1 // SPDX-License-Identifier: GPL-1.0+
2 /*
3 * Renesas USB driver
4 *
5 * Copyright (C) 2011 Renesas Solutions Corp.
6 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
7 */
8 #include <linux/err.h>
9 #include <linux/gpio.h>
10 #include <linux/io.h>
11 #include <linux/module.h>
12 #include <linux/of_device.h>
13 #include <linux/of_gpio.h>
14 #include <linux/pm_runtime.h>
15 #include <linux/slab.h>
16 #include <linux/sysfs.h>
17 #include "common.h"
18 #include "rcar2.h"
19 #include "rcar3.h"
20 #include "rza.h"
21
22 /*
23 * image of renesas_usbhs
24 *
25 * ex) gadget case
26
27 * mod.c
28 * mod_gadget.c
29 * mod_host.c pipe.c fifo.c
30 *
31 * +-------+ +-----------+
32 * | pipe0 |------>| fifo pio |
33 * +------------+ +-------+ +-----------+
34 * | mod_gadget |=====> | pipe1 |--+
35 * +------------+ +-------+ | +-----------+
36 * | pipe2 | | +-| fifo dma0 |
37 * +------------+ +-------+ | | +-----------+
38 * | mod_host | | pipe3 |<-|--+
39 * +------------+ +-------+ | +-----------+
40 * | .... | +--->| fifo dma1 |
41 * | .... | +-----------+
42 */
43
44
45 #define USBHSF_RUNTIME_PWCTRL (1 << 0)
46
47 /* status */
48 #define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0)
49 #define usbhsc_flags_set(p, b) ((p)->flags |= (b))
50 #define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b))
51 #define usbhsc_flags_has(p, b) ((p)->flags & (b))
52
53 /*
54 * platform call back
55 *
56 * renesas usb support platform callback function.
57 * Below macro call it.
58 * if platform doesn't have callback, it return 0 (no error)
59 */
60 #define usbhs_platform_call(priv, func, args...)\
61 (!(priv) ? -ENODEV : \
62 !((priv)->pfunc.func) ? 0 : \
63 (priv)->pfunc.func(args))
64
65 /*
66 * common functions
67 */
usbhs_read(struct usbhs_priv * priv,u32 reg)68 u16 usbhs_read(struct usbhs_priv *priv, u32 reg)
69 {
70 return ioread16(priv->base + reg);
71 }
72
usbhs_write(struct usbhs_priv * priv,u32 reg,u16 data)73 void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data)
74 {
75 iowrite16(data, priv->base + reg);
76 }
77
usbhs_bset(struct usbhs_priv * priv,u32 reg,u16 mask,u16 data)78 void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data)
79 {
80 u16 val = usbhs_read(priv, reg);
81
82 val &= ~mask;
83 val |= data & mask;
84
85 usbhs_write(priv, reg, val);
86 }
87
usbhs_pdev_to_priv(struct platform_device * pdev)88 struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev)
89 {
90 return dev_get_drvdata(&pdev->dev);
91 }
92
93 /*
94 * syscfg functions
95 */
usbhs_sys_clock_ctrl(struct usbhs_priv * priv,int enable)96 static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable)
97 {
98 usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0);
99 }
100
usbhs_sys_host_ctrl(struct usbhs_priv * priv,int enable)101 void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable)
102 {
103 u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
104 u16 val = DCFM | DRPD | HSE | USBE;
105 int has_otg = usbhs_get_dparam(priv, has_otg);
106
107 if (has_otg)
108 usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN));
109
110 /*
111 * if enable
112 *
113 * - select Host mode
114 * - D+ Line/D- Line Pull-down
115 */
116 usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
117 }
118
usbhs_sys_function_ctrl(struct usbhs_priv * priv,int enable)119 void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
120 {
121 u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
122 u16 val = HSE | USBE;
123
124 /*
125 * if enable
126 *
127 * - select Function mode
128 * - D+ Line Pull-up is disabled
129 * When D+ Line Pull-up is enabled,
130 * calling usbhs_sys_function_pullup(,1)
131 */
132 usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
133 }
134
usbhs_sys_function_pullup(struct usbhs_priv * priv,int enable)135 void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
136 {
137 usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
138 }
139
usbhs_sys_set_test_mode(struct usbhs_priv * priv,u16 mode)140 void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
141 {
142 usbhs_write(priv, TESTMODE, mode);
143 }
144
145 /*
146 * frame functions
147 */
usbhs_frame_get_num(struct usbhs_priv * priv)148 int usbhs_frame_get_num(struct usbhs_priv *priv)
149 {
150 return usbhs_read(priv, FRMNUM) & FRNM_MASK;
151 }
152
153 /*
154 * usb request functions
155 */
usbhs_usbreq_get_val(struct usbhs_priv * priv,struct usb_ctrlrequest * req)156 void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
