1 /* 2 * Copyright (C) ST-Ericsson SA 2010 3 * Author: Shujuan Chen (shujuan.chen@stericsson.com) 4 * Author: Joakim Bech (joakim.xx.bech@stericsson.com) 5 * Author: Berne Hebark (berne.hebark@stericsson.com)) 6 * License terms: GNU General Public License (GPL) version 2 7 */ 8 #ifndef _HASH_ALG_H 9 #define _HASH_ALG_H 10 11 #include <linux/bitops.h> 12 13 #define HASH_BLOCK_SIZE 64 14 #define HASH_DMA_FIFO 4 15 #define HASH_DMA_ALIGN_SIZE 4 16 #define HASH_DMA_PERFORMANCE_MIN_SIZE 1024 17 #define HASH_BYTES_PER_WORD 4 18 19 /* Maximum value of the length's high word */ 20 #define HASH_HIGH_WORD_MAX_VAL 0xFFFFFFFFUL 21 22 /* Power on Reset values HASH registers */ 23 #define HASH_RESET_CR_VALUE 0x0 24 #define HASH_RESET_STR_VALUE 0x0 25 26 /* Number of context swap registers */ 27 #define HASH_CSR_COUNT 52 28 29 #define HASH_RESET_CSRX_REG_VALUE 0x0 30 #define HASH_RESET_CSFULL_REG_VALUE 0x0 31 #define HASH_RESET_CSDATAIN_REG_VALUE 0x0 32 33 #define HASH_RESET_INDEX_VAL 0x0 34 #define HASH_RESET_BIT_INDEX_VAL 0x0 35 #define HASH_RESET_BUFFER_VAL 0x0 36 #define HASH_RESET_LEN_HIGH_VAL 0x0 37 #define HASH_RESET_LEN_LOW_VAL 0x0 38 39 /* Control register bitfields */ 40 #define HASH_CR_RESUME_MASK 0x11FCF 41 42 #define HASH_CR_SWITCHON_POS 31 43 #define HASH_CR_SWITCHON_MASK BIT(31) 44 45 #define HASH_CR_EMPTYMSG_POS 20 46 #define HASH_CR_EMPTYMSG_MASK BIT(20) 47 48 #define HASH_CR_DINF_POS 12 49 #define HASH_CR_DINF_MASK BIT(12) 50 51 #define HASH_CR_NBW_POS 8 52 #define HASH_CR_NBW_MASK 0x00000F00UL 53 54 #define HASH_CR_LKEY_POS 16 55 #define HASH_CR_LKEY_MASK BIT(16) 56 57 #define HASH_CR_ALGO_POS 7 58 #define HASH_CR_ALGO_MASK BIT(7) 59 60 #define HASH_CR_MODE_POS 6 61 #define HASH_CR_MODE_MASK BIT(6) 62 63 #define HASH_CR_DATAFORM_POS 4 64 #define HASH_CR_DATAFORM_MASK (BIT(4) | BIT(5)) 65 66 #define HASH_CR_DMAE_POS 3 67 #define HASH_CR_DMAE_MASK BIT(3) 68 69 #define HASH_CR_INIT_POS 2 70 #define HASH_CR_INIT_MASK BIT(2) 71 72 #define HASH_CR_PRIVN_POS 1 73 #define HASH_CR_PRIVN_MASK BIT(1) 74 75 #define HASH_CR_SECN_POS 0 76 #define HASH_CR_SECN_MASK BIT(0) 77 78 /* Start register bitfields */ 79 #define HASH_STR_DCAL_POS 8 80 #define HASH_STR_DCAL_MASK BIT(8) 81 #define HASH_STR_DEFAULT 0x0 82 83 #define HASH_STR_NBLW_POS 0 84 #define HASH_STR_NBLW_MASK 0x0000001FUL 85 86 #define HASH_NBLW_MAX_VAL 0x1F 87 88 /* PrimeCell IDs */ 89 #define HASH_P_ID0 0xE0 90 #define HASH_P_ID1 0x05 91 #define HASH_P_ID2 0x38 92 #define HASH_P_ID3 0x00 93 #define HASH_CELL_ID0 0x0D 94 #define HASH_CELL_ID1 0xF0 95 #define HASH_CELL_ID2 0x05 96 #define HASH_CELL_ID3 0xB1 97 98 #define HASH_SET_BITS(reg_name, mask) \ 99 writel_relaxed((readl_relaxed(reg_name) | mask), reg_name) 100 101 #define HASH_CLEAR_BITS(reg_name, mask) \ 102 writel_relaxed((readl_relaxed(reg_name) & ~mask), reg_name) 103 104 #define HASH_PUT_BITS(reg, val, shift, mask) \ 105 writel_relaxed(((readl(reg) & ~(mask)) | \ 106 (((u32)val << shift) & (mask))), reg) 107 108 #define HASH_SET_DIN(val, len) writesl(&device_data->base->din, (val), (len)) 