1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Driver for 8250/16550-type serial ports
4 *
5 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
6 *
7 * Copyright (C) 2001 Russell King.
8 */
9
10 #include <linux/serial_8250.h>
11 #include <linux/serial_reg.h>
12 #include <linux/dmaengine.h>
13
14 #include "../serial_mctrl_gpio.h"
15
16 struct uart_8250_dma {
17 int (*tx_dma)(struct uart_8250_port *p);
18 int (*rx_dma)(struct uart_8250_port *p);
19
20 /* Filter function */
21 dma_filter_fn fn;
22 /* Parameter to the filter function */
23 void *rx_param;
24 void *tx_param;
25
26 struct dma_slave_config rxconf;
27 struct dma_slave_config txconf;
28
29 struct dma_chan *rxchan;
30 struct dma_chan *txchan;
31
32 /* Device address base for DMA operations */
33 phys_addr_t rx_dma_addr;
34 phys_addr_t tx_dma_addr;
35
36 /* DMA address of the buffer in memory */
37 dma_addr_t rx_addr;
38 dma_addr_t tx_addr;
39
40 dma_cookie_t rx_cookie;
41 dma_cookie_t tx_cookie;
42
43 void *rx_buf;
44
45 size_t rx_size;
46 size_t tx_size;
47
48 unsigned char tx_running;
49 unsigned char tx_err;
50 unsigned char rx_running;
51 };
52
53 struct old_serial_port {
54 unsigned int uart;
55 unsigned int baud_base;
56 unsigned int port;
57 unsigned int irq;
58 upf_t flags;
59 unsigned char io_type;
60 unsigned char __iomem *iomem_base;
61 unsigned short iomem_reg_shift;
62 };
63
64 struct serial8250_config {
65 const char *name;
66 unsigned short fifo_size;
67 unsigned short tx_loadsz;
68 unsigned char fcr;
69 unsigned char rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE];
70 unsigned int flags;
71 };
72
73 #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */
74 #define UART_CAP_EFR (1 << 9) /* UART has EFR */
75 #define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */
76 #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
77 #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
78 #define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */
79 #define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */
80 #define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */
81 #define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */
82 #define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks:
83 * STOP PARITY EPAR SPAR WLEN5 WLEN6
84 */
85
86 #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
87 #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
88 #define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
89 #define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */
90 #define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */
91
92
93 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
94 #define SERIAL8250_SHARE_IRQS 1
95 #else
96 #define SERIAL8250_SHARE_IRQS 0
97 #endif
98
99 #define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \
100 { \
101 .iobase = _base, \
102 .irq = _irq, \
103 .uartclk = 1843200, \
104 .iotype = UPIO_PORT, \
105 .flags = UPF_BOOT_AUTOCONF | (_flags), \
106 }
107
108 #define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0)
109
110
serial_in(struct uart_8250_port * up,int offset)111 static inline int serial_in(struct uart_8250_port *up, int offset)
112 {
113 return up->port.serial_in(&up->port, offset);
114 }
115
serial_out(struct uart_8250_port * up,int offset,int value)116 static inline void serial_out(struct uart_8250_port *up, int offset, int value)
117 {
118 up->port.serial_out(&up->port, offset, value);
119 }
120
121 void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p);
