1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * QLogic Fibre Channel HBA Driver 4 * Copyright (c) 2003-2014 QLogic Corporation 5 */ 6 #ifndef __QLA_FW_H 7 #define __QLA_FW_H 8 9 #include <linux/nvme.h> 10 #include <linux/nvme-fc.h> 11 12 #include "qla_dsd.h" 13 14 #define MBS_CHECKSUM_ERROR 0x4010 15 #define MBS_INVALID_PRODUCT_KEY 0x4020 16 17 /* 18 * Firmware Options. 19 */ 20 #define FO1_ENABLE_PUREX BIT_10 21 #define FO1_DISABLE_LED_CTRL BIT_6 22 #define FO1_ENABLE_8016 BIT_0 23 #define FO2_ENABLE_SEL_CLASS2 BIT_5 24 #define FO3_NO_ABTS_ON_LINKDOWN BIT_14 25 #define FO3_HOLD_STS_IOCB BIT_12 26 27 /* 28 * Port Database structure definition for ISP 24xx. 29 */ 30 #define PDO_FORCE_ADISC BIT_1 31 #define PDO_FORCE_PLOGI BIT_0 32 33 struct buffer_credit_24xx { 34 u32 parameter[28]; 35 }; 36 37 #define PORT_DATABASE_24XX_SIZE 64 38 struct port_database_24xx { 39 uint16_t flags; 40 #define PDF_TASK_RETRY_ID BIT_14 41 #define PDF_FC_TAPE BIT_7 42 #define PDF_ACK0_CAPABLE BIT_6 43 #define PDF_FCP2_CONF BIT_5 44 #define PDF_CLASS_2 BIT_4 45 #define PDF_HARD_ADDR BIT_1 46 47 /* 48 * for NVMe, the login_state field has been 49 * split into nibbles. 50 * The lower nibble is for FCP. 51 * The upper nibble is for NVMe. 52 */ 53 uint8_t current_login_state; 54 uint8_t last_login_state; 55 #define PDS_PLOGI_PENDING 0x03 56 #define PDS_PLOGI_COMPLETE 0x04 57 #define PDS_PRLI_PENDING 0x05 58 #define PDS_PRLI_COMPLETE 0x06 59 #define PDS_PORT_UNAVAILABLE 0x07 60 #define PDS_PRLO_PENDING 0x09 61 #define PDS_LOGO_PENDING 0x11 62 #define PDS_PRLI2_PENDING 0x12 63 64 uint8_t hard_address[3]; 65 uint8_t reserved_1; 66 67 uint8_t port_id[3]; 68 uint8_t sequence_id; 69 70 uint16_t port_timer; 71 72 uint16_t nport_handle; /* N_PORT handle. */ 73 74 uint16_t receive_data_size; 75 uint16_t reserved_2; 76 77 uint8_t prli_svc_param_word_0[2]; /* Big endian */ 78 /* Bits 15-0 of word 0 */ 79 uint8_t prli_svc_param_word_3[2]; /* Big endian */ 80 /* Bits 15-0 of word 3 */ 81 82 uint8_t port_name[WWN_SIZE]; 83 uint8_t node_name[WWN_SIZE]; 84 85 uint8_t reserved_3[4]; 86 uint16_t prli_nvme_svc_param_word_0; /* Bits 15-0 of word 0 */ 87 uint16_t prli_nvme_svc_param_word_3; /* Bits 15-0 of word 3 */ 88 uint16_t nvme_first_burst_size; 89 uint8_t reserved_4[14]; 90 }; 91 92 /* 93 * MB 75h returns a list of DB entries similar to port_database_24xx(64B). 94 * However, in this case it returns 1st 40 bytes. 95 */ 96 struct get_name_list_extended { 97 __le16 flags; 98 u8 current_login_state; 99 u8 last_login_state; 100 u8 hard_address[3]; 101 u8 reserved_1; 102 u8 port_id[3]; 103 u8 sequence_id; 104 __le16 port_timer; 105 __le16 nport_handle; /* N_PORT handle. */ 106 __le16 receive_data_size; 107 __le16 reserved_2; 108 109 /* PRLI SVC Param are Big endian */ 110 u8 prli_svc_param_word_0[2]; /* Bits 15-0 of word 0 */ 111 u8 prli_svc_param_word_3[2]; /* Bits 15-0 of word 3 */ 112 u8 port_name[WWN_SIZE]; 113 u8 node_name[WWN_SIZE]; 114 }; 115 116 /* MB 75h: This is the short version of the database */ 117 struct get_name_list { 118 u8 port_node_name[WWN_SIZE]; /* B7 most sig, B0 least sig */ 119 __le16 nport_handle; 120 u8 reserved; 121 }; 122 123 struct vp_database_24xx { 124 uint16_t vp_status; 125 uint8_t options; 126 uint8_t id; 127 uint8_t port_name[WWN_SIZE]; 128 uint8_t node_name[WWN_SIZE]; 129 uint16_t port_id_low; 130 uint16_t port_id_high; 131 }; 132 133 struct nvram_24xx { 134 /* NVRAM header. */ 135 uint8_t id[4]; 136 __le16 nvram_version; 137 uint16_t reserved_0; 138 139 /* Firmware Initialization Control Block. */ 140 __le16 version; 141 uint16_t reserved_1; 142 __le16 frame_payload_size; 143 __le16 execution_throttle; 144 __le16 exchange_count; 145 __le16 hard_address; 146 147 uint8_t port_name[WWN_SIZE]; 148 uint8_t node_name[WWN_SIZE]; 149 150 __le16 login_retry_count; 151 __le16 link_down_on_nos; 152 __le16 interrupt_delay_timer; 153 __le16 login_timeout; 154 155 __le32 firmware_options_1; 156 __le32 firmware_options_2; 157 __le32 firmware_options_3; 158 159 /* Offset 56. */ 160 161 /* 162 * BIT 0 = Control Enable 163 * BIT 1-15 = 164 * 165 * BIT 0-7 = Reserved 166 * BIT 8-10 = Output Swing 1G 167 * BIT 11-13 = Output Emphasis 1G 168 * BIT 14-15 = Reserved 169 * 170 * BIT 0-7 = Reserved 171 * BIT 8-10 = Output Swing 2G 172 * BIT 11-13 = Output Emphasis 2G 173 * BIT 14-15 = Reserved 174 * 175 * BIT 0-7 = Reserved 176 * BIT 8-10 = Output Swing 4G 177 * BIT 11-13 = Output Emphasis 4G 178 * BIT 14-15 = Reserved 179 */ 180 __le16 seriallink_options[4]; 181 182 uint16_t reserved_2[16]; 183 184 /* Offset 96. */ 185 uint16_t reserved_3[16]; 186 187 /* PCIe table entries. */ 188 uint16_t reserved_4[16]; 189 190 /* Offset 160. */ 191 uint16_t reserved_5[16]; 192 193 /* Offset 192. */ 194 uint16_t reserved_6[16]; 195 196 /* Offset 224. */ 197 uint16_t reserved_7[16]; 198 199 /* 200 * BIT 0 = Enable spinup delay 201 * BIT 1 = Disable BIOS 202 * BIT 2 = Enable Memory Map BIOS 203 * BIT 3 = Enable Selectable Boot 204 * BIT 4 = Disable RISC code load 205 * BIT 5 = Disable Serdes 206 * BIT 6 = 207 * BIT 7 = 208 * 209 * BIT 8 = 210 * BIT 9 = 211 * BIT 10 = Enable lip full login 212 * BIT 11 = Enable target reset 213 * BIT 12 = 214 * BIT 13 = 215 * BIT 14 = 216 * BIT 15 = Enable alternate WWN 217 * 218 * BIT 16-31 = 219 */ 220 __le32 host_p; 221 222 uint8_t alternate_port_name[WWN_SIZE]; 223 uint8_t alternate_node_name[WWN_SIZE]; 224 225 uint8_t boot_port_name[WWN_SIZE]; 226 __le16 boot_lun_number; 227 uint16_t reserved_8; 228 229 uint8_t alt1_boot_port_name[WWN_SIZE]; 230 __le16 alt1_boot_lun_number; 231 uint16_t reserved_9; 232 233 uint8_t alt2_boot_port_name[WWN_SIZE]; 234 __le16 alt2_boot_lun_number; 235 uint16_t reserved_10; 236 237 uint8_t alt3_boot_port_name[WWN_SIZE]; 238 __le16 alt3_boot_lun_number; 239 uint16_t reserved_11; 240 241 /* 242 * BIT 0 = Selective Login 243 * BIT 1 = Alt-Boot Enable 244 * BIT 2 = Reserved 245 * BIT 3 = Boot Order List 246 * BIT 4 = Reserved 247 * BIT 5 = Selective LUN 248 * BIT 6 = Reserved 249 * BIT 7-31 = 250 */ 251 __le32 efi_parameters; 252 253 uint8_t reset_delay; 254 uint8_t reserved_12; 255 uint16_t reserved_13; 256 257 __le16 boot_id_number; 258 uint16_t reserved_14; 259 260 __le16 max_luns_per_target; 261 uint16_t reserved_15; 262 263 __le16 port_down_retry_count; 264 __le16 link_down_timeout; 265 266 /* FCode parameters. */ 267 __le16 fcode_parameter; 268 269 uint16_t reserved_16[3]; 270 271 /* Offset 352. */ 272 uint8_t prev_drv_ver_major; 273 uint8_t prev_drv_ver_submajob; 274 uint8_t prev_drv_ver_minor; 275 uint8_t prev_drv_ver_subminor; 276 277 __le16 prev_bios_ver_major; 278 __le16 prev_bios_ver_minor; 279 280 __le16 prev_efi_ver_major; 281 __le16 prev_efi_ver_minor; 282 283 __le16 prev_fw_ver_major; 284 uint8_t prev_fw_ver_minor; 285 uint8_t prev_fw_ver_subminor; 286 287 uint16_t reserved_17[8]; 288 289 /* Offset 384. */ 290 uint16_t reserved_18[16]; 291 292 /* Offset 416. */ 293 uint16_t reserved_19[16]; 294 295 /* Offset 448. */ 296 uint16_t reserved_20[16]; 297 298 /* Offset 480. */ 299 uint8_t model_name[16]; 300 301 uint16_t reserved_21[2]; 302 303 /* Offset 500. */ 304 /* HW Parameter Block. */ 305 uint16_t pcie_table_sig; 306 uint16_t pcie_table_offset; 307 308 uint16_t subsystem_vendor_id; 309 uint16_t subsystem_device_id; 310 311 __le32 checksum; 312 }; 313 314 /* 315 * ISP Initialization Control Block. 316 * Little endian except where noted. 