109 110 #define HASH_INITIALIZE \ 111 HASH_PUT_BITS( \ 112 &device_data->base->cr, \ 113 0x01, HASH_CR_INIT_POS, \ 114 HASH_CR_INIT_MASK) 115 116 #define HASH_SET_DATA_FORMAT(data_format) \ 117 HASH_PUT_BITS( \ 118 &device_data->base->cr, \ 119 (u32) (data_format), HASH_CR_DATAFORM_POS, \ 120 HASH_CR_DATAFORM_MASK) 121 #define HASH_SET_NBLW(val) \ 122 HASH_PUT_BITS( \ 123 &device_data->base->str, \ 124 (u32) (val), HASH_STR_NBLW_POS, \ 125 HASH_STR_NBLW_MASK) 126 #define HASH_SET_DCAL \ 127 HASH_PUT_BITS( \ 128 &device_data->base->str, \ 129 0x01, HASH_STR_DCAL_POS, \ 130 HASH_STR_DCAL_MASK) 131 132 /* Hardware access method */ 133 enum hash_mode { 134 HASH_MODE_CPU, 135 HASH_MODE_DMA 136 }; 137 138 /** 139 * struct uint64 - Structure to handle 64 bits integers. 140 * @high_word: Most significant bits. 141 * @low_word: Least significant bits. 142 * 143 * Used to handle 64 bits integers. 144 */ 145 struct uint64 { 146 u32 high_word; 147 u32 low_word; 148 }; 149 150 /** 151 * struct hash_register - Contains all registers in ux500 hash hardware. 152 * @cr: HASH control register (0x000). 153 * @din: HASH data input register (0x004). 154 * @str: HASH start register (0x008). 155 * @hx: HASH digest register 0..7 (0x00c-0x01C). 156 * @padding0: Reserved (0x02C). 157 * @itcr: Integration test control register (0x080). 158 * @itip: Integration test input register (0x084). 159 * @itop: Integration test output register (0x088). 160 * @padding1: Reserved (0x08C). 161 * @csfull: HASH context full register (0x0F8). 162 * @csdatain: HASH context swap data input register (0x0FC). 163 * @csrx: HASH context swap register 0..51 (0x100-0x1CC). 164 * @padding2: Reserved (0x1D0). 165 * @periphid0: HASH peripheral identification register 0 (0xFE0). 166 * @periphid1: HASH peripheral identification register 1 (0xFE4). 167 * @periphid2: HASH peripheral identification register 2 (0xFE8). 168 * @periphid3: HASH peripheral identification register 3 (0xFEC). 169 * @cellid0: HASH PCell identification register 0 (0xFF0). 170 * @cellid1: HASH PCell identification register 1 (0xFF4). 171 * @cellid2: HASH PCell identification register 2 (0xFF8). 172 * @cellid3: HASH PCell identification register 3 (0xFFC). 173 * 174 * The device communicates to the HASH via 32-bit-wide control registers 175 * accessible via the 32-bit width AMBA rev. 2.0 AHB Bus. Below is a structure 176 * with the registers used. 177 */ 178 struct hash_register { 179 u32 cr; 180 u32 din; 181 u32 str; 182 u32 hx[8]; 183 184 u32 padding0[(0x080 - 0x02C) / sizeof(u32)]; 185 186 u32 itcr; 187 u32 itip; 188 u32 itop; 189 190 u32 padding1[(0x0F8 - 0x08C) / sizeof(u32)]; 191 192 u32 csfull; 193 u32 csdatain; 194 u32 csrx[HASH_CSR_COUNT]; 195 196 u32 padding2[(0xFE0 - 0x1D0) / sizeof(u32)]; 197 198 u32 periphid0; 199 u32 periphid1; 200 u32 periphid2; 201 u32 periphid3; 202 203 u32 cellid0; 204 u32 cellid1; 205 u32 cellid2; 206 u32 cellid3; 207 }; 208 209 /** 210 * struct hash_state - Hash context state. 211 * @temp_cr: Temporary HASH Control Register. 