122
serial_dl_read(struct uart_8250_port * up)123 static inline int serial_dl_read(struct uart_8250_port *up)
124 {
125 return up->dl_read(up);
126 }
127
serial_dl_write(struct uart_8250_port * up,int value)128 static inline void serial_dl_write(struct uart_8250_port *up, int value)
129 {
130 up->dl_write(up, value);
131 }
132
serial8250_set_THRI(struct uart_8250_port * up)133 static inline bool serial8250_set_THRI(struct uart_8250_port *up)
134 {
135 if (up->ier & UART_IER_THRI)
136 return false;
137 up->ier |= UART_IER_THRI;
138 serial_out(up, UART_IER, up->ier);
139 return true;
140 }
141
serial8250_clear_THRI(struct uart_8250_port * up)142 static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
143 {
144 if (!(up->ier & UART_IER_THRI))
145 return false;
146 up->ier &= ~UART_IER_THRI;
147 serial_out(up, UART_IER, up->ier);
148 return true;
149 }
150
151 struct uart_8250_port *serial8250_get_port(int line);
152
153 void serial8250_rpm_get(struct uart_8250_port *p);
154 void serial8250_rpm_put(struct uart_8250_port *p);
155
156 void serial8250_rpm_get_tx(struct uart_8250_port *p);
157 void serial8250_rpm_put_tx(struct uart_8250_port *p);
158
159 int serial8250_em485_init(struct uart_8250_port *p);
160 void serial8250_em485_destroy(struct uart_8250_port *p);
161
162 /* MCR <-> TIOCM conversion */
serial8250_TIOCM_to_MCR(int tiocm)163 static inline int serial8250_TIOCM_to_MCR(int tiocm)
164 {
165 int mcr = 0;
166
167 if (tiocm & TIOCM_RTS)
168 mcr |= UART_MCR_RTS;
169 if (tiocm & TIOCM_DTR)
170 mcr |= UART_MCR_DTR;
171 if (tiocm & TIOCM_OUT1)
172 mcr |= UART_MCR_OUT1;
173 if (tiocm & TIOCM_OUT2)
174 mcr |= UART_MCR_OUT2;
175 if (tiocm & TIOCM_LOOP)
176 mcr |= UART_MCR_LOOP;
177
178 return mcr;
179 }
180
serial8250_MCR_to_TIOCM(int mcr)181 static inline int serial8250_MCR_to_TIOCM(int mcr)
182 {
183 int tiocm = 0;
184
185 if (mcr & UART_MCR_RTS)
186 tiocm |= TIOCM_RTS;
187 if (mcr & UART_MCR_DTR)
188 tiocm |= TIOCM_DTR;
189 if (mcr & UART_MCR_OUT1)
190 tiocm |= TIOCM_OUT1;
191 if (mcr & UART_MCR_OUT2)
192 tiocm |= TIOCM_OUT2;
193 if (mcr & UART_MCR_LOOP)
194 tiocm |= TIOCM_LOOP;
195
196 return tiocm;
197 }
198
199 /* MSR <-> TIOCM conversion */
serial8250_MSR_to_TIOCM(int msr)200 static inline int serial8250_MSR_to_TIOCM(int msr)
201 {
202 int tiocm = 0;
203
204 if (msr & UART_MSR_DCD)
205 tiocm |= TIOCM_CAR;
206 if (msr & UART_MSR_RI)
207 tiocm |= TIOCM_RNG;
208 if (msr & UART_MSR_DSR)
209 tiocm |= TIOCM_DSR;
210 if (msr & UART_MSR_CTS)
211 tiocm |= TIOCM_CTS;
212
213 return tiocm;
214 }
215
serial8250_out_MCR(struct uart_8250_port * up,int value)216 static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
217 {
218 serial_out(up, UART_MCR, value);
219
220 if (up->gpios)
221 mctrl_gpio_set(up->gpios, serial8250_MCR_to_TIOCM(value));
222 }
223
serial8250_in_MCR(struct uart_8250_port * up)224 static inline int serial8250_in_MCR(struct uart_8250_port *up)
225 {
226 int mctrl;
227
228 mctrl = serial_in(up, UART_MCR);
229
230 if (up->gpios) {
231 unsigned int mctrl_gpio = 0;
232
233 mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio);
234 mctrl |= serial8250_TIOCM_to_MCR(mctrl_gpio);
235 }
236
237 return mctrl;
238 }
239
240 #if defined(__alpha__) && !defined(CONFIG_PCI)
241 /*
242 * Digital did something really horribly wrong with the OUT1 and OUT2
243 * lines on at least some ALPHA's. The failure mode is that if either
244 * is cleared, the machine locks up with endless interrupts.