317 */ 318 #define ICB_VERSION 1 319 struct init_cb_24xx { 320 __le16 version; 321 uint16_t reserved_1; 322 323 __le16 frame_payload_size; 324 __le16 execution_throttle; 325 __le16 exchange_count; 326 327 __le16 hard_address; 328 329 uint8_t port_name[WWN_SIZE]; /* Big endian. */ 330 uint8_t node_name[WWN_SIZE]; /* Big endian. */ 331 332 __le16 response_q_inpointer; 333 __le16 request_q_outpointer; 334 335 __le16 login_retry_count; 336 337 __le16 prio_request_q_outpointer; 338 339 __le16 response_q_length; 340 __le16 request_q_length; 341 342 __le16 link_down_on_nos; /* Milliseconds. */ 343 344 __le16 prio_request_q_length; 345 346 __le64 request_q_address __packed; 347 __le64 response_q_address __packed; 348 __le64 prio_request_q_address __packed; 349 350 __le16 msix; 351 __le16 msix_atio; 352 uint8_t reserved_2[4]; 353 354 __le16 atio_q_inpointer; 355 __le16 atio_q_length; 356 __le64 atio_q_address __packed; 357 358 __le16 interrupt_delay_timer; /* 100us increments. */ 359 __le16 login_timeout; 360 361 /* 362 * BIT 0 = Enable Hard Loop Id 363 * BIT 1 = Enable Fairness 364 * BIT 2 = Enable Full-Duplex 365 * BIT 3 = Reserved 366 * BIT 4 = Enable Target Mode 367 * BIT 5 = Disable Initiator Mode 368 * BIT 6 = Acquire FA-WWN 369 * BIT 7 = Enable D-port Diagnostics 370 * 371 * BIT 8 = Reserved 372 * BIT 9 = Non Participating LIP 373 * BIT 10 = Descending Loop ID Search 374 * BIT 11 = Acquire Loop ID in LIPA 375 * BIT 12 = Reserved 376 * BIT 13 = Full Login after LIP 377 * BIT 14 = Node Name Option 378 * BIT 15-31 = Reserved 379 */ 380 __le32 firmware_options_1; 381 382 /* 383 * BIT 0 = Operation Mode bit 0 384 * BIT 1 = Operation Mode bit 1 385 * BIT 2 = Operation Mode bit 2 386 * BIT 3 = Operation Mode bit 3 387 * BIT 4 = Connection Options bit 0 388 * BIT 5 = Connection Options bit 1 389 * BIT 6 = Connection Options bit 2 390 * BIT 7 = Enable Non part on LIHA failure 391 * 392 * BIT 8 = Enable Class 2 393 * BIT 9 = Enable ACK0 394 * BIT 10 = Reserved 395 * BIT 11 = Enable FC-SP Security 396 * BIT 12 = FC Tape Enable 397 * BIT 13 = Reserved 398 * BIT 14 = Enable Target PRLI Control 399 * BIT 15-31 = Reserved 400 */ 401 __le32 firmware_options_2; 402 403 /* 404 * BIT 0 = Reserved 405 * BIT 1 = Soft ID only 406 * BIT 2 = Reserved 407 * BIT 3 = Reserved 408 * BIT 4 = FCP RSP Payload bit 0 409 * BIT 5 = FCP RSP Payload bit 1 410 * BIT 6 = Enable Receive Out-of-Order data frame handling 411 * BIT 7 = Disable Automatic PLOGI on Local Loop 412 * 413 * BIT 8 = Reserved 414 * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling 415 * BIT 10 = Reserved 416 * BIT 11 = Reserved 417 * BIT 12 = Reserved 418 * BIT 13 = Data Rate bit 0 419 * BIT 14 = Data Rate bit 1 420 * BIT 15 = Data Rate bit 2 421 * BIT 16 = Enable 75 ohm Termination Select 422 * BIT 17-28 = Reserved 423 * BIT 29 = Enable response queue 0 in index shadowing 424 * BIT 30 = Enable request queue 0 out index shadowing 425 * BIT 31 = Reserved 426 */ 427 __le32 firmware_options_3; 428 __le16 qos; 429 __le16 rid; 430 uint8_t reserved_3[20]; 431 }; 432 433 /* 434 * ISP queue - command entry structure definition. 435 */ 436 #define COMMAND_BIDIRECTIONAL 0x75 437 struct cmd_bidir { 438 uint8_t entry_type; /* Entry type. */ 439 uint8_t entry_count; /* Entry count. */ 440 uint8_t sys_define; /* System defined */ 441 uint8_t entry_status; /* Entry status. */ 442 443 uint32_t handle; /* System handle. */ 444 445 __le16 nport_handle; /* N_PORT handle. */ 446 447 __le16 timeout; /* Command timeout. */ 448 449 __le16 wr_dseg_count; /* Write Data segment count. */ 450 __le16 rd_dseg_count; /* Read Data segment count. */ 451 452 struct scsi_lun lun; /* FCP LUN (BE). */ 453 454 __le16 control_flags; /* Control flags. */ 455 #define BD_WRAP_BACK BIT_3 456 #define BD_READ_DATA BIT_1 457 #define BD_WRITE_DATA BIT_0 458 459 __le16 fcp_cmnd_dseg_len; /* Data segment length. */ 460 __le64 fcp_cmnd_dseg_address __packed;/* Data segment address. */ 461 462 uint16_t reserved[2]; /* Reserved */ 463 464 __le32 rd_byte_count; /* Total Byte count Read. */ 465 __le32 wr_byte_count; /* Total Byte count write. */ 466 467 uint8_t port_id[3]; /* PortID of destination port.*/ 468 uint8_t vp_index; 469 470 struct dsd64 fcp_dsd; 471 }; 472 473 #define COMMAND_TYPE_6 0x48 /* Command Type 6 entry */ 474 struct cmd_type_6 { 475 uint8_t entry_type; /* Entry type. */ 476 uint8_t entry_count; /* Entry count. */ 477 uint8_t sys_define; /* System defined. */ 478 uint8_t entry_status; /* Entry Status. */ 479 480 uint32_t handle; /* System handle. */ 481 482 __le16 nport_handle; /* N_PORT handle. */ 483 __le16 timeout; /* Command timeout. */ 484 485 __le16 dseg_count; /* Data segment count. */ 486 487 __le16 fcp_rsp_dsd_len; /* FCP_RSP DSD length. */ 488 489 struct scsi_lun lun; /* FCP LUN (BE). */ 490 491 __le16 control_flags; /* Control flags. */ 492 #define CF_DIF_SEG_DESCR_ENABLE BIT_3 493 #define CF_DATA_SEG_DESCR_ENABLE BIT_2 494 #define CF_READ_DATA BIT_1 495 #define CF_WRITE_DATA BIT_0 496 497 __le16 fcp_cmnd_dseg_len; /* Data segment length. */ 498 /* Data segment address. */ 499 __le64 fcp_cmnd_dseg_address __packed; 500 /* Data segment address. */ 501 __le64 fcp_rsp_dseg_address __packed; 502 503 __le32 byte_count; /* Total byte count. */ 504 505 uint8_t port_id[3]; /* PortID of destination port. */ 506 uint8_t vp_index; 507 508 struct dsd64 fcp_dsd; 509 }; 510 511 #define COMMAND_TYPE_7 0x18 /* Command Type 7 entry */ 512 struct cmd_type_7 { 513 uint8_t entry_type; /* Entry type. */ 514 uint8_t entry_count; /* Entry count. */ 515 uint8_t sys_define; /* System defined. */ 516 uint8_t entry_status; /* Entry Status. */ 517 518 uint32_t handle; /* System handle. */ 519 520 __le16 nport_handle; /* N_PORT handle. */ 521 __le16 timeout; /* Command timeout. */ 522 #define FW_MAX_TIMEOUT 0x1999 523 524 __le16 dseg_count; /* Data segment count. */ 525 uint16_t reserved_1; 526 527 struct scsi_lun lun; /* FCP LUN (BE). */ 528 529 __le16 task_mgmt_flags; /* Task management flags. */ 530 #define TMF_CLEAR_ACA BIT_14 531 #define TMF_TARGET_RESET BIT_13 532 #define TMF_LUN_RESET BIT_12 533 #define TMF_CLEAR_TASK_SET BIT_10 534 #define TMF_ABORT_TASK_SET BIT_9 535 #define TMF_DSD_LIST_ENABLE BIT_2 536 #define TMF_READ_DATA BIT_1 537 #define TMF_WRITE_DATA BIT_0 538 539 uint8_t task; 540 #define TSK_SIMPLE 0 541 #define TSK_HEAD_OF_QUEUE 1 542 #define TSK_ORDERED 2 543 #define TSK_ACA 4 544 #define TSK_UNTAGGED 5 545 546 uint8_t crn; 547 548 uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */ 549 __le32 byte_count; /* Total byte count. */ 550 551 uint8_t port_id[3]; /* PortID of destination port. */ 552 uint8_t vp_index; 553 554 struct dsd64 dsd; 555 }; 556 557 #define COMMAND_TYPE_CRC_2 0x6A /* Command Type CRC_2 (Type 6) 558 * (T10-DIF) */ 559 struct cmd_type_crc_2 { 560 uint8_t entry_type; /* Entry type. */ 561 uint8_t entry_count; /* Entry count. */ 562 uint8_t sys_define; /* System defined. */ 563 uint8_t entry_status; /* Entry Status. */ 564 565 uint32_t handle; /* System handle. */ 566 567 __le16 nport_handle; /* N_PORT handle. */ 568 __le16 timeout; /* Command timeout. */ 569 570 __le16 dseg_count; /* Data segment count. */ 571 572 __le16 fcp_rsp_dseg_len; /* FCP_RSP DSD length. */ 573 574 struct scsi_lun lun; /* FCP LUN (BE). */ 575 576 __le16 control_flags; /* Control flags. */ 577 578 __le16 fcp_cmnd_dseg_len; /* Data segment length. */ 579 __le64 fcp_cmnd_dseg_address __packed; 580 /* Data segment address. */ 581 __le64 fcp_rsp_dseg_address __packed; 582 583 __le32 byte_count; /* Total byte count. */ 584 585 uint8_t port_id[3]; /* PortID of destination port. */ 586 uint8_t vp_index; 587 588 __le64 crc_context_address __packed; /* Data segment address. */ 589 __le16 crc_context_len; /* Data segment length. */ 590 uint16_t reserved_1; /* MUST be set to 0. */ 591 }; 592 593 594 /* 595 * ISP queue - status entry structure definition. 