212 * @str_reg: HASH Start Register. 213 * @din_reg: HASH Data Input Register. 214 * @csr[52]: HASH Context Swap Registers 0-39. 215 * @csfull: HASH Context Swap Registers 40 ie Status flags. 216 * @csdatain: HASH Context Swap Registers 41 ie Input data. 217 * @buffer: Working buffer for messages going to the hardware. 218 * @length: Length of the part of message hashed so far (floor(N/64) * 64). 219 * @index: Valid number of bytes in buffer (N % 64). 220 * @bit_index: Valid number of bits in buffer (N % 8). 221 * 222 * This structure is used between context switches, i.e. when ongoing jobs are 223 * interupted with new jobs. When this happens we need to store intermediate 224 * results in software. 225 * 226 * WARNING: "index" is the member of the structure, to be sure that "buffer" 227 * is aligned on a 4-bytes boundary. This is highly implementation dependent 228 * and MUST be checked whenever this code is ported on new platforms. 229 */ 230 struct hash_state { 231 u32 temp_cr; 232 u32 str_reg; 233 u32 din_reg; 234 u32 csr[52]; 235 u32 csfull; 236 u32 csdatain; 237 u32 buffer[HASH_BLOCK_SIZE / sizeof(u32)]; 238 struct uint64 length; 239 u8 index; 240 u8 bit_index; 241 }; 242 243 /** 244 * enum hash_device_id - HASH device ID. 245 * @HASH_DEVICE_ID_0: Hash hardware with ID 0 246 * @HASH_DEVICE_ID_1: Hash hardware with ID 1 247 */ 248 enum hash_device_id { 249 HASH_DEVICE_ID_0 = 0, 250 HASH_DEVICE_ID_1 = 1 251 }; 252 253 /** 254 * enum hash_data_format - HASH data format. 255 * @HASH_DATA_32_BITS: 32 bits data format 256 * @HASH_DATA_16_BITS: 16 bits data format 257 * @HASH_DATA_8_BITS: 8 bits data format. 258 * @HASH_DATA_1_BITS: 1 bit data format. 259 */ 260 enum hash_data_format { 261 HASH_DATA_32_BITS = 0x0, 262 HASH_DATA_16_BITS = 0x1, 263 HASH_DATA_8_BITS = 0x2, 264 HASH_DATA_1_BIT = 0x3 265 }; 266 267 /** 268 * enum hash_algo - Enumeration for selecting between SHA1 or SHA2 algorithm. 269 * @HASH_ALGO_SHA1: Indicates that SHA1 is used. 270 * @HASH_ALGO_SHA2: Indicates that SHA2 (SHA256) is used. 271 */ 272 enum hash_algo { 273 HASH_ALGO_SHA1 = 0x0, 274 HASH_ALGO_SHA256 = 0x1 275 }; 276 277 /** 278 * enum hash_op - Enumeration for selecting between HASH or HMAC mode. 279 * @HASH_OPER_MODE_HASH: Indicates usage of normal HASH mode. 280 * @HASH_OPER_MODE_HMAC: Indicates usage of HMAC. 281 */ 282 enum hash_op { 283 HASH_OPER_MODE_HASH = 0x0, 284 HASH_OPER_MODE_HMAC = 0x1 285 }; 286 287 /** 288 * struct hash_config - Configuration data for the hardware. 289 * @data_format: Format of data entered into the hash data in register. 290 * @algorithm: Algorithm selection bit. 291 * @oper_mode: Operating mode selection bit. 292 */ 293 struct hash_config { 294 int data_format; 295 int algorithm; 296 int oper_mode; 297 }; 298 299 /** 300 * struct hash_dma - Structure used for dma. 301 * @mask: DMA capabilities bitmap mask. 302 * @complete: Used to maintain state for a "completion". 303 * @chan_mem2hash: DMA channel. 304 * @cfg_mem2hash: DMA channel configuration. 305 * @sg_len: Scatterlist length. 