157 {
158 u16 val;
159
160 val = usbhs_read(priv, USBREQ);
161 req->bRequest = (val >> 8) & 0xFF;
162 req->bRequestType = (val >> 0) & 0xFF;
163
164 req->wValue = usbhs_read(priv, USBVAL);
165 req->wIndex = usbhs_read(priv, USBINDX);
166 req->wLength = usbhs_read(priv, USBLENG);
167 }
168
usbhs_usbreq_set_val(struct usbhs_priv * priv,struct usb_ctrlrequest * req)169 void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
170 {
171 usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType);
172 usbhs_write(priv, USBVAL, req->wValue);
173 usbhs_write(priv, USBINDX, req->wIndex);
174 usbhs_write(priv, USBLENG, req->wLength);
175
176 usbhs_bset(priv, DCPCTR, SUREQ, SUREQ);
177 }
178
179 /*
180 * bus/vbus functions
181 */
usbhs_bus_send_sof_enable(struct usbhs_priv * priv)182 void usbhs_bus_send_sof_enable(struct usbhs_priv *priv)
183 {
184 u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT);
185
186 if (status != USBRST) {
187 struct device *dev = usbhs_priv_to_dev(priv);
188 dev_err(dev, "usbhs should be reset\n");
189 }
190
191 usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT);
192 }
193
usbhs_bus_send_reset(struct usbhs_priv * priv)194 void usbhs_bus_send_reset(struct usbhs_priv *priv)
195 {
196 usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST);
197 }
198
usbhs_bus_get_speed(struct usbhs_priv * priv)199 int usbhs_bus_get_speed(struct usbhs_priv *priv)
200 {
201 u16 dvstctr = usbhs_read(priv, DVSTCTR);
202
203 switch (RHST & dvstctr) {
204 case RHST_LOW_SPEED:
205 return USB_SPEED_LOW;
206 case RHST_FULL_SPEED:
207 return USB_SPEED_FULL;
208 case RHST_HIGH_SPEED:
209 return USB_SPEED_HIGH;
210 }
211
212 return USB_SPEED_UNKNOWN;
213 }
214
usbhs_vbus_ctrl(struct usbhs_priv * priv,int enable)215 int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable)
216 {
217 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
218
219 return usbhs_platform_call(priv, set_vbus, pdev, enable);
220 }
221
usbhsc_bus_init(struct usbhs_priv * priv)222 static void usbhsc_bus_init(struct usbhs_priv *priv)
223 {
224 usbhs_write(priv, DVSTCTR, 0);
225
226 usbhs_vbus_ctrl(priv, 0);
227 }
228
229 /*
230 * device configuration
231 */
usbhs_set_device_config(struct usbhs_priv * priv,int devnum,u16 upphub,u16 hubport,u16 speed)232 int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
233 u16 upphub, u16 hubport, u16 speed)
234 {
235 struct device *dev = usbhs_priv_to_dev(priv);
236 u16 usbspd = 0;
237 u32 reg = DEVADD0 + (2 * devnum);
238
239 if (devnum > 10) {
240 dev_err(dev, "cannot set speed to unknown device %d\n", devnum);
241 return -EIO;
242 }
243
244 if (upphub > 0xA) {
245 dev_err(dev, "unsupported hub number %d\n", upphub);
246 return -EIO;
247 }
248
249 switch (speed) {
250 case USB_SPEED_LOW:
251 usbspd = USBSPD_SPEED_LOW;
252 break;
253 case USB_SPEED_FULL:
254 usbspd = USBSPD_SPEED_FULL;
255 break;
256 case USB_SPEED_HIGH:
257 usbspd = USBSPD_SPEED_HIGH;
258 break;
259 default:
260 dev_err(dev, "unsupported speed %d\n", speed);
261 return -EIO;
262 }
263
264 usbhs_write(priv, reg, UPPHUB(upphub) |
265 HUBPORT(hubport)|
266 USBSPD(usbspd));
267
268 return 0;
269 }
270
271 /*
272 * interrupt functions
273 */
usbhs_xxxsts_clear(struct usbhs_priv * priv,u16 sts_reg,u16 bit)274 void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit)
275 {
276 u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0);
277
278 usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask);
279 }
280
281 /*
282 * local functions
283 */
usbhsc_set_buswait(struct usbhs_priv * priv)284 static void usbhsc_set_buswait(struct usbhs_priv *priv)
285 {
286 int wait = usbhs_get_dparam(priv, buswait_bwait);
287
288 /* set bus wait if platform have */
289 if (wait)
290 usbhs_bset(priv, BUSWAIT, 0x000F, wait);
291 }
292
293 /*
294 * platform default param
295 */
296
297 /* commonly used on old SH-Mobile SoCs */
298 static struct renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = {
299 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
300 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, false),
301 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x18, false),
302 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x28, true),
303 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x38, true),
304 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
305 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