596 */ 597 #define STATUS_TYPE 0x03 /* Status entry. */ 598 struct sts_entry_24xx { 599 uint8_t entry_type; /* Entry type. */ 600 uint8_t entry_count; /* Entry count. */ 601 uint8_t sys_define; /* System defined. */ 602 uint8_t entry_status; /* Entry Status. */ 603 604 uint32_t handle; /* System handle. */ 605 606 __le16 comp_status; /* Completion status. */ 607 __le16 ox_id; /* OX_ID used by the firmware. */ 608 609 __le32 residual_len; /* FW calc residual transfer length. */ 610 611 union { 612 __le16 reserved_1; 613 __le16 nvme_rsp_pyld_len; 614 }; 615 616 __le16 state_flags; /* State flags. */ 617 #define SF_TRANSFERRED_DATA BIT_11 618 #define SF_NVME_ERSP BIT_6 619 #define SF_FCP_RSP_DMA BIT_0 620 621 __le16 status_qualifier; 622 __le16 scsi_status; /* SCSI status. */ 623 #define SS_CONFIRMATION_REQ BIT_12 624 625 __le32 rsp_residual_count; /* FCP RSP residual count. */ 626 627 __le32 sense_len; /* FCP SENSE length. */ 628 629 union { 630 struct { 631 __le32 rsp_data_len; /* FCP response data length */ 632 uint8_t data[28]; /* FCP rsp/sense information */ 633 }; 634 struct nvme_fc_ersp_iu nvme_ersp; 635 uint8_t nvme_ersp_data[32]; 636 }; 637 638 /* 639 * If DIF Error is set in comp_status, these additional fields are 640 * defined: 641 * 642 * !!! NOTE: Firmware sends expected/actual DIF data in big endian 643 * format; but all of the "data" field gets swab32-d in the beginning 644 * of qla2x00_status_entry(). 645 * 646 * &data[10] : uint8_t report_runt_bg[2]; - computed guard 647 * &data[12] : uint8_t actual_dif[8]; - DIF Data received 648 * &data[20] : uint8_t expected_dif[8]; - DIF Data computed 649 */ 650 }; 651 652 653 /* 654 * Status entry completion status 655 */ 656 #define CS_DATA_REASSEMBLY_ERROR 0x11 /* Data Reassembly Error.. */ 657 #define CS_ABTS_BY_TARGET 0x13 /* Target send ABTS to abort IOCB. */ 658 #define CS_FW_RESOURCE 0x2C /* Firmware Resource Unavailable. */ 659 #define CS_TASK_MGMT_OVERRUN 0x30 /* Task management overrun (8+). */ 660 #define CS_ABORT_BY_TARGET 0x47 /* Abort By Target. */ 661 662 /* 663 * ISP queue - marker entry structure definition. 664 */ 665 #define MARKER_TYPE 0x04 /* Marker entry. */ 666 struct mrk_entry_24xx { 667 uint8_t entry_type; /* Entry type. */ 668 uint8_t entry_count; /* Entry count. */ 669 uint8_t handle_count; /* Handle count. */ 670 uint8_t entry_status; /* Entry Status. */ 671 672 uint32_t handle; /* System handle. */ 673 674 __le16 nport_handle; /* N_PORT handle. */ 675 676 uint8_t modifier; /* Modifier (7-0). */ 677 #define MK_SYNC_ID_LUN 0 /* Synchronize ID/LUN */ 678 #define MK_SYNC_ID 1 /* Synchronize ID */ 679 #define MK_SYNC_ALL 2 /* Synchronize all ID/LUN */ 680 uint8_t reserved_1; 681 682 uint8_t reserved_2; 683 uint8_t vp_index; 684 685 uint16_t reserved_3; 686 687 uint8_t lun[8]; /* FCP LUN (BE). */ 688 uint8_t reserved_4[40]; 689 }; 690 691 /* 692 * ISP queue - CT Pass-Through entry structure definition. 693 */ 694 #define CT_IOCB_TYPE 0x29 /* CT Pass-Through IOCB entry */ 695 struct ct_entry_24xx { 696 uint8_t entry_type; /* Entry type. */ 697 uint8_t entry_count; /* Entry count. */ 698 uint8_t sys_define; /* System Defined. */ 699 uint8_t entry_status; /* Entry Status. */ 700 701 uint32_t handle; /* System handle. */ 702 703 __le16 comp_status; /* Completion status. */ 704 705 __le16 nport_handle; /* N_PORT handle. */ 706 707 __le16 cmd_dsd_count; 708 709 uint8_t vp_index; 710 uint8_t reserved_1; 711 712 __le16 timeout; /* Command timeout. */ 713 uint16_t reserved_2; 714 715 __le16 rsp_dsd_count; 716 717 uint8_t reserved_3[10]; 718 719 __le32 rsp_byte_count; 720 __le32 cmd_byte_count; 721 722 struct dsd64 dsd[2]; 723 }; 724 725 #define PURX_ELS_HEADER_SIZE 0x18 726 727 /* 728 * ISP queue - PUREX IOCB entry structure definition 729 */ 730 #define PUREX_IOCB_TYPE 0x51 /* CT Pass Through IOCB entry */ 731 struct purex_entry_24xx { 732 uint8_t entry_type; /* Entry type. */ 733 uint8_t entry_count; /* Entry count. */ 734 uint8_t sys_define; /* System defined. */ 735 uint8_t entry_status; /* Entry Status. */ 736 737 __le16 reserved1; 738 uint8_t vp_idx; 739 uint8_t reserved2; 740 741 __le16 status_flags; 742 __le16 nport_handle; 743 744 __le16 frame_size; 745 __le16 trunc_frame_size; 746 747 __le32 rx_xchg_addr; 748 749 uint8_t d_id[3]; 750 uint8_t r_ctl; 751 752 uint8_t s_id[3]; 753 uint8_t cs_ctl; 754 755 uint8_t f_ctl[3]; 756 uint8_t type; 757 758 __le16 seq_cnt; 759 uint8_t df_ctl; 760 uint8_t seq_id; 761 762 __le16 rx_id; 763 __le16 ox_id; 764 __le32 param; 765 766 uint8_t els_frame_payload[20]; 767 }; 768 769 /* 770 * ISP queue - ELS Pass-Through entry structure definition. 771 */ 772 #define ELS_IOCB_TYPE 0x53 /* ELS Pass-Through IOCB entry */ 773 struct els_entry_24xx { 774 uint8_t entry_type; /* Entry type. */ 775 uint8_t entry_count; /* Entry count. */ 776 uint8_t sys_define; /* System Defined. */ 777 uint8_t entry_status; /* Entry Status. */ 778 779 uint32_t handle; /* System handle. */ 780 781 __le16 comp_status; /* response only */ 782 __le16 nport_handle; 783 784 __le16 tx_dsd_count; 785 786 uint8_t vp_index; 787 uint8_t sof_type; 788 #define EST_SOFI3 (1 << 4) 789 #define EST_SOFI2 (3 << 4) 790 791 __le32 rx_xchg_address; /* Receive exchange address. */ 792 __le16 rx_dsd_count; 793 794 uint8_t opcode; 795 uint8_t reserved_2; 796 797 uint8_t d_id[3]; 798 uint8_t s_id[3]; 799 800 __le16 control_flags; /* Control flags. */ 801 #define ECF_PAYLOAD_DESCR_MASK (BIT_15|BIT_14|BIT_13) 802 #define EPD_ELS_COMMAND (0 << 13) 803 #define EPD_ELS_ACC (1 << 13) 804 #define EPD_ELS_RJT (2 << 13) 805 #define EPD_RX_XCHG (3 << 13) 806 #define ECF_CLR_PASSTHRU_PEND BIT_12 807 #define ECF_INCL_FRAME_HDR BIT_11 808 809 union { 810 struct { 811 __le32 rx_byte_count; 812 __le32 tx_byte_count; 813 814 __le64 tx_address __packed; /* DSD 0 address. */ 815 __le32 tx_len; /* DSD 0 length. */ 816 817 __le64 rx_address __packed; /* DSD 1 address. */ 818 __le32 rx_len; /* DSD 1 length. */ 819 }; 820 struct { 821 __le32 total_byte_count; 822 __le32 error_subcode_1; 823 __le32 error_subcode_2; 824 __le32 error_subcode_3; 825 }; 826 }; 827 }; 828 829 struct els_sts_entry_24xx { 830 uint8_t entry_type; /* Entry type. */ 831 uint8_t entry_count; /* Entry count. */ 832 uint8_t sys_define; /* System Defined. */ 833 uint8_t entry_status; /* Entry Status. */ 834 835 __le32 handle; /* System handle. */ 836 837 __le16 comp_status; 838 839 __le16 nport_handle; /* N_PORT handle. */ 840 841 __le16 reserved_1; 842 843 uint8_t vp_index; 844 uint8_t sof_type; 845 846 __le32 rx_xchg_address; /* Receive exchange address. */ 847 __le16 reserved_2; 848 849 uint8_t opcode; 850 uint8_t reserved_3; 851 852 uint8_t d_id[3]; 853 uint8_t s_id[3]; 854 855 __le16 control_flags; /* Control flags. */ 856 __le32 total_byte_count; 857 __le32 error_subcode_1; 858 __le32 error_subcode_2; 859 __le32 error_subcode_3; 860 861 __le32 reserved_4[4]; 862 }; 863 /* 864 * ISP queue - Mailbox Command entry structure definition. 865 */ 866 #define MBX_IOCB_TYPE 0x39 867 struct mbx_entry_24xx { 868 uint8_t entry_type; /* Entry type. */ 869 uint8_t entry_count; /* Entry count. */ 870 uint8_t handle_count; /* Handle count. */ 871 uint8_t entry_status; /* Entry Status. */ 872 873 uint32_t handle; /* System handle. */ 874 875 uint16_t mbx[28]; 876 }; 877 878 879 #define LOGINOUT_PORT_IOCB_TYPE 0x52 /* Login/Logout Port entry. */ 880 struct logio_entry_24xx { 881 uint8_t entry_type; /* Entry type. */ 882 uint8_t entry_count; /* Entry count. */ 883 uint8_t sys_define; /* System defined. */ 884 uint8_t entry_status; /* Entry Status. */ 885 886 uint32_t handle; /* System handle. */ 887 888 __le16 comp_status; /* Completion status. */ 889 #define CS_LOGIO_ERROR 0x31 /* Login/Logout IOCB error. */ 890 891 __le16 nport_handle; /* N_PORT handle. */ 892 893 __le16 control_flags; /* Control flags. */ 894 /* Modifiers. */ 895 #define LCF_INCLUDE_SNS BIT_10 /* Include SNS (FFFFFC) during LOGO. */ 896 #define LCF_FCP2_OVERRIDE BIT_9 /* Set/Reset word 3 of PRLI. */ 897 #define LCF_CLASS_2 BIT_8 /* Enable class 2 during PLOGI. */ 898 #define LCF_FREE_NPORT BIT_7 /* Release NPORT handle after LOGO. */ 899 #define LCF_EXPL_LOGO BIT_6 /* Perform an explicit LOGO. */ 900 #define LCF_NVME_PRLI BIT_6 /* Perform NVME FC4 PRLI */ 901 #define LCF_SKIP_PRLI BIT_5 /* Skip PRLI after PLOGI. */ 902 #define LCF_IMPL_LOGO_ALL BIT_5 /* Implicit LOGO to all ports. */ 903 #define