245 */
246 #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1)
247 #else
248 #define ALPHA_KLUDGE_MCR 0
249 #endif
250
251 #ifdef CONFIG_SERIAL_8250_PNP
252 int serial8250_pnp_init(void);
253 void serial8250_pnp_exit(void);
254 #else
serial8250_pnp_init(void)255 static inline int serial8250_pnp_init(void) { return 0; }
serial8250_pnp_exit(void)256 static inline void serial8250_pnp_exit(void) { }
257 #endif
258
259 #ifdef CONFIG_SERIAL_8250_FINTEK
260 int fintek_8250_probe(struct uart_8250_port *uart);
261 #else
fintek_8250_probe(struct uart_8250_port * uart)262 static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; }
263 #endif
264
265 #ifdef CONFIG_ARCH_OMAP1
is_omap1_8250(struct uart_8250_port * pt)266 static inline int is_omap1_8250(struct uart_8250_port *pt)
267 {
268 int res;
269
270 switch (pt->port.mapbase) {
271 case OMAP1_UART1_BASE:
272 case OMAP1_UART2_BASE:
273 case OMAP1_UART3_BASE:
274 res = 1;
275 break;
276 default:
277 res = 0;
278 break;
279 }
280
281 return res;
282 }
283
is_omap1510_8250(struct uart_8250_port * pt)284 static inline int is_omap1510_8250(struct uart_8250_port *pt)
285 {
286 if (!cpu_is_omap1510())
287 return 0;
288
289 return is_omap1_8250(pt);
290 }
291 #else
is_omap1_8250(struct uart_8250_port * pt)292 static inline int is_omap1_8250(struct uart_8250_port *pt)
293 {
294 return 0;
295 }
is_omap1510_8250(struct uart_8250_port * pt)296 static inline int is_omap1510_8250(struct uart_8250_port *pt)
297 {
298 return 0;
299 }
300 #endif
301
302 #ifdef CONFIG_SERIAL_8250_DMA
303 extern int serial8250_tx_dma(struct uart_8250_port *);
304 extern int serial8250_rx_dma(struct uart_8250_port *);
305 extern void serial8250_rx_dma_flush(struct uart_8250_port *);
306 extern int serial8250_request_dma(struct uart_8250_port *);
307 extern void serial8250_release_dma(struct uart_8250_port *);
308 #else
serial8250_tx_dma(struct uart_8250_port * p)309 static inline int serial8250_tx_dma(struct uart_8250_port *p)
310 {
311 return -1;
312 }
serial8250_rx_dma(struct uart_8250_port * p)313 static inline int serial8250_rx_dma(struct uart_8250_port *p)
314 {
315 return -1;
316 }
serial8250_rx_dma_flush(struct uart_8250_port * p)317 static inline void serial8250_rx_dma_flush(struct uart_8250_port *p) { }
serial8250_request_dma(struct uart_8250_port * p)318 static inline int serial8250_request_dma(struct uart_8250_port *p)
319 {
320 return -1;
321 }
serial8250_release_dma(struct uart_8250_port * p)322 static inline void serial8250_release_dma(struct uart_8250_port *p) { }
323 #endif
324
ns16550a_goto_highspeed(struct uart_8250_port * up)325 static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
326 {
327 unsigned char status;
328
329 status = serial_in(up, 0x04); /* EXCR2 */
330 #define PRESL(x) ((x) & 0x30)
331 if (PRESL(status) == 0x10) {
332 /* already in high speed mode */
333 return 0;
334 } else {
335 status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
336 status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
337 serial_out(up, 0x04, status);
338 }
339 return 1;
340 }
341
serial_index(struct uart_port * port)342 static inline int serial_index(struct uart_port *port)
343 {
344 return port->minor - 64;
345 }
346