306 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
307 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
308 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x07, false),
309 };
310
311 /* commonly used on newer SH-Mobile and R-Car SoCs */
312 static struct renesas_usbhs_driver_pipe_config usbhsc_new_pipe[] = {
313 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
314 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, true),
315 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x28, true),
316 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
317 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x58, true),
318 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x68, true),
319 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
320 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
321 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
322 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x78, true),
323 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x88, true),
324 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x98, true),
325 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xa8, true),
326 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xb8, true),
327 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xc8, true),
328 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xd8, true),
329 };
330
331 /*
332 * power control
333 */
usbhsc_power_ctrl(struct usbhs_priv * priv,int enable)334 static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable)
335 {
336 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
337 struct device *dev = usbhs_priv_to_dev(priv);
338
339 if (enable) {
340 /* enable PM */
341 pm_runtime_get_sync(dev);
342
343 /* enable platform power */
344 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
345
346 /* USB on */
347 usbhs_sys_clock_ctrl(priv, enable);
348 } else {
349 /* USB off */
350 usbhs_sys_clock_ctrl(priv, enable);
351
352 /* disable platform power */
353 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
354
355 /* disable PM */
356 pm_runtime_put_sync(dev);
357 }
358 }
359
360 /*
361 * hotplug
362 */
usbhsc_hotplug(struct usbhs_priv * priv)363 static void usbhsc_hotplug(struct usbhs_priv *priv)
364 {
365 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
366 struct usbhs_mod *mod = usbhs_mod_get_current(priv);
367 int id;
368 int enable;
369 int cable;
370 int ret;
371
372 /*
373 * get vbus status from platform
374 */
375 enable = usbhs_platform_call(priv, get_vbus, pdev);
376
377 /*
378 * get id from platform
379 */
380 id = usbhs_platform_call(priv, get_id, pdev);
381
382 if (enable && !mod) {
383 if (priv->edev) {
384 cable = extcon_get_state(priv->edev, EXTCON_USB_HOST);
385 if ((cable > 0 && id != USBHS_HOST) ||
386 (!cable && id != USBHS_GADGET)) {
387 dev_info(&pdev->dev,
388 "USB cable plugged in doesn't match the selected role!\n");
389 return;
390 }
391 }
392
393 ret = usbhs_mod_change(priv, id);
394 if (ret < 0)
395 return;
396
397 dev_dbg(&pdev->dev, "%s enable\n", __func__);
398
399 /* power on */
400 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
401 usbhsc_power_ctrl(priv, enable);
402
403 /* bus init */
404 usbhsc_set_buswait(priv);
405 usbhsc_bus_init(priv);
406
407 /* module start */
408 usbhs_mod_call(priv, start, priv);
409
410 } else if (!enable && mod) {
411 dev_dbg(&pdev->dev, "%s disable\n", __func__);
412
413 /* module stop */
414 usbhs_mod_call(priv, stop, priv);
415
416 /* bus init */
417 usbhsc_bus_init(priv);
418
419 /* power off */
420 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
421 usbhsc_power_ctrl(priv, enable);
422
423 usbhs_mod_change(priv, -1);
424
425 /* reset phy for next connection */
426 usbhs_platform_call(priv, phy_reset, pdev);
427 }
428 }
429
430 /*
431 * notify hotplug
432 */
usbhsc_notify_hotplug(struct work_struct * work)433 static void usbhsc_notify_hotplug(struct work_struct *work)
434 {
435 struct usbhs_priv *priv = container_of(work,
436 struct usbhs_priv,
437 notify_hotplug_work.work);
438 usbhsc_hotplug(priv);
439 }
440
usbhsc_drvcllbck_notify_hotplug(struct platform_device * pdev)441 static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
442 {
443 struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
444 int delay = usbhs_get_dparam(priv, detection_delay);
445
446 /*
447 * This functions will be called in interrupt.