LCF_COND_PLOGI BIT_4 /* PLOGI only if not logged-in. */ 904 #define LCF_IMPL_LOGO BIT_4 /* Perform an implicit LOGO. */ 905 #define LCF_IMPL_PRLO BIT_4 /* Perform an implicit PRLO. */ 906 /* Commands. */ 907 #define LCF_COMMAND_PLOGI 0x00 /* PLOGI. */ 908 #define LCF_COMMAND_PRLI 0x01 /* PRLI. */ 909 #define LCF_COMMAND_PDISC 0x02 /* PDISC. */ 910 #define LCF_COMMAND_ADISC 0x03 /* ADISC. */ 911 #define LCF_COMMAND_LOGO 0x08 /* LOGO. */ 912 #define LCF_COMMAND_PRLO 0x09 /* PRLO. */ 913 #define LCF_COMMAND_TPRLO 0x0A /* TPRLO. */ 914 915 uint8_t vp_index; 916 uint8_t reserved_1; 917 918 uint8_t port_id[3]; /* PortID of destination port. */ 919 920 uint8_t rsp_size; /* Response size in 32bit words. */ 921 922 __le32 io_parameter[11]; /* General I/O parameters. */ 923 #define LSC_SCODE_NOLINK 0x01 924 #define LSC_SCODE_NOIOCB 0x02 925 #define LSC_SCODE_NOXCB 0x03 926 #define LSC_SCODE_CMD_FAILED 0x04 927 #define LSC_SCODE_NOFABRIC 0x05 928 #define LSC_SCODE_FW_NOT_READY 0x07 929 #define LSC_SCODE_NOT_LOGGED_IN 0x09 930 #define LSC_SCODE_NOPCB 0x0A 931 932 #define LSC_SCODE_ELS_REJECT 0x18 933 #define LSC_SCODE_CMD_PARAM_ERR 0x19 934 #define LSC_SCODE_PORTID_USED 0x1A 935 #define LSC_SCODE_NPORT_USED 0x1B 936 #define LSC_SCODE_NONPORT 0x1C 937 #define LSC_SCODE_LOGGED_IN 0x1D 938 #define LSC_SCODE_NOFLOGI_ACC 0x1F 939 }; 940 941 #define TSK_MGMT_IOCB_TYPE 0x14 942 struct tsk_mgmt_entry { 943 uint8_t entry_type; /* Entry type. */ 944 uint8_t entry_count; /* Entry count. */ 945 uint8_t handle_count; /* Handle count. */ 946 uint8_t entry_status; /* Entry Status. */ 947 948 uint32_t handle; /* System handle. */ 949 950 __le16 nport_handle; /* N_PORT handle. */ 951 952 uint16_t reserved_1; 953 954 __le16 delay; /* Activity delay in seconds. */ 955 956 __le16 timeout; /* Command timeout. */ 957 958 struct scsi_lun lun; /* FCP LUN (BE). */ 959 960 __le32 control_flags; /* Control Flags. */ 961 #define TCF_NOTMCMD_TO_TARGET BIT_31 962 #define TCF_LUN_RESET BIT_4 963 #define TCF_ABORT_TASK_SET BIT_3 964 #define TCF_CLEAR_TASK_SET BIT_2 965 #define TCF_TARGET_RESET BIT_1 966 #define TCF_CLEAR_ACA BIT_0 967 968 uint8_t reserved_2[20]; 969 970 uint8_t port_id[3]; /* PortID of destination port. */ 971 uint8_t vp_index; 972 973 uint8_t reserved_3[12]; 974 }; 975 976 #define ABORT_IOCB_TYPE 0x33 977 struct abort_entry_24xx { 978 uint8_t entry_type; /* Entry type. */ 979 uint8_t entry_count; /* Entry count. */ 980 uint8_t handle_count; /* Handle count. */ 981 uint8_t entry_status; /* Entry Status. */ 982 983 uint32_t handle; /* System handle. */ 984 985 __le16 nport_handle; /* N_PORT handle. */ 986 /* or Completion status. */ 987 988 __le16 options; /* Options. */ 989 #define AOF_NO_ABTS BIT_0 /* Do not send any ABTS. */ 990 991 uint32_t handle_to_abort; /* System handle to abort. */ 992 993 __le16 req_que_no; 994 uint8_t reserved_1[30]; 995 996 uint8_t port_id[3]; /* PortID of destination port. */ 997 uint8_t vp_index; 998 999 uint8_t reserved_2[12]; 1000 }; 1001 1002 #define ABTS_RCV_TYPE 0x54 1003 #define ABTS_RSP_TYPE 0x55 1004 struct abts_entry_24xx { 1005 uint8_t entry_type; 1006 uint8_t entry_count; 1007 uint8_t handle_count; 1008 uint8_t entry_status; 1009 1010 __le32 handle; /* type 0x55 only */ 1011 1012 __le16 comp_status; /* type 0x55 only */ 1013 __le16 nport_handle; /* type 0x54 only */ 1014 1015 __le16 control_flags; /* type 0x55 only */ 1016 uint8_t vp_idx; 1017 uint8_t sof_type; /* sof_type is upper nibble */ 1018 1019 __le32 rx_xch_addr; 1020 1021 uint8_t d_id[3]; 1022 uint8_t r_ctl; 1023 1024 uint8_t s_id[3]; 1025 uint8_t cs_ctl; 1026 1027 uint8_t f_ctl[3]; 1028 uint8_t type; 1029 1030 __le16 seq_cnt; 1031 uint8_t df_ctl; 1032 uint8_t seq_id; 1033 1034 __le16 rx_id; 1035 __le16 ox_id; 1036 1037 __le32 param; 1038 1039 union { 1040 struct { 1041 __le32 subcode3; 1042 __le32 rsvd; 1043 __le32 subcode1; 1044 __le32 subcode2; 1045 } error; 1046 struct { 1047 __le16 rsrvd1; 1048 uint8_t last_seq_id; 1049 uint8_t seq_id_valid; 1050 __le16 aborted_rx_id; 1051 __le16 aborted_ox_id; 1052 __le16 high_seq_cnt; 1053 __le16 low_seq_cnt; 1054 } ba_acc; 1055 struct { 1056 uint8_t vendor_unique; 1057 uint8_t explanation; 1058 uint8_t reason; 1059 } ba_rjt; 1060 } payload; 1061 1062 __le32 rx_xch_addr_to_abort; 1063 } __packed; 1064 1065 /* ABTS payload explanation values */ 1066 #define BA_RJT_EXP_NO_ADDITIONAL 0 1067 #define BA_RJT_EXP_INV_OX_RX_ID 3 1068 #define BA_RJT_EXP_SEQ_ABORTED 5 1069 1070 /* ABTS payload reason values */ 1071 #define BA_RJT_RSN_INV_CMD_CODE 1 1072 #define BA_RJT_RSN_LOGICAL_ERROR 3 1073 #define BA_RJT_RSN_LOGICAL_BUSY 5 1074 #define BA_RJT_RSN_PROTOCOL_ERROR 7 1075 #define BA_RJT_RSN_UNABLE_TO_PERFORM 9 1076 #define BA_RJT_RSN_VENDOR_SPECIFIC 0xff 1077 1078 /* FC_F values */ 1079 #define FC_TYPE_BLD 0x000 /* Basic link data */ 1080 #define FC_F_CTL_RSP_CNTXT 0x800000 /* Responder of exchange */ 1081 #define FC_F_CTL_LAST_SEQ 0x100000 /* Last sequence */ 1082 #define FC_F_CTL_END_SEQ 0x80000 /* Last sequence */ 1083 #define FC_F_CTL_SEQ_INIT 0x010000 /* Sequence initiative */ 1084 #define FC_ROUTING_BLD 0x80 /* Basic link data frame */ 1085 #define FC_R_CTL_BLD_BA_ACC 0x04 /* BA_ACC (basic accept) */ 1086 1087 /* 1088 * ISP I/O Register Set structure definitions. 1089 */ 1090 struct device_reg_24xx { 1091 __le32 flash_addr; /* Flash/NVRAM BIOS address. */ 1092 #define FARX_DATA_FLAG BIT_31 1093 #define FARX_ACCESS_FLASH_CONF 0x7FFD0000 1094 #define FARX_ACCESS_FLASH_DATA 0x7FF00000 1095 #define FARX_ACCESS_NVRAM_CONF 0x7FFF0000 1096 #define FARX_ACCESS_NVRAM_DATA 0x7FFE0000 1097 1098 #define FA_NVRAM_FUNC0_ADDR 0x80 1099 #define FA_NVRAM_FUNC1_ADDR 0x180 1100 1101 #define FA_NVRAM_VPD_SIZE 0x200 1102 #define FA_NVRAM_VPD0_ADDR 0x00 1103 #define FA_NVRAM_VPD1_ADDR 0x100 1104 1105 #define FA_BOOT_CODE_ADDR 0x00000 1106 /* 1107 * RISC code begins at offset 512KB 1108 * within flash. Consisting of two 1109 * contiguous RISC code segments. 1110 */ 1111 #define FA_RISC_CODE_ADDR 0x20000 1112 #define FA_RISC_CODE_SEGMENTS 2 1113 1114 #define FA_FLASH_DESCR_ADDR_24 0x11000 1115 #define FA_FLASH_LAYOUT_ADDR_24 0x11400 1116 #define FA_NPIV_CONF0_ADDR_24 0x16000 1117 #define FA_NPIV_CONF1_ADDR_24 0x17000 1118 1119 #define FA_FW_AREA_ADDR 0x40000 1120 #define FA_VPD_NVRAM_ADDR 0x48000 1121 #define FA_FEATURE_ADDR 0x4C000 1122 #define FA_FLASH_DESCR_ADDR 0x50000 1123 #define FA_FLASH_LAYOUT_ADDR 0x50400 1124 #define FA_HW_EVENT0_ADDR 0x54000 1125 #define FA_HW_EVENT1_ADDR 0x54400 1126 #define FA_HW_EVENT_SIZE 0x200 1127 #define FA_HW_EVENT_ENTRY_SIZE 4 1128 #define FA_NPIV_CONF0_ADDR 0x5C000 1129 #define FA_NPIV_CONF1_ADDR 0x5D000 1130 #define FA_FCP_PRIO0_ADDR 0x10000 1131 #define FA_FCP_PRIO1_ADDR 0x12000 1132 1133 /* 1134 * Flash Error Log Event Codes. 