306 * @sg: Scatterlist. 307 * @nents: Number of sg entries. 308 */ 309 struct hash_dma { 310 dma_cap_mask_t mask; 311 struct completion complete; 312 struct dma_chan *chan_mem2hash; 313 void *cfg_mem2hash; 314 int sg_len; 315 struct scatterlist *sg; 316 int nents; 317 }; 318 319 /** 320 * struct hash_ctx - The context used for hash calculations. 321 * @key: The key used in the operation. 322 * @keylen: The length of the key. 323 * @state: The state of the current calculations. 324 * @config: The current configuration. 325 * @digestsize: The size of current digest. 326 * @device: Pointer to the device structure. 327 */ 328 struct hash_ctx { 329 u8 *key; 330 u32 keylen; 331 struct hash_config config; 332 int digestsize; 333 struct hash_device_data *device; 334 }; 335 336 /** 337 * struct hash_ctx - The request context used for hash calculations. 338 * @state: The state of the current calculations. 339 * @dma_mode: Used in special cases (workaround), e.g. need to change to 340 * cpu mode, if not supported/working in dma mode. 341 * @updated: Indicates if hardware is initialized for new operations. 342 */ 343 struct hash_req_ctx { 344 struct hash_state state; 345 bool dma_mode; 346 u8 updated; 347 }; 348 349 /** 350 * struct hash_device_data - structure for a hash device. 351 * @base: Pointer to virtual base address of the hash device. 352 * @phybase: Pointer to physical memory location of the hash device. 353 * @list_node: For inclusion in klist. 354 * @dev: Pointer to the device dev structure. 355 * @ctx_lock: Spinlock for current_ctx. 356 * @current_ctx: Pointer to the currently allocated context. 357 * @power_state: TRUE = power state on, FALSE = power state off. 358 * @power_state_lock: Spinlock for power_state. 359 * @regulator: Pointer to the device's power control. 360 * @clk: Pointer to the device's clock control. 361 * @restore_dev_state: TRUE = saved state, FALSE = no saved state. 362 * @dma: Structure used for dma. 363 */ 364 struct hash_device_data { 365 struct hash_register __iomem *base; 366 phys_addr_t phybase; 367 struct klist_node list_node; 368 struct device *dev; 369 struct spinlock ctx_lock; 370 struct hash_ctx *current_ctx; 371 bool power_state; 372 struct spinlock power_state_lock; 373 struct regulator *regulator; 374 struct clk *clk; 375 bool restore_dev_state; 376 struct hash_state state; /* Used for saving and resuming state */ 377 struct hash_dma dma; 378 }; 379 380 int hash_check_hw(struct hash_device_data *device_data); 381 382 int hash_setconfiguration(struct hash_device_data *device_data, 383 struct hash_config *config); 384 385 void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx); 386 387 void hash_get_digest(struct hash_device_data *device_data, 388 u8 *digest, int algorithm); 389 390 int hash_hw_update(struct ahash_request *req); 391 392 int hash_save_state(struct hash_device_data *device_data, 393 struct hash_state *state); 394 395 int hash_resume_state(struct hash_device_data *device_data, 396 const struct hash_state *state); 397 398 #endif 399