448 * To make sure safety context,
449 * use workqueue for usbhs_notify_hotplug
450 */
451 schedule_delayed_work(&priv->notify_hotplug_work,
452 msecs_to_jiffies(delay));
453 return 0;
454 }
455
456 /*
457 * platform functions
458 */
459 static const struct of_device_id usbhs_of_match[] = {
460 {
461 .compatible = "renesas,usbhs-r8a7790",
462 .data = (void *)USBHS_TYPE_RCAR_GEN2,
463 },
464 {
465 .compatible = "renesas,usbhs-r8a7791",
466 .data = (void *)USBHS_TYPE_RCAR_GEN2,
467 },
468 {
469 .compatible = "renesas,usbhs-r8a7794",
470 .data = (void *)USBHS_TYPE_RCAR_GEN2,
471 },
472 {
473 .compatible = "renesas,usbhs-r8a7795",
474 .data = (void *)USBHS_TYPE_RCAR_GEN3,
475 },
476 {
477 .compatible = "renesas,usbhs-r8a7796",
478 .data = (void *)USBHS_TYPE_RCAR_GEN3,
479 },
480 {
481 .compatible = "renesas,usbhs-r8a77995",
482 .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL,
483 },
484 {
485 .compatible = "renesas,rcar-gen2-usbhs",
486 .data = (void *)USBHS_TYPE_RCAR_GEN2,
487 },
488 {
489 .compatible = "renesas,rcar-gen3-usbhs",
490 .data = (void *)USBHS_TYPE_RCAR_GEN3,
491 },
492 {
493 .compatible = "renesas,rza1-usbhs",
494 .data = (void *)USBHS_TYPE_RZA1,
495 },
496 { },
497 };
498 MODULE_DEVICE_TABLE(of, usbhs_of_match);
499
usbhs_parse_dt(struct device * dev)500 static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
501 {
502 struct renesas_usbhs_platform_info *info;
503 struct renesas_usbhs_driver_param *dparam;
504 u32 tmp;
505 int gpio;
506
507 info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
508 if (!info)
509 return NULL;
510
511 dparam = &info->driver_param;
512 dparam->type = (uintptr_t)of_device_get_match_data(dev);
513 if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp))
514 dparam->buswait_bwait = tmp;
515 gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0,
516 NULL);
517 if (gpio > 0)
518 dparam->enable_gpio = gpio;
519
520 if (dparam->type == USBHS_TYPE_RCAR_GEN2 ||
521 dparam->type == USBHS_TYPE_RCAR_GEN3 ||
522 dparam->type == USBHS_TYPE_RCAR_GEN3_WITH_PLL) {
523 dparam->has_usb_dmac = 1;
524 dparam->pipe_configs = usbhsc_new_pipe;
525 dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
526 }
527
528 if (dparam->type == USBHS_TYPE_RZA1) {
529 dparam->pipe_configs = usbhsc_new_pipe;
530 dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
531 }
532
533 return info;
534 }
535
usbhs_probe(struct platform_device * pdev)536 static int usbhs_probe(struct platform_device *pdev)
537 {
538 struct renesas_usbhs_platform_info *info = renesas_usbhs_get_info(pdev);
539 struct renesas_usbhs_driver_callback *dfunc;
540 struct usbhs_priv *priv;
541 struct resource *res, *irq_res;
542 int ret;
543
544 /* check device node */
545 if (pdev->dev.of_node)
546 info = pdev->dev.platform_data = usbhs_parse_dt(&pdev->dev);
547
548 /* check platform information */
549 if (!info) {
550 dev_err(&pdev->dev, "no platform information\n");
551 return -EINVAL;
552 }
553
554 /* platform data */
555 irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
556 if (!irq_res) {
557 dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n");
558 return -ENODEV;
559 }
560
561 /* usb private data */
562 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
563 if (!priv)
564 return -ENOMEM;
565
566 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