1135 */ 1136 #define HW_EVENT_RESET_ERR 0xF00B 1137 #define HW_EVENT_ISP_ERR 0xF020 1138 #define HW_EVENT_PARITY_ERR 0xF022 1139 #define HW_EVENT_NVRAM_CHKSUM_ERR 0xF023 1140 #define HW_EVENT_FLASH_FW_ERR 0xF024 1141 1142 __le32 flash_data; /* Flash/NVRAM BIOS data. */ 1143 1144 __le32 ctrl_status; /* Control/Status. */ 1145 #define CSRX_FLASH_ACCESS_ERROR BIT_18 /* Flash/NVRAM Access Error. */ 1146 #define CSRX_DMA_ACTIVE BIT_17 /* DMA Active status. */ 1147 #define CSRX_DMA_SHUTDOWN BIT_16 /* DMA Shutdown control status. */ 1148 #define CSRX_FUNCTION BIT_15 /* Function number. */ 1149 /* PCI-X Bus Mode. */ 1150 #define CSRX_PCIX_BUS_MODE_MASK (BIT_11|BIT_10|BIT_9|BIT_8) 1151 #define PBM_PCI_33MHZ (0 << 8) 1152 #define PBM_PCIX_M1_66MHZ (1 << 8) 1153 #define PBM_PCIX_M1_100MHZ (2 << 8) 1154 #define PBM_PCIX_M1_133MHZ (3 << 8) 1155 #define PBM_PCIX_M2_66MHZ (5 << 8) 1156 #define PBM_PCIX_M2_100MHZ (6 << 8) 1157 #define PBM_PCIX_M2_133MHZ (7 << 8) 1158 #define PBM_PCI_66MHZ (8 << 8) 1159 /* Max Write Burst byte count. */ 1160 #define CSRX_MAX_WRT_BURST_MASK (BIT_5|BIT_4) 1161 #define MWB_512_BYTES (0 << 4) 1162 #define MWB_1024_BYTES (1 << 4) 1163 #define MWB_2048_BYTES (2 << 4) 1164 #define MWB_4096_BYTES (3 << 4) 1165 1166 #define CSRX_64BIT_SLOT BIT_2 /* PCI 64-Bit Bus Slot. */ 1167 #define CSRX_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable. */ 1168 #define CSRX_ISP_SOFT_RESET BIT_0 /* ISP soft reset. */ 1169 1170 __le32 ictrl; /* Interrupt control. */ 1171 #define ICRX_EN_RISC_INT BIT_3 /* Enable RISC interrupts on PCI. */ 1172 1173 __le32 istatus; /* Interrupt status. */ 1174 #define ISRX_RISC_INT BIT_3 /* RISC interrupt. */ 1175 1176 __le32 unused_1[2]; /* Gap. */ 1177 1178 /* Request Queue. */ 1179 __le32 req_q_in; /* In-Pointer. */ 1180 __le32 req_q_out; /* Out-Pointer. */ 1181 /* Response Queue. */ 1182 __le32 rsp_q_in; /* In-Pointer. */ 1183 __le32 rsp_q_out; /* Out-Pointer. */ 1184 /* Priority Request Queue. */ 1185 __le32 preq_q_in; /* In-Pointer. */ 1186 __le32 preq_q_out; /* Out-Pointer. */ 1187 1188 __le32 unused_2[2]; /* Gap. */ 1189 1190 /* ATIO Queue. */ 1191 __le32 atio_q_in; /* In-Pointer. */ 1192 __le32 atio_q_out; /* Out-Pointer. */ 1193 1194 __le32 host_status; 1195 #define HSRX_RISC_INT BIT_15 /* RISC to Host interrupt. */ 1196 #define HSRX_RISC_PAUSED BIT_8 /* RISC Paused. */ 1197 1198 __le32 hccr; /* Host command & control register. */ 1199 /* HCCR statuses. */ 1200 #define HCCRX_HOST_INT BIT_6 /* Host to RISC interrupt bit. */ 1201 #define HCCRX_RISC_RESET BIT_5 /* RISC Reset mode bit. */ 1202 /* HCCR commands. */ 1203 /* NOOP. */ 1204 #define HCCRX_NOOP 0x00000000 1205 /* Set RISC Reset. */ 1206 #define HCCRX_SET_RISC_RESET 0x10000000 1207 /* Clear RISC Reset. */ 1208 #define HCCRX_CLR_RISC_RESET 0x20000000 1209 /* Set RISC Pause. */ 1210 #define HCCRX_SET_RISC_PAUSE 0x30000000 1211 /* Releases RISC Pause. */ 1212 #define HCCRX_REL_RISC_PAUSE 0x40000000 1213 /* Set HOST to RISC interrupt. */ 1214 #define HCCRX_SET_HOST_INT 0x50000000 1215 /* Clear HOST to RISC interrupt. */ 1216 #define HCCRX_CLR_HOST_INT 0x60000000 1217 /* Clear RISC to PCI interrupt. */ 1218 #define HCCRX_CLR_RISC_INT 0xA0000000 1219 1220 __le32 gpiod; /* GPIO Data register. */ 1221 1222 /* LED update mask. */ 1223 #define GPDX_LED_UPDATE_MASK (BIT_20|BIT_19|BIT_18) 1224 /* Data update mask. */ 1225 #define GPDX_DATA_UPDATE_MASK (BIT_17|BIT_16) 1226 /* Data update mask. */ 1227 #define GPDX_DATA_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) 1228 /* LED control mask. */ 1229 #define GPDX_LED_COLOR_MASK (BIT_4|BIT_3|BIT_2) 1230 /* LED bit values. Color names as 1231 * referenced in fw spec. 1232 */ 1233 #define GPDX_LED_YELLOW_ON BIT_2 1234 #define GPDX_LED_GREEN_ON BIT_3 1235 #define GPDX_LED_AMBER_ON BIT_4 1236 /* Data in/out. */ 1237 #define GPDX_DATA_INOUT (BIT_1|BIT_0) 1238 1239 __le32 gpioe; /* GPIO Enable register. */ 1240 /* Enable update mask. */ 1241 #define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16) 1242 /* Enable update mask. */ 1243 #define GPEX_ENABLE_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) 1244 /* Enable. */ 1245 #define GPEX_ENABLE (BIT_1|BIT_0) 1246 1247 __le32 iobase_addr; /* I/O Bus Base Address register. */ 1248 1249 __le32 unused_3[10]; /* Gap. */ 1250 1251 __le16 mailbox0; 1252 __le16 mailbox1; 1253 __le16 mailbox2; 1254 __le16 mailbox3; 1255 __le16 mailbox4; 1256 __le16 mailbox5; 1257 __le16 mailbox6; 1258 __le16 mailbox7; 1259 __le16 mailbox8; 1260 __le16 mailbox9; 1261 __le16 mailbox10; 1262 __le16 mailbox11; 1263 __le16 mailbox12; 1264 __le16 mailbox13; 1265 __le16 mailbox14; 1266 __le16 mailbox15; 1267 __le16 mailbox16; 1268 __le16 mailbox17; 1269 __le16 mailbox18; 1270 __le16 mailbox19; 1271 __le16 mailbox20; 1272 __le16 mailbox21; 1273 __le16 mailbox22; 1274 __le16 mailbox23; 1275 __le16 mailbox24; 1276 __le16 mailbox25; 1277 __le16 mailbox26; 1278 __le16 mailbox27; 1279 __le16 mailbox28; 1280 __le16 mailbox29; 1281 __le16 mailbox30; 1282 __le16 mailbox31; 1283 1284 __le32 iobase_window; 1285 __le32 iobase_c4; 1286 __le32 iobase_c8; 1287 __le32 unused_4_1[6]; /* Gap. */ 1288 __le32 iobase_q; 1289 __le32 unused_5[2]; /* Gap. */ 1290 __le32 iobase_select; 1291 __le32 unused_6[2]; /* Gap. */ 1292 __le32 iobase_sdata; 1293 }; 1294 /* RISC-RISC semaphore register PCI offet */ 1295 #define RISC_REGISTER_BASE_OFFSET 0x7010 1296 #define RISC_REGISTER_WINDOW_OFFSET 0x6 1297 1298 /* RISC-RISC semaphore/flag register (risc address 0x7016) */ 1299 1300 #define RISC_SEMAPHORE 0x1UL 1301 #define RISC_SEMAPHORE_WE (RISC_SEMAPHORE << 16) 1302 #define RISC_SEMAPHORE_CLR (RISC_SEMAPHORE_WE | 0x0UL) 1303 #define RISC_SEMAPHORE_SET (RISC_SEMAPHORE_WE | RISC_SEMAPHORE) 1304 1305 #define RISC_SEMAPHORE_FORCE 0x8000UL 1306 #define RISC_SEMAPHORE_FORCE_WE (RISC_SEMAPHORE_FORCE << 16) 1307 #define RISC_SEMAPHORE_FORCE_CLR (RISC_SEMAPHORE_FORCE_WE | 0x0UL) 1308 #define RISC_SEMAPHORE_FORCE_SET \ 1309 (RISC_SEMAPHORE_FORCE_WE | RISC_SEMAPHORE_FORCE) 1310 1311 /* RISC semaphore timeouts (ms) */ 1312 #define TIMEOUT_SEMAPHORE 2500 1313 #define TIMEOUT_SEMAPHORE_FORCE 2000 1314 #define TIMEOUT_TOTAL_ELAPSED 4500 1315 1316 /* Trace Control *************************************************************/ 1317 1318 #define TC_AEN_DISABLE 0 1319 1320 #define TC_EFT_ENABLE 4 1321 #define TC_EFT_DISABLE 5 1322 1323 #define TC_FCE_ENABLE 8 1324 #define TC_FCE_OPTIONS 0 1325 #define TC_FCE_DEFAULT_RX_SIZE 2112 1326 #define TC_FCE_DEFAULT_TX_SIZE 2112 1327 #define TC_FCE_DISABLE 9 1328 #define TC_FCE_DISABLE_TRACE BIT_0 1329 1330 /* MID Support ***************************************************************/ 1331 1332 #define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */ 1333 #define MAX_MULTI_ID_FABRIC 256 /* ... */ 1334 1335 struct mid_conf_entry_24xx { 1336 uint16_t reserved_1; 1337 1338 /* 1339 * BIT 0 = Enable Hard Loop Id 1340 * BIT 1 = Acquire Loop ID in LIPA 1341 * BIT 2 = ID not Acquired 1342 * BIT 3 = Enable VP 1343 * BIT 4 = Enable Initiator Mode 1344 * BIT 5 = Disable Target Mode 1345 * BIT 6-7 = Reserved 1346 */ 1347 uint8_t options; 1348 1349 uint8_t hard_address; 1350 1351 uint8_t port_name[WWN_SIZE]; 1352 uint8_t node_name[WWN_SIZE]; 1353 }; 1354 1355 struct mid_init_cb_24xx { 1356 struct init_cb_24xx init_cb; 1357 1358 __le16 count; 1359 __le16 options; 1360 1361 struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC]; 1362 }; 1363 1364 1365 struct mid_db_entry_24xx { 1366 uint16_t status; 1367 #define MDBS_NON_PARTIC BIT_3 1368 #define MDBS_ID_ACQUIRED BIT_1 1369 #define MDBS_ENABLED BIT_0 1370 1371 uint8_t options; 1372 uint8_t hard_address; 1373 1374 uint8_t port_name[WWN_SIZE]; 1375 uint8_t node_name[WWN_SIZE]; 1376 1377 uint8_t port_id[3]; 1378 uint8_t reserved_1; 1379 }; 1380 1381 /* 1382 * Virtual Port Control IOCB 1383 */ 1384 #define VP_CTRL_IOCB_TYPE 0x30 /* Virtual Port Control entry. */ 1385 struct vp_ctrl_entry_24xx { 1386 uint8_t entry_type; /* Entry type. */ 1387 uint8_t entry_count; /* Entry count. */ 1388 uint8_t sys_define; /* System defined. */ 1389 uint8_t entry_status; /* Entry Status. */ 1390 1391 uint32_t handle; /* System handle. */ 1392 1393 __le16 vp_idx_failed; 1394 1395 __le16 comp_status; /* Completion status. */ 1396 #define CS_VCE_IOCB_ERROR 0x01 /* Error processing IOCB */ 1397 #define CS_VCE_ACQ_ID_ERROR 0x02 /* Error while acquireing ID. */ 1398 #define CS_VCE_BUSY 0x05 /* Firmware not ready to accept cmd. */ 1399 1400 __le16 command; 1401 #define VCE_COMMAND_ENABLE_VPS 0x00 /* Enable VPs. */ 1402 #define VCE_COMMAND_DISABLE_VPS 0x08 /* Disable VPs. */ 1403 #define VCE_COMMAND_DISABLE_VPS_REINIT 0x09 /* Disable VPs and reinit link. */ 1404 #define VCE_COMMAND_DISABLE_VPS_LOGO 0x0a /* Disable VPs and LOGO ports. */ 1405 #define VCE_COMMAND_DISABLE_VPS_LOGO_ALL 0x0b /* Disable VPs and LOGO ports. */ 1406 1407 __le16 vp_count; 1408 1409 uint8_t vp_idx_map[16]; 1410 __le16 flags; 1411 __le16 id; 1412 uint16_t reserved_4; 1413 __le16 hopct; 1414 uint8_t reserved_5[24]; 1415 }; 1416 1417 /* 1418 * Modify Virtual Port Configuration IOCB 1419 */ 1420 #define VP_CONFIG_IOCB_TYPE 0x31 /* Virtual Port Config entry. */ 1421 struct vp_config_entry_24xx { 1422 uint8_t entry_type; /* Entry type. */ 1423 uint8_t entry_count; /* Entry count. */ 1424 uint8_t handle_count; 1425 uint8_t entry_status; /* Entry Status. */ 1426 1427 uint32_t handle; /* System handle. */ 1428 1429 __le16 flags; 1430 #define CS_VF_BIND_VPORTS_TO_VF BIT_0 1431 #define CS_VF_SET_QOS_OF_VPORTS BIT_1 1432 #define CS_VF_SET_HOPS_OF_VPORTS BIT_2 1433 1434 __le16 comp_status; /* Completion status. */ 1435 #define CS_VCT_STS_ERROR 0x01 /* Specified VPs were not disabled. */ 1436 #define CS_VCT_CNT_ERROR 0x02 /* Invalid VP count. */ 1437 #define CS_VCT_ERROR 0x03 /* Unknown error. */ 1438 #define CS_VCT_IDX_ERROR 0x02 /* Invalid VP index. */ 1439 #define CS_VCT_BUSY 0x05 /* Firmware not ready to accept cmd. */ 1440 1441 uint8_t command; 1442 #define VCT_COMMAND_MOD_VPS 0x00 /* Modify VP configurations. */ 1443 #define VCT_COMMAND_MOD_ENABLE_VPS 0x01 /* Modify configuration & enable VPs. */ 1444 1445 uint8_t vp_count; 1446 1447 uint8_t vp_index1; 1448 uint8_t vp_index2; 1449 1450 uint8_t options_idx1; 1451 uint8_t hard_address_idx1; 1452 uint16_t reserved_vp1; 1453 uint8_t port_name_idx1[WWN_SIZE]; 1454 uint8_t node_name_idx1[WWN_SIZE]; 1455 1456 uint8_t options_idx2; 1457 uint8_t hard_address_idx2; 1458 uint16_t reserved_vp2; 1459 uint8_t port_name_idx2[WWN_SIZE]; 1460 uint8_t node_name_idx2[WWN_SIZE]; 1461 __le16 id; 1462 uint16_t reserved_4; 1463 __le16 hopct; 1464 uint8_t reserved_5[2]; 1465 }; 1466 1467 #define VP_RPT_ID_IOCB_TYPE 0x32 /* Report ID Acquisition entry. */ 1468 enum VP_STATUS { 1469 VP_STAT_COMPL, 1470 VP_STAT_FAIL, 1471 VP_STAT_ID_CHG, 1472 VP_STAT_SNS_TO, /* timeout */ 1473 VP_STAT_SNS_RJT, 1474 VP_STAT_SCR_TO, /* timeout */ 1475 VP_STAT_SCR_RJT, 1476 }; 1477 1478 enum VP_FLAGS { 1479 VP_FLAGS_CON_FLOOP = 1, 1480 VP_FLAGS_CON_P2P = 2, 1481 VP_FLAGS_CON_FABRIC = 3, 1482 VP_FLAGS_NAME_VALID = BIT_5, 1483 }; 1484 1485 struct vp_rpt_id_entry_24xx { 1486 uint8_t entry_type; /* Entry type. */ 1487 uint8_t entry_count; /* Entry count. */ 1488 uint8_t sys_define; /* System defined. */ 1489 uint8_t entry_status; /* Entry Status. */ 1490 __le32 resv1; 1491 uint8_t vp_acquired; 1492 uint8_t vp_setup; 1493 uint8_t vp_idx; /* Format 0=reserved */ 1494 uint8_t vp_status; /* Format 0=reserved */ 1495 1496 uint8_t port_id[3]; 1497 uint8_t format; 1498 union { 1499 struct _f0 { 1500 /* format 0 loop */ 1501 uint8_t vp_idx_map[16]; 1502 uint8_t reserved_4[32]; 1503 } f0; 1504 struct _f1 { 1505 /* format 1 fabric */ 1506 uint8_t vpstat1_subcode; /* vp_status=1 subcode */ 1507 uint8_t flags; 1508 #define TOPO_MASK 0xE 1509 #define TOPO_FL 0x2 1510 #define TOPO_N2N 0x4 1511 #define TOPO_F 0x6 1512 1513 uint16_t fip_flags; 1514 uint8_t rsv2[12]; 1515 1516 uint8_t ls_rjt_vendor; 1517 uint8_t ls_rjt_explanation; 1518 uint8_t ls_rjt_reason; 1519 uint8_t rsv3[5]; 1520 1521 uint8_t port_name[8]; 1522 uint8_t node_name[8]; 1523 uint16_t bbcr; 1524 uint8_t reserved_5[6]; 1525 } f1; 1526 struct _f2 { /* format 2: N2N direct connect */ 1527 uint8_t vpstat1_subcode; 1528 uint8_t flags; 1529 uint16_t fip_flags; 1530 uint8_t rsv2[12]; 1531 1532 uint8_t ls_rjt_vendor; 1533 uint8_t ls_rjt_explanation; 1534 uint8_t ls_rjt_reason; 1535 uint8_t rsv3[5]; 1536 1537 uint8_t port_name[8]; 1538 uint8_t node_name[8]; 1539 uint16_t bbcr; 1540 uint8_t reserved_5[2]; 1541 uint8_t remote_nport_id[4]; 1542 } f2; 1543 } u; 1544 }; 1545 1546 #define VF_EVFP_IOCB_TYPE 0x26 /* Exchange Virtual Fabric Parameters entry. */ 1547 struct vf_evfp_entry_24xx { 1548 uint8_t entry_type; /* Entry type. */ 1549 uint8_t entry_count; /* Entry count. */ 1550 uint8_t sys_define; /* System defined. */ 1551 uint8_t entry_status; /* Entry Status. */ 1552 1553 uint32_t handle; /* System handle. */ 1554 __le16 comp_status; /* Completion status. */ 1555 __le16 timeout; /* timeout */ 1556 __le16 adim_tagging_mode; 1557 1558 __le16 vfport_id; 1559 uint32_t exch_addr; 1560 1561 __le16 nport_handle; /* N_PORT handle. */ 1562 __le16 control_flags; 1563 uint32_t io_parameter_0; 1564 uint32_t io_parameter_1; 1565 __le64 tx_address __packed; /* Data segment 0 address. */ 1566 uint32_t tx_len; /* Data segment 0 length. */ 1567 __le64 rx_address __packed; /* Data segment 1 address. */ 1568 uint32_t rx_len; /* Data segment 1 length. */ 1569 }; 1570 1571 /* END MID Support ***********************************************************/ 1572 1573 /* Flash Description Table ***************************************************/ 1574 1575 struct qla_fdt_layout { 1576 uint8_t sig[4]; 1577 __le16 version; 1578 __le16 len; 1579 __le16 checksum; 1580 uint8_t unused1[2]; 1581 uint8_t model[16]; 1582 __le16 man_id; 1583 __le16 id; 1584 uint8_t flags; 1585 uint8_t erase_cmd; 1586 uint8_t alt_erase_cmd; 1587 uint8_t wrt_enable_cmd; 1588 uint8_t wrt_enable_bits; 1589 uint8_t wrt_sts_reg_cmd; 1590 uint8_t unprotect_sec_cmd; 1591 uint8_t read_man_id_cmd; 1592 __le32 block_size; 1593 __le32 alt_block_size; 1594 __le32 flash_size; 1595 __le32 wrt_enable_data; 1596 uint8_t read_id_addr_len; 1597 uint8_t wrt_disable_bits; 1598 uint8_t read_dev_id_len; 1599 uint8_t chip_erase_cmd; 1600 __le16 read_timeout; 1601 uint8_t protect_sec_cmd; 1602 uint8_t unused2[65]; 1603 }; 1604 1605 /* Flash Layout Table ********************************************************/ 1606 1607 struct qla_flt_location { 1608 uint8_t sig[4]; 1609 __le16 start_lo; 1610 __le16 start_hi; 1611 uint8_t version; 1612 uint8_t unused[5]; 1613 __le16 checksum; 1614 }; 1615 1616 #define FLT_REG_FW 0x01 1617 #define FLT_REG_BOOT_CODE 0x07 1618 #define FLT_REG_VPD_0 0x14 1619 #define FLT_REG_NVRAM_0 0x15 1620 #define FLT_REG_VPD_1 0x16 1621 #define FLT_REG_NVRAM_1 0x17 1622 #define FLT_REG_VPD_2 0xD4 1623 #define FLT_REG_NVRAM_2 0xD5 1624 #define FLT_REG_VPD_3 0xD6 1625 #define FLT_REG_NVRAM_3 0xD7 1626 #define FLT_REG_FDT 0x1a 1627 #define FLT_REG_FLT 0x1c 1628 #define FLT_REG_HW_EVENT_0 0x1d 1629 #define FLT_REG_HW_EVENT_1 0x1f 1630 #define FLT_REG_NPIV_CONF_0 0x29 1631 #define FLT_REG_NPIV_CONF_1 0x2a 1632 #define FLT_REG_GOLD_FW 0x2f 1633 #define FLT_REG_FCP_PRIO_0 0x87 1634 #define FLT_REG_FCP_PRIO_1 0x88 1635 #define FLT_REG_CNA_FW 0x97 1636 #define FLT_REG_BOOT_CODE_8044 0xA2 1637 #define FLT_REG_FCOE_FW 0xA4 1638 #define FLT_REG_FCOE_NVRAM_0 0xAA 1639 #define FLT_REG_FCOE_NVRAM_1 0xAC 1640 1641 /* 27xx */ 1642 #define FLT_REG_IMG_PRI_27XX 0x95 1643 #define FLT_REG_IMG_SEC_27XX 0x96 1644 #define FLT_REG_FW_SEC_27XX 0x02 1645 #define FLT_REG_BOOTLOAD_SEC_27XX 0x9 1646 #define FLT_REG_VPD_SEC_27XX_0 0x50 1647 #define FLT_REG_VPD_SEC_27XX_1 0x52 1648 #define FLT_REG_VPD_SEC_27XX_2 0xD8 1649 #define FLT_REG_VPD_SEC_27XX_3 0xDA 1650 1651 /* 28xx */ 1652 #define FLT_REG_AUX_IMG_PRI_28XX 0x125 1653 #define FLT_REG_AUX_IMG_SEC_28XX 0x126 1654 #define FLT_REG_VPD_SEC_28XX_0 0x10C 1655 #define FLT_REG_VPD_SEC_28XX_1 0x10E 1656 #define FLT_REG_VPD_SEC_28XX_2 0x110 1657 #define FLT_REG_VPD_SEC_28XX_3 0x112 1658 #define FLT_REG_NVRAM_SEC_28XX_0 0x10D 1659 #define FLT_REG_NVRAM_SEC_28XX_1 0x10F 1660 #define FLT_REG_NVRAM_SEC_28XX_2 0x111 1661 #define FLT_REG_NVRAM_SEC_28XX_3 0x113 1662 #define FLT_REG_MPI_PRI_28XX 0xD3 1663 #define FLT_REG_MPI_SEC_28XX 0xF0 1664 #define FLT_REG_PEP_PRI_28XX 0xD1 1665 #define FLT_REG_PEP_SEC_28XX 0xF1 1666 1667 struct qla_flt_region { 1668 __le16 code; 1669 uint8_t attribute; 1670 uint8_t reserved; 1671 __le32 size; 1672 __le32 start; 1673 __le32 end; 1674 }; 1675 1676 struct qla_flt_header { 1677 __le16 version; 1678 __le16 length; 1679 __le16 checksum; 1680 __le16 unused; 1681 struct qla_flt_region region[0]; 1682 }; 1683 1684 #define FLT_REGION_SIZE 16 1685 #define FLT_MAX_REGIONS 0xFF 1686 #define FLT_REGIONS_SIZE (FLT_REGION_SIZE * FLT_MAX_REGIONS) 1687 1688 /* Flash NPIV