452 writel(vq_end_low, engine + VIA_REG_CR_TRANSPACE);
453 writel(vq_len, engine + VIA_REG_CR_TRANSPACE);
454 writel(0x74301001, engine + VIA_REG_CR_TRANSPACE);
455 writel(0x00000000, engine + VIA_REG_CR_TRANSPACE);
456 break;
457 default:
458 writel(0x00FE0000, engine + VIA_REG_TRANSET);
459 writel(0x080003FE, engine + VIA_REG_TRANSPACE);
460 writel(0x0A00027C, engine + VIA_REG_TRANSPACE);
461 writel(0x0B000260, engine + VIA_REG_TRANSPACE);
462 writel(0x0C000274, engine + VIA_REG_TRANSPACE);
463 writel(0x0D000264, engine + VIA_REG_TRANSPACE);
464 writel(0x0E000000, engine + VIA_REG_TRANSPACE);
465 writel(0x0F000020, engine + VIA_REG_TRANSPACE);
466 writel(0x1000027E, engine + VIA_REG_TRANSPACE);
467 writel(0x110002FE, engine + VIA_REG_TRANSPACE);
468 writel(0x200F0060, engine + VIA_REG_TRANSPACE);
469
470 writel(0x00000006, engine + VIA_REG_TRANSPACE);
471 writel(0x40008C0F, engine + VIA_REG_TRANSPACE);
472 writel(0x44000000, engine + VIA_REG_TRANSPACE);
473 writel(0x45080C04, engine + VIA_REG_TRANSPACE);
474 writel(0x46800408, engine + VIA_REG_TRANSPACE);
475
476 writel(vq_high, engine + VIA_REG_TRANSPACE);
477 writel(vq_start_low, engine + VIA_REG_TRANSPACE);
478 writel(vq_end_low, engine + VIA_REG_TRANSPACE);
479 writel(vq_len, engine + VIA_REG_TRANSPACE);
480 break;
481 }
482
483 /* Set Cursor Image Base Address */
484 writel(viapar->shared->cursor_vram_addr, engine + VIA_REG_CURSOR_MODE);
485 writel(0x0, engine + VIA_REG_CURSOR_POS);
486 writel(0x0, engine + VIA_REG_CURSOR_ORG);
487 writel(0x0, engine + VIA_REG_CURSOR_BG);
488 writel(0x0, engine + VIA_REG_CURSOR_FG);
489 return;
490 }
491
viafb_show_hw_cursor(struct fb_info * info,int Status)492 void viafb_show_hw_cursor(struct fb_info *info, int Status)
493 {
494 struct viafb_par *viapar = info->par;
495 u32 temp, iga_path = viapar->iga_path;
496
497 temp = readl(viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
498 switch (Status) {
499 case HW_Cursor_ON:
500 temp |= 0x1;
501 break;
502 case HW_Cursor_OFF:
503 temp &= 0xFFFFFFFE;
504 break;
505 }
506 switch (iga_path) {
507 case IGA2:
508 temp |= 0x80000000;
509 break;
510 case IGA1:
511 default:
512 temp &= 0x7FFFFFFF;
513 }
514 writel(temp, viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
515 }
516
viafb_wait_engine_idle(struct fb_info * info)517 void viafb_wait_engine_idle(struct fb_info *info)
518 {
519 struct viafb_par *viapar = info->par;
520 int loop = 0;
521 u32 mask;
522 void __iomem *engine = viapar->shared->vdev->engine_mmio;
523
524 switch (viapar->shared->chip_info.twod_engine) {
525 case VIA_2D_ENG_H5:
526 case VIA_2D_ENG_M1:
527 mask = VIA_CMD_RGTR_BUSY_M1 | VIA_2D_ENG_BUSY_M1 |
528 VIA_3D_ENG_BUSY_M1;
529 break;
530 default:
531 while (!(readl(engine + VIA_REG_STATUS) &
532 VIA_VR_QUEUE_BUSY) && (loop < MAXLOOP)) {
533 loop++;
534 cpu_relax();
535 }
536 mask = VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY;
537 break;
538 }
539
540 while ((readl(engine + VIA_REG_STATUS) & mask) && (loop < MAXLOOP)) {
541 loop++;
542 cpu_relax();
543 }
544
545 if (loop >= MAXLOOP)
546 printk(KERN_ERR "viafb_wait_engine_idle: not syncing\n");
547 }
548