567 priv->base = devm_ioremap_resource(&pdev->dev, res);
568 if (IS_ERR(priv->base))
569 return PTR_ERR(priv->base);
570
571 if (of_property_read_bool(pdev->dev.of_node, "extcon")) {
572 priv->edev = extcon_get_edev_by_phandle(&pdev->dev, 0);
573 if (IS_ERR(priv->edev))
574 return PTR_ERR(priv->edev);
575 }
576
577 /*
578 * care platform info
579 */
580
581 memcpy(&priv->dparam,
582 &info->driver_param,
583 sizeof(struct renesas_usbhs_driver_param));
584
585 switch (priv->dparam.type) {
586 case USBHS_TYPE_RCAR_GEN2:
587 priv->pfunc = usbhs_rcar2_ops;
588 break;
589 case USBHS_TYPE_RCAR_GEN3:
590 priv->pfunc = usbhs_rcar3_ops;
591 break;
592 case USBHS_TYPE_RCAR_GEN3_WITH_PLL:
593 priv->pfunc = usbhs_rcar3_with_pll_ops;
594 if (!IS_ERR_OR_NULL(priv->edev)) {
595 priv->nb.notifier_call = priv->pfunc.notifier;
596 ret = devm_extcon_register_notifier(&pdev->dev,
597 priv->edev,
598 EXTCON_USB_HOST,
599 &priv->nb);
600 if (ret < 0)
601 dev_err(&pdev->dev, "no notifier registered\n");
602 }
603 break;
604 case USBHS_TYPE_RZA1:
605 priv->pfunc = usbhs_rza1_ops;
606 break;
607 default:
608 if (!info->platform_callback.get_id) {
609 dev_err(&pdev->dev, "no platform callbacks");
610 return -EINVAL;
611 }
612 memcpy(&priv->pfunc,
613 &info->platform_callback,
614 sizeof(struct renesas_usbhs_platform_callback));
615 break;
616 }
617
618 /* set driver callback functions for platform */
619 dfunc = &info->driver_callback;
620 dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug;
621
622 /* set default param if platform doesn't have */
623 if (!priv->dparam.pipe_configs) {
624 priv->dparam.pipe_configs = usbhsc_default_pipe;
625 priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe);
626 }
627 if (!priv->dparam.pio_dma_border)
628 priv->dparam.pio_dma_border = 64; /* 64byte */
629
630 /* FIXME */
631 /* runtime power control ? */
632 if (priv->pfunc.get_vbus)
633 usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL);
634
635 /*
636 * priv settings
637 */
638 priv->irq = irq_res->start;
639 if (irq_res->flags & IORESOURCE_IRQ_SHAREABLE)
640 priv->irqflags = IRQF_SHARED;
641 priv->pdev = pdev;
642 INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
643 spin_lock_init(usbhs_priv_to_lock(priv));
644
645 /* call pipe and module init */
646 ret = usbhs_pipe_probe(priv);
647 if (ret < 0)
648 return ret;
649
650 ret = usbhs_fifo_probe(priv);
651 if (ret < 0)
652 goto probe_end_pipe_exit;
653
654 ret = usbhs_mod_probe(priv);
655 if (ret < 0)
656 goto probe_end_fifo_exit;
657
658 /* dev_set_drvdata should be called after usbhs_mod_init */
659 platform_set_drvdata(pdev, priv);
660
661 /*
662 * deviece reset here because
663 * USB device might be used in boot loader.
664 */
665 usbhs_sys_clock_ctrl(priv, 0);
666
667 /* check GPIO determining if USB function should be enabled */
668 if (priv->dparam.enable_gpio) {
669 gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL);
670 ret = !gpio_get_value(priv->dparam.enable_gpio);
671 gpio_free(priv->dparam.enable_gpio);
672 if (ret) {
673 dev_warn(&pdev->dev,
674 "USB function not selected (GPIO %d)\n",
675 priv->dparam.enable_gpio);
676 ret = -ENOTSUPP;
677 goto probe_end_mod_exit;
678 }
679 }
680
681 /*
682 * platform call
683 *
684 * USB phy setup might depend on CPU/Board.