Configuration Table ********************************************/ 1689 1690 struct qla_npiv_header { 1691 uint8_t sig[2]; 1692 __le16 version; 1693 __le16 entries; 1694 __le16 unused[4]; 1695 __le16 checksum; 1696 }; 1697 1698 struct qla_npiv_entry { 1699 __le16 flags; 1700 __le16 vf_id; 1701 uint8_t q_qos; 1702 uint8_t f_qos; 1703 __le16 unused1; 1704 uint8_t port_name[WWN_SIZE]; 1705 uint8_t node_name[WWN_SIZE]; 1706 }; 1707 1708 /* 84XX Support **************************************************************/ 1709 1710 #define MBA_ISP84XX_ALERT 0x800f /* Alert Notification. */ 1711 #define A84_PANIC_RECOVERY 0x1 1712 #define A84_OP_LOGIN_COMPLETE 0x2 1713 #define A84_DIAG_LOGIN_COMPLETE 0x3 1714 #define A84_GOLD_LOGIN_COMPLETE 0x4 1715 1716 #define MBC_ISP84XX_RESET 0x3a /* Reset. */ 1717 1718 #define FSTATE_REMOTE_FC_DOWN BIT_0 1719 #define FSTATE_NSL_LINK_DOWN BIT_1 1720 #define FSTATE_IS_DIAG_FW BIT_2 1721 #define FSTATE_LOGGED_IN BIT_3 1722 #define FSTATE_WAITING_FOR_VERIFY BIT_4 1723 1724 #define VERIFY_CHIP_IOCB_TYPE 0x1B 1725 struct verify_chip_entry_84xx { 1726 uint8_t entry_type; 1727 uint8_t entry_count; 1728 uint8_t sys_defined; 1729 uint8_t entry_status; 1730 1731 uint32_t handle; 1732 1733 __le16 options; 1734 #define VCO_DONT_UPDATE_FW BIT_0 1735 #define VCO_FORCE_UPDATE BIT_1 1736 #define VCO_DONT_RESET_UPDATE BIT_2 1737 #define VCO_DIAG_FW BIT_3 1738 #define VCO_END_OF_DATA BIT_14 1739 #define VCO_ENABLE_DSD BIT_15 1740 1741 __le16 reserved_1; 1742 1743 __le16 data_seg_cnt; 1744 __le16 reserved_2[3]; 1745 1746 __le32 fw_ver; 1747 __le32 exchange_address; 1748 1749 __le32 reserved_3[3]; 1750 __le32 fw_size; 1751 __le32 fw_seq_size; 1752 __le32 relative_offset; 1753 1754 struct dsd64 dsd; 1755 }; 1756 1757 struct verify_chip_rsp_84xx { 1758 uint8_t entry_type; 1759 uint8_t entry_count; 1760 uint8_t sys_defined; 1761 uint8_t entry_status; 1762 1763 uint32_t handle; 1764 1765 __le16 comp_status; 1766 #define CS_VCS_CHIP_FAILURE 0x3 1767 #define CS_VCS_BAD_EXCHANGE 0x8 1768 #define CS_VCS_SEQ_COMPLETEi 0x40 1769 1770 __le16 failure_code; 1771 #define VFC_CHECKSUM_ERROR 0x1 1772 #define VFC_INVALID_LEN 0x2 1773 #define VFC_ALREADY_IN_PROGRESS 0x8 1774 1775 __le16 reserved_1[4]; 1776 1777 __le32 fw_ver; 1778 __le32 exchange_address; 1779 1780 __le32 reserved_2[6]; 1781 }; 1782 1783 #define ACCESS_CHIP_IOCB_TYPE 0x2B 1784 struct access_chip_84xx { 1785 uint8_t entry_type; 1786 uint8_t entry_count; 1787 uint8_t sys_defined; 1788 uint8_t entry_status; 1789 1790 uint32_t handle; 1791 1792 __le16 options; 1793 #define ACO_DUMP_MEMORY 0x0 1794 #define ACO_LOAD_MEMORY 0x1 1795 #define ACO_CHANGE_CONFIG_PARAM 0x2 1796 #define ACO_REQUEST_INFO 0x3 1797 1798 __le16 reserved1; 1799 1800 __le16 dseg_count; 1801 __le16 reserved2[3]; 1802 1803 __le32 parameter1; 1804 __le32 parameter2; 1805 __le32 parameter3; 1806 1807 __le32 reserved3[3]; 1808 __le32 total_byte_cnt; 1809 __le32 reserved4; 1810 1811 struct dsd64 dsd; 1812 }; 1813 1814 struct access_chip_rsp_84xx { 1815 uint8_t entry_type; 1816 uint8_t entry_count; 1817 uint8_t sys_defined; 1818 uint8_t entry_status; 1819 1820 uint32_t handle; 1821 1822 __le16 comp_status; 1823 __le16 failure_code; 1824 __le32 residual_count; 1825 1826 __le32 reserved[12]; 1827 }; 1828 1829 /* 81XX Support **************************************************************/ 1830 1831 #define MBA_DCBX_START 0x8016 1832 #define MBA_DCBX_COMPLETE 0x8030 1833 #define MBA_FCF_CONF_ERR 0x8031 1834 #define MBA_DCBX_PARAM_UPDATE 0x8032 1835 #define MBA_IDC_COMPLETE 0x8100 1836 #define MBA_IDC_NOTIFY 0x8101 1837 #define MBA_IDC_TIME_EXT 0x8102 1838 1839 #define MBC_IDC_ACK 0x101 1840 #define MBC_RESTART_MPI_FW 0x3d 1841 #define MBC_FLASH_ACCESS_CTRL 0x3e /* Control flash access. */ 1842 #define MBC_GET_XGMAC_STATS 0x7a 1843 #define MBC_GET_DCBX_PARAMS 0x51 1844 1845 /* 1846 * ISP83xx mailbox commands 1847 */ 1848 #define MBC_WRITE_REMOTE_REG 0x0001 /* Write remote register */ 1849 #define MBC_READ_REMOTE_REG 0x0009 /* Read remote register */ 1850 #define MBC_RESTART_NIC_FIRMWARE 0x003d /* Restart NIC firmware */ 1851 #define MBC_SET_ACCESS_CONTROL 0x003e /* Access control command */ 1852 1853 /* Flash access control option field bit definitions */ 1854 #define FAC_OPT_FORCE_SEMAPHORE BIT_15 1855 #define FAC_OPT_REQUESTOR_ID BIT_14 1856 #define FAC_OPT_CMD_SUBCODE 0xff 1857 1858 /* Flash access control command subcodes */ 1859 #define FAC_OPT_CMD_WRITE_PROTECT 0x00 1860 #define FAC_OPT_CMD_WRITE_ENABLE 0x01 1861 #define FAC_OPT_CMD_ERASE_SECTOR 0x02 1862 #define FAC_OPT_CMD_LOCK_SEMAPHORE 0x03 1863 #define FAC_OPT_CMD_UNLOCK_SEMAPHORE 0x04 1864 #define FAC_OPT_CMD_GET_SECTOR_SIZE 0x05 1865 1866 /* enhanced features bit definitions */ 1867 #define NEF_LR_DIST_ENABLE BIT_0 1868 1869 /* LR Distance bit positions */ 1870 #define LR_DIST_NV_POS 2 1871 #define LR_DIST_NV_MASK 0xf 1872 #define LR_DIST_FW_POS 12 1873 1874 /* FAC semaphore defines */ 1875 #define FAC_SEMAPHORE_UNLOCK 0 1876 #define FAC_SEMAPHORE_LOCK 1 1877 1878 struct nvram_81xx { 1879 /* NVRAM header. */ 1880 uint8_t id[4]; 1881 __le16 nvram_version; 1882 __le16 reserved_0; 1883 1884 /* Firmware Initialization Control Block. */ 1885 __le16 version; 1886 __le16 reserved_1; 1887 __le16 frame_payload_size; 1888 __le16 execution_throttle; 1889 __le16 exchange_count; 1890 __le16 reserved_2; 1891 1892 uint8_t port_name[WWN_SIZE]; 1893 uint8_t node_name[WWN_SIZE]; 1894 1895 __le16 login_retry_count; 1896 __le16 reserved_3; 1897 __le16 interrupt_delay_timer; 1898 __le16 login_timeout; 1899 1900 __le32 firmware_options_1; 1901 __le32 firmware_options_2; 1902 __le32 firmware_options_3; 1903 1904 __le16 reserved_4[4]; 1905 1906 /* Offset 64. */ 1907 uint8_t enode_mac[6]; 1908 __le16 reserved_5[5]; 1909 1910 /* Offset 80. */ 1911 __le16 reserved_6[24]; 1912 1913 /* Offset 128. */ 1914 __le16 ex_version; 1915 uint8_t prio_fcf_matching_flags; 1916 uint8_t reserved_6_1[3]; 1917 __le16 pri_fcf_vlan_id; 1918 uint8_t pri_fcf_fabric_name[8]; 1919 __le16 reserved_6_2[7]; 1920 uint8_t spma_mac_addr[6]; 1921 __le16 reserved_6_3[14]; 1922 1923 /* Offset 192. */ 1924 uint8_t min_supported_speed; 1925 uint8_t reserved_7_0; 1926 __le16 reserved_7[31]; 1927 1928 /* 1929 * BIT 0 = Enable spinup delay 1930 * BIT 1 = Disable BIOS 1931 * BIT 2 = Enable Memory Map BIOS 1932 * BIT 3 = Enable Selectable Boot 1933 * BIT 4 = Disable RISC code load 1934 * BIT 5 = Disable Serdes 1935 * BIT 6 = Opt boot mode 1936 * BIT 7 = Interrupt enable 1937 * 1938 * BIT 8 = EV Control enable 1939 * BIT 9 = Enable lip reset 1940 * BIT 10 = Enable lip full login 1941 * BIT 11 = Enable target reset 1942 * BIT 12 = Stop firmware 1943 * BIT 13 = Enable nodename option 1944 * BIT 14 = Default WWPN valid 1945 * BIT 15 = Enable alternate WWN 1946 * 1947 * BIT 16 = CLP LUN string 1948 * BIT 17 = CLP Target string 1949 * BIT 18 = CLP BIOS enable string 1950 * BIT 19 = CLP Serdes string 1951 * BIT 20 = CLP WWPN string 1952 * BIT 21 = CLP WWNN string 1953 * BIT 22 = 1954 * BIT 23 = 1955 * BIT 24 = Keep WWPN 1956 * BIT 25 = Temp WWPN 1957 * BIT 26-31 = 1958 */ 1959 __le32 host_p; 1960 1961 uint8_t alternate_port_name[WWN_SIZE]; 1962 uint8_t alternate_node_name[WWN_SIZE]; 1963 1964 uint8_t boot_port_name[WWN_SIZE]; 1965 __le16 boot_lun_number; 1966 __le16 reserved_8; 1967 1968 uint8_t alt1_boot_port_name[WWN_SIZE]; 1969 __le16 alt1_boot_lun_number; 1970 __le16 reserved_9; 1971 1972 uint8_t alt2_boot_port_name[WWN_SIZE]; 1973 __le16 alt2_boot_lun_number; 1974 __le16 reserved_10; 1975 1976 uint8_t alt3_boot_port_name[WWN_SIZE]; 1977 __le16 alt3_boot_lun_number; 1978 __le16 reserved_11; 1979 1980 /* 1981 * BIT 0 = Selective Login 1982 * BIT 1 = Alt-Boot Enable 1983 * BIT 2 = Reserved 1984 * BIT 3 = Boot Order List 1985 * BIT 4 = Reserved 1986 * BIT 5 = Selective LUN 1987 * BIT 6 = Reserved 1988 * BIT 7-31 = 1989 */ 1990 __le32 efi_parameters; 1991 1992 uint8_t reset_delay; 1993 uint8_t reserved_12; 1994 __le16 reserved_13; 1995 1996 __le16 boot_id_number; 1997 __le16 reserved_14; 1998 1999 __le16 max_luns_per_target; 2000 __le16 reserved_15; 2001 2002 __le16 port_down_retry_count; 2003 __le16 link_down_timeout; 2004 2005 /* FCode parameters. */ 2006 __le16 fcode_parameter; 2007 2008 __le16 reserved_16[3]; 2009 2010 /* Offset 352. */ 2011 uint8_t reserved_17[4]; 2012 __le16 reserved_18[5]; 2013 uint8_t reserved_19[2]; 2014 __le16 reserved_20[8]; 2015 2016 /* Offset 384. */ 2017 uint8_t reserved_21[16]; 2018 __le16 reserved_22[3]; 2019 2020 /* Offset 406 (0x196) Enhanced Features 2021 * BIT 0 = Extended BB credits for LR 2022 * BIT 1 = Virtual Fabric Enable 2023 * BIT 2-5 = Distance Support if BIT 0 is on 2024 * BIT 6 = Prefer FCP 2025 * BIT 7 = SCM Disabled if BIT is set (1) 2026 * BIT 8-15 = Unused 2027 */ 2028 uint16_t enhanced_features; 2029 2030 uint16_t reserved_24[4]; 2031 2032 /* Offset 416. */ 2033 __le16 reserved_25[32]; 2034 2035 /* Offset 480. */ 2036 uint8_t model_name[16]; 2037 2038 /* Offset 496. */ 2039 __le16 feature_mask_l; 2040 __le16 feature_mask_h; 2041 __le16 reserved_26[2]; 2042 2043 __le16 subsystem_vendor_id; 2044 __le16 subsystem_device_id; 2045 2046 __le32 checksum; 2047 }; 2048 2049 /* 2050 * ISP Initialization Control Block. 2051 * Little endian except where noted. 2052 */ 2053 #define ICB_VERSION 1 2054 struct init_cb_81xx { 2055 __le16 version; 2056 __le16 reserved_1; 2057 2058 __le16 frame_payload_size; 2059 __le16 execution_throttle; 2060 __le16 exchange_count; 2061 2062 __le16 reserved_2; 2063 2064 uint8_t port_name[WWN_SIZE]; /* Big endian. */ 2065 uint8_t node_name[WWN_SIZE]; /* Big endian. */ 2066 2067 __le16 response_q_inpointer; 2068 __le16 request_q_outpointer; 2069 2070 __le16 login_retry_count; 2071 2072 __le16 prio_request_q_outpointer; 2073 2074 __le16 response_q_length; 2075 __le16 request_q_length; 2076 2077 __le16 reserved_3; 2078 2079 __le16 prio_request_q_length; 2080 2081 __le64 request_q_address __packed; 2082 __le64 response_q_address __packed; 2083 __le64 prio_request_q_address __packed; 2084 2085 uint8_t reserved_4[8]; 2086 2087 __le16 atio_q_inpointer; 2088 __le16 atio_q_length; 2089 __le64 atio_q_address __packed; 2090 2091 __le16 interrupt_delay_timer; /* 100us increments. */ 2092 __le16 login_timeout; 2093 2094 /* 2095 * BIT 0-3 = Reserved 2096 * BIT 4 = Enable Target Mode 2097 * BIT 5 = Disable Initiator Mode 2098 * BIT 6 = Reserved 2099 * BIT 7 = Reserved 2100 * 2101 * BIT 8-13 = Reserved 2102 * BIT 14 = Node Name Option 2103 * BIT 15-31 = Reserved 2104 */ 2105 __le32 firmware_options_1; 2106 2107 /* 2108 * BIT 0 = Operation Mode bit 0 2109 * BIT 1 = Operation Mode bit 1 2110 * BIT 2 = Operation Mode bit 2 2111 * BIT 3 = Operation Mode bit 3 2112 * BIT 4-7 = Reserved 2113 * 2114 * BIT 8 = Enable Class 2 2115 * BIT 9 = Enable ACK0 2116 * BIT 10 = Reserved 2117 * BIT 11 = Enable FC-SP Security 2118 * BIT 12 = FC Tape Enable 2119 * BIT 13 = Reserved 2120 * BIT 14 = Enable Target PRLI Control 2121 * BIT 15-31 = Reserved 2122 */ 2123 __le32 firmware_options_2; 2124 2125 /* 2126 * BIT 0-3 = Reserved 2127 * BIT 4 = FCP RSP Payload bit 0 2128 * BIT 5 = FCP RSP Payload bit 1 2129 * BIT 6 = Enable Receive Out-of-Order data frame handling 2130 * BIT 7 = Reserved 2131 * 2132 * BIT 8 = Reserved 2133 * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling 2134 * BIT 10-16 = Reserved 2135 * BIT 17 = Enable multiple FCFs 2136 * BIT 18-20 = MAC addressing mode 2137 * BIT 21-25 = Ethernet data rate 2138 * BIT 26 = Enable ethernet header rx IOCB for ATIO q 2139 * BIT 27 = Enable ethernet header rx IOCB for response q 2140 * BIT 28 = SPMA selection bit 0 2141 * BIT 28 = SPMA selection bit 1 2142 * BIT 30-31 = Reserved 2143 */ 2144 __le32 firmware_options_3; 2145 2146 uint8_t reserved_5[8]; 2147 2148 uint8_t enode_mac[6]; 2149 2150 uint8_t reserved_6[10]; 2151 }; 2152 2153 struct mid_init_cb_81xx { 2154 struct init_cb_81xx init_cb; 2155 2156 uint16_t count; 2157 uint16_t options; 2158 2159 struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC]; 2160 }; 2161 2162 struct ex_init_cb_81xx { 2163 uint16_t ex_version; 2164 uint8_t prio_fcf_matching_flags; 2165 uint8_t reserved_1[3]; 2166 uint16_t pri_fcf_vlan_id; 2167 uint8_t pri_fcf_fabric_name[8]; 2168 uint16_t reserved_2[7]; 2169 uint8_t spma_mac_addr[6]; 2170 uint16_t reserved_3[14]; 2171 }; 2172 2173 #define FARX_ACCESS_FLASH_CONF_81XX 0x7FFD0000 2174 #define FARX_ACCESS_FLASH_DATA_81XX 0x7F800000 2175 #define FARX_ACCESS_FLASH_CONF_28XX 0x7FFD0000 2176 #define FARX_ACCESS_FLASH_DATA_28XX 0x7F7D0000 2177 2178 /* FCP priority config defines *************************************/ 2179 /* operations */ 2180 #define QLFC_FCP_PRIO_DISABLE 0x0 2181 #define QLFC_FCP_PRIO_ENABLE 0x1 2182 #define QLFC_FCP_PRIO_GET_CONFIG 0x2 2183 #define QLFC_FCP_PRIO_SET_CONFIG 0x3 2184 2185 struct qla_fcp_prio_entry { 2186 uint16_t flags; /* Describes parameter(s) in FCP */ 2187 /* priority entry that are valid */ 2188 #define FCP_PRIO_ENTRY_VALID 0x1 2189 #define FCP_PRIO_ENTRY_TAG_VALID 0x2 2190 #define FCP_PRIO_ENTRY_SPID_VALID 0x4 2191 #define FCP_PRIO_ENTRY_DPID_VALID 0x8 2192 #define FCP_PRIO_ENTRY_LUNB_VALID 0x10 2193 #define FCP_PRIO_ENTRY_LUNE_VALID 0x20 2194 #define FCP_PRIO_ENTRY_SWWN_VALID 0x40 2195 #define FCP_PRIO_ENTRY_DWWN_VALID 0x80 2196 uint8_t tag; /* Priority value */ 2197 uint8_t reserved; /* Reserved for future use */ 2198 uint32_t src_pid; /* Src port id. high order byte */ 2199 /* unused; -1 (wild card) */ 2200 uint32_t dst_pid; /* Src port id. high order byte */ 2201 /* unused; -1 (wild card) */ 2202 uint16_t lun_beg; /* 1st lun num of lun range. */ 2203 /* -1 (wild card) */ 2204 uint16_t lun_end; /* 2nd lun num of lun range. */ 2205 /* -1 (wild card) */ 2206 uint8_t src_wwpn[8]; /* Source WWPN: -1 (wild card) */ 2207 uint8_t dst_wwpn[8]; /* Destination WWPN: -1 (wild card) */ 2208 }; 2209 2210 struct qla_fcp_prio_cfg { 2211 uint8_t signature[4]; /* "HQOS" signature of config data */ 2212 uint16_t version; /* 1: Initial version */ 2213 uint16_t length; /* config data size in num bytes */ 2214 uint16_t checksum; /* config data bytes checksum */ 2215 uint16_t num_entries; /* Number of entries */ 2216 uint16_t size_of_entry; /* Size of each entry in num bytes */ 2217 uint8_t attributes; /* enable/disable, persistence */ 2218 #define FCP_PRIO_ATTR_DISABLE 0x0 2219 #define FCP_PRIO_ATTR_ENABLE 0x1 2220 #define FCP_PRIO_ATTR_PERSIST 0x2 2221 uint8_t reserved; /* Reserved for future use */ 2222 #define FCP_PRIO_CFG_HDR_SIZE offsetof(struct qla_fcp_prio_cfg, entry) 2223 struct qla_fcp_prio_entry entry[1023]; /* fcp priority entries */ 2224 uint8_t reserved2[16]; 2225 }; 2226 2227 #define FCP_PRIO_CFG_SIZE (32*1024) /* fcp prio data per port*/ 2228 2229 /* 25XX Support ****************************************************/ 2230 #define FA_FCP_PRIO0_ADDR_25 0x3C000 2231 #define FA_FCP_PRIO1_ADDR_25 0x3E000 2232 2233 /* 81XX Flash locations -- occupies second 2MB region. */ 2234 #define FA_BOOT_CODE_ADDR_81 0x80000 2235 #define FA_RISC_CODE_ADDR_81 0xA0000 2236 #define FA_FW_AREA_ADDR_81 0xC0000 2237 #define FA_VPD_NVRAM_ADDR_81 0xD0000 2238 #define FA_VPD0_ADDR_81 0xD0000 2239 #define FA_VPD1_ADDR_81 0xD0400 2240 #define FA_NVRAM0_ADDR_81 0xD0080 2241 #define FA_NVRAM1_ADDR_81 0xD0180 2242 #define FA_FEATURE_ADDR_81 0xD4000 2243 #define FA_FLASH_DESCR_ADDR_81 0xD8000 2244 #define FA_FLASH_LAYOUT_ADDR_81 0xD8400 2245 #define FA_HW_EVENT0_ADDR_81 0xDC000 2246 #define FA_HW_EVENT1_ADDR_81 0xDC400 2247 #define FA_NPIV_CONF0_ADDR_81 0xD1000 2248 #define FA_NPIV_CONF1_ADDR_81 0xD2000 2249 2250 /* 83XX Flash locations -- occupies second 8MB region. */ 2251 #define FA_FLASH_LAYOUT_ADDR_83 (0x3F1000/4) 2252 #define FA_FLASH_LAYOUT_ADDR_28 (0x11000/4) 2253 2254 #define NVRAM_DUAL_FCP_NVME_FLAG_OFFSET 0x196 2255 2256 #endif 2257