685 * If platform has its callback functions,
686 * call it here.
687 */
688 ret = usbhs_platform_call(priv, hardware_init, pdev);
689 if (ret < 0) {
690 dev_err(&pdev->dev, "platform init failed.\n");
691 goto probe_end_mod_exit;
692 }
693
694 /* reset phy for connection */
695 usbhs_platform_call(priv, phy_reset, pdev);
696
697 /* power control */
698 pm_runtime_enable(&pdev->dev);
699 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) {
700 usbhsc_power_ctrl(priv, 1);
701 usbhs_mod_autonomy_mode(priv);
702 }
703
704 /*
705 * manual call notify_hotplug for cold plug
706 */
707 usbhsc_drvcllbck_notify_hotplug(pdev);
708
709 dev_info(&pdev->dev, "probed\n");
710
711 return ret;
712
713 probe_end_mod_exit:
714 usbhs_mod_remove(priv);
715 probe_end_fifo_exit:
716 usbhs_fifo_remove(priv);
717 probe_end_pipe_exit:
718 usbhs_pipe_remove(priv);
719
720 dev_info(&pdev->dev, "probe failed (%d)\n", ret);
721
722 return ret;
723 }
724
usbhs_remove(struct platform_device * pdev)725 static int usbhs_remove(struct platform_device *pdev)
726 {
727 struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
728 struct renesas_usbhs_platform_info *info = renesas_usbhs_get_info(pdev);
729 struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback;
730
731 dev_dbg(&pdev->dev, "usb remove\n");
732
733 dfunc->notify_hotplug = NULL;
734
735 /* power off */
736 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
737 usbhsc_power_ctrl(priv, 0);
738
739 pm_runtime_disable(&pdev->dev);
740
741 usbhs_platform_call(priv, hardware_exit, pdev);
742 usbhs_mod_remove(priv);
743 usbhs_fifo_remove(priv);
744 usbhs_pipe_remove(priv);
745
746 return 0;
747 }
748
usbhsc_suspend(struct device * dev)749 static int usbhsc_suspend(struct device *dev)
750 {
751 struct usbhs_priv *priv = dev_get_drvdata(dev);
752 struct usbhs_mod *mod = usbhs_mod_get_current(priv);
753
754 if (mod) {
755 usbhs_mod_call(priv, stop, priv);
756 usbhs_mod_change(priv, -1);
757 }
758
759 if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
760 usbhsc_power_ctrl(priv, 0);
761
762 return 0;
763 }
764
usbhsc_resume(struct device * dev)765 static int usbhsc_resume(struct device *dev)
766 {
767 struct usbhs_priv *priv = dev_get_drvdata(dev);
768 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
769
770 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) {
771 usbhsc_power_ctrl(priv, 1);
772 usbhs_mod_autonomy_mode(priv);
773 }
774
775 usbhs_platform_call(priv, phy_reset, pdev);
776
777 usbhsc_drvcllbck_notify_hotplug(pdev);
778
779 return 0;
780 }
781
usbhsc_runtime_nop(struct device * dev)782 static int usbhsc_runtime_nop(struct device *dev)
783 {
784 /* Runtime PM callback shared between ->runtime_suspend()
785 * and ->runtime_resume(). Simply returns success.
786 *
787 * This driver re-initializes all registers after
788 * pm_runtime_get_sync() anyway so there is no need
789 * to save and restore registers here.
790 */
791 return 0;
792 }
793
794 static const struct dev_pm_ops usbhsc_pm_ops = {
795 .suspend = usbhsc_suspend,
796 .resume = usbhsc_resume,
797 .runtime_suspend = usbhsc_runtime_nop,
798 .runtime_resume = usbhsc_runtime_nop,
799 };
800
801 static struct platform_driver renesas_usbhs_driver = {
802 .driver = {
803 .name = "renesas_usbhs",
804 .pm = &usbhsc_pm_ops,
805 .of_match_table = of_match_ptr(usbhs_of_match),
806 },
807 .probe = usbhs_probe,
808 .remove = usbhs_remove,
809 };
810
811 module_platform_driver(renesas_usbhs_driver);
812
813 MODULE_LICENSE("GPL");
814 MODULE_DESCRIPTION("Renesas USB driver");
815 MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
816
